chain used for sale

Roundness tester make MITUTOYO type Roundtest RA 122Code no. 211-941D, serial no. 920069 built in 1992consisting of:MEASURING UNIT RA 1001 control and evaluation unit RE 12 buttons No. 211-046Technical specifications:Turntable: air-bearingMeasuring range / workpiece diameter: 280 mmMeasuring range / workpiece height outside: 220 mmMeasuring range / workpiece height inside: 110 mmRoundness of the turntable: 0.08 + 6 H / 10000 µmSpeed: 6 rpm.Table diameter: 110 mmCentering range: +/- 2 °Leveling range: +/- 1 °Weight: 32 kgDimensions L x W x H: 252 x 404 x 545 mmBUTTONMeasuring range: +/- 0.25 mmStylus radius: 1 mmMeasuring force: 70-100 mNCONTROL AND EVALUATION UNITFilter: 15, 50, 150, 500 oscillations / revMeasuring range max .: +/- 250 µmMagnification: 100 x - 20000 xautomatic compensation: eccentricity, coaxialityParameters: roundness, center offset: Top height, valley depths, evenn ...

material width: 3000 mm material thickness: 0 mm no. of straightening rolls: 0 total power requirement: 22 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 7,5 x 2,5 x 2,9 m D U N K E S Hydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25 Year 1990 ( H 89-1960 ) ____________________________________________________________ Consisting of: Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm, Distance to column 620 mm, sensitive Straightening stroke via handlever with turret-stop, Measuring device for accurate straitening via a lightbar Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd 57/1 ...

Machining center Victor Taichung VC-205 Fanuc (A3738) Make: Victor Taichung Model: VC-205 CNC: Fanuc YEAR 2016 X-AXIS TRAVEL 2050 mm Y-AXIS TRAVEL 550 mm Z-AXIS TRAVEL 560 mm DISTANCE SPINDLE NOSE-TABLE 180-740 mm DISTANCE COLUMN-SPINDLE AXIS 638 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 12000 rpm; 15-18,5 kW; BT-40 TABLE SIZE 2500 x 550 mm MAX ADMITTED LOAD 1200 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE CHAIN-TYPE ; 40 POS MAX TOOL DIAMETER 80 mm MAX TOOL LENGHT 350 mm MAX TOOL WEIGHT 8 Kg CONTROL UNIT FANUC 0i-MF WEIGHT 9050 Kg OVERALL DIMENSIONS 5300 x 3430 x 3045 mm ACCESSORIES SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE PENDULUM MACHINING WITH CENTRAL SPLASH GUARD AND SIDE WINDOW; POWER-ON HOURS 7900.

Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...

Machining center FAGIMA FA 1250 BIG Make: FAGIMA Model: FA 1250 BIG YEAR 2010 X-AXIS TRAVEL 1250 mm Y-AXIS TRAVEL 700 mm Z-AXIS TRAVEL 620 mm DISTANCE SPINDLE NOSE-TABLE 100 mm RAPID FEEDS X-Y-Z 40 – 36 – 28 m/min SPINDLE 10000 rpm; 22-35 kW; ISO 40 – DIN TABLE SIZE 600 x 1500 mm MAX ADMITTED LOAD 1400 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS MAX TOOL DIAMETER 80 (125) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 8 Kg CONTROL UNIT HEIDENHAIN iTNC 530 WEIGHT 8500 Kg OVERALL DIMENSIONS 2370 x 3350 x 3180 mm ACCESSORIES SWARF CONVEYOR ; PORTABLE HANDWHEEL

Vertical machining center Victor Taichung F 106 Make: Victor Taichung Model: F106 YEAR 2021 X-AXIS TRAVEL 1060 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 560 mm DISTANCE SPINDLE NOSE-TABLE 150-710 mm DISTANCE COLUMN-SPINDLE AXIS 627 mm RAPID FEEDS X-Y-Z 32 m/min SPINDLE 10000 rpm; 11-15 kW; BT 40 TABLE SIZE 1120 x 520 mm MAX ADMITTED LOAD 600 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE CHAIN-TYPE ; 24 POS MAX TOOL DIAMETER 75 (150) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 7 Kg CONTROL UNIT FANUC 0i MATE WEIGHT 6850 Kg OVERALL DIMENSIONS 3365 x 2815 x 2840 mm

Vertical machining center Victor Taichung P136 Fanuc Make: Victor Taichung Model: P136 CNC: Fanuc X-AXIS TRAVEL 1360 mm Y-AXIS TRAVEL 700 mm Z-AXIS TRAVEL 700 mm DISTANCE SPINDLE NOSE-TABLE 100-800 mm DISTANCE COLUMN-SPINDLE AXIS 792 mm RAPID FEEDS X-Y-Z 32 – 32 – 32 m/min SPINDLE 15000 rpm; 11-15 kW; BBT-40 TABLE SIZE 1400 x 700 mm MAX ADMITTED LOAD 1000 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 75 (150) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 7 Kg CONTROL UNIT FANUC 0i-MF WEIGHT 9500 Kg OVERALL DIMENSIONS 4670 x 2985 x 3105 mm ACCESSORIES SWARF CONVEYOR ; PORTABLE HANDWHEEL

Victor Taichung G135 Fanuc vertical machining center Make: Victor Taichung Model: G135 CNC: Fanuc X-AXIS TRAVEL 1350 mm Y-AXIS TRAVEL 700 mm Z-AXIS TRAVEL 700 mm DISTANCE SPINDLE NOSE-TABLE 100-800 mm RAPID FEEDS X-Y-Z 20 – 20 – 18 m/min SPINDLE 6000 rpm; 15-18,5 kW; BT-50 TABLE SIZE 1400 x 700 mm MAX ADMITTED LOAD 2200 Kg TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 127 (250) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 15 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 10 s CONTROL UNIT FANUC 0i-MF WEIGHT 11500 Kg OVERALL DIMENSIONS 4295 x 2965 x 3075 mm

Vertical machining center ARES SEIKI S6040 with roto pallet Make: ARES SEIKI Model: S6040 YEAR 2019 X-AXIS TRAVEL 600 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 500 mm DISTANCE SPINDLE NOSE-TABLE 180-680 mm RAPID FEEDS X-Y-Z 36 – 36 – 48 m/min SPINDLE 12000 rpm; 5,5-7,5 kW; ISO 40 – DIN PALLET N.2 ; 700X400 mm MAX ADMITTED LOAD 250 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT MITSUBISHI M80 WEIGHT 6600 Kg OVERALL DIMENSIONS 3660 x 2585 x 2780 mm ACCESSORIES HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; PORTABLE HANDWHEEL ; ETHERNET PORT ; RS 232 SERIAL PORT NOTE MACCHINA COMPLETA DI N.13 CONI PORTAPINZA; N.1 CONO PORTAFRESA; N.1 TASTATORE 3d.

KOMATECH KM450D 3-axis vertical machining center Make: Komatech Model: KM450D X-AXIS TRAVEL 700 mm Y-AXIS TRAVEL 450 mm Z-AXIS TRAVEL 480 mm DISTANCE SPINDLE NOSE-TABLE 170-550 mm RAPID FEEDS X-Y-Z 36 m/min SPINDLE 12000 rpm; 11-18,5 kW; BT-40 TABLE SIZE 1140 x 700 mm MAX ADMITTED LOAD 250×2 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 130 mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 7 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 3.4 s CONTROL UNIT FANUC 0i-MF WEIGHT 5500 Kg OVERALL DIMENSIONS 3435 x 2400 x 2475 mm

HAMUEL HSTM 1500 Used 5-axis vertical machining center Make: HAMUEL Model: HSTM 1500 YEAR 2009 X-AXIS TRAVEL 1930 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 570 mm RAPID FEEDS X-Y-Z 40 – 40 – 40 m/min SPINDLE 16000 rpm; 54 kW; 136 Nm; HSK 63 B-AXIS ±95 ° MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT SIEMENS 840 D WORKING HOURS 9800 WEIGHT 25000 Kg OVERALL DIMENSIONS 6400 x 2800 x 3000 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; USB PORT ; RENISHAW TOUCH PROBE NOTE MAX PIECE DIMENSIONS: 1750X360 mm; MAX ADMITTED LOAD: 200 Kg; A/C AXIS CONTINUOUS POSITIONER; POSITIONERS: 180 rpm

Used 5-axis bridge-type machining center ROEDERS PXP601DSH (A3750) Condition: USED YEAR 2014 X-AXIS TRAVEL 540 mm Y-AXIS TRAVEL 635 mm Z-AXIS TRAVEL 400 mm DISTANCE SPINDLE NOSE-TABLE 50-555 mm RAPID FEEDS X-Y-Z 60 m/min SPINDLE 42000 rpm; 14 kW; HSK E40 A-AXIS ± 115 ° TABLE SIZE 340 x 340 mm MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 96 POS MAX TOOL DIAMETER 16 mm CONTROL UNIT ROEDERS RMS6X.xx4 WEIGHT 10000 Kg OVERALL DIMENSIONS 2885 x 2760 x 3050 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; SPINDLE COOLING SYSTEM ; EXHAUST SYSTEM NOTE AXES WITH LINEAR MOTOR

Machining center bridge-type 5-axis FAMU Active Five 2000 Make: FAMU Model: Active Five 2000 YEAR 2008 X-AXIS TRAVEL 2000 mm Y-AXIS TRAVEL 1800 mm Z-AXIS TRAVEL 850 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 0 – 22000 rpm; 30 kW; HSK A63 TABLE SIZE 2100 x 1000 mm MAX ADMITTED LOAD 3000 Kg HIGH PRESSURE COOLANT 50 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS CONTROL UNIT HEIDENHAIN iTNC 530 WEIGHT 19500 Kg OVERALL DIMENSIONS 5850 x 3880 x 3860 mm ACCESSORIES PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LINEAR SCALES NOTE TOTAL RETROFIT ON CONTINUOUS POSITIONING A and B-AXIS HEAD AND ON ELECTRO SPINDLE (YEAR 2021)

Vertical machining center Victor Taichung AX630 5-axis Fanuc OIMF Make: Victor Taichung Model: AX630 X-AXIS TRAVEL 700 mm Y-AXIS TRAVEL 500 mm Z-AXIS TRAVEL 500 mm DISTANCE SPINDLE NOSE-TABLE 100-600 mm DISTANCE COLUMN-SPINDLE AXIS 300 mm RAPID FEEDS X-Y-Z 48 – 48 – 48 m/min SPINDLE 12000 rpm; 11-15 kW; BBT-40 B-AXIS -30° + 110 ° C-AXIS 360 ° TABLE DIAMETER diam. 630 x 500 mm MAX ADMITTED LOAD 300 Kg TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 76 (125) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 7 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 5,3 s CONTROL UNIT FANUC 0i-MF WEIGHT 9000 Kg OVERALL DIMENSIONS 3580 x 4475 x 3040 mm

Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.

Ball bearing linear guide with 3 carriages, SHS55LC3DDHHC0-1140LP, THK, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws, sychron motors and linear guides in various designs. Please have a look at our website of IPV GmbH. Linear guide with ball chain type SHS55LC3DDHHC0-1140LP from THK consisting of: -1 pc. Guide rail 55mm x 1140mm long - 3 pcs. Carriage SHS55LC Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

SPECIFICATIONS: cutting height mm: 90 cutting width mm: 310 Width transport carpet mm: 340 Tool min - max.: mm: 280 - 360 Power KW: 22 1 device saw blade adjustment 2 adjustable lasers Closed transport chain Complete with: - 1 selection table - 1 chip conveyor belt - 1 double discharge conveyor

Ball-bearing linear guide with 2 carriages, MR55-A2-1244-22-22-G1-V3-GP, Schneeberger, as good as new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, has been in stock for some time, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws, synchronous motors and linear guides in different designs. Take a look at our website of IPV GmbH. Linear guide with ball chain type MR55-A2-1244-22-22-G1-V3-GP of Schneeberger consisting of: -1 guide rail 55mm x 1244mm long - 2 pcs. guide car MR55-A2 Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we ...

format 34 x 52 cm Year of construction 2006 Crestline film dampening units Rubber / Rubber - 1/1 printing automatic film change Automatic blanket washing device Pre-stacking device Chain delivery Dry pollinators in conjunction with CTP System for Paper Plates Mitsubishi SDP ECO 1630 incl. RIP / Software / Calculator Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...

Schatz Advanced screwdriving system Schatz screwdriving system Length: 5450 mm Height: 3000 mm Roll-off block Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist 1 x Treasure 907500 System without Advantech TPC-1260 TE Touch Panel PC Item location: 42859 Remscheid Disassembly and transport by the buyer. The disassembly, loading, as well as transport can alternatively be offered by us. Find more screwdriving systems in other sizes - new and used -

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

Type M, Factory No. 15864 Load capacity 3200 kg Projection 4000 mm UK beam 4820 mm YOC 1998 engine. Pan 360 degrees Chain hoist Liftket YOC 2014 type 3200/ 2-5/1,25 Factory No. E 33594 With motor. Chassis EF 320 , 24 V Prufbuch, acceptance examination etc. Crane was dismantled on 30.11.2022

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Stroke max. 515 mm Construction height Table bottom with rail castors 535 mm Height Table bottom without rail castors 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed Rail chassis approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual switch for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the underframe- Lifting shears with two lifting cylinders - The table was movable on rails, 4 rollers on the base, 200 mm - Drive of the rail rollers via SEW Gear motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm net weight approx. 1.3 ton. good condition; used

Slide belt magnetic conveyor, magnetic slip conveyor GÖSSLING Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Masch. Nr: 21113628 02 / 2053405 60 Year of construction 2002 / 2016 overhauled Slide width 255 mm Distance of permanent magnets 270 mm Insertion length approx. 1000 mm Insertion height 200 mm Insertion width 390 mm Conveying height - ejection height approx. 1000 mm Conveying speed approx. 15 meters/min. Motor power belt drive approx. 0.55 kW Mains connection 400 volts, 50 Hz - circulation chain equipped with permanent magnets - Height without galvanized sheet metal cover 1360 mm Space requirement L x W x H 3200 x 600 x 1500 mm Weight 275 kg very good condition; used

sheet width - max.: 0600 mm coil weight: 3,00 t coil internal dia.: 465 - 530 mm total power requirement: kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 2,72 x 1,70 x 2,40 m material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available The data for this ad was cre ...

Machine Details Stock-No. 1105-03789 Type of machine Machining Center - Vertical Make CINCINNATI Type sabre 1250 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time immediatly Freight basis FOT Technical details X-Travel 1270 mm Y-Travel 762 mm Z-Travel 820 mm spindle 11 kW spindle turning speed range 60-8,000 rpm toolpiece magazine: chain magazine 21 pieces tool taper DIN 69871 ISO 40 table-size 1,370 x 760 mm control fanuc om total power requirement 30 kVA weight of the machine approx. 9 t Additional information FANUC OM Technical details and information subject to amendments and errors.

Substructure painted Automatic machine with chain drive width: 450 mm Band height: adjustable Spray nozzles: 3 pcs. With pressure control Technically repaired

Fully automatic high speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The high number of cycles with up to 75 cycles per minute is achieved, among others, by using a timing belt drive instead of a timing chain. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 75 cycles/minute (corresponds to: max. 150 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1 ...

Bulk Bag unloading system. INCLUDING lifting crane (HITACHI), stainless steel version and INCLUDING screw conveyor (capacity 8-10t/h) | max. bulk bag size: L1200xW1200xH1100mm | 380V, 2kW | electric chain block speed: 10.05m/min | lifting speed: 6.8m/min | Machine dimensions: L3200xW1700xH5000mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of chain bags (flat pouches) with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm | filling capacity: max. 180ml | max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min) | 6.5kW | 13m?/h | machine dimensions: (L)4 ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of chain bags (flat pouches) with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(50-120)xW(50-110)mm | filling capacity: max. 60ml | max. speed of the machine in neutral: 70 cycles/minute | 2.5kW | 6m?/h | machine dimensions: (L)2200x(W)750x(H)1400mm | weight: 700kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and ...

Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...

Fully automatic paper labelling machine with PLC control or touch switch knob control, photoelectric device, variable speed motors and conveyor chain. - Specification: label length: max. 300mm | label width: max. 120mm | max. speed of the machine in neutral: 83 cycles/minute | power: 220V, 50Hz/60Hz, 1.75kW | machine dimensions: approx. L2440mm?W1000mm?H1300mm | weight: approx. 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm | label width (backing paper width): 10-150mm | bottle diameter25-130mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 50Hz/60Hz. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic paper labelling machine with PLC controlled or touch switch knob control, photoelectric device, variable speed motors and conveyor chain board. - Specifications: label length: 250-600mm | Label width: 65-195mm | bottle diameter: 80-190mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 33 cycles/minute | power: 220V, 50Hz/60Hz | machine dimensions: L2000mm?W900mm?H1500mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are  ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of chain bags (flat pouches) with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are continues filled per machine cycle, whereby a higher output will be achieved per minute. For the production process 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-180)xW(50-90)mm | filling capacity max. 100ml | max. speed of the machine in neutral: 150 cycles/minute | 4.5kW | 12m?/h | machine dimensions: (L)3 ...

Used roller conveyor / conveyor technology / conveyor track Condition: used Colour: orange Feet to be ordered separately Expertly dismantled and packed Length of 20,800 mm Price per meter Specifications Dimensions roller conveyor approx. Total length approx. 20,800 mm Plant consists of 8 segments Segment length: 2,600 mm Drive type: Chain actuator Total width incl. motor: 1,150 mm Total width without motor: 910 mm Conveying width: 670 mm Roll width: 700 mm Roll diameter: 70 mm Axle distance: 165 mm Web height: 100/50 mm Pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent ...

Table length: 9000 mm Table width: 3000 mm Longitudinal X: 8000 mm Cross Y: 2500 mm Vertical Z: 1500 mm Positions ATC: 100   CNC Brand: Heidenhain CNC Model: HeidenHain iTNC530 ATC Chain 100 positions TUPCG5 Milling head 360.000 x 0.001 Gr Torq 1180 Nm Head changer with 3 positions Double HeidenHain iTNC 530 Index table 1200 mm  X-Axis:               8000mm Y-Axis:               2500mm Z-Axis:               1500mm Table Length:         9000mm Table Width:          3000mm Power on spindle:     46kW Spindle speeds:       5000Rpm Spindle Taper:        50 + HSK 63ISO/Bt/Mk Feed rate X-Axis:     35000mm/min. Feed rate Y-Axis:&n ...

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning

turning length: 3000 mm turning diameter: 800 mm turning dia. in gap: 1000 mm turning diameter over slide: 540 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3820 kg. dimensions: 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light  ...

Key data: 2070 , 5

Ostas SMR-S 2070x170 Premium - 3-roll sheet metal rolling machine with premium equipment Bending length: 2070 mm Capacity: 5 - 6 mm Standard equipment - Steel machine body ST-52 - large shafts made of certified steel with SAE 1050 (CK-45) - Chain and belt driven spiral gearbox for top and bottom rolls - Precision bending with brake motor - rear roller motorized - Manually extendable roller - Tape bending roller - Central lubrication system - Mobile control panel - Compliance with CE standards -User guide Included additional equipment - Digital display for lower roller - Digital display for rear roller - lower roller motorized - Hardened rollers - Extended roller shafts for fastening profile and tube bending rollers Optional equipment - Profile tube rollers Specification - Bending length: 2070 mm - Capacity with pre-bending: 5 mm - Capacity without pr ...

Technical Data and Specifications Mag Schymanski bottle washing machine typ Sirio 7-10 Capacity:3600-8000 bph Machine design: stainless steel Working method: Continuous Max. bottle diameter: 75 mm Max.bottle height: 290 mm Bottles in machine: 1,720 pieces Bottle cell carrier: 172 pieces Cell pitch: 95 mm Chain pitch: 140 mm Power consumption: 12.33 kw Fresh water conn.: 2,300 liters per hour at 1.5 bar Heat requirement: hourly output x 14.01 = requirement Kcl. Empty weight : 12,000 kg Full weight : 19,000 kg Length: 7000mm Width: 2095mm Height: 3000mm

Engine: Diesel engine CAT C9 Power: approx. 261 kW / 350 PS - Waves with 7/7 writing with 5 knives per write (regenerated) - Refractive beam with comb (regenerated) - Chain drive - Discharge belt with discharge height of approx. 3,400 mm - Permanent - Belt magnet with hydraulic height adjustment -Remote control Weight: approx. 24 t regenerated according to HAMMEL standard

offer 22484 Technical data approx.: - Load capacity 250 kg - E. chain hoist ABUS 250 kg - 2 lifting speeds 1.8 + 7.2 m/min - Outreach approx. 2000 mm - Hook height approx. 3000 mm - Swivel radius approx. 360 ° - Undercut booms 3500 mm - Total height approx. 3700 mm - Stand stand / bucket approx. 1100 x 1100 mm - Total length approx. 3100 mm - Bucket weight with filling approx. 3400 kg - Total weight approx. 3900 kg

Specifications: Passage width: 600 mm Passage height: 250 mm standard Hood length: 1,700 mm Transport length: 2.100 mm Transport chain: link mesh tape with chicane Current type: 230/400 Volt three-phase current N-PE Heating capacity: adjustable from 4 - 18 kW Power: 19 kW Throughput speed: infinitely variable Colour: creamy white-grey

Boom 5 +6 m 2 pcs available ABUS GM 3 chain hoist, complete with underlays

built 2009 - last recurring examination 10/21 - complete with test book, declaration of conformity, acceptance test, etc. - Boom 6 m, up to 400 kg - Chain hoist Star Liftket BF 021/51 500/2 - 4/1 - complete with wall brackets, cable drag, etc.