We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Table dimensions ( x-y/mm) 600 X 400 Type Wire Edm Stroke ( X/mm) 450 Stroke ( Y/mm) 320 Stroke ( Z/mm) 162 Type of controll Charmilles Location Turin Italy Machine Conditions Ce Marked Model 6030 Si Year of made 2002 automatic wire feed dielectric filtration and tank dielectric tank 900 l workpiece dimensions x: 1270 mm y : 800 mm z: 475 mm weight of the workpiece: 800 kg
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
used
Key data: 450 mm, 320 mm, 162 mm
Control FJ.37X Travel X/Y/Z 450/320/162 mm Travel U/V +/- 50 mm Workpiece size X/Y/Z 1100/760/360 mm Table load 500 kg Weight 3200 kg Wire guides ø0.25 and ø0.30 Base strips for EROWA tension beams Wire Alignment Block Wire threading module
used
Inv. Num. : 7280 Type: FORM 2-LC ZNC Producer: Charmilles Generated:- Parameters: Table dimensions: 500x400 mm Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 200 mm Max. travel length of the Z-axis: 200 mm Container size: 820x500 mm
used
Key data: 750 mm, 500 mm, 64 A
Inv. Num. : 5897 Type: Roboform 54P Producer: Charmilles Created: 2000 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg New Source
used
Key data: 750 mm, 500 mm, 64 A
Inv. Num. : 5896 Type: Roboform 54P Producer: Charmilles Created: 2002 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg Equipment: Tool changer C-axis
used
General: Year of construction: 1998 Travel: X 350 mm, Y 250 mm, Z: 300 mm Table size 500 x 400 mm Workpiece dimensions Max. 500 kg Weight approx. 2,350 kg Other equipment and included accessories: Tool changer Tool holder system 3R
used
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.
used
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.
used
X-travel: 550mm, y-travel: 350mm, z-travel: 400mm, U-travel: 550mm, V-travel: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: approx. 60,000h, with documentation, an on-site inspection is possible.
used
Description: Table length 500 mm Table width 400 mm Longitudinal traverse (X axis) 350 mm Cross traverse (Y axis) 250 mm Work boat: inside length 800 mm Width 550 mm Height 370 mm Working head: ITS fast feed path (Z) 300 mm Total power 5 kVA Dimensions (L x W x H) 2000.0 × 1700.0 × 2400.0 Weight 2500 kg Overall machine dimensions: Length 2000 mm Width 1700 mm Height 2400 mm CNC type CHARMILLES Table length 500 mm Table width 400 mm Max. workpiece length 800 mm Max. workpiece width 550 mm Max. workpiece height 370 mm Max. workpiece weight 500 kg Max. generator current 64 A' x-motion: 350 mm, y-motion: 250 mm, z-motion: 300 mm, table surface area l x w : 500x400 mm, total power requirement: 5 kW, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,700 x 2,400 mm
used
Description: X-axis: 800 mm // 900 mm/min Y-axis: 600 mm // 900 mm/min Z-axis: 400 mm // 900 mm/min U/V: 60 mm workpiece: X: 1300 mm workpiece: Y: 910 mm Workpiece: Z: 400 mm Max. table load: 2300 KG Main electronic connection: 400 V / 50 HZ / 3P total power requirement: 10 KVA air pressure: 6 bar dielectric tank: 250 liters z-motion: 400 mm, x-motion: 800 mm, y-motion: 600 mm, weight approx.: 4,700 kg, Approx. Onsite Dimension. (l x w x h): 1,950 x 2,550 x 2,000 mm
used
Description: Stroke X-Y-Z: 450 x 320 x 175 mm stroke axis U and V: ± 50 mm min displacement: 1 [µm] max displacement speed: 0,015 m/s piece maxi height: 200 mm piece maxi weight: 800 kg piece maxi dimensions: 1 100 x 760 mm clearance angle: 0° - 30 z-motion: 175 mm, x-motion: 450 mm, y-motion: 320 mm, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 2,100 x 2,400 mm
used
This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.
used
CHARMILLES ROBOFORM 550 - 2005 Die Sinking EDM machine
used
This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.
used
This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.
used
This CHARMILLES Robofil 2020 SI Erosion Machine was made in 1996 in Switzerland. It has been working for approximately 73000 hours. It operates in solid conditions without any problems and can be inspected under production. In the delivery scope all standard accessories are available (except clamping devices). For more information see PDF attached.
used
This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.
used
This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.
used
Fanuc CNC model Automatic threading yes Immersion EDM type Maximum wire inclination +/- 30° 400mm X Axis Travel 400 mm Y Axis travel 300 mm Z Axis travel 400 mm U Axis travel 500 mm V Axis travel 400 mm Maximum piece dimensions 900 x 600 x 400 mm Max piece weight 1000 kg
used
CHARMILLES ROBOFIL 510 - 1995 Wire cutting EDM machine
used
Die Sinking Machine CHARMILES ROBOFORM 54P - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 600 mm, Cross travel y axis: 400 mm, Vertical travel z axis: 450 mm, C axis travel: 360 °, Working table size: 750x500 mm, Work tank dimension: 1200x800x460 mm, Automatic electrode change nr.: 16, Power supply: Charmilles, Max working current: 64 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem
used
CHARMILLES Type P25 die-sinking EDM Die-sinking EDM. never used. The car turns on
used
used
Charmilles Robofil 440 SL EDM Wire Cutting Machine X : 550 mm Y : 350 mm Z : 400 mm
used
Cross table controlled, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Transfer: in the current condition as seen -Y axis: measuring rail is defective -Cross table: comes from an erosion machine -Table surface: 450 x 340 mm -Travel: X 280 mm/Y 170 mm -Dimensions: 1000/1130/H950 mm -Weight: 728 kg
used
Machine is in good condition X : 350 mm Y : 250 mm Z : 350 mm
used
Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked