We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,430 used machines on RESALE, but how to find them? Machine Search
used
Maximum pressure: 95 tons Year of construction: 2008 Pressing force: 115 tons/m² Number of ties: 4-fold vertical Duct cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Power supply: 400 V/ 75 kW Bale tying: automatic Specifications No-load capacity: max 340 m³ / hour Theoretical throughput to density 35 kg/m³) 11.5 tons/hour Theoretical throughput to density 60 kg/m³) 20 tons/hour Theoretical throughput to density (100 kg/m³) 32 tons/hour Brief description of the features: • Open hopper allows filling with the conveyor belt • Knife on the press plate and on the frame of the press to cut off the excess raw material • Automatic rod • Automatic channel regulation • Choice of the length of the finished bale • Compact hydraulic power unit with low noise level emissions • Press plate stably guided on 8 rollers ...
used
Side channel blower, ring blower, vacuum pump -Drive: 0.75 kW -Feed rate: 130 m3 / h -Max. Compression pressure: 195 mbar -Speed: 2800 rpm -Number: 2x pumps available -Price per piece -Dimensions: 320/280 / H420 mm -Weight: 16 kg / piece
used
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, with coolant channel -Support area: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm -Weight: 239 kg
used
2-channel input terminal for resistance thermometer BECKHOFF KL3202 2x input for PT100 (RTD) 3-conductor technology 16 bit 24 V DC DIN rail mounting New !DIN rail mountingbr /br /New ! Dimensions: 100 x 70 x 15 mm dimensions ( input terminal ): 100 x 69 x 15 mm Dimensions (packaging): 105 x 75 x 20 mm
used
4 Channel Digital Input Terminal + Bus End Terminal BECKHOFF Input Terminal: KL1104 4x Digital Input 3.0ms Filter Time 24V DC Bus End Terminal: KL9010 DIN Rail Mount New ! Dimensions ( input terminal ): 100 x 69 x 15 mm Dimensions ( packaging ): 126 x 104 x 72 mm
used
Side channel pump, feed pump -Self-priming pump -Coupling -Order No.: 32175/90
used
two-channel multifunction meter HENGSTLER Tico 732 0 732 002 ( 0732002 ) display: 6-digit operating voltage: 12 - 24 V DC, 100 mA ( 0.0.) 1 A ) output voltage: 12 - 24 V DC, 30 mA ( 0.03 A ) switching capacity: 30 V DC, 5A / 250 V AC, 5 A for panel mounting 45 x 45 mm New, with supports ! Dimensions ( counter, without frame ): 103 x 48 x 48 mm Dimensions ( packaging ): 155 x 120 x 80 mm
used
Powerful band saw for cutting tubes and round material in a multi-channel process with symmetrical material infeed and discharge on both sides; - 9 on both sides; -Assignable pipe channels - Max. pipe length 8,000 mm; - Cycle time approx. 90 sec / stroke = 5 sec / h; - max. section length 100 mm; - diameter 20 - 100 mm; -Materials: structural steel, carbon steel, low-alloy steel, bearing steel (especially 100Cr6); -Pipe dimensions/pipe sections; - External tube Ø 25 - 128 mm; - Pipe wall thickness 3.2 - 16 mm; - Pipe length 6,000 mm; - Operating instructions available; -Required footprint for all components (with roller conveyors) was 7,000 x 16,200 mm.; -Roller conveyors are no longer available!;
used
Type: 21846, Y.O.M.: 1982, 0.2 kW, U-Trog gutter, top open, magnetic drive: EVS 8, infinitely adjustable, mounted on base, separates round from angular units.
used
U-trough chute (dimensions: 500mm x 1000 mm long). Magnetic drive: EVS 8 Nr. 1646 with variable speed. On steel construction. Separates round from angular aggregates (rejects).
used
MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...
used
Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF
used
Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!
used
Length: 1,500 mm Width: 250 mm Stainless steel With intermediate sieve, perforation 2 mm, fine and coarse fraction. Air pressure drive
new
Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...
used
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm.
used
Work surface: approx. 700 x 1,600 mm without drive Power requirement approx. 2 x 1.5 kW unused
new
Rotary union, 8 channels, Rotopack MC, GAT, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition. For 8 channels Up to 450 bar For oil, air, emulsion, water, gases, rough, fine vacuum Max 500rpm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
used
Specifications Maximum pressure: 82 tons Year of construction: 2012 Pressing force: 97 tons/m² Number of bindings: 5 - fold vertical Trunking cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Weight: approx. 25 tons Power supply: 400 V/ 55 kW Bale binding: automatic Press capacity at idle: max 576 m³ / hour Press capacity under operating conditions: max 267 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9 tons/hour Theoretical throughput to density 60 kg/m3: approx. 14 tons/hour Theoretical throughput to density 100 kg/m3: approx. 21 tons/hour
used
Specifications Maximum pressure: 85 tons Pressing force: 103 tons/m² Trunking cross-section: 750 x 1100 mm Power supply: 400 V/ 45 + 30 kW Year of construction: 1992 Number of bindings: 4 - fold vertical Dimensions of the tailgate: 1020 x 1750 mm Weight: 26 tonen Bale binding: automatic
used
Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual
used
Manufacturer: AXIS Type: 703MG7.5T Capacity: 3420 m3/h Vacuum: -270 mbar Operating pressure: 260 mbar Power: 7.5 kW
used
Rietschle, Herz, Elektror, Stephan Simens-Elmo ... separate images, data and videos available All Function Tested
used
Type: ELMO-G 2BH1 490-1AH13 2-flutig pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V Frequency 50/ 60 Hz Protection class: IP54 New !
used
Manufacturer: Rietschle Type: SKG 214-2.02 with intake filter Power: 4 kW Speed: 2850 rpm voltage: 230-400 V Frequency: 50 Hz hot air used, tested !
new
High-pressure pump, pump for baler HSM 500.1 VL with 7.5 kW motor
new
Hydraulic power pack pump, pump for the baler HSM 1160 Plus
used
Pressing pressure 16 tons Specific pressing force 46 N/cm2 Filling opening W 620 x L 1000 mm Bale cross-section W 700 x H 500 mm Bale weight at 1200 mm length (depending on material) up to 90-220 kg Theoretical throughput without oil cooler approx. 62 m3/h Practical throughput without oil cooler approx. 37-43 m3/h Drive power 11kW Weight approx. 4.5 t Born in 1999 Machine No. 29335 / 6607P00648 Colour in RAL RAL9002
used
The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.
used
Pressing pressure 8.2 t Specific pressing force 33 N/cm2 Throughput theoretically / practically without oil cooler approx. 18m3/h / 11m3/h Filling opening W450 x L 700 mm Bale cross-section W 500 x H 500 mm Bale length adjustable in 4 steps 400 – 600 mm Bale weight at 600 mm length (depending on material) 30-60 kg Drive power 4 kW Control HSM Slide Control Left side of the system Dimensions of the machine L 3935 x W1150 x H1405mm Weight approx. 900 kg Colour in RAL Grey Masch.- Nr. 28921/ 6424P02073 Year of construction 2007 Off the pitch as seen
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1200 mm Year of construction: 2015 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 6.7 tons/hour Theoretical throughput to density 50kg/m3: 9 tons/hour Press capacity: max 190 m³/h
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1050 mm Year of construction: 2020 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 8.5 tons/hour Theoretical throughput to density 50kg/m3: 11.6 tons/hour
used
Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional
used
Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance
used
Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic
used
Description: Includes 2 Solatron buttons Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 5 kg
used
Description: Power: 2 x 2200 watts Approx. Onsite Dimension. (l x w x h): 800 x 800 x 400 mm, weight approx.: 10 kg
used
Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones
new
TO WHOM WITH MAY CONCERN; WE HAVE 12 PCS NEW UNUSED WOODWARD LINKNET 6 CHANNEL MODULES AT OUR STOCK PLS FIND LIST WITH PART NUMBERS ON BELOW 9905 - 973 3PCS 9905 - 969 3PCS 9905 - 968 2PCS 9905 - 970 1PCS 9905 - 971 1PCS 9905 - 973. 2PCS PLS REFER SOME PICTURES ON ATTACHE . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
used
Clever thermoforming machine with 2-channel scale, it is new and only worked for 3 years and then it was stopped for more than twenty years. Scale included
used
A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content vacuum t ...
new
OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...
used
Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel
used
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
used
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
used
Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...