caster used for sale

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Qty. 1 Second-hand Twin-Roll aluminium strip caster Manufacturer: Castal Ltd. Built: Type: MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster Cast Strip Width: 1350 mm max 53.15" Cast Strip Thickness Max.: 12.0 mm .472" Min.: 4.2 mm .165" (4.2 mm achieved by production, not just design capacity) Casting Speed: 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved Caster Configuration Horizontal: 15 degree tilt

QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Surface: PU -Wheel size: O 170 x 75 mm -Inside: O 55 mm -Inside: O 85 mm cone -Price per piece -Quantity: 2 pieces -Weight: 7.3kg/pcs

DIMENSIONS: 4310 x 2032 x 660 MM & 4953 x 2032 x 660 MM,

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 80 mm -Inside: Ø approx. 17 mm -Price: per piece -Number: 4 piece -Weight: 1.5 kg/piece

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete -Weight: 2 kg/piece

Line is equipped with the following: • 25 ton EAF w/356mm electrode & 16 MVA trsfmr (rblt 2006) • 25 ton LF w/305mm electrode & 3 MVA trsfmr new 2006 • 25 ton VOD/VAD w/305mm electrode & 3 MVA trsfmr23297 • 2-Strand VAI Caster new 1990's: Hand & Auto Controls 6 ton tundish (ladle) movable crystalizer electromagnetic stirrer • 8 ton ESR (2 pillars) w/4MVA transformer will produce 1 to 10 ton ingots • Dust collection system • 12.5 ton charging cranes • 50 ton ladle cranes • 12.5 ton service cranes • ingot moulds • ladles

Meltshop Consists of: 1. 70 Ton EAF (Electric Arc Furnace) • revamped in 2009 by SMS-CONCAST; • Type AC, Shell Type EBT, diam. 5.400 mm; • Tap weight 63 Ton; • Tap-to-Tap-Time 42 Min; • 100% Scrap Charge; Electrode diam. 550 mm; • Electrode Regulation; • Upper Shell Water-Cooled Panels (Steel + Cu); • Arms design Conductive (copper cladded); • Scrap charge with 3 buckets 2. 65 Ton LF (Ladle Furnace) TAGLIAFERRI”; Tap Time 42 Min. 3. MATERIAL HANDLING SYSTEM, Conveyors and Hoppers 4. CONTINUOUS BILLET CASTER STS” revamped in 2008; • 4-Strands; • 5 meter Radius; • Billets 130 x 130 mm; • Automatic start and mould level control; • Oscillation with AC motors and variable oscillation frequency; • Water automation of primary and secondary circuits; • Heavy Duty Straighteners; • Upgraded roller table and tra ...

The basic machine PEWO Pack 250 compact comprises the following assemblies: - Alarm and status display of the machine in plain text format - Servo technology - Product-adapted control of all servo axes, selectable via recipes on the HMI - Film monitoring, advance warning with visual and acoustic display as well as machine stop at the end of the film or film tear - Closing beam driven by servo motor and spa operation - Pneumatically controlled hold-down device at the outlet - Height adjustment of closing beam and hold-down device - Sealing unit - Low-wear sealing system due to Teflon-coated sealing bar with precise temperature monitoring - Cylinder monitoring with fault indication on the HMI - Protection class IP 54 - Product protection, closing area secured by means of a light barrier - Shutdown monitoring for the treadmill with automatic restart - Pitometer switch with pot ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Transport armored castors - frame for presses automatic lathes laser etc. 1 x Swivel caste set and 2 x fixed castor Large version 10 - 18 to Frame has been serviced , and is smooth. Condition : Very good . A tank caster frame that makes you happy. Says Pradler Maschinen Service

1,800,000 TPY Mini mill for slab and hot rolled coil Tonnage per year 1,800,000 tons Type Slab + Strip in Coils Manufacturer SMS Caster type Curved and Straight Material size (Slab size): 55mmT x 900~1,560mmW x 20,000~43,000mmL 210mmT x 600~1,890mmW x37,790mmL Rolling Mills 4 Hi 6 Stands -Product size(coil): 1.4~16mmT x 900~1,560mmW - 28ton/roll And more machinery Please refer to the attached flyer for more details

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 80 mm -Inside: Ø approx. 20.3 mm -Weight: 1.4 kg

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 85 mm -Inside: Ø approx. 11 mm -Price: per piece -Number: 5 piece -Weight: 1.5 kg/piece

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Jungheinrich, roller -Wheel size: Ø 85 x 75 mm -Inside: Ø approx. 25.2 mm -Price: per piece -Number: 3 piece -Weight: 1.1 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, caster, pallet truck castors -Manufacturer: Wheels-Vogel, heavy-duty bike -Wheel size: Ø 85 x 100 mm -Inside: Ø approx. 25.5 mm -Weight: 1.3 kg

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Acla, heavy duty bike 2 pcs. -Wheel size: Ø 85 x 115 mm -Inside: Ø approx. 25.6 mm -Price: complete -Weight: 2.1 kg/piece

Round and long caster SUPERBA Model: SU Compact Combined circular and long knitting in one machine long effective channel 2500 mm max. bread length 500 mm Weight range 500 to 2000g Machinery on the move Capacity 800 - 2000 pieces/h with extra flour Connection 400V, 3 kW, 16A-CEE plug Dimensions: 2000 x 960 x 3500 mm, HxWxD Used machine overhauled 6 months warranty Many more bakery machines in stock!

Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.

Description: Unused , max load 454 kg , platform 590 x 715mm height to 3480mm , telescopic mast , caster wheels Approx. Onsite Dimension. (l x w x h): 2,200 x 2,000 x 2,050 mm, weight approx.: 120 kg

Description: Unused , Max load 363 kg, platform 590 x 715mm height up to 5000mm , telescopic mast , caster wheels Approx. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 2,050 mm, weight approx.: 130 kg

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

EFI VUTEK LX3 PRO DS DIGITAL for Point of Presentation 8 col. Perfect your POP print business The EFI VUTEk® LX3 Pro printer is designed for POP productivity and packed with innovation only available from EFI™. Versatile 3.2 meter hybrid flatbed/roll-fed printer prints on materials up to 2 inches (5.08 cm) thick Lowest total cost of ownership in its class Eight colors plus white and multilayer printing Resolutions of true 600 or 1000 dpi Features 12pL grayscale print technology Powerful LED technology Eight colors plus single-pass multilayer and white ink printing Resolutions of true 600 or 1000 dpi 12pL grayscale print technology Powerful LED curing technology Continuous print productivity with less than five seconds between boards for faster job turns Standard multi-queue on-demand functionality for multi-job printing Multi-roll capable – two 60 in (152 cm) r ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - fo ...

sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer  ...

The C500 sub-vacuum consists of a double bell to optimize the packaging process. It allows the packaging of products under vacuum and in a protective atmosphere. Each bell has 2 welding bars. TECHNICAL DETAILS: - Machine dimensions (d x w x h): 1050 x 1600 x 1065 mm. - Bell dimensions (d x w x h): 745 x 650 x 200 mm. - Weight: 650 kg. - 4 casters including 2 directional - Synthetic loading plates for the bell. - Bell in standard execution. - Bell cover for bell height 200mm. - 2 parallel weld bars, l = 650 mm, front and rear. - BUSCH pump of 250 m3 FEATURES: - Auto shut-off function with boiling point recognition. - Fully graphic display - Emergency vacuum stop - Intuitive operation - Accurate vacuum measurement via vacuum detector - 18 selectable languages - Program brief for 29 recipes.

Puller trolley with 12 pullers for 220cm deep oven Partly NEWused puller trolleys stainless steel on casters 2 of them with brakeCar profile 40x40mm12 pieces Puller 5 Puller NEW 7 Puller used with NEW clothsTrolley External dimensions : W: 251cm D: 62cm H: 181cmInterior dimensions : W: 243cm D: 62cmPuller dimensions : W: 240cm D: 58cmDetails see picture 

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

Pullers with puller trolley for 160cm deep oven NEWused puller trolley good condition stainless steel on casters with 15 pieces New ALU pullerstrolley External dimensions : W: 203cm D: 62cm H: 190cmPullers for 160cm deep ovenPullers dimensions : W: 194cm D: 58cm Height : 4cm The price is for 15 pullers and trolleysWe have different size pullers in stock Details see picture 

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, includi ...

Pullers with puller trolley for 160cm deep oven NEWused puller trolley good condition stainless steel on casters with 12 pieces New ALU pullerstrolley External dimensions : W: 209cm D: 67cm H: 188cm12 pieces Pullers made of ALU Pullers for 160cm deep ovenPuller dimensions : W: 200cm D: 58cm Height : 4cm Do we have different size pullers in stockDetails see picture 

sheet width: 3220 mm plate thickness: 2,0 mm daylight opening: 160 mm adjustment: 80,0 mm bending angle max.: 120 ° total power requirement: 4,0 kW weight: 3.965 kg range L-W-H: 4575 x 2450 x 1550 mm Furnishing: - Motorized universal folding machine for single and series production - rotating upper beam / as an automatic tool changing system Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 with touch screen control panel Color display USB interface automatic cutting calculation Materials and tools library precise bending simulation - Servo converter controlled drives for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : Station 1: 1x pointed rail Station 2: 1x split goat foot tool - Free-moving double  ...

Used dough divider / bread roll press EBERHARDT, Type: Optimat - including 4 casters - Maximum dough layer: up to approx. 3,200 g - technically tested and cleaned - immediately ready for use The machine is in good condition and ready for immediate use. Viewing and test run are possible by arrangement.

sheet width: 3020 mm plate thickness: 25,00 mm no. of strokes: 4 - 8 Hub/min back stop - adjustable: ca. 1250 mm work height max.: 1040 mm Control: SC 70 cutting angle: 0,5 - 3,0 ° down holder: 18 Stück engine output: 56,0 kW weight of the machine ca.: 38.000 kg range L-W-H: 4200 x 2600 x 2650 mm good condition - ready to use (!) New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 200 programs x 127 sets per program Material library max. 32 materials programmable positioning from the backgauge automatic electro-hydraulic cutting gap adjustment automatic electro-hydraulic cutting angle adjustment automatic retraction from the backgauge automatic and manual programming mode Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra ...

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5697825Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 2550 mm plate thickness: 4,0 mm distance between columns: 2600 mm back stop - adjustable: 750 mm no. of strokes: 42 Hub/min cutting angle: 1°30 table width: 450 mm table height: 800 mm total power requirement: 7,5 kW weight of the machine ca.: 3230 kg dimensions of the machine ca.: 3200 x 2300 x 1350 mm Current new price with special accessories ~ 33.000 euros from a maintenance workshop / good condition () Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 Control unit with touchscreen function 128 MB internal memory (programming possible) Multilingual (English, Turkish, German) INCH/metric conversion - manual cutting gap adjustment, from the front analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball ...

Manufacturer : KemperType : Imperator II MB-with stainless steel funnel-mobile on casters See picture for details

Description: Suitable for wet cleaning of industrial floors including tiles, epoxy etc. With the perfect balance Between maneuverability and productivity, the Mini-HD simplifies and enhances your cleaning. This medium sized walk behind scrubber offers battery pack options., New price in 11/2017 was 12,000,- EURO, the machine has been serviced annually and is technically and optically in an as new condition. Accessories: Battery Charger, chassis construction: Steel 4.8 mm powder coated, Front wheels (Ø × width): [2×] 25.4 × 6 cm - Black, Rear casters (Ø × width): [2×] 10 × 5 cm - Anti-Mark Gray, Size (L×W×H): 132×55×101cm, Weight (without batteries): 178-201kg, Weight (with 210Ah batteries): 284 - 306 kg, disc dimensions: Ø 66 - [2×] 33 cm, Includes jaws with rollers for wall protection: Ø 71 - [2×] 35 cm, disc motor: 270 rpm [2×] 551 W, Cylindrical dimensions: 63 - [2×] ...