cat 320 used for sale

Key data: 3200 , 60

Screw diameter: 60 mm Injectable volume: Injection Pressure: Passage between columns: 735 x 735 Mould thickness: min: 330mm- max: 680 Opening stroke: 660 mm Number Of Cores :2 Robot interface: E67

Surface grinder BPH 320A/1000

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/60 -Elbe Art.No.: 0.106.110.0001 -Flange Ø 65 mm -Bolt circle: Ø 52 x 6 mm -Dimensions: Ø 65 x 320 mm -Weight: 2 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 40 mm -Outer diameter: 68 mm -Width: 19 mm

tapered roller bearings -Weight: 1350 g -Outer diameter: 130 mm -Width: 29 mm -Inner diameter: 85 mm

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Marangoni Retread - Ring Tread Machine Length 3200mm Max. depth 2298mm Max. height 2120mm Type sizes min. diam. 710mm / max. 1220mm Weight 3500kgs

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 320 mm - Mounting thread: Ø 60 mm inside -Weight: 30 kg

Oscilloscope -100-240 V 50-400 Hz -Dimensions: 390/430/H135 mm -Weight: 7 kg

Jenbacher 320 spark plugs are available for sale Brand new, still in factory packaging 4 plugs in each box Sealed box Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Sawblade tiltable: 0-45 ° Length of the rolling table: 3.200, 3.800 mm cutting width: 1.300, 1,500 mm Motor output: 7,5 kW Cutting height: 177 mm Cutting height at 45°: 133 mm Saw blade diameter: 500 mm Speed: 3000/3600/4200 U/min. work height max.: 870 mm Dust suction hood: 1x120, 1x100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Hight: 1420 mm, Weight: 4200 Kg

Submersible Flygt 3201.091-9980003 Power: 30 kW / 400V Weight: 490 kg Individual sale possible

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

Jenbacher 320 Stamford AC Generator Manufacturer: Jenbache Model: 320 Alternator Year of manufacturing: 2003 Rated Output Power: 1330 KVA Speed: 1500 RPM Voltage: 400 V Frequency: 50 Hz Phase: 3 Condition :Used Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Jenbacher 320 Empty containers 2 UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Ideal for Jenbacher 320 generators Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please write to us at Infoukpowergeneratorsltd for further information on arranging viewing or pricing details. ~ UK Power Generators Ltd Enquiries@ukpowergeneratorsltd.com 00447956518924

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used High Quality Bystronic pressbrake 6-axis for a sale.

cutting diameter: 320 mm saw band length: 4570 x 27 x 0,9 mm table height: mm cutting width: 450 x 280 mm power capacity: 4,0 kW cutting speed: 15 - 105 m/min engine: 380 V total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell 3 x Nvidia DGX A100 320GB system Each configured with: 8 x A100 GPUs, each 40 GB This is not a normal server. It is a ready-to-use, turnkey system for AI research / training, HPC, LLMs simulations and more. This is a supercomputer in one rack. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nor ...

Bezel, setting stick, lynette -Max. passage: Ø 320 mm -Peak height: 315 mm -Technical drawing: see photos -Dimensions: 100/420/H600 mm -Weight: 33.7 kg

Code: 0395 Brand: JOWAY - TAIWAN Model: P - 3200 TA - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of panels, furniture, doors, window and door frames, kitchens, plastics, composite materials and various – CE Standard Technical data: Anodised aluminium caqrriage length 3200 mm Dimensions of ground steel table mm 620 x 1000 Blade diameter 350 mm Hole 30 Max cutting height at 90° mm 100 Max cutting height at 45° mm 70 Motor power 7,5 Hp Speed rpm 3000/4000/5000/6000 Scoring unit blade diameter 120 mm Hole 22 - Motor power 1 Hp Dual control panel for machine start-up Electric blade lifting Programmed blade tilt Electrically adjustable scoring unit Parallelogram blade guard Overall dimensions of assembled machine mm 3200 x 3400 x 1400 h Overall dimensions for transport mm 3200 x 2100 x 1400 h Weight kg 1300

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

BOMAR Ergonomic 320.250 G metal band saw was built in 2011 in the Czech Republic by BOMAR, spol. s r.o. The machine is designed for precise cutting of workpieces at an angle of 0°, +45° and +60°. The machining is performed by a robust saw blade driven by an electric motor with worm gear, which operates in an oil bath. In order to ensure precise guidance of the saw blade, it is mounted in tapered roller bearings with pre-clamping. Secure clamping of the workpiece during cutting is ensured, in turn, by a quick-clamping vice. The BOMAR Ergonomic 320.250 G is distinguished by its extremely stable design based on a robust arm, which is raised manually and lowered under its own weight. The arm’s descending speed is adjustable via a hydraulic cylinder with flow valve. The combination of high cutting precision with simple operation and reliable components makes the Ergonomic 320.250 G ba ...

Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Registerstanze - Index Cutter Hunkeler RE 320 Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Inv. Num. : 7997 Type: SC 3200 Producer: TITAN Created: GO 2020 Parameters: Control system: Sinumerik 840D SL Table diameter: 3000 mm Max. turning diameter: 3300 mm Motor power: 55 kW Max. workpiece height: 2260 mm Max. workpiece weight: 18000 kg Maximum table speed: 92 1/min Weight: 48000 kg

For sale is a radiator module from JCB with intercooler and engine radiator from 2021, the radiator is unused. Condition: as good as new (only test run in the factory) JCB Part Number: 320/04847 Total Part Number: MN422200-03300B Case Part Number: MN122110-6013 Water Chiller Part Number: MN422135-0410 Intercooler Part Number: MN127100-4310 F4KAKT1845 Intercooler also fits John Deere and Yanmar We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!

Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...

AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...

Key data: 45 °, 3200 mm, 1200 mm

Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

a mobile (tracked) crushing and screening plant

A repairable Océ/Canon large-format monochrome plotter requiring repair is available. Print resolution: 600dpi, max. print speed: 2.74m/min, max. print width: 914mm, max. paper size: A0, max. roll length: 152m, max. output length: approx. 15m, scan resolution: 400dpi. Machine dimensions X/Y/Z: approx. 1400mm/1050mm/1300mm, weight: approx. 200kg. The mechanical system is defective. Documentation available. An on-site inspection is possible.

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 373 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 320 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 460 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/detroit-diesel-8v92ta-generato r-320kva-used/203, , = More information =, , Empty weight: 4.300 kg, Type number: 8V92TA 8083-7405 GENERATOR 320KV

- Face plate 4 Chuck 3200 mm - Displacable table for swing 5100 mm - ATC tool chnager 16 positions - Heavy Duty Jaws - Table load 60.000 Kg - Power 75 kW   - ex Aero Space  - SCR Feed drives / each Axis own  - Ballcrews + Slide roller guideways -  Displaceable table hydraulic / manuel  - Circular interpolation 

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg

For sale: GE Jenbacher JMS 320 GS-C cogeneration unit in good overall condition, available for dismantling. The unit is equipped with a Stamford AVK PE734E2 alternator rated at 1,770 kVA and can be supplied with its main auxiliary equipment, including electrical control cabinets, the GE Jenbacher DIA.NE XT control system, cooling circuit, dry coolers, pumps, piping and associated accessories. Main Specifications Manufacturer: GE Jenbacher Model: JMS 320 GS-C Year: 2011 110000 H Electrical Output: 1,067 kW Speed: 1,500 rpm Fuel: Natural Gas (can also be configured for biogas applications) Alternator: Stamford AVK PE734E2 Alternator Rating: 1,770 kVA Voltage: 400/231 V Frequency: 50 Hz Available Equipment Complete cogeneration unit Stamford alternator Electrical control cabinets GE Jenbacher DIA.NE XT control system Complete cooling system Dry coolers Pumps and pip ...

- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling  - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.