cfs gea used for sale

Control: SIEMENS table surface area: 160 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -small output shaft speeds: 1290 rpm -Diameter shaft: Ø 11 mm -Hollow shaft output shaft speeds: 91 rpm -Diameter shaft: Ø 19 mm -Power: 0.25 kW -Construction: angle hollow shaft -Protection class: IP 44 -Dimensions: 320/160/H180 mm -Weight: 14.5 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 109 rpm -Power: 3 kW -with brake: 24 V -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54 -Dimensions: 850/300/H300 mm -Weight: 91 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Pulley: Ø 170 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Dimensions: 430/250/H190 mm -Weight: 19.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 60 rpm -Power: 0.10 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Dimensions: 245/130/H110 mm -Weight: 3.8 kg

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: . mm gear width: . mm max. module: . min. module: . Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearbox, spur gear -Translation: 1:14 -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg

gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mounting: Inner Ø 42 mm -Dimensions: see photos -Overall dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 71 b4 -Gearbox: 21 rpm, with oil level indicator -Power: 0.37 kW -Voltage: 220/380 volts -Hollow shaft: Ø 24 x 100 mm -Protection class: IP54 -Brake: 380 v -Dimensions: 470/160 / H195 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Stöber, Gearbox type C002NO 105MQ10 -Translation: i 10,297 -Drive shaft: Ø 20 x 40 mm -Dimensions: see photo technical drawing -M2 perm: 43 Nm / n1= 3000 rpm -Dimensions: 240/140/H155 mm -Weight: 9.1 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

Due to new motorization, this Reintjes gearbox type WAF 763L with subzetsung 5.750: 1 half May 2026 is available The shooting hours is dan Umnabei 64.000

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 112 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 457/193/H155 mm -Weight: 18 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, geared motor -Type: R40 DT71D4 -Speed: 32 rpm -Power: 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Dimensions: 405/146/H213 mm -Weight: 15.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 224 rpm -Power: 0.55kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 460/190/H160 mm -Weight: 17,2 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor -Type: SA47T DT80K-4 -Speed: 36 rpm -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 55 -Dimensions: 425/200/H260 mm -Weight: 21 kg

max. wheel diameter: mm gear width: mm max. module: 0 min. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor type SK 0-63L74-016 Speed: 148 rpm -Power: 0.18 kW -Shaft: Ø 16 x 40 mm -Protection class: IP44 -Dimensions: 340/130/H170 mm -Weight: 9 kg

Geared motor, electric motor, electric geared motor -Manufacturer: ABI, Geared motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12 kW -Shaft: Ø 20 x 20 mm -Protection rating: IP55 -Dimensions: 310/165/H185 mm -Weight: 9.5 kg

Geared motor, electric motor, electric geared motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection rating: IP55 -Dimensions: 265/110/H155 mm -Weight: 4 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor type ZG2 KMR 80 K 4 -Speed: 80 rpm -Power: 1.1kW -Type: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimension: 500/200/H260 mm -Weight: 29 kg

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

The machine is in good technical condition, testing is possible by prior arrangement.

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMRE 71K 4 -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.5 Nm -Dimension: 530/200/H235 mm -Weight: 27 kg

Geared motor, electric motor, electric geared motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BPRE 71 K 4 -Speed: 40 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.4 Nm -Dimensions: 520/203/H235 mm -Weight: 26 kg

Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg

PFAUTER RS 00 - Gear hobbing machine -Max. wheel diameter 250mm -Max. tooth width 160mm -Max. module 2.5 - 3mm -Approx. 65 change wheels + built-in change wheels in the machine - Table diameter approx. 200mm -Milling cutter speeds 200 - 1200 rpm -Digital display -Tangential milling device -Interchangeable wheels -Documentation -Machine enclosure Dimensions: LxWxH 1.6x1x1.7 meters / Weight 1800 kg

Gear, cogs, spur gear -Gear: helical, 59 teeth -Diameter: Ø 344 mm -Tooth width: 80 mm -Dimensions: see photos -Total dimensions: Ø 344 x 467 mm -Weight: 78 kg

Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Milling head, upper head, mechanically switchable clutch, clutch gear, gear clutch -Clutch gear: Gear for mechanical clutch -Type: unfortunately no type designation -External: Ø 345 mm -Inside: Ø 223/218 mm -Width: Outside 53mm / Inside 70mm -Dimensions: see photos -Total dimensions: Ø 345 x 70 mm -Weight: 8.8 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: G12-10/DK 84-200L -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 65 -Brake: 5 Nm -Dimension: 570/235/H195 mm -Weight: 34 kg

Gear motor, electric motor, electric gear motor -Manufacturer: KEB, gear motor type G 3.2 C DA 71 G 4 -Speed: 20 rpm -Power: 0.37kw -Shaft: Ø 30 x 60 mm -Protection class: IP55 -Type: B5 -Dimensions: 435/160/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ASUG VEM, geared motor -Transmission: ASUG type GWWN 1052 -Engine: VEM type KMR 56 K 4 -Power: 0.12 kW / 1360 rpm -Protection class: IP44 -Total dimensions: 290/135/H185 mm -Weight: 10 kg

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type C30-63K/4DC -Speed: 106 rpm -Motor: 0.12 kW / 1340 rpm -Shaft: Ø 20 x 40 mm -Protection class: P33 -Total dimensions: 335/170/H170 mm -Weight: 11 kg

adjustable gearbox, variable speed gearbox, spindle gearbox -Manufacturer: PIV, variable speed transmission -Type KS 712 B3 -Shaft diameter: 19 x 28 mm -Shaft diameter: 19 x 40 mm -Individual components: see photos -Overall dimensions: 385/350/H310 mm -Weight: 38 kg

Geared motor, electric motor, three-phase motor, electric geared motor, offset geared motor -Manufacturer: Bauer, gear motor type BF10-04/D07LA4 -Speed: 43.5 rpm -Power: 0.37kw -Construction: B14 -Hollow ell: Ø 25 x 125 mm -Protection class: IP 65 -Dimensions: 370/270/H220 mm -Weight: 24 kg

Condition NEW Brand Siemens Type CAF38 AK90LP4 Voltage Volt 1 chamfer 230 volt Power KW 1500 watt 1,5 KW 111 Nm RPM 95 RPM speed Shaft size mm 25 mm Version Version 32 kilo Units in stock 10 Length 50.00cm Width 25.00cm Height 18.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Neri, gear motor -Gear: Speed: approx. 105 rpm -Engine: Type T63BN/4 -Power: 0.18 kW / 1400 rpm -Shaft: Ø 25 x 80 mm -Protection class: IP54 -Dimensions: 365/125/H165 mm -Weight: 8.1 kg.

Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg

Liebherr / Lorenz S800 Gear - Hobbing Machine -Max. workpiece length with counter holder 600mm -Max. workpiece length with retracted counter holder 800mm -Max. travel of the milling carriage 360mm -Largest millable pitch for the largest workpiece 5 Pi / in the normal power range 8 Pi -Pick-up taper - milling spindle MK 5 -Mandrel 22/27/32/40mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter displacement 80mm -Milling cutter speeds 40-220 rpm -Feeds infinitely variable / horizontal -Feeds infinitely variable / vertical -Feeds infinitely variable / tangential -Clamping table without water rim 550mm -Clamping table hole 100mm -Mandrel taper MK5 Accessories: 1x pallet interchangeable wheels 1x pallet hob 1x pallet clamping mandrels Documentation Machine feet Dimensions: LxWxH 3.6x1.8x1.9 meters / weight 5000Kg

Gears, spur gears, bevel gears, worm gears -Gear: bevel gear type E 080 B -Translation: i 24 : 1 -Shaft: Ø 12 x 25 mm -Hollow shaft: Ø 12 x 65 m -Dimensions: 140/60/H90 mm -Weight: 1.5 kg

Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Motor brake: Type IQ BFK458-10E -Wheel: Type 1537 -Dimensions: 300/270/H650 mm -Weight: 65kg

Farmer Type BG60-11/D11LA4 3 chamfer 400 volts 5.5 KW 58 RPM Shaft 50 mm L 75cm W 35cm H 35cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...