chamber filter press used for sale

Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Press brake manufactured in 2019. This Vimercati PHSY 30X1250 features a pressing force of 30 tons and a bending length of 1,250 mm. It includes an X-axis travel of 400 mm and an R-axis travel of 130 mm. If you are looking to get high-quality bending capabilities, consider the Vimercati PHSY 30X1250 machine we have for sale. Contact us for further details.

Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!

Balemaster Year: 2006 Type: CMG 268 Waste compactor

CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.

Baler HSM, type HL 7009 ST/A, year of construction 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of Make: 2021 Hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Note: The press is in good condition and has been inspected and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance paymen ...

Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!

200 ton x 4000mm with Rolleri Pneumatic clamps

Weingarten Eccentric Press AV10 - With pliers feed - Reel and reel - When pressing, the speed can be set up with a frequency converter - Press force: 10 t - Stroke rate: 160 / min - Plunger stroke: 6-60 mm - Plunger adjustment: 40 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

BENELLI PEZM/800/600/4P 800T mechanical press was built in 1971 in Italy. The machine is designed for the precision cold working of metals. It enables the performance of demanding operations such as blanking, stamping and the forming of large-size components. Its high press force of 800 tonnes in combination with a wide range of machining capabilities makes it an excellent choice for industrial plants specialising in the mass production of parts for the automotive and machinery industries. The BENELLI PEZM/800/600/4P features a drive system based on a flywheel and an eccentric gearbox, which converts the rotational movement of the shaft into the reciprocating movement of the slider. This solution ensures smooth and repeatable operation throughout successive production cycles. Tools are positioned on the work table with centring pins and then fixed to the table and the slider with bolt ...

MOSSINI PDM/4B 1000T mechanical press was built in 2009 in Italy by Mossini SpA. The machine is designed for the precision blanking, stamping and forming of large-size components. The combination of high press force and wide machining capabilities makes the press ideal for the mass production of components used, among others, in the automotive and machinery industries. The MOSSINI PDM/4B 1000 is distinguished by its high press force of 1000 tonnes. Its drive system is based on a flywheel and an eccentric gearbox, which cooperate with four connecting rods. This solution enables uniform torque transmission and smooth control of the slider movement. Tools are positioned on the work table with centring pins and fixed with clamps, whilst they are fixed to the slider with bolts. The work table can be moved outside the press’s work area to carry out the assembly or disassembly of tooling,  ...

Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm

100 ton x 3000mm with ANTIL Robot

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm

Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible.

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t

Tot.kW 43 Volt 400V /50Hz

Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg

Papildoma informacija — Naujas preskonteineris Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Almost unused stationary (~ 1 month) screw compactor designed for filling compaction containers and/or other containers. The machine is built from a robust welded steel structure with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length 2,480 mm Overall width 1,660 mm Overall weight 2,300 kg Loading height 1,350 mm Feed opening 1,375 × 1,490 mm Screw diameter 750 / 500 mm Screw speed 17 rpm Drive power 11 kW Residual-current device / FL plug Type B / 300 mA 2. Hydraulic Container Coupling / Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse move ...

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2016 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2017 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2016 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2017 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2018 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2019 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2020 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2021 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2022 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2023 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

SPIERTZ F2E32-22 320T mechanical press was built in 1982 in Germany. The machine is designed for series and mass production of parts used in the automotive and machinery industries. It enables the cold forming of metals, such as blanking, stamping, and forming of large-sized parts. All these operations are performed with a press force of 320 tons. The drive system of the SPIERTZ F2E32-22 press is based on a flywheel and an eccentric gear that converts the rotational motion of the shaft into the reciprocating motion of the slider. This solution ensures smooth machine operation and high machining repeatability. Tools are positioned on the work table with centring pins and then fixed to the table and the slider with bolts. The SPIERTZ F2E32 320T press also stands out for its rigid design, which ensures reliable operation in demanding production conditions. Technical Specifications of the ...

Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...

Key data: 200 mm

used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump

It is a recontitioned Fortuna fully automatic bun roll press size 3 for sale. The machine head can be swivelled, switched off with active movement. The machine is in very good condition, fully functional and runs very smoothly. It has been repainted. The machine head of the machine is in very good condition, a new stainless steel cutting knife has been installed, no wear is visible. A new control box with new contactors has been installed. The machine has a reverse run button and an intervention protection. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Connection 400 V, 1.6 kW, 16A-CEE plug, dimensions: 690 x 800 x 1470 cm (WxDxH). Incl. 3 x knitted plates (other knitted plates on request). A video can be sent on request. Price on request.

Key data: 10 t, 300 mm, 300 mm

more info on request

Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details.

For sale is a high-quality and fully equipped laboratory / compact pellet press from the renowned manufacturer Amandus Kahl (Type 14-175) including precise K-Tron dosing screw, Rittal control cabinet and extensive accessories/spare parts. The system is ideal for test setups, laboratory applications or smaller productions in the pharmaceutical, chemical or food industries as well as for special applications, as the parts in contact with the product are made of high-quality stainless steel. Technical data & equipment: Pellet mill Amandus Kahl: - Manufacturer: Amandus Kahl (Hamburg, Germany) - Type: Press 14-175 - Machine No.: 22374 - Year of construction: 2006 - Certification: CE - Drive motor: 3.0 kW (220–240 / 380–415 volts) - Speed: Infinitely variable up to 101 rpm - Die: Diameter 150 mm - Press rollers: 2 pieces K-Tron dosing screw (produ ...

Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.