843 offers

Category: 203
item-No.: 126917005
-
8.500 €
-
Weinig four-side Planer Type: PFA 17 N Planing width 180 mm Planing height 130 mm 1980 mm length of the dressing table 6 waves: 1 down 4 kW 2. right 4 kW 3. left 4 kW 4. right 4 kW 5. top 5,5 kW 6 below 4 kW 3 smooth sliding rollers in the table, 1 each for the 2nd, 3rd, and 4th spindle Spindle diameter 35 mm Feed chain 6.3-36.5 m / min. Feed motor 2,2 kW Manual Waxilitpumpe with 4 straight planing heads -all feed rollers new - wheels new -Air hoses new -Compressed air regulator new - wa ...
Category: 702
item-No.: 126938391
type JB 260, working width 256 mm, \r\n2 speeds, cap. max. 50 + 42 strokes/min.\r\naccessories: wire cut (1 design), 4 rows,\r\ninput by a chain for plates 256 x 625 mm
Category: 1406
item-No.: 126901788
Manufacturer Bollegraaf Recycling Machinery Type HBT 1900 Year of construction 1992 Drive power 2,2 kW, 1.410 / 1.710 min?¹ Electrical power supply 400/690 V / 50 Hz Nominal current 5,0 A Quantity of tappets 36 Height of driving axle over ground approx. 3.650 mm Feeding conveyor 6.600 mm Elevating conveyor 13.950 mm Goose neck 1.000 mm Height of lateral wall for feeding 530 mm Height of lateral wall for elevating unit 840 mm Grade 32° Total width approx. 2.400 mm Belt width approx. 1.900 mm Effect ...
Category: 702
item-No.: 126938549
for the depositing of cream, jam and other sandwich mixes\r\ncap. adjustable max. 22 strokes/min. \r\nworking width max. 600 mm, \r\naccessories: \r\n-1 depositing with straight device, 6 rows\r\n-chain with plastic holder 600 x 110 mm on this can be put\r\n biscuits in 6 rows for depositing cream on\r\n
Category: 107
item-No.: 126885095
DECOILER with integrated coil liftung unit coil weight 8,0 t mandrel length 1.060 (1.080) mm coil inside diameter 508 mm coil outside diameter: max. 1.500 mm height - middle of mandrel 850 mm power 7,5 kW expanding hydraulically adjustment of decoiler hydraulically press roll I hydraulically + driven by chain press roll II pneumatically + not driven brake system: disk brake Working direction right - left
Category: 702
item-No.: 126938109
sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear
Category: 1405
item-No.: 126869343
Technical data: -E. chain hoist PFAFF BJ. 2004 -Operation via Hall Remote button -Load capacity of 125 kg -Hoisting speeds 1.5 / 8 m / min -RADIUS 2700 mm -Hook height approx. 2300 mm -Bottom bracket approx. 2700 mm -Total height approx. 4250 mm -Column diameter approx. 215 mm -Foot plates dimensions of the column of 720 x 720 mm -Slewing RADIUS 270 ° -Drive 400 V - total weight approx. 400 kg
Category: 1900
item-No.: 126930076
-
used machinery auction RESALE 55 €
Land-ch CH
Weight approx.: 150 kg Dimensions (l x w x h) approx.: 5000 x 2500 x 1200 mm Description: with chain hoist, for ceiling mounting
Category: 1406
item-No.: 126869337
Manufacturer BOA Enschede, Netherlands Type KT-1200 Year of construction 1992 Effective width 1.100 mm Feeding conveyor length 4.000 mm Elevating conveyor length 4.800 mm Height of driving axle over ground 2.950 mm
Category: 1900
item-No.: 126930100
2003
used machinery auction RESALE 3.500 €
Land-ch CH
Weight approx.: 2300 kg Dimensions (l x w x h) approx.: 6500 x 2200 x 3500 mm Description: Mileage according to readout 148393, first registration 15 October 2003, last check 27 December 2017, 3 seats, Diesel engine, displacement 2800 cm³, empty weight 2250 kg, payload 1250 kg, towing capacity 2800 kg, emission code A 03, including radio and navigation system TOMTOM, air suspension at the rear axle, including snow chains, superstruction DA-PONT, interior 4100 x 2000 x 2500 mm, defects: lock driver door without fun ...
Category: 1405
item-No.: 126869331
Technical data: -E. chain hoist PFAFF BJ. 2004 -Operation via Hall Remote button -Load capacity of 125 kg -Hoisting speeds 1.5 / 8 m / min -RADIUS 2700 mm -Hook height approx. 2300 mm -Bottom bracket approx. 2700 mm -Total height approx. 4250 mm -Column diameter approx. 215 mm -Foot plates dimensions of the column of 720 x 720 mm -Slewing RADIUS 270 ° -Drive 400 V - total weight approx. 400 kg
Category: 102
item-No.: 126929178
turning diameter:520 mm turning length:500 mm control:Fanuc 0i-TF turning diameter over bed slide:320 mm max. swing diameter:520 mm spindle speeds:4500 1/min. spindle passage:51 mm spindle drive:15/11 kW C-axis:0,001 ° tool turret:12-fach mit BMT-65 RADIAL, VDI40 _ feed stepless:0,001-5000 mm/U travel -x axis:200 mm travel - z:600 mm rapid power traverse in X-and Z direction:30 m/min taper in tailstock:4 MK tailstock quill stroke:100 mm tailstock adjustment:500 mm weight of the machine ca.:4000 kg Overall size:3,6 ...
Category: 1405
item-No.: 126869320
Technical data: -Load capacity hoist E. chain hoist make steel 5000 kg - lifting speeds approx. 1.00 / 4 m / min -Katz speeds approx. 20 / 5 m / min -Slewing speed approx. 0.53 / 0.27 m / min -RADIUS approx. 5000 mm -Height approx. 2600 mm -Bottom bracket approx. 3300 mm -Total height approx. 3970 mm -Column diameter approx. 1000 mm -Slewing RADIUS 360 ° -Drive 400 V - total weight approx. 3500 kg -Test book
Category: 102
item-No.: 126929026
turning diameter:520 mm turning length:600 mm control:Fanuc 0i TF swing diameter over bed slide:320 mm max. turning diameter:280 mm Bar capacity:64 mm spindle speeds:3500 1/min. x-travel:200 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min tailstock quill stroke:100 mm tailstock adjustment:500 mm spindle drive:11/15 kW Machine size (LxWxH):3,440x1,820x2,380 mm machine weight:4100 kg chip conveyor: live center:4 MK heat exchanger: coolant system: turret:12-fach, VDI 40 soft jaw: Boring bar holde ...
Category: 1405
item-No.: 126869282
-with E - chain hoist Make: DEMAG type: DCS-PRO 2 Machine no.: 93690666 year of production: 2006 Technical data: -Load capacity 250 kg -Reach 3200 mm -Hook height approx. 2050 mm -Slewing RADIUS 360 ° -Hoisting speed 0.15 up to 30 m/min - hack way up to 5000 mm -Operation via Hall Remote button -Drive 400 V - total height approx. 2750 mm -Stand area stand / bucket 1050 x 1050 mm -Total length 3850 mm -Bucket weight without / with charge 530 / 2704 kg -Total weight approx. 3500 ...
Category: 107
item-No.: 126912498
sheet width: 1550 mm plate thickness: 2 mm no of strokes: Hub/min --------------------------------------------------: OVERALL SPECIFICATIONS (COIL LINES): - sheet width max: 1550 mm - sheet thickness max: 2 mm - max. weight of coil: 20 to - feed velocity max.: 60 m/min COIL CHAIR: - max. weight of coil: 20 to DECOILER: - design: single reel: - sheet width max: 1550 mm - sheet width (min): 250 mm - max. weight of coil: 20 to - max. diameter of coil: 1800 mm - mandrel expansion range from ... ...
Category: 201
item-No.: 126869200
-
20.000 €
-
4 sheets of lumber circular saw shoe overhauled Cutting height 350 mm Driven roller conveyors - pull-out roles in addition to the saw blades Chain feeder up to 6 m timber length, with more than foot-switch option Einzugsdorne Feed continuously adjustable Electric width adjustment 4 pieces Sägemotore, power 4 x 18 kW 4 pieces Auszugsrollenmotore, power 4 x 0.37 kW 1 piece feed gear box, power 2,2 kW 1 piece cutting width adjustment motor, power 0.18 kW Total capacity 76 kW Round wooden cross conveyor 2 - ...
Category: 204
item-No.: 126911756
-
used machinery auction RESALE 500 €
Land-de DE
Weight approx.: 3000 kg Dimensions (l x w x h) approx.: 3000 x 2000 x 1800 mm Description: Turning lenth max. approx. 550 mm, workpiece diameter max. approx. 80 mm, spindle speed stages 2000/2600/3200/4000/5000/6700 rpm, with workpiece feeding magazine, sanding machine with 10 loading places, workpiece transfer from automatic lathe to sanding machine and chain discharge unit
Category: 410
item-No.: 126854022
-
55.000 €
Land-pt PT
Automatic depaletizer Automatic layer pad separator Double inlet chain conveyor Out put: 3 layers/min. Pallets from 880 x 1.100 up to 1.400 x 1.100 mm
Category: 209
item-No.: 126911859
1999
used machinery auction RESALE 3.200 €
Land-de DE
Weight approx.: 14500 kg Dimensions (l x w x h) approx.: 26000 x 2500 x 2200 mm Description: Machine number 106860499, the machine was designed for the production of solid wood made from wood strips, wood type hardwood, workpiece dimensions 350 to 2450 mm, width 40 to 100 mm, thickness 14 to 80 mm, wood moisture 8 to 10 %, facility components: position 1 hydraulic lifting platform with roller conveyor, dimensions 1300 x 2500 mm, lift 1000 mm, load capacity 2000 kg, light barrier control for the automatic speed up d ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: