cfm impianti used for sale

Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0406 Payload: 200 kg Load capacity platform pull-out: 100 kg Platform dimensions: 1.34 x 0.76 m Platform extendable + 0.55 m Transport dimensions 1.34 m x 0.785 m Height: 2.07 m Railings folded down Height: 1.67 m Weight approx.: 790 Kg Working height: 6.5 m Platform height: 4.5m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 120 Ah integrated charger 24 V/ 15 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offers  ...

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0608LDN Payload: 230 kg Load capacity platform pull-out: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport dimensions 2.06 m x 0.99 m Height: 2,17m Railings folded down Height: 1.8 m Weight approx.: 1710 Kg Working height: 8.7 m Platform height: 6.7 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 300 Ah integrated charger 24 V/ 30 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with appropriate ramps with car trailer. Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquir ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0608 LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.28 m Handrails folded down Height:1.75 m Weight approx.: 2800 Kg Working height: 8 m Platform height: 6 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 10 / 12 / and 14m working height, with and without support. In addition, the machine is also available with bright non-marking chains. For further data please inquire. The machine can be viewed at our warehouse a ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0810LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.40 m Handrails folded down Height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 8 / 12 / and 14m working height, with and without support. In addition, the machine is also available with normal black chains. For further data please inquire. The machine can be viewed at our warehouse and tes ...

Off-road scissor lift - work platform with crawler chassis and automatic support. Type: CFPT 0810LDS Load capacity: 450 kg Load capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport Dimensions: 2.78 m x 1.58 m Height: 2.40 m Railing folded down height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Climbing ability up to: 30° Overload cut-off: Powered by battery 48 V / 210 Ah integrated charger 48 V/ 25 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and details on request. The machine is also available with 8 / 12 / and 14m working h ...

scissor lift; Off-road platform with crawler chassis Type: CFPT0608LDN Load capacity: 230 kg Load capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport Dimensions: 2.06 m x 0.99 m Height: 2,17m Railing folded down height: 1.8 m Weight approx.: 1710 Kg Working height: 8 m Platform height: 6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 300 Ah integrated charger 24 V/ 30 A German instruction manual included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with car trailer with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing i ...

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0815LDS Load capacity: 450 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.77 m x 1.50 m Height: 2.46 m Railing folded down Height: 1.87 m Weight approx.: 3253 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 30 % Drive via battery 8x6V / 240 Ah Integrated charger 48V/40 A Support with automatic level compensation. Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0710LDS Load capacity: 230Kg Lifting capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Extendable platform + 0.90 m Transport Dimensions 2.45 m x 1.01 m Height: 2.18 m Railing folded down Height: 1.83 m Weight approx.: 1940 Kg Working height: 8.7 m Platform height: 6.7 m Climbing ability up to: 25 % Drive via battery 24V / 260 Ah Integrated charger 24 V/ 36 A Support with automatic level compensation. non-marking chains German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA wil ...

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; Wheel-mounted work platform; lifting platform; Lifting platform with support Type: CFPT1218RTE Payload: 365 kg Lifting capacity platform extension: 140 kg Platform dimensions: 2.91 x 1.53 m Extendable platform + 1.44 m Transport dimensions 3.34 m x 1.79 m Height: 2.77 m Railing folded down Height: 2.11 m Weight approx.: 4900 Kg Working height: 14 m Platform height: 12 m Climbing ability up to: 35% Drive via battery 8x6V / 240 Ah Integrated charger 48V/35 A Support with automatic level compensation. Light Non Marking Tires German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in  ...

Industrial vacuum cleaners, vacuum cleaners, industrial vacuums, floor vacuums, safety industrial vacuums, filter bags, dust bags -Manufacturer: cfm, Antistatic safe bag system -Type: 8 40874 -Number: 17 dust bags included -Price: per piece -Packaged dimensions: 170/210/H80 mm -Weight: 0.2 kg/piece

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0405DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.35 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.15 m Railing folded down Height: 1.79 m Weight approx.: 990 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25 % Battery-powered 4x12V / 100 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade  ...

power capacity: - kW volt: max 400 V ampere: max 13,2 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0608DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.37 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.19 m Railing folded down Height: 1.83 m Weight approx.: 1260 Kg Working height: 7.6 m Platform height: 5.6 m Climbing ability up to: 25 % Powered by battery 4x12V / 115 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tr ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0808NP Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 0.81 m Extendable platform + 0.90 m Transport dimensions 2.48 m x 0.82 m Height: 2.36m Railing folded down Height: 2.00 m Weight approx.: 1970 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 25% Drive via battery 4x6V / 200 Ah Integrated charger 24 V/ 36 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade fair fr ...

scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT1012 Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport Dimensions 2.48 m x 1.21 m Height: 2.48 m Railing folded down Height: 1.92 m Weight approx.: 2932 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25% Drive via battery 4x6V / 240 Ah Integrated charger 24 V/ 36 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade fair from the Bauma location. The price refers to pick-up from the Munich location. The machines can be lo ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: SEW-Eurodrive, Servomotor Permanent Magnet Motor -Type: CFM71L/TF/RH1M/SM50 -Speed: 0 - 3000 rpm -Voltage: 400 V -Shaft: Ø 19 x 35 mm -Technical data: see photo of the type plate -Number: 3x servo motors available -Price: per piece -Dimensions: 350/117/H190 mm -Weight: 11.8 kg/pc.

sheet width: 2040 mm : 4 mm sheet thickness for stainless steel: 2 mm total power requirement: 7,5 kW rear stop: 750 mm weight of the machine ca.: 2600 kg dimensions: 2810 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity The data for this ad was created with ModulMWS - the software solution o ...

sheet width: 1350 mm : 3 mm sheet thickness for stainless steel: 1,5 mm rear stop: 600 mm total power requirement: 3 kW weight of the machine ca.: 1150 kg dimensions: 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity The data for this ad was created with ModulMWS - the software solution o ...

sheet width: 2550 mm : 4 mm sheet thickness for stainless steel: 2 mm rear stop: 750 mm total power requirement: 7,5 kW weight of the machine ca.: 3050 kg dimensions: 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Youtube video link: https://www.youtube.com/watch?v=pCuKwtBIQto&ab_channel ...

Steel construction, machine platform, used steel scaffolding Manufacturer: EHINGER IMPIANTI Dimensions approx. 4.8 x 4.6 x 8.7 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Steel platform with ladder, steel construction, machine platform, steel scaffolding used Manufacturer: EHINGER IMPIANTI Height to platform approx. 4.2 m + 1.1 m railing Pedestal 1.7 x 1.9 m Ladder with back protection Dimensions total approx. 1.7 x 2.7 x 5.3 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Can depalletizer TMG Impianti Type: PalPaq Model Vega 120 B capacity: approx. 50.000 cph year of manufacturing: 2014 total installed capacity: 13,5 kW, 37,5 A pressure compressed air system min./max.: 6-7 bar compressed air consumption: 330 Nl/min machine dimension: please see layout weight: approx. 6.900 kg for can sizes: Classic 330 ml: D.66,3 h.115 mm - can type: 211 / 202 Classic 500 ml: D.66,3 h.168 mm - can type: 211 / 202 Classic 568 ml: D.66,0 h.177 mm - can type: 211 / 202 Sleek 330 ml: D.58,1 h.145 mm - can type: 206,5 / 202 Sleek 355 ml: D.58.1 h.157 mm - can type: 206,5 / 202 Slim 150 ml: D.53,3 h.88 mm - can type: 202 / 200 Slim 200 ml: D.53.3 h. 111 mm - can type: 202 / 200 Slim 250 ml: D.53.3 h. 134 mm - can type: 202 / 200 pallet size: 1170 x 1240 mm

General SKU257X239 LocationBarneveld MakeC.G.C. Impianti Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume11630 Ltr. Motor9 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity11 630 l. Vessel sizesø 2200 x 3450 mm Dished bottomcheck ManholeDN 400 Top connectionscheck OutletDN 80 Max. temperature190 °C With propellor stirrer3-fold Motor9,0 kW (380 V, 1440 rpm) Speed mixing shaft55—110 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) General No.100 Year of construction2000 Floorspace2,70 x 2,70 m Total height4,55 m Weight3800 kgGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed ad ...

Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Qty. 1 Second-hand slitting line - dismantled Mfc.: Guida Impianti SpA Built: TBA Strip width: 20 - 650 mm Thickness: 0.20 - 3 mm Coil for 9400 kg Entry coil up to 5 ton Worked for Aluminium, LAF and Stainless Steel

diameter range 26 mm drawing speed 10 m/min diameter range - mild steel 26 mm diameter range - high tensile 24 mm capstan diameter 1300 mm

Used case packer APE INCA 2000 year 2004 The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Container Specifications The APE Impianti INCA 200 ...

Technical Specifications & Performance Data The Used Case Erector Ape 1994 is a robust secondary-packaging solution from APE Impianti, model Form 1200 HM. Designed to erect corrugated cases for downstream packing, it supports beverage and food applications where consistent case integrity is crucial for high uptime in a used bottling line or broader industrial packaging environment. Manufacturer: APE Impianti Model: Form 1200 HM Year of manufacture: 1994 Category: Case Erector (secondary packaging) Closure system: Configured for hot-melt adhesive sealing (per HM designation); tape or other options subject to configuration Operational status: In storage; manuals available for setup, operation, and maintenance Typical application: Case forming for packing PET bottles, glass bottles, aluminum cans, or mixed formats for water, juice, beer, wine, and other beverages Throughput: Format- and mat ...

Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 –  ...

Used complete line for still wine - 8000 BPH Technical Specifications & Performance Data Runs at 8,000 bottles/hour on 0.75 L glass with straight-cork (flush-to-mouth) closure. The layout centers on a filling monoblock (2002) combining rinser, filler, and capper, followed by a capsuling/shrink unit (2002), Kosme labeling, and APE Impianti case handling. Built as wine bottling machinery for still wine, the configuration supports consistent fill levels, reliable sealing, and integrated downstream packing. Production speed: 8,000 bottles per hour Filling Monoblock: Model 36/1440.40/1440LV.6/360 RSX (Year 2002) – Rinser, Filler, Capper Capping System: Straight cork (flush-to-mouth) Capsuling/Shrinkage: Model POKER Z 6/8 (Year 2002) Compatible formats: Typical case pack pattern 12 x 0.75 L; additional formats with change parts Containers: Glass bottle handling (cylindrical containers) Label ...

Overview This 5 hl brewhouse was manufactured in 2016 by easybräu. The brewhouse consists of 2 vessels and is designed for beer brewing. It is currently still installed and can be visited at any time. The system is electrically heated; steam heating is possible. Valves are manually operated. The brewhouse is being sold because a larger system has been purchased. The brewhouse is immediately available and can be seen in person upon request. Technical data  Capacity: 5 hl Configuration: 2‑vessel brewhouse, manually operated valves Heating: Electric (steam possible) Temperature control: Yes Recipe management: Recipe storage available Utilities: Electric power (steam optional)

Used Used filling monoblock Mb Impianti 24.24.1: Year: 2011 Condition: As Is Filling Monoblock Mb Impianti Year: 2011 Speed: 2.800 Bph Direction: Clockwise Rinser: Number of clamps: 24 Fixed Nozzle Single treatment Isobaric filler Number of filling valves: 24 Type of valves: electropneumatic Function: pre-evacuation self-leveling De-gassing Various filling functions adjustable from PLC Single Head Capper Type of heads: swivel turret Workable Caps: Natural straight cork | Mushroom Cork Screw cap 30?60 Crown cap 29 mm Empty before capping Bottle formats: ? 66-80-85-100 Safety protections Code: QT 631 More details: https://bottlingscout.com

Auction-ID: A3-46142-21310

VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, 60 mm screen (or bespoke), control panel, good working conditions, Constructed in 11-2001, Users manual, electrical drawings, CE compliance., offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: May 2026, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric

Auction-ID: A1-51172-138