cbm used for sale

ID3774 MRS 8 cbm – Motorised two-shell grab year/Baujahr 1998 6.5 t 8 cbm Motorised two-shell grab with electro-hydraulic drive 8 cbm Engine Clamshell Grab with Electro-Hydraulic Drive

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

TECHNICAL SPECIFICATIONS Number of silos: 4 pcs. Number of lanyards: 2 pcs. COMPOSED OF - 3 loading silos of approx. 90 cbm each - Diameter: 5,800 mmm - Hot-dip galvanized steel substructure - 1 loading silo with approx. 115 cbm - Diameter 7,000 mmm - 1 pc. take-off tape, AA 21,500 / BB 800 mm - 1 piece loading conveyor, AA 18,000 / BB 800 mm - Discharge height: approx. 4.0 m - Incl. weighing system

ID3129 MRS 6,8 cbm grapple 6.8 cbm MRS hydraulic grab 6.8 cbm MRS Hydraulic Grab

TECHNICAL SPECIFICATIONS Floating dredger Manufacturer: RIEDINGER Designation: Floating dredger with floating bands and land band Type: Floating Type:SG 40 K Year of Make: 1963 Gripper capacity: 4.5 cbm Grab weight: 7.5 t Excavator depth: 60 m Number of mooring winches: 4 pcs. TECHNICAL SPECIFICATIONS Dewatering screening machine Manufacturer: WIMA Year of Make: 2021 Screen length: 5,000 mm Screen width: 2,000 mm Number of screen decks: 2 pcs. Pontoon dimensions: - Length: 15,000 mm - Width: 11,000 - Height: 1,800 mm - Draught: 1,500 mm SPECIFIC COMMENT - Fully functional dredging system - Incl. discharge belt and floating land belt - Incl. 2 new hitch gears - Incl. 90 kW spare motor - Optional land belt system also available

TECHNICAL INFORMATION Manufacturer: RITZ Pump Factory Name: Fresh water pump Built: 1998 Head: 120 m Pumping capacity: 180 cbm/h Speed: 1486 Ump Drive power: 90 kW If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Railing Cone 90 ° Drawing available Rotary valve

60 cbm Aluminum Silo Manufacturer: Zeppelin Bulk density 0.6 Diameter 2.40 m Height without railing 15.50 m Cone 90 ° Ladder Railing Filter Rotary valve Drawing available

TECHNICAL SPECIFICATIONS Number of silos: 3 pcs. (identical) Capacity: approx. 200 cbm/pc. Diameter: 6,500 mm Silo body height: 8,500 mm Cone height: 4,000 mm Total height: approx. 10,500 mm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - At the cone precipitation drainage

TECHNICAL SPECIFICATIONS Description: Bulk Silo, Sand Silo Capacity: approx. 90 cbm Diameter: 6,000 mm Total height: approx. 8,500 mm Height of silo body: approx. 4,500 mm Discharge height: approx. 4,000 mm Support beam: 30x40 cm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - Suitable for truck loading

General SKU004U062 MakeEngelsmann TypeKSM-9 Cbm No.10 562 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume12000 Ltr. Motor16 KW Specified Features - Pre-mixer Pre-mixer:Conical screw mixer: (1x) Capacity12.000 Ltr, Useful 9.000 Ltr Vessel sizesdia. 2100x5050mm Manholedia. 500mm Inletdia. 150mm Motor11/16 KW, 500 Volt (Ex) Speed mixing shaft3/6 Rpm MaterialStainless steel 1.4541 (321) With jacketcheck General Floorspace2,2x2,2 M Total height6,5 M Weight8500 KG ATEX designedcheck Extra Specifications- Jacketed screw (120 Ltr), Working pressure 4 bar (Test pressure 5,2 Bar)DiscountPre-mixersEngelsmannDiscountMixers > Pre-mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Cone 90 ° No ladders and railings

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Cone 90 ° No ladder or railings

TECHNICAL SPECIFICATIONS Manufacturer: MRS Greifer- und Maschinenbau Designation: Motor-Zweischalen-UW-Baggergraber Type: 2.5. Year of construction: 2014 Content: 3.5 m³ (at 20° bulk cone) Net weight: 4.900 kg Min. crane eligibility: 11.900 kg Closing time/opening time: 14.5 s / 8.0 s Required rope diameter: 22 - 24 mm Voltage/frequency/current consumption: 400V/50Hz/70 A Motor power: 37.5 kW Oil volume: 200 l Dredging depth under water: max. 100 m SPECIFIC COMMENT - Last revision 2020 - Degree of wear at approx. 50%

Containerized Tank Washing and Waste Water Treatment Plant (WWTP) for ISO Tanks and Road Tankers. Complete turnkey system consisting of a tank washing unit and a waste water treatment and recycling plant. Tank Washing System: - Tank wash system installed in container - Designed for 5-8 ISO tanks/day and 3-4 road tankers/day - Double-sided GRP wash gantry with access stairs - 6 pump and water heater sets - Capacity: 12,000 l/h - Operating pressure: 100 bar - Water temperature up to 80°C - Hot water wash and cold water wash - Fresh water and recycled water operation - Dual detergent dosing system - 205 litre detergent storage - 2 ISO tank cleaning heads - 3 road tanker cleaning heads - High-pressure hot/cold cleaning lance - Stainless steel high-pressure pipework - Remote gantry-mounted control panel - Designed for top and bottom tank cleaning Waste Water Treatme ...

ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M 2,5 TZ capacity: 112 cbm/h Mixer: Stetter twin shaft mixer - Stetter DW 2,5 Mixer cleaning system optional possible Storage bins / compartment batcher: 4 aggregate inters per 17,5 cbm (Total 70 cbm) Silos: Optional 2 – 5 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 550 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling obje ...

Channel baler Presto HPK 50 HS, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Note: Knives and counter-blades as well as all sliding plastics have been replaced. The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability f ...

Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Hours: 5812 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Climbing tape Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Gradient: 29° Speed: 0.6 m/s Materials: paper, cardboard, foil, PET bottles The press is in working condition and has been inspected and tested ...

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Design: Catamaran construction, floating Type: RS 8.2 - 230 PK Year of Make: 1981 Gripper capacity: 8 cbm Grab weight: approx. 10.5 t Excavator depth: 60 m Hoist winch motors: 2 x 175 kW Lifting gear: 2 pcs. Fabr. DEMAG, type HDH 236 Number of mooring winches: 4 pcs. Pontoon dimensions: - Length: 22,000 mm - Width: 24,000 mm - Height: 2,000 mm - Draught: 1,400 mm SPECIFIC COMMENT - Fully functional mining equipment - If required, an associated folding barge (100 cbm) can be offered - Incl. 1 spare engine Mannesmann-Demag 175 kW Available from December 2024 / early 2025

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M C 1TZ capacity: 56 cbm/h working hours: 0,0 Mixer: pan mixer - Stetter 1,0 m3 Storage bins / compartment batcher: 4 aggregate inters per 10cbm (Total 40 cbm) Silos: Optional 2 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference tublomix plants by appointm ...

Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...

ID2300 5 piece Silos 5 piece silos (approx. 150 cbm each), screwed, on steel feet approx. 3 m high, silo height approx. 5 m, diameter approx. 7 m 5 silos (approx. 150 cbm/silo), screwed, on steel feet approx. 3 m high, silo height approx. 5 m, diameter approx. 7 m

ID3270 Keestrack Combo year/Baujahr 2014 approx. 240 hours (real!) /hours (real!) 17.5 t Mobile crawler screening system, 6 cbm hopper, 2-deck screening (2700 x 1200 mm)(screen box KT2712E), rubber feed belt, Deutz engine DT2011L04i (53 KW), radio remote control Track-mounted screening plant, 6 cbm hopper, 2-deck screening (2700 x 1200 mm)(screen box KT2712E), rubber feed belt, Deutz engine DT2011L04i (53 KW), radio remote control

TECHNICAL SPECIFICATIONS Manufacturer: Tecnomeccanica ZUERCHER S.p.A. Bergamo Description: Floating grab dredger Design: Grab excavator with gantry body Type: TZBK 150 (15t) Year of manufacture: 1989 - Revised: 2017 Gripper volume: 4.50 cbm Shell grab type: MRS 1090, rope mechanical Total load capacity grab: 15.0 to. Max. dredging depth: 60 m underwater Conveying capacity: approx. 100 cbm/h (approx. 180 t/h) Power supply: SENN generator set (BJ 2017) Unit Type: FDG 650 Engine: VOLVO TWD 1653 GE (6-cylinder) Rated power: 650 kVA (547 kW) Particulate filter system: CLEAN LIFE, type SMF-AP 8.1 Pre-screen bar grate available: yes Screening machine: 1-deck, with shower Dewatering Bucket Wheel: SMT Stitch Type: E3009 (BJ 2017), 3.0 kW Number of mooring winches: 4 pcs. Number of discharge belts: 4 pcs. Overall length: 25,190 mm Total length pontoon: 20,800 mm Overal ...

Foot: 900 mm Vertical: 4980 mm Head: 2770 mm Belt speed: 0.47 m/s Flow rate: 10.0 cbm/h Bulk density: 0.18-0.25 t/cbm Engine power: 0.55 kW Speed range: 136 rpm Chain drive: 5/8" Chain Pulley Motor: Z = 15 Sprocket B. movement: Z = 38 Shaft design: sheet steel 3+4mm Removable side plates in the base Further measurements can be found in the attached plan.

ID3558 Tanker year/Baujahr 1953 Tanker, manufacturer: Schiffswerft Hilgers, Rheinbrohl, Germany, length 81.89 m, width 8.20, max draft 2.54 m, max deadweight capacity 1172 t, max displacement 1548 cbm, 1 main engine Volvo Penta 880 KW (overhauled 150 hours ago), ship has a single hull and a single bottom. The ship can be brought into dry dock with new papers. Tanker, builder: Hilgers Shipyard, Rheinbrohl, Germany, length 81.89 m, width 8.20 m, maximum draft 2.54 m, maximum deadweight 1172 t, maximum displacement 1548 cbm, single main engine Volvo Penta 880 kW (overhauled 150 hours ago), single hull and single bottom. The vessel can be drydocked with new documents

Specifications: Vnenn: 2,950 cbm/h Vmin: 2.251 cbm/h Suction nozzle Ø 200 mm Motor power 3.7 kW Rated speed 2,805 rpm Rated current 7.5 A Frequency 50 Hz, 3 phases Test class H2 Vacuum at Vmin at the interface between dust collector and dust generator (4 m hose) with suction nozzle Ø 200 mm = 2,200 Pascal = 22, with suction nozzle Ø 180 mm = 2,500 Pascal = 25 Filter cleaning by compressed air (to be triggered manually, compressed air connection on site, max. 4 bar) Delivery incl. various chip collection bags

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Type: 5.5 Year: unknown (80s) Gripper capacity: 5.5 cbm Hoist: 2 x 120 kW Gearbox Type: HD 236 (Mannesmann Demag) Screening machine: Främbs&Freudenberg ECK 1500/5000/1 SPECIFIC COMMENT - In need of repair and overhaul! - Incl. MRS gripper 5.5 cbm - Incl. cat with hoist - Pontoons dry

TECHNICAL SPECIFICATIONS Manufacturer: MRS Description: Motorized clamshell grab with electro-hydraulic drive Type: Hydraulic Year of Make: 2006 Content: 6.8 cbm Net weight: 10,000 kg Flat bulk density: 2.0 t/cbm Dump cone: 20° Closing time: 19.0 sec. Opening time: 10.0 sec. Hydraulic pressure "close": 240 bar Hydraulic pressure "open": 180 bar Electric motor: 55 kW Transport dimensions (length/width/height): 4,400 x 2,000 x 3,930 mm

ID3650 Wagner NFK2000 year/Baujahr 1998 Dust extraction system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags Dedusting system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags

ID3616 Stichweh S2500 year/Baujahr 1971 Floating grab, 2.5 cbm grab capacity (built in 1985), dredging depth approx. 50 m, with fine sand recovery with belt dewatering, Linatex pump and cyclone, including automatic device and coarse screening Floating grapple, 2.5 cbm grab capacity (year of construction 1985), dredging depth approx. 50 m, with fine sand recovery with belt dewatering, Linatex pump and cyclone, incl. automatic device and coarse screening

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h since major service, Dimensions: 3,55 x 1, ...

Tanks fuel tank fuel tank storage tanks 5 cbm TAnkstelle diesel tank Gas station fuel tank tank tank heating oil tank storage tank 5,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.70 m + console / D = 1.60 m / weight CA. 1.6 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on customer's request,  ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Tanks fuel tank fuel tank storage containers 50 cbm TAnkstelle diesel tank TAnkstelle diesel tank tank tank heating oil tank storage tank 50.000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = approx. 10.70 m + console / D = 2.50 m / weight CA. 9 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on custome ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 60,000 litre single-wall insulated storage tank as follows. Rated capacity 60 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 12,680 mm plus insulation 100 ...

Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 100,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved . Rated capacity 100 cbm Piece 1 new The tank is made of steel built Novembe ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 60,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 25,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

Tanking system Heating oil tank Diesel tank storage tank Hazardous fuel tank Safety tank Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 50,000 liter double-walled storage tank for the storage of diesel. fuel oil or other hazardous substances as follows. Rated capacity 50 cbm Piece 1 used but overhauled, i.e. the container is cleaned, new reworked, primed and painted Colour equipment lacquer RAL. However, you can also make your own colour wishes at any time Bring. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate in accordance with DIN 6616 D/2 and type plate Piece.  ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 50,000 litre single-wall insulated storage tank as follows. Rated capacity 50 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 10,740 mm plus insulation 100 ...

Bag opener to open the bag like "Gelber sack", etc. As a stand-alone device usable or as components in E.g. a sorting facility. Capacity: 20-30 cbm Power: ~ 22kW Dimensions: 8000x2350x2700mm Weight: 11t Exhibition machine, condition as new. more data and estimate on request.

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...