chain production used for sale

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

CHAIN NEXTRACTION BELT, 4.370 mm long, 5,5 kW motor, Spaggiari gearbox With central chain transport and paddles Flat type on supports Stainless steel structure, n.4 F218 bearings Construction year 2013 510 mm.outer width 410 mm.inside width, installed power - used power in work: about 60-65% : 5,5 kW, working width: 410 mm., conditions: checked

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Chainflex, data cable with plug -Type: CF11.006.D Art.-Hst. 6FX8002-2CA34-1,3M-I -Length: 1.3 m -Weight: 0.4 kg

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

The line is designed for applying a seven-color coating to the base with final packaging in consumer rolls. Non-woven or paper material can be used as a base, as well as other types of bases upon agreement with the manufacturer of the equipment. This equipment can produce the following groups of wallpaper: foamed vinyl, paintable wallpaper in widths of 0.53 m and 1.06 m on paper and non-woven bases. The line can be upgraded to produce an additional group of wallpapers - hot embossing (silk-screen printing). Upon individual request, the manufacturer (Olbrich GmbH&Co, Germany) develops a project for installing a calendering zone in this line. GENERAL PARAMETERS OF PRINTING LINE: • Manufacturer: OLBRICH • Year of production and year of putting into operation – 2010. • Mechanical speed - 150 m/min. • Production speed - 60-110 m/min. • Effective power consumption of electrici ...

Used line for the production of chocolate "bodies". Year of production 2008. The line includes: - acid-resistant tank with a capacity of 1000 L - 250L double ribbon mixer - CFA 3 body molding machine - TCH-600 pre-cooling tunnel

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - / Contact us at -

Production machine for making idefications bracelets e.g. for entry and access control made of PE or PE-LD roll goods. The machine was manufactured as a special machine by the company OKU. The system has not had many operating hours and is in very good condition. Function can be summarized as follows: unrolling – punching – inserting closure parts – separating into sheets – storing. Dimensions: approx. 8m length - approx. 6m width - approx. 2.5m height Machine in well-maintained condition with few running hours Processor: roll goods 350mm wide.. Stanze: for wide and narrow Versions: Feeding route: feed path to the vibration sensors for attaching the closure parts Delivery route: display of the sheets counted in boxes... Production Machine for Identification Bracelets see pictures This production machine is designed for manufacturing identification bracelets used ...

EMMEDCI MC 2004 RIGID BOX PRODUCTION LINE Manufacturer: EMMECI S.R.L Italy Type: MC 2004 Year of production: 2004 Max Sheet sizes: Length: 180 mm – 900 mm Width: 95 mm – 760 mm Box sizes: Length: 83-600 mm Width: 31-400 mm Hight: 12-190 mm Machine is in production. Test is possible Please contact PP Machinery for information or an inspection

This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine.

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

Selling complete switch production with know how. Production include: Bflvedy7tb 1. 51 moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 28 stamping tools for steel parts underconstruction of bottom switches and plugs 3. Complete assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 50000 parts on stock to assemblle 5. Packed finished stock of switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information with buyers list , price lists. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company has ISO 9001 AND IT ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

The line is designed for applying a seven-color coating to the base with final packaging in consumer rolls. Non-woven or paper material can be used as a base, as well as other types of bases upon agreement with the manufacturer of the equipment. This equipment can produce the following groups of wallpaper: foamed vinyl, paintable wallpaper in widths of 0.53 m and 1.06 m on paper and non-woven bases. The line can be upgraded to produce an additional group of wallpapers - hot embossing (silk-screen printing). Upon individual request, the manufacturer (Olbrich GmbH&Co, Germany) develops a project for installing a calendering zone in this line. GENERAL PARAMETERS OF PRINTING LINE: • Manufacturer: OLBRICH • Year of production and year of putting into operation – 2000 • Modernization and additional printing unit – 2005 • Mechanical speed – 6-120 m/min. • Production sp ...

The line is designed for applying an eight-color coating to the base with final packaging in consumer rolls. Non-woven or paper material can be used as a base, as well as other types of bases upon agreement with the manufacturer of the equipment. This equipment can produce the following groups of wallpaper: hot embossing, foamed vinyl, paintable wallpaper in widths of 0.53 m and 1.06 m on paper and non-woven bases. GENERAL PARAMETERS OF PRINTING LINE: • Manufacturer: OLBRICH • Year of production and year of putting into operation – 2006. • Mechanical speed – 5-150 м/min. • Production speed - 60-110 м/min. • Full power consumption of electricity - 409 kW/h • Effective power consumption of electricity - 290 kW/h • Temperature of heat transfer agent (oil)– 3000С • Pressure of compressed air - 6 atm • Printing line length – 58,3 м. • Printing lin ...

The line is designed for applying a six-color coating to the base with final packaging in consumer rolls. Non-woven or paper material can be used as a base, as well as other types of bases upon agreement with the manufacturer of the equipment. This equipment can produce the following groups of wallpaper: foamed vinyl in widths of 0.53 m and 1.06 m on paper and non-woven bases also paintable wallpaper. The line can be upgraded to produce an additional group of wallpapers – hot embossing (silkscreen printing). The manufacturing plant (Olbrich GmbH & Co, Germany) develops a project for installing a calender zone in this line upon individual request. GENERAL PARAMETERS OF PRINTING LINE: • Manufacturer: OLBRICH • Year of production and year of putting into operation – 2007. • Mechanical speed – 5-150 м/min. • Production speed - 60-110 м/min. • Effective power consump ...

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

MAZZONI LB toilet block production line. New 2007. The line consists of : 1. mixer PS-256.1 2. screw conveyor T-255.1 3. extruder PL-258.1 4. cutting device (twin-bladed slicer) PX 258.1 5. cutting machine (tracked single-feed slicer) PX 256.1 6. additional production line equipped with bag dust collector FW-PARTNER-2200/N 7. additional belt conveyor for transport of difficult raw material . 8. single-coil forming head. 9. double-coil forming head. 10. COREMA thermoregulator.

YARN PRODUCTION MACHINERY: 2X 2014 RIETER A11 UNIFLOC MACHINE 2X 2014 RIETER A48 HEAVY METAL SEPARATOR 2X 2014 RIETER B12 UNICLEAN 2X 2014 RIETER B76 UNIMIX 2X 2014 RIETER A79 UNISTOR 2X 2014 RIETER A21 CONDENSER 2X 2014 JOSSI MAGIC EYE 2X 2014 JOSSI TVS XSPECT 1X 2014 RIETER B25 WASTE OPENER 1X 2014 RIETER UNICONTROL 2X 2015 ARGEMA SMT 64500 14X 2014 RIETER C70 CARD MACHINE 4X 2016 RIETER C70 CARD MACHINE 6X 2014 RIETER SB-D 45 6X 2014 RIETER RSB-D 45 1X 2014 RIETER SPIDERWEB 10 X 2014 RIETER R60 Open End Spinning • Make : Rieter • Model : R60 • Year : 2014 • No of Rotors : 600 • Yarn Clearer Make : Rieter Q10 • Piecer Carriage : 4 • Opening Roller Type : B174 N-64 • Rotor Diameter in mm : 33 • Length Measuring : Available • Type of Spinbox : R60 • Type of Drum : SRZ • Conicity : Cylindrical • Rotor Drive Type : Aero - bearing � ...

Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. ...

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

longitudinal feed: X: 490 mm Vertical feed: Y: 320 mm cross travel: Z: 660 mm Swivel range: C: +/- 200 ° Control: HMC 500 WWM Walter lenght tool piece capture: A: 175 mm ISO 50 Max. rpm: A: 60 min/-1 centre height: 145 (190) mm max. workpiecediameter: 320 mm max. workpiece length: 320 (350) mm resolution: 0,0001 ° Resolution: 0,0001 mm Grinding spindle:: spindle diameter: 80 mm grinding wheel diameter: max. 200 mm Max. rpm: 0 - 7.000 min/-1 driving power - grinding spindle: 24 kW max. Torque: 6 Nm total power requirement: 35 kVA weight of the machine ca.: 4,65 t dimensions of the machine ca.: 3,6 x 2,5 x 2,95 m Documents: pallet loading station: CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production line is in good condition

Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.

We are offering for sale a complete soup production line that consists of: - Loos steam boiler System equipped with a white main burner, water softening system, and pressure equalization boiler. The unit has been regularly maintained and is fully ready for operation. - Lubeca autoclave The system has been regularly serviced and is operational. It is currently shut down, and its last inspection certificate (MOT) expired on July 25. - WB can washer The system is ready for operation. Year of Manufacture: 1984 - Filler + Can Sealer The system is ready for operation. The conveyor belts and the filler (no Type plate) are included. - Linx Inkjet Printer The printer is operational and has been used very little. Year of Manufacture: 2019 Model: 8900 IP55 - Hobart FUX dishwasher (steam-operated) The system is operational and regularly maintained. Upon request, the dosing system can ...

Battery Production Facility Manufacturer: Aumann Year: 2016 Condition: Used – good working condition 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14  ...

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Fritsch Condition: RENOVATED Made in Germany Description: This Fritsch Line includes: Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year

For sale: a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measuring system for automated quality control of optical components such as wafers, sensors or micro-optics., This machine was developed for the precise mass testing of optical components and offers the highest measurement accuracy, reliability, and flexibility in industrial applications. Its modular design allows the tester to be perfectly adapted to individual production or development requirements., Features & Equipment, • Integrated laser module (940 nm, circularly polarized) for precise optical illumination, • High-resolution camera with automatic calibration and large field of view, • Robot-based wafer handling (EFEM) for automated loading and unloading, • Analysis software for evaluating efficiency, contrast, uniformity, and performance, • CE certified, including ...

SMD Production Equipment for Sale Hybrid Pick-and-Place Machine - Model: HP-110/110 Ver 1.3 - Condition: Used - Included: Bambi air compressor Reflow Oven - Brand: Dima - Model: Breeze SMRO-0253/0503 Manual SMD Placement Machine - Brand: Dima SMT Systems - Included: JUN-AIR compressor Screen and Stencil Printer - Brand: EssemTec - Model: SP002 Find more here - / Contact us at -

The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...

This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine.

1.) Sumbel Herold 2.)Zechini Ottima 74 Roller press Year 2000 Size 74cm Roller pressing unit to press together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max material thickness: 3,5 mm. Dimensions: 96 x 85x 105h cm Net weight: 119 kg 3.) Schmedt Präkant 6201 Turning-in machine Schmedt Präkant 0601, good condition, cleaned and checked, max.size 600x600mm, min,150x150mm, max. board thikness 6mm, min.1,5mm.

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Drive chain, triplex chain, roller chain -Size: 24B-2 1 1/2 x 1 inches -Length: 1.25 m -Number: 13x chains available á 1.25 m -Price: per chain -Weight: 26 kg/piece

Drive chain, duplex chain, roller chain -Size: 28B-2 1 3/4 inches -Width: 125 mm -Length: 0.9 m -Price: per meter -Number: 3x chains available -Weight: 15 kg

Drive chain, duplex chain, roller chain -Size: 08B-2 1/2x5/16 inches -Length: 5 m -Price: per meter -Number: 3x packages available -Weight: 6.8 kg/piece

Drive chain, duplex chain, roller chain -Size: 08B-2 1/2x5/16 inch -Length: 5 m Price: per 5 meters -Weight: 7.5 kg

Drive chain, duplex chain, roller chain -Length: 3.048 m -Price: per meter -Number: 2 chains available -Weight: 5.9 kg

roller chain, drive chain, duplex chain -Manufacturer: Rexnord, drive chain duplex chain heavy version type R38-2 with 4 chain locks -Length: 4600 mm -Pitch: 38.1 mm / 1 1/2 Roll width 25.4 mm -Transport dimensions: 480/410/H120 mm -Weight: 78.8 kg

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. ED 24ST Series No. 00005266 Year of construction 2008Load capacity 240 kgHook travel 2.7 metersDistance suspension to load hook 950 mmLifting speed Lifting speed: 3 to 12.9 m/min. Mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety, stroke limit switch- emergency stopWeight 18.5 kgvery good condition; used

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 032190 Year of construction 2017Load capacity 240 kgHook travel 2 metersDistance to suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used