cf 150 used for sale

Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm

bore capacity in steel (diameter):50-60 mm arm length:1.600 mm weight of the machine ca.:5-7 t spindle taper MT:wahrscheinlich MK5

max. wheel diameter: 1500 mm gear width: 550 mm max. module: 25 min. module: 2 workpiece weight max.: 6000 kg max. number of teeth: 432 min. number of teeth: 12 table diameter: 990 mm grinding wheel size: 400 mm total power requirement: 75 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: m With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine name: Passavant 1500 Manufacturer: Passavant Type: 1500 Year of Make: 1977 Design: Bridge spar press Filter pressure: 15 bar Press capacity: 3,000 liters Expiration:Closed Filter area: 215 m2 Plate format: 1500 x1500 mm Number of plates: 60 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloths: No Filter Cloth Washer: Yes Panel package length: 4,400 mm Cake thickness: 30 mm Closing pressure: approx. 400 bar Dimensions: L 8,300 x W 1,950 (2,400) x H 2,930 (700) mm Accessories: A hydraulic system, a light barrier, a filter cloth washer Condition: Used Price: On request

240kg/batch Used and functional We are also happy to offer overhaul, transport, installation and training. For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Search Terms: Roaster, Coffee, Drum Roaster, Drum, Green Coffee, Roasted Coffee, Roasting Machine, Coffee Roasting Machine, Probat

sheet width: 1550 mm plate length: 2525 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/mih no. of strokes: 200 / 400 Hub/min control: MNC 32000 ATC: 22 Pos total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm turning length: 1500 mm control: C200 T turning diameter over slide rest: 425 mm spindle passage: 100 mm Tool changer: live tooling: turning speeds: 10-2800 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: tail stock: c-axis: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mm turning length: 1600 mm control: Siemens 810 T turning diameter over slide rest: 320 mm spindle passage: 85 mm Tool changer: turning speeds: 12,5-4000 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: 170 mm tail stock: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: PERKINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 198 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/perkins-1506a-e88tag1-new/ 290, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1506A-E88TAG1; Transport weight [kg]: 920

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Manufacturer Mathis Year of construction 2005 Roller applicator BA RRC 15004” Infrared dryer IR 5104” Find more here - / Contact us at -

Qty. 1 Second-hand slitting line for stainless steel – in storage Mfc.: SACMA Overhauled by CAMU Built: 1992 Dismantled: 2024 Coil weight: max. 27,000 kg at uncoiler, 10,000 kg at recoiler Coil internal diameter: 500 mm Speed: max. 140 m/min Double mandrel with centering side 2 cutting heads / shears with 180 mm diameter shafts New sheet metal tensioner Complete set of blades for stainless steel Ribbon turner on rail complete with scale Scrap baler

Industrial scale IFB 150K20DLM, weighing range 60 kg; 150 kg, readability 20 g; 50 g Mounted on trolleys Heavy-duty industry standard suitable for harsh use Platform: Stainless steel weighing plate, painted steel substructure, silicone-coated aluminium load cell, IP65 dust and splash water protection Large, backlit LCD display, digit height 52 mm Dimensions weighing plate, stainless steel W×D×H 650×500×142 mm Dimensions Evaluation Device W×D×H 250×160×58 mm

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

turning diameter: 500 mm turning length: 1500 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

x-travel: 1500 mm y-travel: 800 mm z-travel: 700 mm table surface area: 1760 x 700 mm spindle taper: SK 40 spindle turning speed - stepless: 8000 U/min spindle drive: 15 kW feeds: 1 - 8000 mm/min rapid traverse X/Y/Z axis: 15 / 15 / 12 m/min table load: max. 2500 kg spindle throat: 760 mm ATC: 40 Pos control: HEIDENHAIN, TNC 530 total power requirement: kW weight of the machine ca.: 12,5 t dimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included - The data for this ad was created with ModulMWS - the software so ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmWeight approx.3000 KgDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

grinding diameter: max. 320 mm grinding length: 1.500 mm centre height: 160 mm Control: Touch Jones & Shipman between centers: max. 100 kg table:: Traverse Z-Axis: 1.645 mm traversing speed: 0,0001 - 12 m/min swivable: +5 / -5 ° x-axis:: Traverse X-Axis: 260 mm traversing speed: 0,0001 - 6 m/min grinding head:: grinding wheel motor: 7,5 kW cutting speed: 45 m/s Grinding wheel Ø x width x bore: 450 x 50 x 203,2 mm Tailstock:: Swivel range: -15 / +90 ° turning speed range: 0 - 660 U/min Torque: 27 Nm tool adaptor: MK 3 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,0 m paper band filter: magnetic separator for cooling water: Coolantsystem: Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) -  ...

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Gornati Legoor 300 Ø 600 x 1500 mm Distance between centers: 1500 mm Swing over bed: 600 mm Swing over cross-slide: 370 mm Swing in gap: 900 mm (440 mm long) Diametre of main spindle bore: 108 mm Power on main spindle: 15 hp Number of speeds: 20 > 1500 rpm

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

SNA-10. 2 Emergency Power Systems - Complete System Manufacturer: Heinkel Aggregatebau GmbH Technical Data: - Heinkel SET HE500/396; 500 kW; 400 V; 722 A; 1500 rpm - IP 20, brushless synchronous machine AEG Rotaduct - 2 units Type DKBH4407/04; 3-phase AC; 280 kW; 400 V/404 A, 50Hz - 1500 rpm; 50Hz; cos φ 0.8; Built: 1991 - Diesel generator by MTU, Diesel tank: 1 unit, capacity: 1425 l - Starter battery; 2 units Hoppeke power HC 125300 - Dry cooler by Alfa Laval; 2 × 6 fans; 793.52 kW; each 50 m³/h - Ventilator: 90460 m³/h; Two-circuit cooler; Rooftop installation Find more here - / Contact us at -

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Manufacturer: Paul, Type: Sägewelle K 1500, Diameter saw spindle mm: 100, Cutting width max mm: 1500,

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

pressure: 150 t chamfer lenght: 4300 mm distance between columns: 3700 mm ram stroke speed: 100 mm/sec working feed: 8 mm/sec return speed: 80 mm/sec stroke: 175 mm table height: 920 mm Control: DELEM DA 52 total power requirement: 11 kW weight of the machine ca.: 15000 kg dimensions of the machine ca.: 4800 x 1700 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8281 Type: KTVF 55x3/1500 Producer: BC ECO TECH Created: 2010 Parameters: Capacity: 200 kg/h Maximum number of film layers: 3

Manufacturer: Böhl Wickelautomat , Type: SV 1500, Year: 1993, Control: Siemens S 5, Work piece width min-max mm: 300-1200 , Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 20-900, Belt conveyor: yes, Aligning station: no, Width:165 to 250 mm: yes, Min-max roller diameter mm: 250, Automatic product recording: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: ca 1500, Feed out belt L x W x H mm: ca.1500, Foot switch: Handschalter, Year :1993

Fanuc A06B-0505-B071 #7000 20S/1500

Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Features: Nominal / outside width in mm: 700 scope of delivery: including supports without side guides, inklusive Frequenzumrichter, inklusive Lichtschranken Conveying length ...

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

Sales are made on behalf of the customer

Used stainless steel egalizer, capacity: 1500 liters.

Continuous Butter Churn Westfalia Make : Westfalia Model : BUC 1500 Capacity : 1500 Kg per hour Cream Tank included Controls : VFD Drives , Touch Screen PLC Plate Heat Exchanger Water Valves , PHE, Control panel Butter milk Tank Main Control Panel Condition : Excellent Location : DAIRY MACHINERY UK

Key data: 3000 m³/h, 7 kW

Filter capacity: 3000 m3/h Filter area: 52.5 m2 Filtering and suction of: -Smoke -Dust -Laser Motor power: 7.5 kW Country of origin: Germany Weight: 1100 kg

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Key data: 400 mm, 1500 mm

Control Siemens ... Simatic OP17 Max. grinding diameter ... 400mm Max. sanding length ... 1500mm Max. workpiece weight ... 500kg Internal grinding Machine weight ... 9200kg L x W x H ... 6220x2760x1950mm The machine is in good condition, possible to test under power.

Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000

Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible.

A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.

Dimensions (L/W/H): 10460,0 × 5715,0 × 5537 mm spindle head adjustment: horizontal 3160 mm spindle head adjustment: vertikal 1000 mm hobbing length: 2250 mm weight of the machine ca.: ca. 76660 kg t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.