chatel gallay used for sale

A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...

Screening machine Chauvin 13/30-2 Brand: Chauvin Type: Grizzly Screen area: 3000 x 1300 mm - 2 deckers Drive: Electric motor 22 kW

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Die Sinking Machine CHARMILES ROBOFORM 54P - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 600 mm, Cross travel y axis: 400 mm, Vertical travel z axis: 450 mm, C axis travel: 360 °, Working table size: 750x500 mm, Work tank dimension: 1200x800x460 mm, Automatic electrode change nr.: 16, Power supply: Charmilles, Max working current: 64 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem

X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg

Wire stitcher Acme Champion Model A Year 1960 Capacity 6 mm Details for blocks & pamphlets Available direct

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

AGIETRON HYPERSPARK 2 HS Sinker 2008 Design with lowerable working container Work table with 50 mm hole grid travel X/Y/Z 350x250x350 mm -Workpiece size: LxWxH=650x580x250 mm or 820x420x250 mm Integrated C axis, for rotation, indexing and erosion Electronic laser measurement of all axes Detection of the electrode and workpiece position 1 set of documentation (CD + manuals) AGIEVISION 5 Control with multitasking DNC interface with transmission protocolXon/Xoff and LSV2 2 serial interfaces RS 232C for DNC and master computer LAN connection for data exchange via in-house network RJ45 3 drives: hard drive, 3 1/2" floppy disks, CD-ROM Without tool changer

CHARLES ROSS Mixer HSM-100LH2 High speed HSM-100LH-2 Control mc series AC Tech with enclosure hydraulic control HIGHSHEAR MIXER Equipment was excellently maintained. Partly with replacement knives You buy a device here

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 800 mm Table width: 560 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 450 mm Cross traverse (Y-axis): 320 mm Max. distance from the table and sleeve: 640 mm Working vessel:length inside: 1195 mm Width: 800 mm Height: 410 mm Working head: way rapid feed (Z): 410 mm Dielectric aggregate: Contents: 560 l Height: 870 mm Width: 2110 mm depth: 750 mm net weight: 300 kp Generator: Power: 128 A Height: 2100 mm Width: 650 mm depth: 600 mm Total power required: 7.0 kVA Operating voltage: 380 Volt Machine´s weight about: 320 kg Machine´s weight about: 4100 kg Overall dimensions machine: Length: 3700 mm Width: 2110 mm Height: 2700 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 500 mm Table width: 400 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Max. distance from the table and sleeve: 150/450 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Working head: way rapid feed (Z): 300 mm max. electrode weight: 50 kg Dielectric aggregate: Contents: 410 l Generator: Power: 64 A Total power required: 7.5 kVA Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1900 mm Width: 1690 mm Height: 2800 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 750 mm Table width: 600 mm Dimension of the workpice: Length: 1200 mm Width: 850 mm Height: 400 mm Table load max.: 1600 kg Longitudinal traverse (X-axis): 600 mm Cross traverse (Y-axis): 400 mm Height adjustment (Z-axis): 450 mm max. electrode weight: 100 kg Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4500 kg Overall dimensions machine: Length: 3150 mm Width: 2750 mm Height: 2960 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

Wire EDM AGIE CHARMILLES CUT 30P Used machine in excellent condition Year 2010 dimension table 950 x 630 mm working tank 1260 x 945 x 675 mm max size piece 1050 x 850 x 350 mm max size weight 1000 Kg. Axis X 600 mm Y 400 mm Z 350 mm U 100 mm V 100 mm Operating System Windows XP Overall dimension 3100 x 2800 x 2325 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A MACH-id     4003 MAKE         Charmilles TYPE           ROBOFORM 200 YEAR          1990 DIMENSIONS Length    3000 mm Width     1600 mm Height    2500 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   MACH-id   4000 MERK    CHarmilles TYPE      Roboform 31 YEAR      1996

Charmilles 31 EDM Wire Cutting Machine Machine is in good working condition

Charmilles Robifil 640 CC EDM Wire Cutting Machine X : 800 mm Y : 550 mm Z : 510 mm

Charmilles Robofil 440 SL EDM Wire Cutting Machine X : 550 mm Y : 350 mm Z : 400 mm

CHARMILLES Type P25 die-sinking EDM Die-sinking EDM. never used. The car turns on

New CHARRIAU MPV-2000 refrigerated tank (2022). Never had liquid. Adjustable agitation (operating time and interval), adjustable temperature. More information on request.

Screening machine Allis Chalmers Type 12/40-2 4000 x 1200 mm – 2 decks

Chauvin screening machine 21/50-1 Screen area: 5000 x 2100 mm - 1 decker Screen opening: 55 x 70mm Drive: Electric motor 11 kW Incl.: Springs with spring console & steel base.

This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.

This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.

This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.

This Challenger FY-3200AT Plus-H4 3D Printer was manufactured in the year 2021 in China. The machine has a range of 3000 mm.

Turret milling machine LIH CHANG 942-S - capacity 760x300x400 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1067x230 mm, Longitudinal travel x axis: 760 mm, Cross travel y axis: 305 mm, Vertical travel z axis: 410 mm, Spindle taper: 30 ISO, Spindle speed: 80 - 2720 rpm, Number of spindle speeds: 8, Spindle motor power: 1,5 Kw, Quill spindle travel: 127mm, Number of working feeds: stepless by DC motor, Weight: 1.500 Kg, Accessories: Digital Read Out

Heraeus V?tsch Climatic chamber VTRK 500. Inner dimensions 745 x 880 x 765mm. Capacity 500L. Door with porthole 350 x 350 / wipers Temperature 10-90?C. Fridge unit in the lower part, under the enclosure Space for storage tank approx. 10l of distilled water. Electrical power 3.1 kW / mono 220 V Overall dimensions: 1100 X 1400 X 2100

Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive Infeed table 1m70. long

-First commissioning in 1985; Attention! There is a defect on the changer, C-axis shows temporary errors; -Technical information without guarantee; -X-axis: 320mm; -Y-axis: 220mm; -Z-axis: 320mm; -C-axis: 360°; -Working surface: 560x400mm; -Workpiece weight: 500kg; -Usable area: 880x550mm; -Control: Charmilles; -Weight approx. 4500 kg; -Dimensions (LxWxH) approx. 3000 x 1610 x 2460 mm; -We offer this machine as a spare parts donor.

Tom Chandley Compacta deck oven Serial: 20C18AA02 2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph

Screening machine Nordberg Chauvin 14/45-3 Screen area : 4500 x 1400 mm - 3 deckers Incl. Electric motor and springs

CHARMILLES FORM 20 MANUAL - 1990 Die Sinking EDM machine

AGIE CHARMILLES wire cut AC2 VERTEX year `2010

Servo valve, hydraulic valve HYDRAULIQUE CHATEAUDUN (FRANCE) Type: D 080 211-9 Model: 0 080 (BJ) R 03-99 121 NT 5510302 nom 100 l/min

General: Year of construction: 1998 Travel: X 350 mm, Y 250 mm, Z: 300 mm Table size 500 x 400 mm Workpiece dimensions Max. 500 kg Weight approx. 2,350 kg Other equipment and included accessories: Tool changer Tool holder system 3R

Key data: 750 mm, 500 mm, 64 A

Inv. Num. : 5896 Type: Roboform 54P Producer: Charmilles Created: 2002 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg Equipment: Tool changer C-axis

Key data: 750 mm, 500 mm, 64 A

Inv. Num. : 5897 Type: Roboform 54P Producer: Charmilles Created: 2000 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg New Source

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Chainflex, data cable with plug -Type: CF11.006.D Art.-Hst. 6FX8002-2CA34-1,3M-I -Length: 1.3 m -Weight: 0.4 kg

x-travel: 650 mm y-travel: 650 mm z-travel: 550 mm Control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. table diameter: 600 mm a-axis: +91/-120 ° c-axis: 360 ° number of spindle speeds: 20.000 U/min/rpm tool adaptor: HSK-A63 spindle drive: 39 kW Internal cooling system: 18 - 70 bar chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Charly Robot 3-axis CNC milling machine With computer and integrated GALAAD software Useful format 1000 x 1500 mm Weight approximately 1500 kg In good condition, works every week for workshop production Arrange for collection by you

Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked

Charmilles Robofil 310 CNC type Year: 1994 X axis Axis shift of 400 mm Axis Y axis shift 250 mm Z-axis travel 400 mm The stroke of the U axis is 400 mm The stroke of the V-axis 250 mm We attach 8 cartons of brass wire 0.25 and all the instructions including one in Polish

Charmilles Robofil 4020 Year 1996 Travel: X-450, Y-320, Z-270, U-100, V-100 Max cutting angle: 30 degrees Max workpiece weight: 500 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detal - 990 x 505 x 270

Charmilles D10 EDM sinking machine it is equipped with an Isocut E20 head, an Isopulse 80 generator with Microfin and an X and Y Iskra visualization. the machine works and is in very good general condition but has a problem with the hydraulic descent regulator, the machine has difficulty descending (this is a known problem on these machines) but it is surely repairable. the machine is supplied complete ready to use, with numerous tool holders + electrodes of all types and with the original documentation.