channel used for sale

Diesel particle filter cleaner, diesel particle cleaner, particle cleaner, particle filter -Air heater: Leister type 8D5 -Power: Air heater 5000 1x380-440V~ 7500-10000W max.23A -Side channel compressor -Quantity: 2 pieces of soot filter regenerator available -Price: piece

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling flame straightening -Drainage channel and water pump -Roll diameter: Ø 180 mm -Drive: PIV gearbox -electric: adjustable -Load capacity: 1 to -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Hand switch -Counter bearing: laterally adjustable -Dimensions drive: 3600/820/H850 mm -Dimensions counter bearing: 2950/820/H850 mm -Own weight: 1300 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: Flame straightening steel pipes or shafts with flame and water cooling -Drainage channel and water pump -2x: counter holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Own weight: 500 kg

Temperature sensor, channel temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system -Temperature sensor: temperature sensor -Type unfortunately without type designation -Temperature range: 20 - 80 °C -Measuring probe: length 150 mm -Cable length: 8 m -Quantity: 18x temperature sensors available -Price per piece -Transport dimensions: 200/180/H70 mm -Weight: 0.2 kg/pc.

Number of working axes - 6 linear + 2x C-axis The range of diameters of cylindrical bars (min./max.) - 3-20 Workpiece length: - fixed guide bush - 250 mm - motorized guide bush - 210 mm - without a guide sleeve - 45 mm Main spindle speed - 12,000 rpm. Main spindle drive power - 2.2 / 3.7 kW Counter spindle speed - 12,000 rpm. Counter spindle drive power - 1.5 / 2.2 kW Rotational speed of the motorized guide sleeve - 200 - 12,000 rpm. Number of tools - 39 Number of powered tools - 15 The cross-section of the shank of turning tools - 16x16 mm Rotational speed of driven tools - 8,000 rpm. Drive power for tools driven on the front support - 0.75 kW Drive power for tools driven on the rear support - 1 kW Drive power of driven tools for processing the other side - 0.75 kW Oil pan capacity - 165 liters Oil pump power - 250W Installed p ...

Schälomat KOMBI, fully automatic peeling machine for caliber 12-40, from 4 cm in length, Compressed air connection required, air consumption 6 bar pressure, capacity: 600 - 800 kg / hour depending on the product, Standard guide tube size 36, suction with reinforced side channel fan, water tray, Water system/ water flow

Single spindle lathe 1) machine information Max machining diameter: 16 mm Maximum processing length: 200mm Motor power: 3.7 kW Spindle speed: 15,000 rpm Shaft C index: 0.001° Pickup spindle Max machining diameter: 16 mm Maximum processing length: 80mm Motor power: 1.1 kW Spindle speed: 10,000 rpm Shaft C index: 0.001° Power tools on vertical support Speed: 6,000 rpm Motor power: 0.4 kW Number of tools: 4 Tool system Turning tools: 5 Drilling tools (front): 4 Drilling tools (rear): 4 Tool holder, sleeves (diameter): 20 mm Tool holder, turning steels (shank section): 12 mm 2) bar loader information: minimag FMB 18 Material passage in the guide channel: from 2 to 13 (16) mm - (maximum diameter of the feed bar: 18 mm) Power requirement: 1.5 kW Maximum feeding force: 300 N (infinitely adjustable) Insertion speed: 0 to 300 mm/s (adjustable) Retur ...

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

Scienion Automated Media Dispenser sciFLEXARRAYER S3. 4 channel system. For smaller volumes. With PC and software . production of custom microaray, production of chips for research applications and production of diagnostic kits Dispense Volume 30 – 800 pL/drop No. of Dispense Capillaries From 1 to 8 PDC channels Distance Dispense Capillaries 4.5 or 9 mm increments Target Holder 200 x 300 mm or 246 x 300 mm Capacity Up to 4 MTPs or 36 standard glass slides Axis system X-Y-Z spindle drives Resolution (step size) 5 µm Precision < 5 µm Accuracy < 15 µm Options Live stream camera, vaccum target holder, online target alignment, online array QC software Dimensions (L,W,H) with enclosure 760 x 850 x 650 mm Weight 130 kg

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...

machine has been completely refurbished EMC2 electronic computer cutting programmes Monitor display 6-channel light guards two hand safety cutting back table guarding optical cutting line indication air table slot cover at back table side tables (2) 2 knives, documention, el. diagrams

Silberhorn 6-Station Rotary Table System In this rotary table cleaning system, the cleaning processes run in parallel and in the highest quality: Station 1: Loading and unloading Station 2: Cleaning with tank 1 Station 3: Rinsing with tank 2 Station 4: Rinsing with tank 2 Station 5: Pre-drying with side channel compressor Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large series. Installation area: approx. 3,600 mm x 3,530 mm x 6,900 mm (W x H x L) Goods window: approx. 450 mm x 300 mm x 150 mm Areas of application: Cleaning of series and large series Doors of the stations equipped with safety glass – this facilitates process observation Cleaning cycles of less than 30 seconds can be achieved Goods windows also for large parts Very robust and precise design of the system. This makes it possible to ...

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Heidelberg Suprasetter A74 Fully Automatic with ATL and Plate Processor Automatic plate input by Auto Top Loader (ATL) with automatic slip sheet removal; automatic transport via conveyor to online-processor Age: December 2007 Max. size: 67 x 75 cm Min. size: 24 x 24 cm Counter: 134,000 exposures Type: Suprasetter A74 (4up) Performance: 14 Plates/hour 1 Laser Head 64 Diodes Resolution: 2540 dpi Fully Automatic ATL Transport Channel Suction device Punch module With workstation, 22" Monitor Kodak Polychrome Mercury 850 Plate Processor with stacker

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

Round and long caster SUPERBA Model: SU Compact Combined circular and long knitting in one machine long effective channel 2500 mm max. bread length 500 mm Weight range 500 to 2000g Machinery on the move Capacity 800 - 2000 pieces/h with extra flour Connection 400V, 3 kW, 16A-CEE plug Dimensions: 2000 x 960 x 3500 mm, HxWxD Used machine overhauled 6 months warranty Many more bakery machines in stock!

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...

Machine type: Two-roll cylindrical bending machine for gutter production Condition: good Offer Type: Used Machine Specifications: Capacity: 2040 x 1.0 mm Drive type: el./mech. Propulsion: 0.8 kW Remark: with 4 shafts for different Channel diameter: 55, 60, 70, 85 mm Weight: 550 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Temperature sensor, channel temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system, temperature transmitter -Manufacturer: Alfa Laval, temperature sensor control system unused in original packaging -Type: TT1 Art.no.: 597256 01 -Var.no..: 90/00555033 -Measuring probe: screw-in length approx. 50 mm, see photos -Quantity: 3x temperature sensors available -Price per piece -Dimension: 160/110/H70 mm -Weight: 0.4 kg/pc.

Cooling Tunnel Cooling Channel Sollich Model: MK 420 approx. 9000 mm long, band 420 wide Built-in cooling unit Connection 400V, 16A-CEE plug Machine

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 805 Gathering Machine, AGE: 2016, Basic Frame with 16 Gathering Stations, Gathering For Folded Sections And Single Sheets Possible, Mechanical And Electrical De-Coupling Of Each Station Possible, Air Center Vacuum And Compressed Air Supply For Gatherer, Reject Unit AS Raceway/Transfer, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder, Perfect Binder: Kolbus KM 600, AGE: 2016, 21 Clamps With Co-Pilot Touchscreen, TFT Visualizing Monitors With Graphic Operator Guidance, Milling/Brushing, Equalizing Milling, Notching And Brushing Units, Kolbus LH370 EVA Hot-Melt Pre-Melt Unit, EVA Hot-Melt Roller Type Spine Gluing Unit On Mobile Base, PUR Spine Glue With Nordson Pre-Melter, EVA Hot-Melt Side Glue Unit With Controlled Cut-Off, I.R. Heating In Radius For Increased Glue Open Time, RA 49.A Pile ...

• For hard gelatine capsules • Output max. 120,000 capsules/h • Available formats for capsule sizes 00, 0, 0el, 1, 2, 4 • Available dosing rings for pellets/microfilm tablets and dosing station for powder/granules • Deionisation for static powders • Sample weight control by Sartorios balance, automatic operation, with control via PLC for MG2 dosing, regularly calibrated • Capsule hopper • Empty capsule sorting with lifting device for deformed capsules • Tricaps finished capsule sorting machine for deformed capsules • Bulk suction and powder feed via Volkmann vacuum devices with various suction lances for different products • Separate suction unit with side channel blowers • Only H1 and FDA lubricants from Klüber • Regular maintenance by MG2 and own personnel (monthly, ¼ yearly, yearly, by the hour) • Complete spare parts package for 4,000 h maintenance availa ...

automatic baler Manufacturer: PRESONA Type: LP 50 EH 2 Year of construction: 2005 specifications: Press force: 50 t Specific pressing force: 6.31 kg/cm² Drive power: 37 kW Throughput: 340 m³/h Infill opening: 1,250 x 1,100 mm Channel format: 720 x 1,100 mm (H x W) Bale weights: up to approx. 400-550 kg Setting: 5-fold vertical Oil tank: approx. 600 ltr. capacity Bale weight : up to 550 kg depending on material and length Machine dimensions: approx. 8,200 x 2,800 x 3,900 mm (L x W x H) Machine weight: approx. 18 t

Siemens MRI Avanto Fit 1.5 T Channel 48 Manufactured 2013

cutting diameter: 320 mm capacity 90 degrees: flat: 470 x 320 mm capacity 45 degrees: round: 320 mm capacity 45 degrees: flat: 300 x 320 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 190 x 320 mm saw band length: 4335 x 32(34) x 1.1 mm cutting speed: 20 - 90 m/min total power requirement: 2,53 kW weight: 1296 kg range L-W-H: 2400 x 1506 x 2000 mm Furnishing: - stepless speed adjustment of the saw band - Handwheel for saw band tension - stable machine stand in welded construction - Rotary table for miter adjustment - Fast / precise setting of the miter areas - Quick release material - Material support table with circumferential water channel - clear control panel for electrical and hydraulic central control - coolant device - Required instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Depalletizer ACMI Stratos for 7000 b h for glass bottles This used depalletizer has been disassembled in September 2021 but is in perfect condition The floor space requirement for it is around 20 m2 complete with a table for round bottle alignment safety barriers and pallet conveyors This used depalletizer is automatic i e human intervention is only needed in the beginning to introduce the pallet of empty bottles into the appropriate space Only the cutting of the film that wraps the bottles and removing the plastic interlayer separator is required After this the machine picks up an entire layer of empty bottles and lifts them and moves them all together and deposits them on the connected automatic bottle extraction table This is all motorized and synchronized with the movement of the depalletizer during unloading In order to it is used to align the bottles coming out of the used dep ...

Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001 Rinser Automatic CALIPSO 63mm 2 450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle 2 channel rinser for steam sterilisation Support structure completely covered with AISI 304 stainless steel sheets AISI 316 stainless steel gripper elements with jaws made of food grade material AISI 316 stainless steel spray nozzles and spray valves Stainless steel drip tray with drain line pressure reducer for rinsing agent total treatment time at 15 000 bph 12 seconds Filler Low vacuum filling machine model ENOICA 72 2800 mm with 72 filling valves Ring bowl completely made of stainless steel AISI 304 bowl bottom with slope filling valves completely made of stainless steel AISI 316 Electric filling bowl height adjustment by push buttons on the control panel of the machine Electronic filling level probe Endress Hauser ...

12 Stations 1571, Hand Feeding Station, Sheet Control System, Mechnical Double And Sheet Missing Control, Muller Martini 1536 Criss Cross Delivery, M-No. 94.01668.01, Year 1996, Mechanical Speed: 5000 cycles/hour, Format: Back Lenght: 120-450mm, Book Width: 100-320mm, Book Thickness: Loose Book Blocks: Max. 60mm, Channel Passage: Max. 85mm, Paper Thickness: Max. 4mm, Standard Accessories

diameter: 26 mm length: 3200 mm Control: total power requirement: 1 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 4,5 x 0,8 x 1,35 m Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Channel baling press, already dismantled, 11,000kg, Bj. 1985, 35Kw, ready for collection from the Vienna location

General SKU071F429 LocationBarneveld MakeAlfa Laval Thermal Nevers TypeSpiral Heat Exchanger 111 S No.18855 Year of construction1991 Material Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure tubes5 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity27/30 Ltr (Channel A/B) Max. temperature200 Degr. C. Information Floorspace0,9x0,6 M Total height0,8 M Weight300 KGShell and tube heat exchangersAlfa LavalHeat exchangers > Shell and tube heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

TECHNICAL DATA Net weight: Kg 1330 Length: mm 2400 Width: mm 1550 Height: mm 1870 Voltage: Volt 230/400 Power: Kw 4 Frequency: Hz 50 PRODUCTION CHARACTERISTICS Production up to 48.000 vials/h Min. height vial: 20 mm Max. height vial: 140 mm Min. diameter vial: 7,5 mm Max. diameter vial: 36 mm Pressure: 2 bar The ESA series labelers apply self-adhesive labels from the reel to bottles and vials, cartridges and other unstable containers. All electrical, electronic and PLC components are integrated into the machines to save space. These continuous motion labellers have an extremely compact design. The label dispenser has a modular design and can be equipped with both intermittent motion and continuous motion printing systems. For added convenience and reliability, the functionality of the label dispenser can be enhanced by a number of additional controllers and wor ...

General SKU071F415 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5849 Year of construction1985 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU071F418 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU071F416 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU071F419 LocationBarneveld MakeAlfa Laval Thermal Nevers TypeSpiral Heat Exchanger 111 S No.16828 Year of construction1988 Material Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure tubes5 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity27/30 Ltr (Channel A/B) Max. temperature200 Degr. C. Information Floorspace0,9x0,6 M Total height0,8 M Weight300 KGShell and tube heat exchangersAlfa LavalHeat exchangers > Shell and tube heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

General SKU170P778 LocationBarneveld MakeFiltron (Pall) TypeOmega 3 Micron Maxisette - Open channel Specified Features - Miscellaneous filter FilterTangential flow filtration membrane cassette Filter surface27 Sq Ft., Mounted on wheelsMiscellaneous filtersFiltron pallFilters > Miscellaneous filtersBrand > Filtron pall What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

bar material dia.: 32/36 mm spindle passage: 42 mm turning length: 220/100 mm turning speeds: 8000 U/min gripping station: 32/36 mm turning speeds: 8000 U/min number of tools: 38 number of milling stations: 27 control: Fanuc 31i-B5 Number of axles: 9+2x C-Achse St. chip conveyor: Knoll Number of working hours: 22981 h high-pressure pump: 340 bar total power requirement: 10 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: 3 x 1,65 x 2,44 + Irco m spindle hours: 10575 h bar loader: Breuning Irco 3,2m Stange fire distinguisher: ja/yes KRAFT & bAUER parts conveyor: ja/yes tool breakage detector: ja/yes CNC sliding headstock lathe Tornos SwissDECO 36 G, year 2018, installation december 2018, with multi-channel loading magazine Breuning-Irco Tornos SwissDECO 36G can work with guide bush 32mm (sliding headstock lathe) or without guide bush 36mm (short lathe). Machine ON/OFF: ...

Oil bottling line complete with labeller and case packer. Volumetric machine Sabry series 12 valves capper for plastic pressure cap. Complete with safety protections. Machine suitable for filling oil and other liquids in pet, glass bottles and tin cans packaging for bottles from 250 ml to 5 liters. Vibrating tank for capsules for aluminum caps. Cap descent channel with gripping head + photocell for aluminum caps. Machine equipped with a set of accessories for packaging from 1 to 5 - 0.75 - 0.50 liters. Bottle support table, conveyor belt. Mono pump 900-4500 lt / h 2cv. Machine composed of labeller and case packer.

Schneckendurchmesser/Screw Dia: 72 mm Hubvolumen/Swept Volume: 1283 ccm Spritzgewicht/Shot Weight: 1218 g Spritzdruck/Injection Pressure: 1600 bar Schliesskraft/Clamping Force: 5500 kN Holmabstand/Tie Bar Distance: 1010 x 1010 mm Aufspannplattengrosse/Platen Size: 1475 x 1485 mm Werkzeugeinbauhohe min./Mould height min.: 300 mm Werkzeugeinbauhohe max./Mould height max.: 1250 mm Offnungsweg/Opening Stroke: 940 mm Plattenabstand max/Total day-light max: 2190 mm Betriebsstunden /Working hours 29.000 h Leistung/Power: 190 kW Abmessung/Dimensions(LxWxH): 9,4 x 2,8 x 2,7 m Gewicht/Weight: 40200 kg Ausstattung/Equipment Sprache/Language: Englisch/English , Polnisch/Polish Luftventil/ Air valve: 9x Roboterschnittstelle / Robot slot: Euro 12 Kernzug/ Core pullers: 2x Heizkanal/ heating channel: 32x Trichter/ hopper: Yes Control: IPC 150, CDS-600

Newtec Celox potato sorter - Type CeloxRV12(P) - year of construction 2010 - ready for use - gentle product handling - 5 sorting outlets + overflow - 12 sorting channels - Optical sorting - Sorted by size (diameter and length) - Sorted by quality (colour, damage, stones) - Computer-controlled and monitored - Spare parts such as belts and motors are available How it works: The sorter lines up the potatoes one after the other, records each tuber using a camera and informs the sorting belt which channel the potato should be placed in. Sorter was in use until December 2023. Machine is still connected and can be inspected.

Technical data: Sheet format max 740 x740 mm Sheet format min 100x120 mm Linear speed 150m/min Maximum capacity in bars- 36,000 bars/hour Compressed air connection 6 bar Net weight 1800 kg Dimensions L.-Sz-W-H. 5500 x1000x1400mm Depending on its mechanical properties, it can process paper and cardboard in the range of weights 100-600 g/m2 Gluing system HHS hot gluing system with 4 channel controller and 4 nozzles for glue application Standard equipment of the transport module and tool clamping system: - Transport module length 2750 mm - Omron SPS controller with 8 control channels - Interface for hot glue application system (Baumer-hhs) - Color touch screen - Pressure rollers 2 pcs with pull rollers, 2 pcs with 3 rollers, 6 pcs with 6 rollers, 4 pcs with 10 rollers, 2 pcs with 1 roller Standard tools: - 1 pc through-fracture / folding plate - One left and one  ...

Overview The filling line for returnable glass bottles is currently still in use in a mineral water bottling plant in Germany. The condition of the entire line is good, as it has been regularly maintained and continuously serviced. Over time, several machines from the original line have been replaced by newer ones. Furthermore, the complete crate and bottle inspection systems have been replaced during the last years. The plant has a straight design, which makes the line very well accessible and maintainable. Tech Specs Capacity: 30,000 bph at 0.7 L bottles Suitable: Carbonated water Beer, when adding vacuum pump and HPI (high pressure injection), second vacuum channel available recently overhauled, regularly maintained Formats processed: 0.75l GDB / 0.7l GDB in crate of 4x3 YOM: ranging from 1995 to 2020 The Line in Detail Pallet tape removal Manufacturer: BORNBINDER Model: PAE YOM: 2014 ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h) Machine weight baler ap ...