channel baler used for sale

Suction conveyors with 3 kW side channel compressor various capacities available

SUPERCRITICAL CO2 EXTRACTOR Model: EXTRAKTLAB 140 Refurbished in 2021 (to brand new equivalent condition) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2,5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance - UL 508A electrical panel Electrical - 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions - 99" ...

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 500 mm Table load max.: 100 kg Number of T-channels: 6 T-channel width: 14H7 mm Dimensions: Length: 900 mm Width: 800 mm Height: 150 mm

Suction conveyors with side channel compressor and time control various capacities available

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

Baler Presto HPK 50 HS (HPK 750 H), year of manufacture 2013 Manafacture: Presto Type: HPK 50 HS (HPK 750 H) Year of construction: 2013 Hours: 3788 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Universal Clamping surface: Diameter: 250 mm Table height: 100 mm Number of T-channels: 6 T-channel width: 12H7 mm Machine´s weight about: 44 kg Dimensions: Length: 420 mm Width: 340 mm Height: 100 mm

TECHNICAL SPECIFICATIONS (impact crusher) Manafacture: SBM Designation: Impact crusher Version: Semi-mobile Type: RHS 12/12/4 Year of construction: 1998 Drive cable: 160 kW Drive type: V-belt Throughput: 130 t/h Inlet opening (width/depth): 1,264 / 1,047 mm Maximum feed size: 800 mm Number of blow bars: 4 pcs. Rotor diameter: 1,280 mm Rotor speed: 33.3 m/s Weight impact crusher: approx. 15,500 kg SPECIFIC COMMENT - Selective crushing of soft to medium-hard natural stone, reinforced concrete and rubble - Without grinding track - Can also be used as a secondary crusher OVERALL SYSTEM CONSISTING OF: - SBM impact crusher RHS 12/12/4 - Feed hopper with vibrating chute - Bar sieve for pre-screening - Outlet channel - Discharge conveyor - Overbelt magnet - Stockpile conveyor - SIMENS Simatic OP7 controller -Structural steelwork - Generator set - Optionally a ...

For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Technical data Table length: 800 mm Table width: 300 mm Number of T-channels: 1 T-channel width: 14 mm Axial motion: Longitudinal travel (X-axis): 710 mm cross travel (Z-axis): 300 mm vertical travel (Y-axis): 400 mm Max. distance from table to spindle centreline: 360 mm Table load max.: 250 kg Grinding wheel: Diameter: 355 mm Width: 31 mm Bore: 127 mm Grinding wheel speeds fix: 1710 rpm Table speeds: stepless from: 3 m/min up to: 25 m/min Automatic cross feed: stepless from: 25 mm/min up to: 500 mm/min Grinding spindle motor: 3.7 kW Machine´s weight about: 2600 kg Overall dimensions machine: Length: 2300 mm Width: 2000 mm Height: 2600 mm Various accessories: Touch screen Coolant system Paper filter facility Electrical magnetic chuck Length: 600 mm Width: 300  ...

Baling press cardboard foil MF100 | 6 t pressing force The MF100 balers are ideal for pressing cardboard, paper, film, clothing and other materials. Volume reduction through compaction of up to 90%. The press is user-friendly with a large filling volume. The automatic bale ejector helps to remove the bales from the baler without any problems. Characteristics: Bale weight of up to 100kg Ideal for use with medium material volumes Fully automatic bale ejection Powerful cylinder for uniform material compaction Hold-down device to reduce material springback CE certified Made in Europe Specifications: Pressing force: 6 t Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2371 x 1388 x 1046 mm Transport height: 1876 mm Machine weight: 632 kg Cycle time: 28 seconds Noise level: 65 decibels Bale: Ba ...

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

Format range: 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS, 4 channels with 2 application heads, disc gluing unit on the left, Bobst CUBE control, vibrator, pre-crusher right and left, Kicker, counters, digital position indicators, additional means transport up / down in the folding station, folding floor module, pneumatic, clocked press belt. Overhaul 2021: cleaned, tested, painted, new feeder and transport belts.

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL  ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Technical data Number of axis simultaneous: 3 Number of tables: 1 Number of spindles: 1 Table length: 800 mm Table width: 600 mm Distance of the T-slots: 63 mm T-channel width: 14H7 mm Table load max.: 500 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 60 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 130 mm Tool lenght: 300 mm Max. tool-weight: 6.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 0 rpm up to: 20000 rpm Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Machine´s ...

Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor

automatic baler Manafacture: UNOTECH Type: UPAMAT 100 V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Duct format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Output: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large-digit display  ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426/430 Operating hours: 43291 Technical data Number of axis total: 3 Table length: 850 mm Table width: 530 mm Number of T-channels: 6 Distance of the T-slots: 63 mm T-channel width: 14H12 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer: Number of tools: 36 Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 40 kW Time under power: 62694 Hour Operating time: 43291 Hour Working time: 53367 Hour Spindle run time: 1304 Hour Noise level: 75 dB (A) Machine´s weight about: 6500 kg Overall dimensions machine: Length: 2500 mm Width: 1600 mm ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...

used baler Manufacturer: PAAL Type: PACOMAT II-50 D Year of construction: 2020 Operating hours: approx. 12,000 specifications: Press force: 50 t Specific pressing force: 69 N/cm² Bale weights: up to approx. 450 kg depending on type and bale length Drive power: 45 kW Throughput: approx. 243 m/h Total connected load: 56 kW Duct format: 1,000 x 700 mm (H x W) Filling opening: 1,050 x 620 mm Lacing of the bales: 4 x horizontal Wire pass-through in the pressing direction seen on the right side Oil volume: approx. 750 liters including: Wire unwinding devices for approx. 40 kg wire rings Light barrier control Automatic-hydraulic infeed of the press channel The machine will be available at the end of March / beginning of April 2024.

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 4220 Technical data Pressure: 6.3 to Total stroke: 400 mm Mounting height max.: 500 mm Execution: 1 support Table surface: Length: 500 mm Width: 300 mm T-channel width: 14 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2200 mm Various accessories: Déclanchement à deux mains

Vertical baler Dixi 60 SH, built in 2009 Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SH Drive power: 7.5 kW Press force: 60 t Cycle time: 36 s Pressing time: 16 s Filling opening: 1160 x 550 mm Filling height: 1180 mm Bale size: 1200 x 800 x 1100 mm Bale weight: 340-500 kg Setting: manual Dimensions: 1890 x 1400 x 2170 mm Weight: 2430 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series O-M Technical data 1 column execution Table: Table length: 600 mm Table width: 380 mm T-channel width: 10 mm Number of spline: 6 Distance of the T-slots: 50 mm Table load max.: 200 kg Carriage: Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Travel of the vertical slide: 450 mm Passage from grinding motor to table: 485 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 340 mm Max. angle with taper grinding: up to: 16 ° Vertical travel of grinding spindle: stepless from: 1 mm up to: 110 mm Travel speeds: stepless from: 0.5 m/min up to: 12 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Feeds: X axis: 0 - 12 m/min Y axis: 0 - 12 m/min W axis: 900 mm/min Voltage 50 ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 425 Technical data Number of axis total: 3 Table length: 900 mm Table width: 530 mm Number of T-channels: 8 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 450 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 22 with double gripper Spindle nose SK: 40 DIN 69871 Pull-Studs: DIN 69872 B Tool diameter: 80 mm Diameter with free adjacent pockets: 130 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5-15 sec Feeds: stepless longitudinal from: 2 mm/min up to: 10000 mm/min transversal from: 2 mm/min up to: 10000 mm/min verti ...

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 280 mm Number of T-channels: 4 T-channel width: 12H7 mm Weight: 40 kg Dimensions: Length: 500 mm Width: 350 mm Height: 100 mm Various accessories: Dividing plate

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 2 columns execution Table: Table length: 1020 mm Table width: 860 mm T-channel width: 14 mm Number of spline: 7 Distance of the T-slots: 100 mm Table load max.: 800 kg Longitudinal travel (X-axis): 900 mm Transversal travel (y-axis): 600 mm Verticla travel (W-axis): 635 mm Feeds: X axis: 5 - 2500 mm/min Y axis: 5 - 2500 mm/min W axis: 800 mm/min Passage from grinding motor to table: 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 950 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Vertical travel of grinding spindle: up to: 180 mm Travel speeds: stepless from: 0.015 m/min up to: 7.5 m/min Stroke length Z, infinitely adjustable: 125 mm Radiale fine feed U-axis up to: 6 mm Planetary moti ...

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Cross table Clamping surface: Length: 340 mm Width: 200 mm Number of T-channels: 3 T-channel width: 10 mm Weight: 80 kg Dimensions: Length: 500 mm Width: 450 mm Height: 130 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Clamping surface: Diameter: 170 mm Number of T-channels: 4 T-channel width: 12 mm Machine´s weight about: 60 kg Dimensions: Length: 460 mm Width: 230 mm Height: 160 mm Various accessories: Tailstock Centre height: 140 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 210 mm Number of T-channels: 4 T-channel width: 12 mm Distance of the T-slots: 40 mm Longitudinal travel (X-axis): 260 mm Transversal travel (y axis): 150 mm Vertical travel (z axis): 310 mm Travel of the upper slide Distance from vertical spindle to table: 310 mm Distance from horizontal spindle to table: 410 mm Spindle speeds: stepless from: 58 rpm up to: 2000 rpm Taper in spindle: 30 ISO Feeds steps:: 10 Feeds stepless: longitudinal from: 12.0 mm/min up to: 400 mm/min vertical from: 12.0 mm/min up to: 400 mm/min Rapid traverse: longitudinal: 1.2 m/min vertical: 1.2 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 3.0 HP Total power required Machine´s weight about: 700 kg Overall dimensions  ...

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen diameter: 300 mm Microscope stage length: 520 mm Microscope stage width: 280 mm T-channel width: 6H7 mm Longitudinal way: 250 mm Transversal way: 125 mm Table load max.: 20 kg Glass table: Length: 330 mm Width: 200 mm Amplifications: 10 Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 100 kg Overall dimensions machine: Length: 1400 mm Width: 600 mm Height: 1300 mm Various accessories: Obscuration device

Used machine for production of shortbread cookies with filling model MAX DROP CNC DUO Manufacturer HASBORG Rakszawa Poland Year of production 2009 CE mark Installed power: 2 kW power supply: 3 x 400V two-head - head 1 = two rollers, shortcrust / gingerbread / sponge-fatty pastry - head 2 = two rollers, mobile station attached optionally, fruit fillings, cream fillings, sprinkles 9 nozzles for exchange of dozens of tips squeeze cakes (plus with lowering) curly extruded cookies (plus with lowering) curly cookies curly cookies with lowering, filled cookies long cookies continuous pouring optional: string cut cookies With this compact machine, a very wide range of different pastries can be produced, including filled pastries in the center. The MAX DROP CNC DUO is equipped with two tanks for dough (e.g., two colors) or dough and filling. It includes a bar with  ...

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 380 mm Number of T-channels: 7 T-channel width: 10H7 mm Weight: 80 kg Dimensions: Length: 550 mm Width: 400 mm Height: 150 mm Various accessories: Dividing plate

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Number of axis total: 3 Table length: 600 mm Table width: 260 mm Number of T-channels: 5 T-channel width: 12H7 mm Distance of the T-slots: 40 mm Longitudinal travel (X-axis): 260 mm Transversal travel (y axis): 150 mm Vertical travel (z axis): 310 mm Travel of the upper slide Distance from vertical spindle to table: 310 mm Distance from horizontal spindle to table: 410 mm Spindle speeds: stepless from: 58 rpm up to: 2000 rpm Taper in spindle: 30 ISO Head inclining + -: 90 ° Feeds steps:: 10 Feeds stepless: longitudinal from: 12 mm/min up to: 400 mm/min vertical from: 12 mm/min up to: 400 mm/min Rapid traverse: longitudinal: 1.2 m/min vertical: 1.2 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2 HP Total power required: 3 HP Machine´s weight about: 700 ...

Format Range: max. 1650 mm min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS X-tend 8 channel with 4 nozzles, Disc gluing unit link with re-pumping device, electronic Overtaking fold with servos, feeder with vacuum, primary crusher left, Kickers, counters, digital position indicators, pressing device after folding, motorized threading station, Jagenberg DBS 01 control, Fully automatic format setting Jagset II, corrugated cardboard package , 3 x alignment with the press belt, pneumatic, clocked press belt. Press belt extension, video surveillance tray, cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running, by arrangement.

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 310 mm Number of T-channels: 8 T-channel width: 14H7 mm Machine´s weight about: 50 kg Dimensions: Length: 500 mm Width: 450 mm

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Radio system, antenna contact module -Type: IRIS RS485-EXT-02 -Channel 1: 433.30 MHz -Number: 3x 2-sets available -Price: per piece -Weight: 0.1 kg

Press mould Console 2 Cold channel form Output: 1 product Dimensions: 260x420x270mm (390x490x270mm with a pusher, mount and legs) Weight: about 200 kg Condition: perfect

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 310 mm Number of T-channels: 8 T-channel width: 14H7 mm Machine´s weight about: 50 kg Dimensions: Length: 500 mm Width: 450 mm

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Cross table Execution: Horizontal Clamping surface: Length: 270 mm Width: 175 mm Travels: longitudinal: 120 mm Crosswise: 120 mm Table height: 125 mm Number of T-channels: 4 T-channel width: 14H7 mm Dimensions: Length: 350 mm Width: 250 mm Height: 200 mm

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...

GeneralTurn- mill machining centre; Control: Siemens sl Operate3G without ShopTurn appr 2 channel Tool magazineNumber of tools38 Max. tool length250 mmMax. tool diameter70 mmMax. tool weight3 KgB-axis Turning-milling spindleSwivelling range+/- 120 degreeSpeed range B3100 rpmAngular value, min.1 degreeTurning-milling spindleSpindle taperCapto C5 Drive power (100% DC)5,5 kWSpindle speed-20000 rpmDrive power (40% DC)7,5 kWTorque (100% DC)22 NmTorque (40% DC)30 Nmangular value, min.5 degreelocking moment700 NmB-axis counter spindlePositioning angle B3-axis, in 5 degree steps0 - 225 degreeSpeed range B340 rpmSlide 3Longitudinal stroke665 mmRapid traverse Z36 m/minSlide 1Longitudinal stroke454 mmTransverse stroke380 mmRapid traverse in X40 m/minY axis, vertical+/- 105 mmRapid traverse in Z50 m/minRapid traverse in Y40 m/minHeadstock, rightClamping chuck Ø140 mmSpindle bore38 mmSpindle diametr ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...