967 offers

Category: 901: tractors
New in: used
Price: request quote
Location: Land-at AT Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

last off Code: DL-367DR registration: 25.04.2014 elapsed. Hours of operation: 500,6 performance: 74, 9kW displacement: 4. 400ccm test badge: 4/2017 drive type: diesel maximum speed: Motornr.: Perkins 4-cylinder, turbo-diesel 4.4 l type, variant, version: T-L1/T1 003SP / - FIN: 10STG00495 equity / total weight: 3.843/6.000kg Facilities: 4 course, div. control panels, air conditioning, front and rear license Launcher, additional lighting, tray plateau, div. storage compartments, front hydraulic Lesnik PREDNJA HIDRAVLIKA SHL 24, year 2014, Powershiftgetriebe with load speed, power shuttle on the steering wheel is switchable, 32/32-speed transmission 3 DW rule hydraulic control units in the re ...

Category: 209: other wood working machines
New in: 2008
Price: 2.825 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Pneumatic table for whipping euro epal 80 x 120 pallets, allows for correct placement of nailed elements and precise nailing of nails in predetermined positions.

Category: 102: lathes
New in: 1994
Price: 15.000 €
Location: Land-ch CH 6331 Hünenberg, Bösch 67
Seller: HILGERT AG

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor  ...

Category: 207: gluespreader machines
New in: 2013
Price: used machinery auction RESALE 29.900 €
Location: Land-be BE Belgium, B-3900 Pelt
Seller: Surplex GmbH

Weight approx.: 3000 kg Dimensions (l x w x h) approx.: 6260 x 950 x 1750 mm gluing unit: Yes profile scraping unit: Yes Description: Brandt, type Ambition 1660 FC Airtech - Spread milling unit 2 x 2.2 kW, 200 Hz - Glue aggregate - Cutting unit phase / right 2 x 0.35 kW - Milling unit 2 x 0.55 kW Counterflow - Forming mill unit 4 x 0.3 kW WD 60 - Profile scraping with quick change heads - Cleaning unit 2 engines - Electronic control Power Control PC20 + - Extension walk-in ruler with 300 mm - PU rolls instead of standard rolls 1600 - 1800 - Interior lighting hood 3 lamps - Workpiece support shear version - Interface ligmatech zhr05 for 1600/1800 - Motor height adjustment top pressure - Progr ...

Category: 706: beverage machines
New in: 2001
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Automatic line for non-alcohol beer production from the normal filtered beer. Two identical plants to produce non-alcoholic beer from normal filtered beer by utilizing microfiltration production technology. The production lines were installed in year 2001 and they are still installed and in good operational condition. Beer is pumped through the microfilter under pressure, water and flavors pass through the microfilter, but alcohol molecules remain on the filter surface and then wash off with the water. After the water with alcohol goes to distillation column, where alcohol separates from the water. Water after separation returns back into the system for reuse. Both lines has original c ...

Category: 101: boring mills and machining centers
New in: 1990
Price: used machinery auction RESALE 3.200 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 4500 kg Dimensions (l x w x h) approx.: 2300 x 2400 x 2750 mm Description: Table size 900 x 410 mm, table load 300 kg, Displacements X / Y / Z 560/410/460 mm, Power supplies up to 12 m / min, rapid traverse 30 m / min, Spindle mounting DIN 69871-40 (SK40), speed 60-6000 rpm, 30 places in warehouse, control Mazatrol M 32

Category: 901: tractors
New in: used
Price: request quote
Location: Land-at AT Graz
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

read operating hours: 6.523 hours registration: 14.10.1986 FIN: 21592/0868 type, variant, version: 8060 4WD indicator: bra 80137 test badge: no test notice pursuant to § 57a, authorities are to take over power from the buyer: 35 kW displacement: 2,592 of CC drive type : Diesel equity / total weight: 2,760/3,800 kg color: grey equipment: seat 1, with top mounted signal light tyres: front 275/80-18, rear 14.9-28 documentation: licence of types of available key: 1 notes to the State: vehicle was as spare parts used paint largely bleached out, sticker residue, prov. Repainting were performed, heavily used rust all around vehicle, Interior, front axle, clutch heavily worn, motor leaki ...

Category: 101: boring mills and machining centers
New in: 2005
Price: used machinery auction RESALE 14.000 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 5500 kg Dimensions (l x w x h) approx.: 2000 x 2400 x 2450 mm Description: Max workpiece size ø 230 x 350 mm, table diameter 156 mm, (3-R System), maximum table weight 25 kg, displacement X / Y / Z 400/450/350 mm, B shaft Swivel table +/- 110 °, C axis table turning 360 °, feed and rapid traverse up to 40 m / min, spindle pick-up HSK E 40, Spindle speed 100-42000 rpm, 68 tool slots, Heidenhain iTNC 530 control

Category: 203: planing machines
New in: 2004
Price: request quote
Location: Land-pl PL 66415 KÅ‚odawa , Gorzowska 8
Seller: PPHU Lignum Przemysław Kretowicz

The DSNA coarse grinding machine is designed to demould the layer of wood on one side of the element in order to obtain a specific thickness and the corresponding surface roughness. To obtain straightness, the bottom surface of the element should be prepared on the planer. The thickness of the planed layer and the feed speed depend on the width of the planed element and the desired surface smoothness. The machine tool is designed only for working with central or individual sawdust extraction. Product description The compact body of the welded construction guarantees good work of the mechanisms placed in it. Top cover - openable enables quick and easy access to all points of adjus ...

Category: 101: boring mills and machining centers
New in: 2000
Price: used machinery auction RESALE 8.400 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 5200 x 3250 x 3200 mm Description: Table dimensions 2640 x 560 mm table load 2000 kg, Displacements X / Y / Z 2500/500/610 mm, with pendulum operation x = 2x 800 mm, Power supplies up to 15 m / min, rapid traverse 30 m / min, Spindle mounting DIN 69871-40 (SK40), speed 5300 rpm, 40 places in warehouse, control Mazatrol Siemens 840 C, High pressure cooling 45 Bar, Machine hours 33131h

Category: 1001: plants for concrete and precast technology
New in: used
Price: request quote
Location: Land-de DE 49808 Lingen, Marienstr. 6
Seller: EL-Maschinenbörse GmbH

1 used cement silo, capacity 38 cbm Diameter 2400 mm Total height 15.885 mm

Category: 101: boring mills and machining centers
New in: 1999
Price: used machinery auction RESALE 7.000 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 5200 x 3250 x 3200 mm Description: Table dimensions 2640 x 560 mm table load 2000 kg, Displacements X / Y / Z 2500/500/610 mm, with pendulum operation x = 2x 800 mm, Power supplies up to 15 m / min, rapid traverse 30 m / min, Spindle mounting DIN 69871-40 (SK40), speed 5300 rpm, 40 places in warehouse, control Mazatrol Siemens 840 C, High pressure cooling 45 Bar, Machine hours 35126h

Category: 112: gear cutting and hobbing machines
New in: 1983
Price: request quote
Location: Land-de DE 74626 Bretzfeld, Im Eisenhütle 6
Seller: Schraag Werkzeugmaschinen GmbH

with differential gear, Automatic shifting and tangential milling facility. Gr. Workpiece diameter. with/without Overarm 340/400 mm Gr. Module 6 mm Gr. Axial travel 275 mm Gr. Tangential feed way (Cutter displacement) 100 mm Gr. Helix angle 456° KL. being milled tooth number in part geared for small numbers of teeth 4 Gr. Fräserdurchm. 145 mm Gr. Cutter length 170 mm Diameter of the clamping surface of the table 370 mm Distance between cutter middle and clamping area of table of Max 470 mm Distance between cutter Center and middle of the table max 300 mm Milling cutter speeds continuously variable 50-400 rpm. Capacity approximately 17 kW Weight NET approx. 5,5 t Accessories: ...

Category: 101: boring mills and machining centers
New in: 1993
Price: used machinery auction RESALE 3.500 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 7200 kg Dimensions (l x w x h) approx.: 3400 x 3300 x 2910 mm Description: Table size 900 x 550 mm, table load 800 kg, Displacements X / Y / Z 700/630/480 mm, feed rates up to 10 m / min, rapid traverse 30 m / min, spindle intake DIN 69871-40 (SK 40), spindle speed 30-8000 rpm, 30 tools in warehouse, control Dialog 112, Blum tool break detection, Knoll clamping conveyor

Category: 901: tractors
New in: used
Price: request quote
Location: Land-at AT Burgkirchen
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

read operating hours: 2.491 h first registration: 07.12.2011 FIN: ZBBN17891 type, variant, version: BN/BNLCFX/VRED indicator: GR-363 DM performance: 118kW displacement: 6. 728ccm drive type: diesel equity / total weight: 6.785/10.000kg color: Blue facilities: continuously variable Gear, sprung Vorcherachse, front hydraulic PTO and connections front compressed air, 4 controllers, trailer hitch, hydraulic top link, Deluxe radio, Deluxe seat tyres: Bayside 650/65 R38 rear, 540/65 R28 front documentation: licence of types of present key: 1 notes to the State: cleaning needs, abrasions around on the tractor is pointed out explicitly that no complete inventory and check the functionality of the au ...

Category: 101: boring mills and machining centers
New in: 1986
Price: used machinery auction RESALE 3.200 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 6500 kg Dimensions (l x w x h) approx.: 3780 x 2570 x 2950 mm Description: Table size 1240 x 550 mm, table load 800 kg, displacements X / Y / Z 1000/508/460 mm, between columns 650 mm, feeds max 5 m / min, rapid traverse 24 m / min, spindle intake DIN 69871-50 (SK50), spindle speed 3150 rpm, 30 tool places in warehouse, control Mazatrol M 2, from steering control on the 4th Axis Tsudakoma ø 250 mm

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-at AT Schwechat
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Special cars to 36-1000 SX 8 x 8 read mileage: 14.525 km Matriculation year: 7.1.2006 FIN: WMAX31ZZ56L044356 Code: SW-230FW Performance: 735kW Displacement: 21927ccm Drive type: Diesel Equity / total weight: 22745/32000 kg Color: Red Construction: special construction Documentation: types of licence available Key: 1 Comments to the State: small dent right rear Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer ass ...

Category: 101: boring mills and machining centers
New in: 1992
Price: used machinery auction RESALE 3.200 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 6750 kg Dimensions (l x w x h) approx.: 5250 x 2850 x 2500 mm Description: Pallet size 900 x 410 mm, table load 500 kg, Displacements X / Y / Z 560/410/460 mm, feedings up to 8 m / min, rapid traverse 24 m / min, spindle intake DIN 69871-40 (SK 40), speed 60-7000 rpm, 30 toolboxes in warehouse, control Mazatrol M32a, cooling through the spindle, extra cooling and 3-D package control Mazatrol M 32a

Category: 2500: miscellaneous
New in: 2002
Price: request quote
Location: Land-at AT Schwechat
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

read mileage: 17.898 km Matriculation year: exportieren FIN: WMAX31ZZZ1W044249 Type, variant, version: VFAEG/E2/36.000 Code: SW-203FW Test badge: 06/2019 : KW 735 Maximum speed: 138 km/h Displacement: 21.927 cc Drive type: Diesel Equity / total weight: 22.197/32,000 kg Color: Red Facilities: 2 PCs. seats, roof hatch access, div. of counter space, storage boxes, left, right and at the rear, head for roof access, Tires: 16.00/R20 Documentation: types of licence available Key: 1 Comments to the State: abrasions all around vehicle, sticker residue around vehicle Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is sti ...

Category: 101: boring mills and machining centers
New in: 1990
Price: used machinery auction RESALE 3.200 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 4500 kg Dimensions (l x w x h) approx.: 2300 x 2400 x 2750 mm Description: Table dimensions 900 x 410 mm, table load 300 kg, Displacements X / Y / Z 560/410/460 mm, Power supplies up to 12 m / min, rapid traverse 30 m / min, Spindle mounting DIN 69871-40 (SK40), speed 100-10000 rpm, 30 places in warehouse, control Mazatrol M 32

Category: 2500: miscellaneous
New in: 2006
Price: request quote
Location: Land-at AT Schwechat
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Special cars to 36-1000 SX 8 x 8 read mileage: 16.786 km Matriculation year: 04.09.2006 FIN: WMAX31ZZ96L043632 Code: SW-228FW Test badge: 09/2019 : KW 735 Maximum speed: 138 km/h Displacement: 21.927 cc Drive type: Diesel Equity / total weight: 22.780/32,000 kg Color: Red Construction: special construction Facilities: 2 seats, lockable boxes (3) at the rear and side (2), with roof access, div. storage areas in the Interior Tyres: 16.00R20 Documentation: types of licence available Key: 1 Comments to the State: glass panel right front (lateral) vehicle, div. all-round has leaping, sticker residue paint damage all around vehicle Expressly stated, that no complete inventory and ...

Category: 101: boring mills and machining centers
New in: 1995
Price: used machinery auction RESALE 3.500 €
Location: Land-nl NL Netherlands
Seller: Surplex GmbH

Weight approx.: 3850 kg Dimensions (l x w x h) approx.: 2250 x 2500 x 2400 mm Description: Table size 760 x 380 mm, table load 400 kg, Displacements X / Y / Z 510/360/460 mm, discharge 460 mm, feed to 10 m / min, landing 30 m / min spindle: take-up MAS BT30, speed 300 - 30,000 rpm, 20 place tools in warehouse control Yasnac

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-de DE 47228 Duisburg, Bergheimer Str.119
Seller: Serin Graphische Maschinen

Double power bag with grip hole reinforcement equipped with: Usable welding and cutting width: 850 mm Bag width (feed length): 220-600 mm Bag height: 280-600 mm Number of lanes 1 Maximum number of cycles (cycles / min) 70 cycles / minute Max unwind width 1200 mm Max unwinding diameter 1100 mm Servo Edge Guide Photo cell Including - Nordson gluing plant of 2002

Category: 104: grinding machines
New in: used
Price: used machinery auction RESALE 50 €
Location: Land-de DE Germany, 69168 Wiesloch
Seller: Surplex GmbH

Weight approx.: 100 kg Dimensions (l x w x h) approx.: 650 x 700 x 1450 mm Description: cup wheel diameter 125 mm, on steel base frame, with 2 replacement discs and assembly key, with workpiece clamping unit, intended for round material, diameter up to approx. 40 mm, suction unit in the table at the bottom

Category: 105: saws
New in: 1992
Price: request quote
Location: Land-de DE
Seller: Czech Industrie Service

Section rd.: 380 mm Flat cutting area: 380 x 500 mm Belt speed: 19-100 mtr. / min. - infinitely variable Total power: 3 KW / 400 V Machine weight: 600 kg Equipment / Accessories: MITRE cuts 45 ° Adjustable belt speed Coolant system 3 new replacement blade All technical specifications have been created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the bandsaw in advance in our factory under power.

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 102: lathes
New in: 2008
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

IEMCA bar loader mod VIP 80 er-II / BJ. 2008 / round Ã? 5 to 8 mm. / page length square material 5 up to 55 mm hexagonal material 5 to 65 mm. / workpiece height length 210 up 1615 mm. / Materialkäpazität 250 kg / Wekstückwechselzeit 27 sec / advance 0-500 mm-sec. / Return speed 1400 mm-sec. / 6 bar / longitudinal displacement device / good condition / special price Fe.gi.Maschinen.SBG.at IEMCA bar feeder mod VIP 80 er-II / year 2008 / round Ã? 5 to 8 mm. / side length of square material 5 to 55 mm / height hexagonal material 5 to 65 mm / workpiece length 210 to 1615 mm / material capacity 250 kg / workpiece change time 27 sec. / feed rate 0-500 mm-sec. / return speed 140 ...

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 107: sheet metal working
New in: new
Price: request quote
Location: Land-de DE 42659 Solingen, Eichenstraße 65
Seller: Härtel Laser & Wasser

An affordable entry into the water jet cutting. Economical solution for 3-axis or abrasive 2D cutting. Table 1,500 x 3,000 mm The Z axis stroke 200 mm Working height 800 mm Table load 800 kg / m ² Max working speed 12, 000 mm/min Optionally, 16 000 mm/min Max express gear speed 30 000 mm/min Repeatability +/-0.1 mm Positioning accuracy +/-0.05 mm / 300 mm High pressure pump Härtel PowerLine 3741 classic Max working pressure 4.130 bar Power 37 kW Displacement 3.8 L / min Control PLC Siemens electric motor Intensifier (amplifier) H2O JET standard equipment: easy to use control P 886 Igems software with nesting level 1 Macro program (cycles) Handwheel  ...

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230 V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100 x 115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24 V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulati ...

Category: 109: other metal working machines
New in: 2013
Price: 7.650 €
Location: Land-de DE 41238 Mönchengladbach, Langmaar 7
Seller: C.R.A.M.E.R. Schleiftechnik e.K.

TOOL MASTER QUADRA, SK50, PCB Suitable for extra long tools Tool setting device tool precision by the highest quality standards in production Fatigue-free working by ergonomically arranged control elements Optional SK40 or SK50 spindle system, patented PCB needle roller bearings Scope of delivery: Tool measuring and presetter TOOL MASTER Quadra All-in one PC with 15 "touch screen Label printer Base cabinet Manual Eichdorne SK 40 and 50 SK -Measuring range X 400 / 600 -For SK40 + iso50 -Infinite fine adjustment in the X and Z axis -Measuring field displacement in X - and Z-axis (up to X-150 mm) -High precision thanks to the needle roller bearing (± 2 &Aci ...

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 708: refrigeration engineering
New in: new
Price: request quote
Location: Land-nl NL Mijdrecht, The Netherlands
Seller: VRT International B.V.

NUAIRE SC 800 AA 46 GX + 0J Product number:M19-7075 Cooling capacity:0,001 kW Number of fans:1 Displacement:27500 Voltage:400 Volt Motor power:7,5 kW Dimensions:910 x 560 mm Weight:96 kg Year:NEW / UNUSED / 2018 Number in stock:24 piece(s) Price:Quotation request New unused high pressure fans for blast freezer. Please visit our website: used-refrigeration

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 708: refrigeration engineering
New in: new
Price: request quote
Location: Land-nl NL Mijdrecht, The Netherlands
Seller: VRT International B.V.

NUAIRE SC 800 O 45 GX – 0FM6 Product number:M19-7076 Cooling capacity:0,001 kW Number of fans:1 Displacement:27.000 Voltage:400 Volt Dimensions:910 x 535 mm Weight:58 kg Year:NEW / UNUSED / 2018 Number in stock:78 piece(s) Price:Quotation request New unused high pressure fans for blast freezer. Please visit our website: used-refrigeration

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 1009: excavators
New in: 2010
Price: 30.000 €
Location: Land-uk UK LE10 Wolvey, Cloudsley Bush Lane
Seller: Machinery World LTD

2010 TEREX TC125 MAKE & MODEL TEREX TC125 Year 2010 Running hours 1932 Load capacity --- Type tracked excavator Condition USED EQUIPMENT DETAILS: CONFIGURATION: SERIAL NUMBER: TC01250490 WEIGHT: 12.8 Tons BUCKET - Bucket: No - Cylinder: ok QUICK COUPLER - Type: Hydraulic - Brand / Model: Lehnhoff SWE MS08 STICK - Stick length: 2 m - Steel condition: ok - Welded: ok - Fishplated: ok - Cylinder: ok - Pins & bushings: imperfection ? Medium play AUXILIARY HYDRAULIC - Number of auxiliary hydraulic lines: Unit equipped with two aux. hydraulic lines BOOM - Boom type: Swingaway boom - Steel condition: ok - Welded: ok - Fishplated: ok - Cracked: ok - Cylinder: imperfection ? Boom cylinder ...

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 301: injection moulding machines
New in: 1998
Price: 11.900 €
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer: Ferromatik Milacron Type: K160 - S year of manufacture: 1998 Control: AMR 33 Clamping force: 1600 kN Tie bar distance: 500 mm x 500 mm Plate size: 750 x 750 mm Mould installation height: min. 300 mm Opening stroke: 650 mm Plate distance max.: 950 mm Screw: 50 mm Displacement: 353 ccm injection pressure: 1472 bar General Engine: 22 kW Heating: 13.6 Dimensions: 6.9 x 1.8m x 2m Weight: 8500 kg Screen text: German / English Additional equipment Euromoap Core move x 1 accumulator

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 103: milling machines
New in: 1993
Price: 8.900 €
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturers cover Type FP5 - 80T Built in 1993 Control type: Dialog 11 X-axis 800.0 mm Y-axis 550.0 mm Z-axis 500.0 mm Table length 1100.0 mm Table width 550.0 mm TECHNICAL DATA The offset of the X-axis: 800 mm Y axis displacement: 550 mm Process axis of: 500 mm Pendulum table: 1100 mm x 550 mm Spindle speed: 0-5000 RPM GENERAL Service Manual: Yes Tool Magazine: 30 piece Control: German Opening hours: Height: 2,3 m Length: 5.7 m Width: 6.2 m Weight: 5500 kg Power supply: 380 V

Category: 1900: general inventory
New in: 2004
Price: used machinery auction RESALE 800 €
Location: Land-de DE Germany, 66287 Quierschied
Seller: Surplex GmbH

Weight approx.: 710 kg Dimensions (l x w x h) approx.: 1800 x 650 x 1700 mm Description: ATLET PSD 125/160 High lift jack, electrical loading capacity: 950 kg lifting height: 1700 mm incl. battery charger Lift jack was unused since approx. 3,5 years, so that a battery replacement is necessary

Category: 109: other metal working machines
New in: 1991
Price: 5.900 €
Location: Land-de DE
Seller: Beppo Bercht Werkzeugmaschinen

Paths x/y/z 1.800 mm / 1000 mm / 1000 mm Measuring software Quindos air bearings Accessories: key recordings Comments: Repair of an electrical panel is necessary since faulty. For the measuring machine, there is no regular service and no replacement parts on the part of the manufacturer. Sale as part.

Category: 1900: general inventory
New in: 2003
Price: used machinery auction RESALE 1.400 €
Location: Land-de DE Germany, 66287 Quierschied
Seller: Surplex GmbH

Weight approx.: 1100 kg Dimensions (l x w x h) approx.: 1900 x 720 x 1400 mm Description: LINDE L 12 L High lift jack loading capacity: 1200 kg lifting height: 1700 mm incl. battery charger Lift jack was unused since approx. 3,5 years, so that a battery replacement is necessary

Category: 301: injection moulding machines
New in: 2000
Price: request quote
Location: Land-de DE Hannover - Sehnde
Seller: Spritzgussmaschinen-Handel Makies GmbH

used injection moulding machine -new screw - new cylinder Manufacturer: Arburg Type: 520C 2000-675 Control Selogica Year of construction: 2000 Operating hours: 56,400 h Features/Extras: -2x core pull - Screw cylinder new clamping unit: clamping force: 2000 kN/ 200 tons Bar dimensions H X V 520 x 520 mm Plate size hxv: 728 x 728 mm Installation height min: 250 mm Distance daylight plates max.: 900 mm Opening stroke: 650 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection unit Screw diameter 55 mm Displacement 427 ccm Injection weight: 360 gr./PS Injection pressure: 1720 bar Nozzle contact force: 70 kN Cylinder he ...

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 2500: miscellaneous
New in: used
Price: 780 €
Location: Land-de DE 47665 Sonsbeck, Pauenstr. 71
Seller: AVC GmbH

Würth line laser, MLLG 18, with tripod 1 piece new, only once to the demonstration opened,. High-quality, electronic, self-levelling line laser with highly visible green laser lines. Including a laser enhancement glasses and a battery. Fast leveling, maximum accuracy and huge labor savings Electronic self-leveling, lines individually switchable Continuous 360° line in the horizontal and the vertical. 4 x 90 ° lines in the vertical. 90 ° angle on the floor. To kill for horizontal and vertical application without the device With Plumb function Trouble-free use in bright light at longer distances In combination with the handheld receiver When it rains, as well as in dust-rich envi ...

Category: 1107: other energy machinery
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-es ES Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2018. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 202: milling machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

Spindle Gomad DFDA-3A -machine in stock -After reviewing the technical -very good condition TECHNICAL PARAMETERS: -main motor 4 kW -spindle diameter 25 mm -spindle length 190 mm -height adjustable spindle -spindle for podtrzymce replacement -tool diameter max 280 mm -four types of speed -3000/4500/6000/9000 -right/left rotation -eccentric clamp -Sideloaders to czopowania cart dimension 820 mm x 400 mm -length of the trolley the total 1200 mm -diameter 150 mm Overall dimensions of the machine: -length: 160 cm -width 130 cm -height 150 cm -weight of ~ 1000 kg

Category: 901: tractors
New in: 1979
Price: 5.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 75; Transmission: Zweirad; Front tyre size: 7.50-16; Rear tyre size: 15.5-38; Accessories: Forstkabine, Gänge vorwärts:8, Gänge rückwärts:4, Motorhersteller:John Deere, Steuergerät - Doppelt wirkend (1x), Hydraulische Lenkung, Schaltgetriebe, Diesel, Hydraulische Bremse, Hydraulikanlage (1 Kreis), Nassbremse; Engine displacement [cm³]: 3920; Top speed [km/h]: 30

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)