channel baler used for sale

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.

Bagging filter PAFO 3/3-20/1518 with vibratory motor with Duct bend Channel Non-return valve Duct fitting without fan Year of manufacture 2004 L x W x H: 200 x 70 x 300 cm Weight 350 kg The bagging filter is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

Products For square, rectangular or round biscuits and baked goods suitable for roll separation Feed/System integration • For feeding pillow-pack and wrapping Machines • Presentation direct to portioner always with vibratory channels • Manual or automatic portioner infeed • Own drive Technical features • 4 to 12 channels

10,000 bottles PET/h 2 channel rinsers

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

Pneumatic conveying installation for different kinds of powders, consisting of: Feeding hopper with cover and turbine vibrator (Netter NCT 10), injector (Telschig 2'' FOX 300-SCE-SS) and side channel blower (Elektror Sd 820, 7,5 kW, 9,0 m³/h, 420 mbar) with pressure limiting valve. Conveying capacity: 375 kg/h, required air flow: Ca. 180 Nm³/h at 330 mbar.

Baler, press for cardboard, film paper V5 | 5t Bale size: 700 mm H (variable) × 750 mm W × 500 mm D Bale weight: 50–100 kg Pressing time: 28 seconds Pressing force: up to 5 tons Dimensions: 2015 mm H × 870 mm W × 655 mm D Filling opening: 750 mm W × 385 mm H Integrated bale ejection mechanism Weight: 340 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification V5 SMALL BALER Versatile, efficient and simple operation: The V5 baler is ideal for small and medium-sized companies. Even with a small amount of material, it creates order, cleanliness and space. The setting of the pressing cycle on the V5 can be done either automatically or manually. With the help of the "Easy Tie" system, the finished bale can be tied quickly and conveniently when the door is ope ...

Koettermann Laboratory extract2-402-HD DIN 12924 Media supply: 1x water, 1x gas, 4x Current 230 V, 1x Current 400 V Lighting walkable Exhaust control funnel control indicator Phoenix Controls Trigger monitoring display Optional: Phoenix Controls and channel insert for the deduction monitoring 500,-EUR mass:

Pallet entry shelf or Radio Shuttle shelf, up to 500kg / pallet, max. 1,890 pallet spaces, with storage space below the drive-in shelf, sale without shuttles - used -: Price from location: 49.500.-â?¬ (net) plus disassembly etc. Manufacturer Shelf: EAB A radio shuttle from Toyota or BT was used Built: 2008 Payload per pallet: max. 500kg Number of shelf planes: 3 drive-in planes Current pallet height: max. 1.70m Shelf depth: approx. 12.40m 45 channels a 14 pallets in a row Shelf height: must be submitted afterwards - should be about 9m Depth per channel: 14 pallets in a row Total width: approx. 65m The retractable shelf stands on a steel construction substructure! Basically, the retractable shelf could also be built without this construction! Condition: good (regularly maintained) Available: by arrangement Location: Prague Area

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

- Engine power 7.5kW / 32 amperes - Control PLC supported, with two-hand safety circuit - Cutting force 30to Cutting channel designed for: - max. roll length 1500mm - max. roll diameter 1200mm - Machine weight approx. 3000kg - Hand guard grille in the area of the control panel and opposite - Forklift riding shoes are used for easy and safe transport of the Machine by forklift - Spaltertisch straight version Colour blue Machine immediately available

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request

Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Operating hours: 23546 Technical data Number of axis total: 5 Table length: 920 mm Table width: 380 mm Number of T-channels: 7 Distance of the T-slots: 50 mm T-channel width: 12H8 mm Table load max.: 250 kg Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 350 mm Vertical travel (z axis): 610 mm Tool magazine number of tools: 24 Tool diameter max.: 63 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 175 mm Max. tool-weight: 1.5 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: HSK: E40 / DIN 69893 Distance spindle nose to table: 97 - 704 mm Spindle speeds: stepless from: 30 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Voltag ...

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 426 / 430 Operating hours: 24453 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 1050 mm Table width: 590 mm Number of T-channels: 8 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Table load max.: 400 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer:: TC 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 110 mm Tool lenght: 250 mm Max. tool-weight: 6 kg Time of tool changing: 5 sec Average chip-to-chip time: 7 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle speeds: stepless from: 100 rpm up to: 20000 rpm Feed range: 1500 mm/min Rapid traverse:: 22 m/min Air connect: 6 - 7 bar Voltage 50 Hz  ...

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 0 Technical data Table length: 700 mm Table width: 500 mm Number of T-channels: 5 Distance of the T-slots: 100 mm T-channel width: 18H7 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 540 mm Tool changer: Number of tools: 24 Tool diameter max.: 77 mm Diameter with free adjacent pockets: 115 mm Tool lenght: 305 mm Max. tool-weight: 6 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: ISO: B40 Vertical spindle speeds: stepless from: 100 rpm up to: 10000 rpm Rapid traverse: long.: 24 m/min Rapid traverse: transversal: 24 m/min Rapid traverse: vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 12  ...

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN MillPlus /3R-WorkMaster +3R-WorkShopManager Operating hours: 30452 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Circulary table diameter: 630 mm Number of T-channels: 9 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 50H6 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 1000 mm Diameter: 920 mm Table load max.: 500 kg Table divisions (B): 360 ° A axis Swivel angle (a-axis): +45/-30 ° Holding torque A-axis: 3866 Nm Clamping torque C-axis: 6008 Nm Torque max.: 2650 Nm Tool changer: Number of tools: 180 Tool diameter: 80 mm Diameter with free adja ...

-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 151 Technical data Number of axis total: 3 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 25 rpm up to: 8000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 10H8 mm Number of T-channels: 4 Height of table above floor: 1160 mm Min. distance from table to spindle: 0-110-560 mm Max. distance from table to spindle: 560 mm Longitudinal travel: 420 mm Transversal travel: 230 mm Vertical travel: 450 mm Feeds: 1 - 8000 mm/min Rapid traverse:: 8 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Power: 5.8 kW Total power required: 15 kVA Machi ...

Stock - No. 1919 1 complete set of extrusion tools/dies for the production of electric cable protection ducts/channels condition as new incl. punching unit used material: rigid-PVC blend

CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-1, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm:105 Spray weight gr: 4137 Spray volume cc: 4546 spray pressure possible: 1778 Dimensions and weights Machine weight Kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-2, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm: 115 spray weight gr: 4962 Spray volume cc: 5453 spray pressure to be: 1482 Dimensions and weights Dimensions LxBxH m: 12.16 x 3.49 x 2.58 Machine Weight kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64

used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, -  ...

- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 4 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 50 rpm up to: 9000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 12H8 mm Height of table above floor: 1080 mm Min. distance from table to spindle: 0-110-560 mm Longitudinal travel: 420 mm Transversal travel: 240 mm Vertical travel: 450 mm Feeds: 1-7200 mm/min Rapid traverse:: 7.2 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Spindle power: 5 kW Total power required: 10 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: ...

Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 3 Table length: 1200 mm Table width: 600 mm Number of T-channels: 9 T-channel width: 14H7 mm Table load max.: 700 kg Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 630 mm Vertical travel (z axis): 500 mm Distance from vertical spindle to table: 65 - 565 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 40 Spindle nose: ISO: 40 Feeds (X, Y, Z): 2 - 4000 mm/min Feeds: Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 8 m/min Stroke of horizontal spindle: 100 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 15 kW Machine´s weight about: 7000 kg Overall dimensions machine: Length: 3500 mm Width: 2400 mm Height: 2400 mm Various accessories: Rigide table Electronic hand held control Hydraulic work-piece clamping Full ...

McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.

Technical data Table length: 760 mm Table width: 400 mm Clamping surface: Length: 600 mm Width: 320 mm T-channel width: 12H8 mm Height of table above floor: 810 mm Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Drill depth (spindle stroke): 120 mm Max. distance from table to spindle nose: 110 - 570 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Vertical travel (z axis): 460 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Vertical feeds: from: 0 mm/min up to: 800 mm/min Quill feed speed: number (steps): 6 from: 0.04 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2050 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Threading device Lamp Quick change device Set of clamping tools Digital readout number of axis:: 2 Manufacturer: ACU RITE Spindle brake Turret s ...

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

Manufacturer: Knauer Year of construction: 2017 Tilting device: Hywema KV 12 Location: Kaiserslautern External dimensions: approx. 2668 x 2140 x 4752 mm Width feeder: 2.25 m Width: Output: 1.95 m Nominal voltage tilting device: 400 V Rated power tilting device: 2.2 kW Motor/pumping hydraulic system: 5.8 l/min; 160 bar; 1.5 kW; 1445 rpm Payload travel trolley: 4000 kg Payload tilting device: 1250 kg Payload vibrating channel: 250 kg/m² Weight of carriage: 2550 kg Weight tilting device: 1450 kg Weight vibrating channel: 1650 kg Mounting: Attachment to the hall floor The conveyor system served as a feed to a continuous washing system in an automotive plant. We will be happy to send you further information and pictures on request!

McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

• Palletizer BERCHI mod. GENIUS PTF: • Year: 2001 – completely regenerated 2016 • Producer: BERCHI • Speed (BPH): 50/55 packs per minute • Suitable for palletising crates, bundles, and cartons • No. 3 cadenzers • No. 1 divider • Roll Forming Roller • Double channel roller • Lung roller • Pallet magazine • Automatic filling machine with flap storage • New electrical system with management via PLC and touch screen • Code R 10

Bench drill make ROMANIA type G 13Fabr. -No: E647, built in 1973Technical specifications:Drilling capacity: 13 mm8 spindle speeds: 425 - 4500 RPM.Throat: 200 mmTable size processing area: 250 x 300 mmTable size with channel: 340 x 370 mmColumn diameter: 80 mmelectr. Connection: 1.35 kWExternal dimensions of the drill L x W x H: 800 x 370 x 950 mmColor greenWith- underframe- V-belt driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools