We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,840 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
: neu : ca. 6 Monate ab Auftragse : Bulgarien : 55600 € : 1112 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 3 : 16 - 63, 63 - 250, 315 - U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 060 - 1/4 Gänge/ : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm ...
new
: neu : ca. 6 Monate ab Auftragse : Bulgarien : 23160 € : 472.46 € : 400 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,- The data for this ad was created with ModulMWS ...
new
: neu : ca. 6 Monate ab Auftragse : Bulgarien : 37580 € : 759.12 € : 400 mm : 750 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 4 : 18-98, 48-265, 144-790, 3 U/Min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 7.5 kW : 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning ...
used
Huron EX10C 5-axis machining center Year 2001 Coolant 60 Bar Vibration sensor Blum laser probe x y z 1200 x 700 x 800mm
used
Vertical Machining Center Manufacturer: Deckel Maho Model: 60 CNC: Heidenhain 426
used
5-axis machining center Manufacturer: Deckel Maho Model: DMU 70 V
used
Hartford Double Column Machining Center X Y Z : 2000x1500x800 BT50 Mitsubishi control unit 6000 rpm Hartford
used
Doosan DNM 650 II Vertical Machining Center Machine is in good condition
used
Makino A55e Horizontal Machining Center ::SPECIFICATIONS::: CNC Model: Makino CNC version: Professional 3 (Fanuc 16iM) Tool connection: HSK 63 Spindle power: 20Kw Number of spindle revolutions: 14000 Number of tools: 133 X Axis Stroke: 560mm Y-axis stroke: 560mm Z Axis Stroke: 600mm Rapid feeds linear axes X Y Z: 90m/min Guides: roller Pallet size: 400x400mm Pallet type: indexed Maximum load allowed: 500Kg High cooling pressure: yes Pressure value: 70bar System with external tank with filter: yes Chip evacuator: carpet Machine equipment: Marposs probe :::D IMENSIONS AND WEIGHT::: Length: 4800mm Width: 2200mm Height: 3000mm Weight: 9000Kg
used
Horizontal machining center Kafo HVC 500 :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i MB Tool connection: BT 50 Spindle power: 25Kw Number of spindle revolutions: 10000 Number of tools: 60 X Shaft Stroke: 720mm Y Axis Stroke: 650mm Z Axis Stroke: 650mm Rapid feeds linear axes X Y Z: 48m/min Pallet size: 500x500mm Pallet type: indexed Pallet degrees: 0.001 Maximum load allowed: 800Kg High cooling pressure: yes Pressure value: 20bar System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4035mm Width: 5170mm Height: 3000mm Weight: 13000Kg
used
Fadal VMC 6535 CNC Vertical Machining Center Machine is in good working condition Maximum spindle speed: 15.000 rpm X : 1700 mm Y : 890 mm Z : 1050 mm
used
Frontier MCV-1270 Vertical Machining Center X : 1250 mm Y : 700 mm Z : 600 mm Machine is like new condition
used
Awea AF-1060 Vertical Machining Center Working hour : 600-700( March 2024) Machine is like new X : 1060 mm Y : 650 mm Z : 650 mm Mitsubishi M80A
used
Deckel Maho MH1600 Vertical Machining Center X : 1600 mm Y : 800 mm Z : 800 mm 4000 rpm Maintenance has been done. Machine is in good working condition
used
Quaser MV154EL CNC Vertical Machining Center X : 1020 mm Y : 530 mm Z : 560 mm Machine can be seen in working condition
used
Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 360 mm Spindle speeds maximum: 10000 rpm Feed maximum: 10000 mm/min Positions ATC: 60 Positions APC: 2 CNC Brand: Fanuc CNC Model: Fanuc 16i MB 5 Axis machining center Loading FANUC Robot RARC mate 210iB Martin Mechanic workpiece product storage tower X - Travel: 700mm Y - Travel: 400mm Z - Travel: 360mm Table Ø: 1400mm Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Spindle Taper: Big PlusISO/Bt/Mk Power on ...
used
Spinner U630 5 axis Machining Center X : 630 mm Y : 530 mm Z : 465 mm
used
This Makino V55 Vertical Machining center was manufactured in the year 2001. It is equipped with a Fanuc Professional 3 control unit. The machine has a spindle speed of 20000 rpm.
used
Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...
used
This GENTIGER GT-1614 Vertical Machining center was manufactured in the year 2010. It is equipped with a HEIDENHAIN control unit.
used
CNC vertical machining center SIGMA Leader 5 - Control: iTNC 530 - Usable work surface 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - feed speed 40,000 mm/min -El. Handwheel - Heidenhain touch probe - Cooling by the spindle 30 bar -Aspirator - Tool measurement Renishaw (not used) - Rotary table Nikken Ø320 - Magazine with 50 seats FOR REPAIR or OVERHAUL - Motor spindle damage electrical - Control supply unit UV 101B approx. EUR 600,00
used
This Mazak VTC-200B Vertical Machining center was made in the year 2000. It is equipped with a Mazatrol PC-FUSION-CNC control unit.
used
This Mazak HCN-5000 Horizontal Machining center was manufactured in the year 2018. It is equipped with a Mazak Smooth G control unit. The machine has a spindle speed of 18000 rpm.
used
A machining center with a pallet changer from the manufacturer Emco Famup is offered here. The machine was used in the training sector and is therefore in very good condition. Manufacturer: Famup Emco Model: MCP 70-50 Year of construction: 2013 Control: Siemens Sinumerik 840D with PCU20 Specifications: Spindle power 35 kW/S6 (22.5 kW/S1) Speed: 50 - 12,000 rpm Torque: 120 Nm/s6 (76 Nm/s1) Tool holder: ISO 40 DIN 69871 Drum magazine 30 tool positions Travel distances: 700x500x640 mm Rapid traverse X-Y-Z: 40 m/min Clamping surface: 600x450mm Pallet changer Machine dimensions: 4000x2500x3000 mm Machine weight: 5500 kg Conveyor Coolant system Switch-on hours: approx. 22,000 h Spindle hours: approx. 11,000 h Working hours: approx. 9,800 h
used
This HERMLE C20U Vertical Machine Center was built in the year 2008. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.
used
This INTOS VOC 1000 Vertical Machining Center was made in the year 2003 in the Czech Republic. It is equipped with a Siemens control unit and has 3 axis. The machine has a spindle speed of 8000 rpm.
used
This MAZAK MTV655/60 Vertical Machining center was manufactured in the year 1996 in Japan. It is equipped with a MAZATROL M PLUS control unit. The machine has a spindle speed of 25 - 6000 rpm.
used
This FIDIA DIGIT 318 FH Vertical Machining center was manufactured in the year 2000. The machine has a spindle speed of 30000 rpm.
used
This Quaser MK603SP/12B Vertical Machining center was manufactured in the year 2011 in Taiwan. It is equipped with a Fanuc 18i-MB control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.
used
This HAAS TM 2 Vertical Machining center was manufactured in the year 2021. It is equipped with a HAAS control unit. The machine has a spindle speed of 4000 rpm.
used
CNC vertical machining center HERMLE C 42 V With path control Heidenhain iTNC 530 Year of construction: 2016 Travel : X 800 Y 800 Z 550 Speed range: 20 – 42,000 rpm continuously variable (HSK 40) With the following accessories: Rigid angle table 1050 mm x 805 mm clamping surface Vertical tool changer with 42 magazine slots ( HSK 40) Linear axis dynamics , remote maintenance Blow-off device Coolant equipment , Chip tray Manual cabin door , Manual cabin roof Polycarbonate safety glazing Electronic heat compensation iTNC 530 Electr. Manual operating module HR 410 BLUM Laser A1 rigid table , mod. BLUM A1 with optics BL 104 3 D touch probe Heidenhain Control cabinet cooling unit ( RITTAL) Status light 7-fold media connection rigid table 4 pieces of height-adjustable machine shoes Operating instructions THE MACHINE ONLY MILLED BRASS PARTS Absolutely MINT C ...
used
This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit.
used
This OKUMA MB-5000H Horizontal Machining center was manufactured in the year 2016 in Japan. It has 4 axis.
used
This MAZAK FJV-35/60 Vertical Machining center was manufactured in the year 2003. It is equipped with a MAZATROL PC-FUSION-CNC 640 M control unit. The machine has a spindle speed of 40-10000 rpm.
used
This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.
used
CNC Vertical Machining Center DECKEL-MAHO mod. DMC 70V Manufacturer: Deckel-Maho Type: DMC 70 V YOM: 1999 Number of axes: 3 Axes (X-Y-Z): 700x550x500 mm Spindle speed: 30,000 rev / min Spindle taper: HSK 50 Workpiece weight: 600 kg Tool table (load capacity): 900x550 mm Total power requirement: 10 / 15 kW Weight: approx 8.000 kg Dimensions: 3900x3700x3000 mm
used
This HURCO VMX 50 HS Vertical Machining center was made in 2002. It is equipped with a HURCO ULTIMAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
used
This HAAS VF-4 Vertical Machining center was manufactured in the year 2022 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 10000 rpm.
used
This Hurco VMX 50 S vertical machine center was manufactured in the year 2006 in Taiwan and has 44000 hours. It is equipped with a Hurco Ultimax control unit. It is equipped with Renishaw.
used
This Chiron FZ18KL Vertical Machining center was manufactured in the year 2002. It is equipped with a SIEMENS and has 3 axis. The machine has a spindle speed of 12000 rpm.
used
This RAPID MFC EVOLUTION II Universal Machining center was manufactured in the year 2009. It is equipped with a PC-controlled control unit. The machine has a spindle speed of 18000 rpm.
used
This HAAS TM2-HE vertical machine center was built in 2007. It is equipped with a Fanuc based control unit and has 3 axis. The machine has an SK 40 taper.
used
This KIA KV 35C Vertical Machining center was manufactured in the year 2006 in Japan. It is equipped with a Fanuc Series O-M control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
used
This Hermle U 630 T Vertical Machining center was made in 2002. It is equipped with a HEIDENHAIN TNC 426 control unit and has 3 axis. The machine has a spindle speed of 10-7000 rpm.
used
CNC machining center - X: 650 mm - Y: 510 mm - Z: 510 mm - Clamping surface: 800 x 450 mm - T-slots: size/number/distance 18/4/100 mmm - Table load: max. 400 kg - Working height: 760 mm - Spindle Ø: 65 mm - Speed range: 8000 rpm - Spindle power: 7/9.25 kW - Tool holder: SK 40 - WZ changer: 16-fold - Tool Ø max.: 80 mm - Tool length max.: 250 mm - Tool weight max.: 6 kg - Rapid traverse: 16000 m/min - Control: Siemens 802D - Machine weight: 3500 kg - Dimensions for space (W x D x H): 2.15 x 2.1 x 2.45 m - Condition: good Accessories Documentation, no other accessories
used
This TOYODA FH63S Horizontal Machining center was manufactured in the year 2002. It is equipped with a Fanuc Series 16i-M control unit. The machine has a spindle speed of 15000 rpm.
used
This MAZAK H400N Horizontal Machining center was manufactured in the year 1991 in the United Kingdom. The machine has 4 axis and a spindle speed of 10000 rpm.
used
This HURCO VM2 Vertical Machining center was manufactured in the year 2006. It is equipped with a Hurco MAX control control unit and has 3 axis. The machine has a spindle speed of 8000 rpm and a Tool Size DIN40.
used
This OKUMA MA-600HB Horizontal Machining Center was manufactured in the year 2006 in Japan. The machine has a spindle speed of 60-5000 rpm and has 4 axis.
used
This Makino F5 Vertical Machining center was manufactured in the year 2013 in Singapore. It is equipped with a Fanuc Series FS31i control unit. The machine has a spindle speed of 200-20000 rpm.