chain used for sale

- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

Conveyor for horde wagons or similar. Chain conveyor Total length approx. 25 m Feed infinitely adjustable

Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

4 lifting devices are for sale 2 x 1 compartment for receiving two powder guns 2 x 2 compartment duplex for recording 4 powder guns . Lifting devices with trolley chain guide, With drive motor and transmission, As well as with incremental encoder. Inductive switch top / bottom . Connections guided to Harting plug

CNC,5 Axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min , Force (N) 9000 Acceleration 4,5 m/sec2 Y-3000 Speed up to 60m/min , Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min , Force (N) 9000 acceleration 7,2 m/sec2 C - +/- 200 straight , torque 1200Nm ,max. torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm ,Maximum torque with clamped axis 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write e-mail. Machine is immediately available and if you are seriously interested, you can inspect it under power An invoice with VAT will be issued

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

KRÜSI chalet construction machine / log cabin production system type CM 40 POS 1: Motor-driven roller conveyor Working width 400mm, infinitely variable feed speed 2.0 kw motor, length 6000mm POS 2: Ripsaw Diameter saw blade 400mm Pneumatic feed of the sawing depth Main motor 4.0 kW POS 3: KRÜSI chalet construction machine / log cabin production machine type CM 40, year of construction approx. 1985 Horizontal milling unit Cutter - Ø 180mm Cutter width max.130mm from cutter width 60 mm only cutters made of aluminum alloy with 1 motor with manual feed, kW 2.2 POS 4: Drilling unit: Hydropneumatic feed Clamping Ø max. mm 16 Drill bit- Ø max. mm 32 Motor min'1 1450, kW 1,8 POS 5: KKRÜSI RÜSI chalet building machine / log cabin production machine type CM 40 Machine No.431 Year of construction: 1996 Sawing unit: Hand feed Spindle adjustment wit ...

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter  ...

Powder coating line: 1. Chain conveyor 2. Continuous painting furnace 3. Pass-through spray booths connected to the paint recovery system: 3 pcs. 4. Pass powder cabins without recovery: 3 pcs / pass-through spray booths without recovery: 2 pcs. 5. Manipulator (up & down movement) with powder sprayer: 1 pc. Automatic manipulator (up-down) with paint applicator: 1 pc. 6. Powder sprayer: 1 pc/ powder paint applicator 1 pc.

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ conveyor conveyor conveyor -powered Condition: Used Total length: approx. 10400 mm Plant consists of 4 segments Segment length: approx. 2600 mm Drive type: Chain drive Total width incl. motor: approx. 1350 mm Total width without motor: approx. 1130 mm Conveying width between rollers: approx. 900 mm Roll width: approx. 1010 mm Wheels/axle distance: approx. 165 mm Roll diameter: approx. 70 mm Web height: 100/ 50 mm Material: Steel Color: orange Stock: 10.4 meters Price per meter Conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for yo ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

Machine with painted aluminum structure, equipped with Lexan protections complete with micro safety. Easy to clean and accessible. Technical data: Length mm 3750 Width mm 2700 Height mm 2080 Sliding surface height mm 700 – 1000 Weight Kg 1600 Voltage Volt 400 Frequency Hz 50 / 60 Current A 11 Mechanical speed carton / min 200 Production characteristics: Case length mm 75 – 350 Case width mm 140 – 450 Case height mm 120 – 350 Equipped with: one input product feeding belt; pneumatic product elevation group; stainless steel AISI 304S stacked product collection hopper with independent motorization; product introduction group with own motorization complete with encoder. The machine is also equipped with inclined carton magazine with a capacity of about 50 cartons; carton picking unit, with suction cup arm with independent motor complete with encoder; carton tr ...

CARIBA CARTONING MACHINE, MODEL C222 Year of construction: 2015 Automatic horizontal cartoner with intermittent motion. It has a completely enclosed structure with safety devices on all the opening parts to ensure overall protection and compliance with all the current safety regulations. The machine is equipped with feeder. TECHNICAL DATA Approx.. net weight: Kg 2000 Length: mm 4400 Width: mm 1700 Height: mm 1820 Feeder dimensions: mm 3900 x 950 x 1300 Frequency: 50 Hz Voltage: 400 volts Production characteristics: Carton width mm: min max 15-150 Carton height mm: min max 15-50 Carton length mm: min max 55-250 Capacity speed: 100 cycles/min Electric consumption: 5 Kw/h Pneumatic supply: 6 bar The carton is picked up from the feeding area through a suction cup system, during translation it is splayed and opened and then placed on the chain equipped with trans ...

Offer 23357 THE CRANE CAN BE VIEWED AT THE D-03042 COTTBUS SITE BY APPOINTMENT. Technical data approx.: - Load capacity 2000 kg - Track gauge approx. 6.5 m - Operation via handheld remote probe - Hackenweg up to approx. 5000 mm - Reeving 4 / 1 - Vertical clearance approx. 600 mm - Wheelbase approx. 2000 mm - Driving beam length approx. 2360 mm - Speeds approx. - Cat chassis approx. 20 5 m/min - Hoist approx. 4 + 1.0 m/min - Crane chassis approx. 6.3 + 25 m/min - Total weight – crane approx. 1500 kg - without pictured chain hanger

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

Sleevit Shrink tunnel Model: Shrinkmaster 750 Stainless machine on variable speed stainless slat chain conveyor, belt width 120mm, max product height 250mm, overall length 3000mm, 3Ph

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 900 x 630 mm Stainless steel chain Plastic cup approx. 600 x 220 x 130 mm Gearmotor North 1.5 kW Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Pipe hangers, manhole rings -Load capacity: 3 to -Chain length: 1100 mm -Net weight: 96 kg

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

Pipe hangers, manhole rings -Load capacity: 10 to -Chain length: 2000 mm -Own weight: 80 kg

Crawler axle, crawler chassis, mini excavator, chain excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -Clamping cylinder

Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed.  ...

Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...

SYMCO KH-226 Bar Feeder MAX DIAMETER 20 MM MAGAZINE ROD LENGTH 2MT SINGLE ROD 3MT STEP MOTOR CHAIN ​​DRIVE THROW PUSH TORQUE ADJUSTABLE FULL AUTOMATIC NO MORE ROD THROW ALARM SUPPLEMENTARY FROM WORKSHOP LITTLE USE IN NEW SETTING IN WORKING CONDITION

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

Used KAR 1 cardboard box closing machine. The device is used to automatically insert the tube into the cardboard box. The cartons are previously unfolded and pressed into special slots on the chain conveyor. The box passes through the individual slots, activating subsequent actuators closing the box. At the end of the transporter there is a receiver that takes out the cardboard boxes. Packaging of 3 pieces takes place on the conveyor belt, and then it is turned by 90 degrees and taken out of the machine.

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

For sale is a premium class PRINZ PC120 pallet cutter. The largest machine of the manufacturer. 12 m loader 12 m unloading table. From 0.65m to 12m automatic size adjustment. 6 preset programs, multiple sizes within 1 program. With 2 waste handling boxes. Automatic chain lubrication. 125cmx125cm stacking size.

year of manufacturing: 1996 with 10 bottles/row capacity: 1.600 - 3.600 bph gas directly heated (on request the gas burner can be changed for an oil burner against charge) incl. automatic label discharge stainless steel water baths completely reconditioned incl. new main chain and new bottle cells

Swimming / sinking system, swimming / sink container with discharge belt, washing bath, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: NUNBERGER conveyor systems Type KB 600 Filling height approx. 2 m Bathroom approx. 4 x 2.4 x 1.6 m Chain tape for discharge of sinking materials Bandwidth approx. 600 mm Belt drive with gear motor 1.5 kW (dismantled due to transport height) Total dimensions: approx. 5.5 x 2.4 x 3.1 m The plant was used in fruit and vegetable production. It is also possible to use plastic to clean. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Full impact with side folding Take-over chain for angular products, upright

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2

Cell sluice,light metal,gearmotor and chain drive,0,18 kW,Ø7"

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bridge paternoster / carousel / long goods paternoster for long goods up to approx. 6,60m, 700kg / gondola – used - : Price site: 32.500.-€ (net), plus dismantling etc.! Manufacturer: Schultheis (CH) Type: IPN 11/TL Fab.-No.: 93-03018/2 Year of construction: 1993 Payload per hanger: 700kg Total payload: 7.700kg Number of gondolas: 19 pcs. Connected load: 2x1,5kw, 3x380V Control voltage: 220V, 50 Hz Single-sided tensile force: approx. 20% Dimensions: L=6750mm, W=7750mm, H=4460mm Dimensions of the gondolas: L=550mm, W=6600mm, H=330mm The control system was renewed in 2001 and all documents are available. (Instruction manual and control manual) TÜV and DGUV test reports are available. Load handling device, drive via roller chain with guide rollers for nacelle transport Control: Main control station on the extraction side: electronic panel with dead man's or dea ...

fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large di ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z80000/80000/80000 mm/minRapid feed X / Y / Z80/80/80 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorPackage Mill / Turn 12,000 rpm, HSK-A100Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm  ...

sheet width: 1275 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 3 kW weight of the machine ca.: 875 kg range L-W-H: 1,7 x 1,68 x 1,1 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Piece counter: Squaring arm: Support arms: The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensio ...

pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...

1000 litre bottom flap mixer with ploughshares 3 kw-67 rpm Chain drive