We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,095 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good
used
We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...
used
ertikal machining center, used, from location vertical machining center, used, Model/ model: VS 500 SPEED Fabr./ make: NORTE Year built/ year: 1999 Control/ control: SIEMENS 840D x-Way /x-travel 2000 mm y-way / y-travel 500 mm z-way / z-travel 500 mm Feed: 1 - 8000 mm/min Table size / table-size 2120 x 550 mm Table load / table load 2000 kp Rapid gear X-axis / rapid traverse X-axis 40 m/min Rapid gear Z-axis/ rapid traverse Z-axis 20 m/min Tool holder / tool taper HSK 63 A Spindle speeds - infinitely variable/ spindle turning speed 0 - 15000 rpm Spindle drive/spindle motor 20 kW Spindle bearing diameter / spindle bearing diam. 70 mm Position accuracy / position accuracy: 0.020 mm Control SIEMENS 840D Tool diameter: 63 / 126 mm Tool Magazine: Chain Magazine/ toolpiece magazine: 40 pieces Total power requirementm.65 kVA Machine w ...
used
Chain cup movement in modular design, i.e. horizontal and vertical conveying path are variable (last selected installation: 6.0 m horizontally below > 3.0 m vertical > 18.2 m horizontally above). Incl. plastic pendulum cups, box vent 410 mm x 410 mm in different lengths, drive station with geared motor 1.1 kW / 56 UPM, conveyor chains, 2 pcs. deflection stations, clamping stations, return locks and 3 pcs. outlet stations. Conveyor speed: 0.25 m/s.
used
Solid pump sewage sludge pump Saxlund with double hydraulic aggregate 90Kw + 18.5 Kw used Solid pumping system consisting of 2 x solid piston pumps (duplex pump) oil-hydraulic drive/hydraulic unit. For reliable conveying of sludge of all kinds. Manufacturer: Saxlund 2 cylinder solid piston pump / double pump: Type: 119083 Komm.Nr. 2925-30/59410/2 Operating pressure: max. 280 bar 100/63/1000 Outer diameter: 140 mm Inner diameter: 13 mm Dimensions: 1x approx. 3,700 x 700 x 1,300 mm Dimensions: 1x approx. 3,750 x 850 x 1,800 mm Drive hydraulic unit: Square Bosch Hydraulics Saxlund 9710026 HA1-0 4069 No. SAX.2925-30 Built: 1998 V = 1200 P = 90 kW P = 18.5 kW Dimensions: approx. 2,400 x 1,700 x 1,900 mm ---------------------------------------------------------------------- ---------------------------------------------------------------------- ---------------- ...
used
Chain elevator in modular design, horizontal and vertical conveying distance are variable (last used setup: 6,0 m horizontally at bottom > 3,0 m vertically > 18,0 m horizontally at the top), Incl. plastic pendulum buckets, steel ducts 410 mm x 410 mm in different langths, drive station with gear drive 1,1 kW / 56 RPM, conveyor chains, 2 pcs. drive- directing-stations, tensioning-station, return stop mechanism and 3 pcs. discharging stations. Conveying speed: 0,25 m/s.
Feed chain wheels suitable for dimter DKV 5
used
SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good
pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure ...
used
5-deck vibrating screening machine, screen area 1.4 m x 0.5 m each, incl. 2 pieces of unbalance drives (type: MO-90/4, 0.8 kW / 1.460 UPM each), clamping bushings, chain crates for screen cleaning, 5 pieces of screen coverings (various sizes available to choose from) and base with spring bearings. Dust-tight design, inlet oval, currently 2 outlet nozzle SN 150 (expandable). Very few operating hours, completely overhauled in 2017.
used
Condition needed Element Length Element Width Surface Drive Missing Parts Head conveyor 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft, 2 x rollers Congestion conveyors 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2060 1060 lacquered n.a. no 2000 1060 lacquered n.a. 1 x roller 2060 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquer ...
used
Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...
used
– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...
used
Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel
used
1 piece of scratch chain foerderer 900/500 mm (W/T) length = 34 m; Very good
used
CNC,5 axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min, Force (N) 9000 Acceleration 4.5 m/sec2 Y-3000 Speed up to 60m/min, Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min, Force (N) 9000 Acceleration 7.2 m/sec2 C - +/- 200 Straight , Torque 1200Nm ,Max torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm, Max torque with clamped axle 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 Kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write an e-mail. Machine is immediately available and in case of serious interest can be visited under power An invoice with VAT will be issued
used
After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated
used
Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...
used
Punching and forming center in chain with an assembly line for the production of relays, see pictures
used
Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE
used
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
new
Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m
used
Used tumbler capacity 2200 liters made by Lutetia. Control new Mixster, pump 40 or 60 m3 Busch after technical service, on the inverter, drive chain gear after service.
used
Printshop for sale as packackage: Manufacturer: Didde Model: Glaser 24" (860) year: 1981 model 205727 Condition: five-color press that rolls nicely today and runs both roll-roll, roll-fold and roll-sheet. Not jumbo rolls. 450 mm wide. Location: sweden Price: on request Manufacturer: Didde Model: Glaser 16 2/3" (860) year: 1980 model 205727 Condition: four-color press that rolls nicely today and is very well maintained and has completely new extra rollers. This runs roll-roll and roll-sheets. Not jumbo rolls. 450 mm wide. Location: sweden Price: on request Manufacturer: Hamilton blue roller collator Condition: works perfectly Location: sweden Price: on request Collator Manufacturer: Schober Hochdorf Model: SR 1 CR for chain forms year: 1982 Location: sweden Price: on request Runway Manufacturer: Hunkeler Model: SBA 19 with over 100,000 runway ...
used
M. No.: 13-6-193497 // Ser.No. : 985286 // Power : 3000 – 10`000 B / h Format (cm): A3+ Equipment / Additional information: Printing area: 297 mm x 420 mm Sheet sizes: min. 55 x 75 mm max. 315 x 445 mm Paper weights: 30 - 400 g / m2 Gripper edge: 8mm Sheet feed system: Suction feeder Paper delivery system: chain delivery including powder applicator and air shower Ink rollers: 2 applicator rollers 11 distributor rollers Dampening unit: Integrated inking / dampening system Electric connection: 220 V, 50 Hz, 16 A
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...
used
PA 21/3 High-performance brochure inserts for pre-folded brochures/package inserts Technical features: -Drive on the right -Solid construction -Low-noise drive - without gears -Modular system - Highest performance through the use of double curve, crank drive and electronically controlled stepper -Compulsory handover Sizes: -Inlet width max. 210 mm min. 60 mm -Inlet length max. 105 mm min. 15 mm Paper weight: -Recommended paper thickness 45 - 100 g/sqm Achievement: -Depending on paper quality and fold up to 400 rpm. Drive: -via chain Mass and weight at PA21/3: 1600 x 640 x 500 mm (length x width x height) Weight: 84 kg Compressed air connection for solenoid valve vacuum control 6 bar, vacuum connection: 0.6 bar, compressed air connection (Festo valve) for pneumat. Swivel actuator 6 bar The PA 21/3 are similar in principle to the PA 21/2, but hav ...
used
Double swivel crane Saleg swivel crane Zasche GSX 2x500-4,5 Complete Saeule + 2x swivel arm + 2x chain hoist Crane hook height 3.5m / swivel arm length 4m Saeule with 2 swivel arm holders each 500kg load capacity Stroke designation RUDK / ub speed 4 m/min Total usage 611 hours / usage reserve 988 hours
used
GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...
used
Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm from the root and Length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm Neukv Roller chain driver: gear reductior transmission motor of 2.2 kW hydraulic unit 5.5 kW Total weght including main motor 5000 kg
used
Turning diameter: 730 mm Turning height: 1000 mm Chuck diameter: 610 mm Number of chucks: 1 CNC Brand: Mazatrol CNC Model: E Tower Matrix MACH-id 3536 MAKE Mazak TYPE INTEGREX 800 E - V 5 / II YEAR 2007 / 5000 Hours SPECIFICATIONS Controll E Tower Mazatrol Matrix Max. turning diamter Ø 730 mm Table / chuck size Ø 610 mm Workpiece height 1000 mm Work piece weight 880 Kg ATC tool changer 120 Spindle speeds / ranges 12000 Rpm Used Mazak Integrex 800 E - V 5 / II Multi Tasking Ø 730 x 1000 Height 5 Axis Simultaneously milling X Axis :1.100 Y Axis : 800 Z Axis : 900 B Axis : ...
new
Continuously variable speed gearbox, Variator VA31B101-72, Tos Znojmo, new Mechanical chain variator with stepless, electrical change of the ratio. - sufficiently large control range, - minimum maintenance requirements and - a simple operation Technical specifications: Drive speed: 950 rpm, Abtirebsdrehzahl: 448 to 2016 rpm Power: 2.85 to 5KW Torque: 60 to 24Nm Length: 660mm, width: 400mm, height: 580mm Weight: 145 kg State: The gearbox is brand new and was in stock as a spare part. Original packed
used
Hydraulic double acting pipe pulling and reducing machine Fabr. OWN CONSTRUCTIONFor connection of outer and inner tubeConsisting of:1.) Vertical hydraulic double acting pressxa0xa0xa0xa0xa0 Table size: 565 x 450 mmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Distance between the stands: 700 mmxa0xa0xa0xa0xa0 lateral. Passage: 285 x 200 mmxa0xa0xa0xa0xa0 Piston diameter: 90 mmxa0xa0xa0xa0xa0 External dimensions: 1400 x 650 x 2100 mmwith separate hydraulics2.) Horizontal hydraulic double-acting pressxa0xa0xa0xa0xa0 Power: 450 atmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Cylinder diameter: 100 mmxa0xa0xa0xa0xa0 External dimensions: 2400 x 1500 x 1200/3000 mmwith attached crane jib and STEEL chain hoist 600 kg3.) large lot of tools (about 30 pieces)xa0xa0xa0xa0 from 21.3 to 407 mmxa0xa0xa0xa0xa0 with intermediate sizes of 50, 57, 60, 60.3 mmusedPrice on request ...
used
Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.
used
1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...
used
Transport and pressure unit for oval pipes 3000 mm long at 80-1100 mm diameter (without lifting and traversing unit) - The device has a hydraulic supply built into the head (visible also in the picture). - Electrical supply with attached control box direct connection to 380 V. - Hand-held buttons for the pressing functions. W8bik - The unit was constructed according to CAD drawing set with principle drawing. - Required lifting unit max. 1 to. Chain hoist.
used
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
used
1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.
used
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
used
Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device
used
Two transport vehicles are sold. Dimensions from 800mm high; 700mm long; 400mm wide incl chain protection Inside transport width approx. 150mm and 500mm length. Vareducer gearbox infinitely adjustable
used
Lock Metal detector Model: Met30+ Stainless frame, slat chain belt, belt dimensions 1900mm x 80mm, aperture 140mm x 300mm, 3Ph
used
TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...
new
The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...
used
For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...
used
Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...
used
Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible
used
Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee
used
- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...
used
Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available