cat 320 used for sale

; Power [PS]: 88; Gross weight [kg]: 950; Engine: CATERPILLAR 3204DI

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 21165 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 320 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 462 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/caterpillar-3406b-generator-32 0-kva-used/289, , = More information =, , Empty weight: 5.100 kg, Type number: 3406B GENERATOR 320 KVA

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 105.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 146 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/204255, , = More information =, , Type: Engine, Empty weight: 1.000 kg, Type number: 03Z-4W0860

Engine Brand: CATERPILLAR, Conditie: USED, Nominal Power @ Nominal Rpm: 316.9 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 317 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/294203, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 990 kg, Type number: 01Z-7E0425

Engine Brand: CATERPILLAR, Conditie: USED, Nominal Power @ Nominal Rpm: 175.2 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 235 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/294204, , = More information =, , Type: Engine, Empty weight: 945 kg, Type number: 01Z-2W1320

Engine Brand: CATERPILLAR, Conditie: USED, Nominal Power @ Nominal Rpm: 105.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 1221 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Rated Power: 175 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-03z-4w086 0-used/22409, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 03Z-4W0860; Transport weight [kg]: 1150

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 105.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 146 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-03z-4w086 0-used/22385, , = More information =, , Type: Engine, Type number: 03Z-4W0860; Transport weight [kg]: 1000

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 116.3 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-01z-1w590 0-used/720, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 01Z-1W5900; Transport weight [kg]: 1050

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 175.2 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 3045 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 280 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-01z-2w132 0-used/42314, , = More information =, , Type: Engine, Type of fuel: Diesel, Emp ...

Reconditioned Caterpillar 3116 long-block engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 45V; Gross weight [kg]: 950; Engine: CATERPILLAR 3204

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 18221; Gross weight [kg]: 18221; Engine: C32 (Remanufactured by Cat); Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 9000; Gross weight [kg]: 9000; Engine: C32 (Remanufactured by Cat ); Accessories: Product features:, Switch board, Volt meter, Amp meter, Hertz meter

Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Hydr. Hacksaw (Made in Croatia) Type BS 320Year of construction approx. 1980Saw range Round 320 mmSaw area Square 280 x 280 mmSaw blade 550 x 45 x 2.25 mmMaterial Inlet height 680 mmSaw speed 42 - 55 - 85 - 110 strokes/min. Motor power 1.8 and 2.4 kW Pole switchableMains connection 400 volts, Hz- Mitre adjustment up to 45- Saw motor with 2 speeds and 2 V-belt steps- Hydraulic saw bracket lowering- Hydraulic cutting pressure adjustment via throttle valve- Coolant device in the

Inert gas welding machine, arc welding system, MIG/MAG welding system -max. welding power: 320 A -4-roller drive -Water cooled -Wire feed: separate, mobile -Accessories: hose package, ground cable, gas fitting -also suitable for robots -Quantity: 1x piece available -Dimensions: 1155/500/H1030 mm -Weight: 263 kg

Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

REF-2305-2306-2307 PEACH STONING AND HALVING MACHINE FOODTECH 320 APA Stoning and halving machine for peaches. Manufacturer: CTI FoodTech Model: 320 APA Year: 2014 Automatic continuous orientation system. Stoning system with rotation of the blades driven by a high-revving motor. Automatic lubrication system. Output: up to 320 pieces/min (approx. 3,000 kg/h) Installed power: 3 kW/4 HP Infeed height: 1,200-1,070 mm Outfeed height: 490-590 mm Overall dimensions: length 5,238-5.763 mm; width 1,810 mm; height 1,930 mm Net weight: 2,100-2,300kg Water consumption (40 psi): 35 l/min

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

320 ton x 4100mm

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Format sliding table: 3200mm Engine power: 400V 5.5 KW (7.5hp) Cutting height: 125mm Saw blade: 300-400mm swivel: 90-45 electrically pivotable and height-adjustable Industrial scoring unit for 120mm scoring saw blade Parallel cutting width: 1500mm

Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

- P-500-50 - P-320-50M

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

Working Length: 3200 mm

10 pcs spiral drill 17 x 320 mm lg. (total) more: 17.25 x 320 mm lg. 17.00 x 350 mm lg.

IP 320 with feed belt outdated

Worm gearbox with motor - FLENDER CEUA320 - see pictures

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Double chamber vacuum packaging machine Komet SD 320, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg

Key data: 588

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. These generators were only run on natural gas. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 3,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine, alternatzr, frame, control panel, switch panels, gas line, radiators, wiring and other accessories. Price ...

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

FOR SALE. USED 320 CYLINDER HEADS. FIRST TIME OF THE ENGINE. THESE HAVE NOT BEEN RECONDITIONED BEFORE AND ARE READY TO BE RECONDITIONED AND USED AGAIN. NO CRACKS, NO DAMAGE. IN VERY GOOD CONDITION AND CLEAN AND PRESSURE TESTED. WE HAVE 40 PCS. PRICE ON REQUEST. EX-WORKS UK WE ALSO HAVE 320 BLOCK, CRANK SHAFT-2 PCS IN EXCELLENT CONDITION AND MANY OTHER USED 320 PARTS FROM DISMANTLED/DECOMMISSIONED ENGINES.

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

Brand new, not yet unpacked Seifert Soultherm Peltier TG-3200 3200303 24VDC Useful cooling capacity L35L35200 W Permissible Operating Temperature-20°C - 70°C UL Temperature Range-20°C - 65°C Air volume flow (system / free-blowing) Ambient circuit: 120 / 260 m³/h Cabinet circuit: 120 / 260 m³/h Mounting typeSemi-installation Dimensions A x W x C (D+E) A = Height | B = Width | C = Depth 400 x 180 x 170 (79+91) mm Weight10 kg Cut-out dimensions370 x 155 mm Voltage / Frequency24 V DC Rated current L35L3511.3 A Starting current16.9 A Max. Rated Current12.9 A Rated power L35L35270 W Max. rated power311 W Back-up fuse18 A (T) Connection TypeConnection Terminals

The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal

EUROMETAL HGS 6×3200 NC hydraulic guillotine shears built in 2012 are used for precision sheet metal cutting with a maximum thickness of 6 mm. The machining process is performed by precision cutting knives with an option to adjust the gap between the blades while the upper cutting knife is mounted on a swing beam. This solution allows the machining of both steel sheets and workpieces made of non-ferrous metals. The simple design with efficient hydraulic system additionally ensures trouble-free operation throughout the entire lifetime, while at the same time maintaining the highest cutting quality. The EUROMET HGS 6×3200 NC guillotine shears weigh approximately 6600 kg. Technical specifications of the EUROMETAL HGS 6×3200 NC guillotine shears - maximum workpiece length: 3200 mm - maximum workpiece thickness: 6 mm - cutting angle: 1°30′ - stroke rate: 14/min - cutting blade l ...

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill