centerless grinder used for sale

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 30 mm Max. workpiece length for infeed grinding: 0.5 - 40 mm Grinding wheel: diameter new wheel: 400 mm Width: 125 mm Bore: 203.2 mm Speeds: number (steps): 2 from: 850 rpm up to: 1700 rpm Peripheral speed: 16 / 32 m/s Regulating spindle: diameter new wheel: 225 mm Width: 125 mm Bore: 80 mm Speeds: stepless from: 0 rpm up to: 120 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 1800 mm

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS 840 D Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 40 mm Max. workpiece length for infeed grinding: 95 mm Grinding wheel: diameter new wheel: 400 mm diameter used wheel: 300 mm Width: 110 mm Bore: 203.2 mm Speed with new grinding wheel: 2353 rpm Speed with abraded grinding wheel: 3183 rpm Peripheral speed: 50 m/s Regulating spindle: diameter new wheel: 305 mm diameter used wheel: 220 mm Width: 20 mm Swivelling range: -6 ° Speeds: stepless from: 0 rpm up to: 140 rpm Dressing speed: 250 rpm Voltage 50 Hz 3x: 400 Volt Air connect: 5 bar Total power required: 20 kW Machine´s weight about: 2600 kg Overall dimensions machine: Length: 3456 mm Width: 2960 mm Height: 2235 mm Various accessories:

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 2 mm Max. grinding diameter: 100 mm Width of the grinding wheel: 200 mm Grinding wheel: diameter new wheel: 600 mm diameter used wheel: 400 mm Width: 200 mm Bore: 304.8 mm Speeds: from: 22.5 m/s up to: 45 m/s Regulating spindle: diameter new wheel: 300 mm diameter used wheel: 180/210 mm Width: 200 mm Bore: 127/152 mm Speeds: stepless from: 10 rpm up to: 100 rpm Voltage 50 Hz 3x: 380 Volt Main motor: 18.5 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 2500 mm Width: 2100 mm Height: 2200 mm Various accessories: Coolant system

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 30 mm Max. workpiece length for infeed grinding: 0.5 - 40 mm Grinding wheel: diameter new wheel: 400 mm Width: 125 mm Bore: 203.2 mm Speeds: number (steps): 2 from: 850 rpm up to: 1700 rpm Peripheral speed: 16 / 32 m/s Regulating spindle: diameter new wheel: 225 mm Width: 125 mm Bore: 80 mm Speeds: stepless from: 0 rpm up to: 120 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 1800 mm Various accessories: Touch screen Coolant system Set of flanges Wheel trueing attachment Full splash cabin

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.1 mm Max. grinding diameter: 10 mm Width of the grinding wheel: 50 mm Grinding wheel: diameter new wheel: 150 mm Width: 50 mm Bore: 50 mm Speeds: up to: 6000 rpm Regulating spindle: diameter new wheel: 100 mm Width: 50 mm Bore: 40 mm Speeds: stepless from: 15 rpm up to: 150 rpm Main motor: 2.0 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 1600 mm

Grinding diameter maximum: 100 mm Grinding diameter minimum: 1 mm Grinding wheel diameter: 400 mm Grinding wheel width: 0 mm MACH-id     5461 MAKE          Herminghausen TYPE            SR-3 YOP              1974 SPECIFICATIONS Grinding Ø     1 - 100 mm Grinding stone dimensions      400 x 180 x 203 mm Grinding stone speeds        1500 Rpm DIMENSIONS Length        2500 mm Width          2000 mm Height          1800 mm Weight          3500 kg

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 1.5 mm Max. grinding diameter: 100 mm Width of the grinding wheel: 200 mm Max. workpiece length for infeed grinding: 200 mm Grinding wheel: diameter new wheel: 406 mm Width: 200 mm Bore: 203 mm Regulating spindle: diameter new wheel: 270 mm Width: 200 mm Bore: 140 mm Speeds: stepless from: 10 rpm up to: 250 rpm Voltage 50 Hz 3x: 380 Volt Main motor: 15 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 2020 mm Width: 1300 mm Height: 1420 mm Various accessories: Touch screen Set of flanges Grinding wheel Vibrating / oscillating conveyor Full splash cabin

Technical data Max. grinding diameter: 80 mm Grinding wheel: diameter new wheel: 400 mm Width: 200 mm Bore: 203.2 mm Regulating spindle: diameter new wheel: 250 mm Width: 200 mm Bore: 127 mm Speeds: from: 10 rpm up to: 200 rpm Voltage 50 Hz 3x: 220 Volt Main motor: 11 kW Regulating wheel motor: 1.1 kW Machine´s weight about: 3000 kg Overall dimensions machine: Length: 2400 mm Width: 2550 mm Height: 1700 mm Various accessories: Coolant system

Technical data Min. grinding diameter: 2 mm Max. grinding diameter: 85 mm Grinding wheel: diameter new wheel: 350 mm Width: 120 mm Bore: 200 mm Speeds: up to: 1800 rpm Regulating spindle: diameter new wheel: 250 mm Width: 120 mm Bore: 150 mm Speeds: from: 18 rpm up to: 250 rpm Voltage 50 Hz 3x: 380 Volt Main motor: 10 HP Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm Various accessories: Set of supporting templades Lamp Balancing attachment: Gt Elettronica VM 23 Wheel trueing attachment: 2 x

Technical data Min. grinding diameter: 2 mm Max. grinding diameter: 85 mm Width of the grinding wheel: 120 mm Grinding wheel: diameter new wheel: 350 mm Width: 120 mm Bore: 200 mm Speeds: number (steps): 1 up to: 30 m/s from: 1650 rpm Regulating spindle: diameter new wheel: 250 mm Width: 120 mm Bore: 150 mm Speeds: from: 20 , 30 rpm up to: 40, (320) rpm Voltage 50 Hz 3x: 380 Volt Total power required: 10 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 2000 mm Width: 1200 mm Height: 1700 mm

Grinding diameter maximum: 65 mm Grinding diameter minimum: 1 mm Grinding wheel diameter: 400 mm Grinding wheel width: 0 mm MACH-id    5462 MAKE        Herminghausen TYPE          SR 26 YOP            60 er SPECIFICATIONS Grinding stone dimensions      400 x 180 x 203 mm Grinding stone speeds         1500 Rpm DIMENSIONS Length         2400 mm Width           2100 mm Height          2000 mm Weight          3500 kg

Grinding diameter maximum: 330 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm SPECIFICATIONS Cylindical / Surface / Other   Swing head grinder Grinding diameter Ø   330 mm X - Travel   680 mm Y - Travel   300 mm Grinding wheel size   330 mm kW power on spindle  1,75 kW Spindle speeds / ranges  1400 Rpm DIMENSIONS Length   1100 mm Width  1400 mm Height  1700 mm  

grinding diameter max.: 30 mm regulating wheel width: 12 mm max. width of grinding wheel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centerless cylindrical grinding machine make NOMOCO type VSR 3-120Machine no. 449 built in 1990Technical specifications:WORKSPACE:max.grinding length (for plunge-cut grinding): 120 mmMin / max grinding diameter: 1-50 mmGrinding spindle tool holder cone: 10Workpiece spindle swiveling: + - 5 °max.grinding wheel dimensions: 300x120x127 mmmax.regulating wheel dimensions: 250x120x127 mmSpindle speeds in: 1 / minVS: 20 m / secDrive power 380 V 50 Hz: 5.5 kWSpeed: 1500 rpm.External dimensions: 2.0x2.0x1.5 mWeight approx: 2500 kgNew price approx DM 350-400,000, -used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Centerless circular and polishing grinding machine make LÖSER type RPS 374Year of construction 1990Technical specifications:Grinding range: 6 - 80 mmBelt dimensions: 2500 x 150 mmFeed speed: 0 - 10 m / min.Max workpiece weightDiameter range up to 80 mm approx.: 10 - 15 kgNumber of grinding stations: 2Drive power per grinding station: 5.5 kWWith- Supply and discharge- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Centerless (centerless) cylindrical grinding machine make MAGNAGHI MilanoFabr. -No: 20600, built in 11/1969Grinding length: 130 mmGrinding wheel diameter: 340 mmGrinding wheel width: 120 mmMax. Grinding diameter: 85 mm4 speeds: 18, 24, 34, 250 rpm,Delivery via hand leverExternal dimensions: 1600 x 1200 x 1200 mm highWith- Hydraulics in the machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Centerless cylindrical grinding machine make KÖBAU KÖNIG & BAUER type MultimatFabr. -No: 491889, WA3480Grinding wheel size: 400 x 100 mmRegulator pulley diameter x width: 300 x 100 mm11 speed of the regulating wheel: 10 - 90 rpmDrive power: 15.5 kWDimensions L x W x H: 2000 x 1700 x 1670 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tschudin EcoLine 400 Centerless grinding machine 2 pieces Staubli robot Machine is like new condition

grinding diameter max.: 130 mm regulating wheel width: 250 mm max. width of grinding wheel: 250 mm Control: Siemens Sinumerik 3 total power requirement: 35 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: m max.workpiece length for plunge-cut grinding 250 mm max.workpiece length for throughfeed grinding 300 mm grinding wheel size: diam. x width 600 x 250 mm regulating wheel size: diam. x width 350 x 250 mm grinding speed 35 / 45 / 60 m/sec. regulating wheel speed stfl. 8- 100 rpm (360 rpm) control wheel slide swivels + 2 to - 7° grinding wheel drive 22 kW total drive 35 kW equipped with: - Standard version with double bearing mounted grinding spindle and control spindle. - SIEMENS CNC control type Sinumerik 3 for control of all feeds, speeds and dressing programs. For rapid traverse approach, roughing, finishing, fine finishing and spark out, all feed and time  ...

There are two Nomoco M100 available, operational hours counter: 55,998h, with instruction manual, machine 1 is functional, but on machine 2 the control system has lost machine-specific programms/data that must be reloaded.

There are two Tschudin ESO 300 available, grinding disk dimensions: 300x125x140mm, grinding spindle rotational speed: 1050/2100/min, weight: 1.9t, with documentation.

Control: Siemens type 840D, shift utilisation: 3 shifts. Grinding disc diameter: 610mm, max. speed: 50m/s, weight: 8000kg, year of manufacture: 2009. Filter system: RESY Filtration, System: 68/500-LA-8-0, Year of manufacture: 2017, Capacity: 8000l. Accessories: Shaker, conveyor belt.

Description: Serial number 1338/86 weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 1,400 mm

Description: Serial number 74056 , Including accessories and spare parts weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,600 x 1,700 mm

Grinder Rex vinkl

Technische Daten: - max. Arbeitsbreite 4000 mm - Linearführungen in X-Achse - automatischer Arbeitsablauf X-Achse - automatische Verstellung der Z-Achse - Magnetspanntisch 2 x 2050 mm x 200 mm - Schleifwinkel Verstellung +/- 90C - Drehzahl Schleifscheibe 1440 U/min - Schleifscheiben FI 205 x 115 x FI 145 mm - Vorschubgeschwindigkeit 0 - 12 m/min stufenlos einstellbar mit Frequenzumformer - Motor 5,5 kW / 400 V - Motor Vorschub 0,75 kW - Motor Kühlmittelpumpe 90 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=5630, B=850 mm, H=1700 - Gewicht 2500 kg

Technische Daten: - max. Arbeitsbreite 1000 mm - automatischer Arbeitsablauf in X-Achse mit THK - Linearführungen und Staubstutz - manuelle Verstellung der Z-Achse - Magnetspanntisch 140 x 1000 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2840 U/min - Schleifscheiben FI 125 x 50 x 32 mm - Vorschubgeschwindigkeit 9 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=1500, B=700 mm, H=1600 - Gewicht 900 kg

Technische Daten: - max. Arbeitsbreite 1000 mm - automatischer Arbeitsablauf in X-Achse mit THK - Linearführungen und Staubstutz - automatische Verstellung der Z-Achse - Magnetspanntisch 140 x 1000 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2840 U/min - Schleifscheiben FI 125 x 50 x 32 mm - Vorschubgeschwindigkeit 3 - 9 m/min stufenlos einstellbar mit Frequenzumformer - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=1500, B=700 mm, H=1600 - Gewicht 900 kg

Technische Daten: - max. Arbeitsbreite 1500 mm - automatischer Arbeitsablauf in X-Achse mit THK - Linearführungen und Staubstutz - manuelle Verstellung der Z-Achse - Magnetspanntisch 140 x 1500 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2800 U/min - Schleifscheiben FI 125 x 50 x 32 mm - Vorschubgeschwindigkeit 3 - 9 m/min stufenlos einstellbar mit Frequenzumformer - Motor 2,2 kW / 400 V - Motor Vorschub 120W - Motor Kühlmittelpumpe 90 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=2450, B=820 mm, H=1380 - Gewicht 1500 kg

Technische Daten: - max. Arbeitsbreite 1500 mm - automatischer Arbeitsablauf in X-Achse mit THK - Linearführungen und Staubstutz - automatische Verstellung der Z-Achse - Magnetspanntisch 140 x 1500 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2800 U/min - Schleifscheiben FI 125 x 50 x 32 mm - Vorschubgeschwindigkeit 3 - 9 m/min stufenlos einstellbar mit Frequenzumformer - Motor 2,2 kW / 400 V - Motor Vorschub 120W - Motor Kühlmittelpumpe 90 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=2450, B=820 mm, H=1380 - Gewicht 1500 kg

Technische Daten: - max. Arbeitsbreite 1700 mm  - automatischer Arbeitsablauf X-Achse  - automatische Verstellung der Z-Achse  - Magnetspanntisch 200 x 1700 mm  - Schleifwinkel +/- 90C  - Drehzahl Schleifscheibe 1440 U/min  - Schleifscheiben FI 200 x 100 x 100 mm  - Vorschubgeschwindigkeit 3 - 9 m/min  stufenlos einstellbar mit Frequenzumformer  - Motor 5,5 kW / 400 V  - Motor Vorschub 0,75 kW  - Motor Kühlmittelpumpe 90 W  - Kühlmitteleinrichtung von oben mittels Kunststoffgelenkschlauch  verhindert ein Überhitzen der Messer  - Halogenlampe mit verstellbarer Halterung  - Abmessungen L=3120, B=1100 mm, H=1600  - Gewicht 2000 kg

Technische Daten: - max. Arbeitsbreite 3000 mm - automatischer Arbeitsablauf X-Achse - automatische Verstellung der Z-Achse - Magnetspanntisch 200 x 3100 mm - Schleifwinkel Verstellung +/- 90C - Drehzahl Schleifscheibe 1440 U/min - Schleifscheiben FI 200 x 100 x 100 mm - Vorschubgeschwindigkeit 3 - 9 m/min stufenlos einstellbar mit Frequenzumformer - Motor 7,5 kW / 400 V - Motor Vorschub 0,75 kW - Motor Kühlmittelpumpe 90 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=3700, B=1100 mm, H=1600 - Gewicht 2500 kg

Technische Daten: - max. Arbeitsbreite 800 mm - automatischer Arbeitsablauf in X-Achse - Linearführungen in X-Achse mit Staubstutz - manuelle Verstellung der Z-Achse - Magnetspanntisch 120 x 820 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2800 U/min - Schleifscheiben FI 150 x 60 x 32 mm - Vorschubgeschwindigkeit 0-10 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Gleitmittelpumpe mit Zentralschmierung - Abmessungen L=1700, B=900 mm, H=1350 - Gewicht 300 kg

Technische Daten: - max. Arbeitsbreite 1000 mm - automatischer Arbeitsablauf - Schleifwinkel 0C - 90C - Drehzahl 2830 U/min - Schleifscheiben FI 125 x 32 x 45 mm - Vorschubgeschwindigkeit 5 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 0,1 kW - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=1300, B=680, H=1580 mm - Gewicht 400 kg

Technische Daten: - max. Arbeitsbreite 700 mm - automatischer Arbeitsablauf - Schleifwinkel 0C - 90C - Drehzahl 2830 U/min - Schleifscheiben FI 125 x 32 x 45 mm - Vorschubgeschwindigkeit 5 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 0,1 kW - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Abmessungen L=1130, B=500, H=1250 mm - Gewicht 300 kg

Mixing Grinder 160 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 10.000 kg/h 2-speed working worm Main motor power: 25 KW / 35 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 230 Length: 170 Height: 220 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless 1-speed mixing paddle motor, approx. 1.5 kw with 2 mixing arms, independent of working worm, with automatic drive Elongated feet for higher outlet for loading trolleys Integrated lifting device, for standard meat bins Delivery time: 30 working days after advanced payment

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Petroncini grinder with a capacity of more than 200 kg per hour Was stored and not used for many years Unknown year Unknown condition Make your offer Can be refurbished as new with extra costs Type "The roasters agency" in the search bar to see other listings

Surface grinding machine

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Length: 380 mm Width: 200 mm Height: 134 mm Permanent magnet clamping plate Clamping range: 110 x 70

Grinder Seydelmann 160 mm Power: 35 kW Dimensions: 230x170x220cm

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Stone Disc Grinder is especially preferred by high-capacity coffee makers, spice makers and it is used for grinding Turkish coffee and also Black Pepper, Allspice, Cumin, Salt and Feed Grain. Capacity 75 kg/h.

Cylindrical mill. Two pairs of rolls, chilled water. Up to 1000 kg/h. After renovation.