cauhe used for sale

96” x .500” x 100,000# CAUFFIEL/BRADBURY FLYING SHEAR CUT TO LENGTH LINE MANUFACTURER – CAUFFIEL/BRADBURY YEAR – 2013 LINE DIRECTION –LEFT to RIGHT MATERIALS – CARBON STEEL THICKNESS – .075” MIN., .500” MAX. COIL WIDTH – 96” MAX. THRU LINE (84” MAX. THRU BRADBURY LEVELER) COIL WEIGHT – 100,000# MAX. COIL OUTSIDE DIAMETER – 39” MIN., 84” MAX. COIL INSIDE DIAMETER – 20” MIN., 32” MAX. SHEET WIDTH – 36” MIN., 96” MAX. (84” MAX. THRU BRADBURY LEVELER) SHEET LENGTH – 144” MAX., 492” MAX. w/ SPECIAL HANDLING PACK HEIGHT – 20” MAX. PACK WEIGHT – 20,000# FLATTENER TYPE – COMBINATION 3 ROLL & 7 ROLL FLATTENER LEVELER TYPE – 11 ROLL, 4 HIGH, HYDRAULIC LINE SPEED – 150 FPM MAX. UNCOILER DRIVE – HYDRAULIC FEED-UP FLATTENER DRIVE LEVELER DRIVE – 300 HP LINE COMPONENTS: COIL PUSHER TWO (2) ROLL COIL LIFT DUAL CONE ...

The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

Replacement motor for caustic pump, washing machine pump motor, water pump motor HANNING ELEKTROWERKE BE 55 C9 - 008 ( BE55C9-008 ) motor: 170 Watt 230 V 1AC 50 Hz shaft diameter: Ø 5 mm, length: 19 mm, with toothing shaft stump for fan wheel: Diameter: Ø 8 mm, Length: 18 mm used, tested ! Dimensions: 148 x 85 x 94 mm

Drautz caustic machine for 60x80 trays with salter. Technically inspected and cleaned the system. Total length: 3.60m. Feed strap folded up 2.50m Width 1.00m

Plastic tank used for caustic soda, volume: 5000 liter, dimensions: Ø 2000 mm x 2200 mm.

Lye pump, washing machine pump, water pump, centrifugal pump VEM KP8,3C Connections: Ø 20 mm motor: 130 Watt 220 V 1AC 50 Hz shaft stump for fan wheel: Diameter: Ø 6 mm, Length: 11 mm New ! Dimensions: 140 x 140 x 110 mm

Lye pump, washing machine pump, water pump, centrifugal pump HANNING ELEKTROWERKE BE 55 C9 - 008 ( BE55C9-008 ) connections: Ø 24 mm / motor: 170 Watt 230 V 1AC 50 Hz shaft stump for fan wheel: Diameter: Ø 8 mm, Length: 18 mm with fan wheel used, checked! Dimensions: 185 x 120 x 94 mm

here an immersion lye tank of special dimensions suitable for 60x40 trays and 55x60 trays Dimensions: 70 cm long (130 m long with sheet metal butts) 65 cm wide 85 cm high

- Standing on feet - Diameter : 2900 mm (incl. insulation) - Height : approx. 7000 mm - Content : approx. 40 m3

Pneumatic gun, 2 component gun, multifunctional gun, cartridge gun, pneumatic cartridge gun, pneumatic cartridge gun, cartridge press -Manufacturer: Festo, pneumatic cartridge gun -Cartridge length: 212 to 218 mm -Cartridge diameter: 45 to 50 mm -Inlet pressure: max. 10 bar -Accessories: see photos -Box dimensions: 600/260/H100 mm -Weight: 2.5 kg

Overview  The bottle washer was manufactured in 1998 by the German company Krones. It is located at a German mineral fountain and is part of a line that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The bottle washer is still assembled.  Technical data  Capacity: 44,000 bph  Control range: 17,000 - 50,000 bph  Bottles per row: 35  The Machine in Detail / Equipment Features Residual emptying Pre-soak/ pre-caustic High pressure pre-spraying with automatic screen discharge Machine multi-part with 3 shocks Pre-soak, water zone incl. head section Discharge in V2A Post-leach immersion bath KES Post-leaching area in V2A  Bottle cell in steel with plastic mouth Feeding table in VA Insertion finger feed with safety shutdown Discharge with pick-up finger and safety cut-out Muzzle basket control at the ejector Shard ejector behind the d ...

Plant for rinsing and chemical regeneration of a beer post-filtration., Additional title: cleaning system for secondary beer filtration, Volume caustic vessel: 600 l, Volume disinfektion vessel: 1000 l, Volume water vessel: 1000 l, Material: caustic vessel: 1.4401; disinfection/water: 1.4301, Base construction: part for caustic: on frame with 4 dome feet; disinfection/water: on frame with 6 dome feet, Features: part for caustic: caustic vessel, thermometer, heating coil, dosing vessel, conductivity measuring device, centrifugal pump disinfection/water: disinfection vessel, water vessel, Hilge Hygia II centrifugal pump: 4 kW, 20 m³/h, Periphery: control cabinet with Simatic OP7 touchpad

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

Overview The line can handle 30/50 ltr. KEGs and is equipped for flat, combi and basket fitting. For other KEG sizes the machines can be adapted. The pre-cleaning machine is a 1-head machine with residual pressure test of the KEGs. On the cleaning head, the KEGs are emptied, purged with air to remove the residual CO2, cleaned with mixed water and rinsed with caustic and partially filled. The KRF 401 main cleaning and filling machine runs particularly smoothly due to its special design and is mounted on an open machine base frame. The piping is integrated in the machine. New components have been installed: Media valves, beer valves and new pneumatic valves, make Festo, in stainless steel control cabinets. Original documentation in German, consisting of spare parts lists, operating instructions, hardware and software included. Tech Specs: Capacity: 60 KEG/h 30-50 L KEGs processable Complet ...

Cryolipolysis Machine (cryolipolysis slimming machine) This is a "fat burning machine". 1 Fat Freezing Handle: Since triglyceride in fats is converted into solid, especially low temperatures, it uses advanced cooling technology to Selectively target fat bulges and eliminate fat cells through a gradual process that does not damage the surrounding tissues, reduces unwanted fat, When fat cells are subjected to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated by the body's normal metabolic process to eliminate unwanted fat. 2. 40K cavitation handle: Strong sound wave explosion fat head with collective strong sound wave head, strong sound wave of 40kHz can be emitted to the human body to violently affect fat cells and cause frictional movement between fat c ...

year: 1991, modification controls and measuring technique 2004 no of tanks: 3 pcs (water, caustic, recovered water) material: s/steel heating: steam Consisting of: 1 x CIP-caustic tank content: 7.000 l, make: AMS 1 x CIP-hotwater tank content: 7.000l, make: AMS 1 x recovered water content: 4.000l, make: AMS - controls Siemens S7, new measuring technique 2004 - incl. all valves and pumps - incl. heat exchanger - incl. internal piping

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

used boiler extendable for Werner &, Pfleiderer DK 250 Edelstah? Product? Manufacturer: Werner & Pfleiderer? Type: DK 250? Condition: used, baker's condition - needs to be thoroughly cleaned before use? The boiler is integrated on a trolley? The car is easy to drive and rotate? The boiler can be turned in all directions on the trolley? Material trolley: metal? Material shell: stainless steel? Inside of the cauldron: 120 cm, 56 cm deep? Outside of the cauldron: 122 cm, 100 cm high? Stock: 20 pieces

Additional title: 2-vessel-plant, with pneumatic valves, Volume each tank approx.: 12 hl, Length: 0,8 m, Width: 0,8 m, Height: 2,5 m, Variety / Product: acid, hot caustic , Material: Stainless steel, Features: complete internal piping with pneumatic valves; CIP-prerun pump; steam heating with heating coil at caustic tank

Overview  The bottle washer was manufactured in 1996 by the Swiss company PAC. It has residual emptying and pre-spraying and is characterized by low energy consumption. The machine is already disassembled and immediately available.  Technical details  Capacity: 3.000 bph  Bottle length: up to 262mm  Bottle diameter: up to 90mm  Bottles per row: 6  Bottle cell carrier: 72 Water consumption for 0.5l bottle: 0.75m³/ h Heat consumption heating up the caustic (15 - 80 °C): 370 kJx1000 Heat consumption in operation, caustic 80°C: 345 kJ/h x1000 Power connected load: 6kW  Operating weight: 7 t  Space requirement:  Area: 2,675mm x 5,940mm  Height: 2.368mm

caustic diving device esback 78 with caustic drain tap Floor-standing unit made of stainless steel incl. mobile table with shelf and locking castors suitable for sheet size 580 x 780 mm, Dimensions in mm approx.: 700 x 902 x 880 WxDxH Used equipment cleaned and inspected

Used Bottle Washing Machine KLINGER S16 2 90 speed 7000 BPH Model S 16 2 90 Year 1993 Production capacity 7 000 BPH with 2 L bottles Basket plastic with the possibility of washing bottles with max diameter of 95 mm Type of wash suitable for washing glass bottles through caustic baths Dimensions and weight L 9 x W 3 30 x H 3 05 m 19 000 kg Material stainless steel Description of the washing cycle 1st wash Capacity 45 L Maximum allowed operating temperature 150 C Maximum allowed operating pressure 5 bar 2nd wash Capacity 150 L Maximum allowed operating temperature 110 C Maximum allowed operating pressure 2 bar Technical data Nominal capacity 7000 BPH Range of control 4000 8000 BPH Total washing time 7 1 min Time of cycle 8 2 sec Scheduled execution time 16 min Bottles per row 16 Total rows 117 Housings 1600 Loaded rows 100 Preheating Total time 3 min Effective treatment time 2 6 min Sodium ...

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40-50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, piping ...

manual 4-vessel cold-CIP-plant for fresh water, desinfection agent/acid and caustic with pump and all fittings, Additional title: 3 vessels, Volume/measurements desi/acid and caustic tanks: 87 hl diameter 2000 mm, cylindrical height 2500 mm, total height 3500 mm, Volume/measurements water tank: 30 hl diameter 1500 mm, cylindrical height 2000 mm, total height 2900 mm, Length: 5000 mm, Width: 5000 mm, Height: 3500 mm

CIP-plant with 4 tanks in stainless steel with: -batch water tank -fresh watertank -caustic tank (cold) -acid -all fittings, Additional title: 4-vessel, Batch and fresh water tank each: 20 hl Diameter 1300 mm, total height 2300 mm, Caustic and acid tank each: 90 hl Diameter2000/2100 mm (insulation), total height 4200 mm, Length: 6500 mm, Width: 3000 mm, Height: 4200 mm

- Model: Lavatec KES - K 671/185- 2-2-312/25-110R - New chains: 2015 - Rated Capacity: 18000 BTS/h - Total caustic contact time: 11.83 min - Bottle cells: 110 mm - Bottle diameter: min/max. 50 – 100 mm, H: max. 342 mm - Number of bottles per row: 25 - Number of bottles in the machine: 5975 - Capacity of pre-soaking baths: 2880 l - Capacity: 27050 l - Capacity of caustic filter basin etc : 2120 l - Spray basin 1 lukewarm water: 700 l - Spray basin 2 lukewarm water: 700 l - Spray basin 3 cold water: 700 l - Heating medium: Superheated water - Machine in very good condition

Performance: 40 000 b / h -Control of dirt and damage on the side walls and the bottom of the bottles. -Double presence control of liquid (caustic soda) via detection of infrared and high frequency; -Check the status of the head of bottles (damage) -Oryginal technical documentation (Germany language) -additional parts

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Coal-fired power stations new and used For more information and pictures we are available. All prices are free destination world. Following and all resulting costs are due to customer. VAT is not included in the prices. Contract agreements for every single offered item must be agreed on separately and are binding only after signing of contract. Errors excepted. No guarantee for personal and material damages, caused by the buyer due to dismantling. Court of Competent Jurisdiction shall be Germany. All agreements are according to German law. A customer protection agreement (non-circumvention and non-disclosure) was settled according to ICC Paris, France. The seller will be the owner of all goods an material until payment was settled completely. All technical details, measurement specifications etc. are estimated specifications and not binding for the offerer. Subject  ...

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

Bottle washing machine Gera Type: Arcade DS02/110/12 Year of construction: 1993 with 12 bottles in the row Bottle cell: up to 1,0ltr. Capacity: 9.500 bph with Siemens S5 control complete stainless steel machine with pre-soaking, automatic lable removal system and double cautic bath

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Used beater 0,12 KW with gear motor Bauer 27 rpm and aluminum propeller stirrer 300 mm = 1350 RPM gear motor: Gearmotor Bauer, 3 x 230/400 v 0.12 kW, n1, n2 = 27 U/min., 24.5 NM, IP 54 weight approx. 8 kg = M2. With brake. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, material 1.4301 stainless steel. With rigid coupling made of aluminium. Stirrer: Double propeller stirrer, diameter 300 mm, material aluminium very slow running, torque mixer for use in attaching containers or kettles. Also can be used to prevent cavities in powder silos (bridging). With traverse for IBC containers or other containers for extra charge. Caution: Not suitable for aggressive media. 3 pieces in stock.

Multi Chamber Waste Baler Baler BTS-MF75MK The BTS-75MK and BTS-MF200MK Multi Chamber Waste Baler are ideal for compacting loose cardboard, paper and film. Different materials can be collected in two or more chambers. As soon as a chamber is filled the mobile compaction head will be moved over the chamber and material can be compacted into a bale. Users receive a high volume reduction up to 90%. - Solid bales with bale weight up to 75 kg - Suitable for baling of cardboard, film, clothes and many materials more - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Roller guided head for ease of movement - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1969 x 2050 x 872 mm Transportation  ...

Multi Chamber Waste Baler BTS-MF200MK The BTS-75MK and BTS-MF200MK Multi Chamber Waste Baler are ideal for compacting loose cardboard, paper and film. Different materials can be collected in two or more chambers. As soon as a chamber is filled the mobile compaction head will be moved over the chamber and material can be compacted into a bale. Users receive a high volume reduction up to 90% - Solid bales with bale weight up to 200 kg - Suitable for baling of cardboard, film, clothes and many materials more - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Roller guided head for ease of movement - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:16 Ton Motor: 2.2 kW 16 Amp Power suppl: 220-240 V (1 Phase) Machine siz ...

Planers/Mills Manufacturer: Tennant Type: K4 Petrol engine Accessories: 2 extra rolls, 1 x new battery Caution: The motor starts but not continues. Probably is located on carburettor. All information without guarantee