cast film used for sale

Heavy-duty casters, heavy-duty wheel, tires -Roll size: Ø 200 x 50 mm -Inner diameter: 20 mm x 64 mm -Price: per piece -Quantity: 2 wheels available -Weight: 4.5 kg/piece

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor, -Payload: 1,000 kg -directable -Brake -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 6x bikes available -Price: per piece -Weight: 10 kg/piece

Transport rollers, wheels, casters, carrying rollers -comes from a grandstand complex -Roller diameter: 125 mm -Number: 92 sets of rolls available -Price: per piece -Dimensions: 355/135/H50 mm -Weight: 2 kg -Unfortunately, no information is available regarding load-bearing capacity.

Heavy-duty roller, support roller, stop roller, guide roller, carrying roller -Heavy-duty roller: Stop roller, support roller, solid design -Roll:: Ø 85 x 100 mm -Hole spacing: 140 x 85 mm -Quantity: 7 rolls available -Price: per piece -Dimensions: 180/125/H135 mm -Weight: 7 kg/piece

Heavy duty swivel castors PAGUS with parking brake wheel diameter: Ø 300 mm wheel width: 90 mm plate dimension: 215 x 215 mm plate thickness 18 mm distance (hole center-hole center) 175 mm New ! Without brake S359 Dimensions: 400 x 400 x 340 mm Weight: 42 kg

Track roller, swivel roller, transport equipment roller, fixed roller -Manufacturer: Tente, swivel castor -Wheel: Ø 80 mm -Width: 60mm -Hole spacing: 105 x 78 mm, Ø 11 mm -Quantity: 11x swivel castors available -Price per piece -Total dimensions: 150/110/H135 mm -Weight: 3.3 kg/pc.

Heavy Duty Swivel Castors PAGUS Wheel Diameter: Ø 300 mm Wheel Width: 90 mm Panel Dimension: 215 x 215 mm Plate Thickness 18 mm Distance (Hole Center-Hole Center) 175 mm New ! Without brake S358 Dimensions: 400 x 320 x 340 mm Weight: 37.4 kg

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: with lock/brake -Wheel: Ø 125 mm -Width: 32 mm -Hole spacing: 78 x 60 mm / Ø 10 mm -Number: 216x swivel castors available -Price: per piece -Dimensions total: 175/80/H155 mm -Weight: 1.1 kg/piece

Manufacturer: Bürkle Lackgiessanlage, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: links, Working height: 920, Pump system: Rührwerk, FREE TEXT: bald verfügbar,

Castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: solid rubber with steel rim, 2 pieces -Load capacity: 100 kg -Wheel: Type 125/37.5-50 Ø 125 mm -Width: 37 mm -Shipping/Price: complete -Dimensions each: 140/105/H155 mm -Weight: 1.2 kg/piece

Caster, swivel caster, transport equipment caster, fixed caster, furniture caster -Swivel caster: with locking mechanism/brake -Wheel: Type Ø 100 x 32 mm -Thread: M12 -Quantity: 15x swivel casters available Price: per piece / Minimum order 4 pieces -Dimensions: 163/60/H150 mm -Weight: 0.6 kg/pc.

Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Manufacturer: Purete, Type: PRT-L2213, Year: 2020 neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Operating side: rechts / links, Working height: 880, Feeding speed min/max: 70, Feeding belt mm: 3.000, Outlet conveyor mm: 3.000, FREE TEXT: höhere Geschwindigkeit gegen Aufpreis möglich, Year :2020 neu

Manufacturer: Purete, Type: PRT-L1106, Year: 2020 neu, Control: HMI, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 2 - 100, Working widht max mm: 620, Operating side: rechts / links, Working height: 880, Feeding speed min/max: 2 - 80, Required space L x W x H mm: 2.800 x 2.200 x 1130, FREE TEXT: höherer Vorschub optional, Year :2020 neu

Caster, swivel caster, transport equipment caster, fixed caster -Manufacturer: Tente, swivel caster with locking mechanism/brake -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available Price: per piece -Overall dimensions: 170/85/H130 mm -Weight: 0.9 kg/pc.

Caster, swivel caster, transport equipment caster, fixed caster -Swivel caster: Polyamide -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available - Price: per piece -Overall dimensions: 145/85/H130 mm -Weight: 0.8 kg/pc.

Manufacturer: Giardina, Type: Giessmaschine, Control: no, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 120, Operating side: links, Feeding belt mm: no, Outlet conveyor mm: no, Pump system: ohne, FREE TEXT: auf Rollen,

Qty. 1 Second-hand aluminium foundry – still on foundation Mfc.: Gautschi, ZAM Kęty, Konwent, Remix, Foseco (Poland), Santas Built: 2000 – 2008 Still on foundation Entry material: Aluminium scrap Final product: 9”, 228 mm Billets diameter Scope of supply: Grid-frequency induction furnace PIT1500 manufactured by ZAM Kęty with a capacity of 1.5 tons plus a transformer Medium-frequency induction furnace PIT 2500 manufactured by ZAM Kęty with a capacity of 2.5 tons plus a transformer Kowent MB-M-(5-60) B sweep dust collector Holding furnace manufactured by Remix BSG-10/15 with a capacity of 15 tons Foseco FDU MARK 10 refining unit Horizontal Continuous Casting Machine manufactured by GAUTSCHI, Log length 7.0 m Log Homogenising Furnace manufactured by SANTAS Makina, Model ALLOGENIZER-2500-GS

Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weightapprox: 600 kg

Caster, swivel caster, transport equipment caster, fixed caster, double caster -Manufacturer: Dörner & Helmer, 4 pieces swivel caster double caster with plate and brake -Type: 778310 -Wheel: Ø 50 x 19 mm rubber -Submission/Price: complete -Dimensions each: 110/60/H75 mm -Weight: 0.4 kg/pc.

Flight-case RACK 6U long Auction-ID: A1-50934-10

Auction-ID: A1-50656-12

Auction-ID: A1-51213-26

1 set of heavy-duty castors Fabr. YALE, roll diameter 80 mm 1 x swivel castor, 2 x strarr castors little used

equipped with a ladle; mold; shovel; including carrying case; Auction-ID: A1-50707-188

parts of which are disassembled; Auction-ID: A1-50707-163

nylon; height 25 cm; wheel diameter approximately 20 cm; Auction-ID: A1-50707-236

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250,  ...

Materials: CPP // Film Width (Max): 2800 mm

Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra die casting machine, TR330x10, 11505195.10, Druckguss Servive, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr330x10, 2x590x275x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Alstom 3 Phase Cast Resin Transformer TTG 1020-4 transformer from 2002, complete (closed module). 1 available 21 KV / 400 V, 50 Hz Manufacturer: Alstom Model: TTG 1020-4 Type: Cast resin transformer Coil Material: Copper Serial Number: 425427/1 Power [kVA]: 1,000 Input [KV]: 21 / 20.5 / 20 / 19.5 / 19 Output [V, A, Hz]: 400 / 1,443 / 50 Around [kV]: 24 Rated current [A]: 28.87 Year of Make: 2002 Weight [kg]: 4.590 Dimensions LxWxH [cm]: 170 x 120 x 190

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg