cast film used for sale

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

Qty. 1 Second-hand Twin-Roll aluminium strip caster Manufacturer: Castal Ltd. Built: Type: MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster Cast Strip Width: 1350 mm max 53.15" Cast Strip Thickness Max.: 12.0 mm .472" Min.: 4.2 mm .165" (4.2 mm achieved by production, not just design capacity) Casting Speed: 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved Caster Configuration Horizontal: 15 degree tilt

Casing for cooked and boiled sausage without smoking. Remaining stock approx. 3 pallets

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

the 200l barrel original is locked

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

AC - DC - TIG welding machine, make CASTOLIN - EUTECTICType Castowig 200 GW, machine -No: 3704, year of construction 1990DC and AC versionTechnical specifications:Power range: 5 - 250 A60% ED at: 250 A100% ED at: 200 A.Degree of protection: IP 21Cooling method: FInsulation class: FExternal dimensions: 1100 x 530 x 800 mmWith- water-cooled version- TIG hose package with torch- Earth cable with clamps- manometer- Mobile version- TIG and stick electrode weldingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined automatic pharmaceutical machine : case packer (case packing unit) + palletizer Brand : PESTER Model : SLP 2K Year : 2010 Capacity: up to 8 cartons/min Case packing: shaping, filling, taping on the case Palletizing: Kuka robot arm - Positioning, case control on pallets. Pallets 1200 x 800 and 1200 ? 1000 Sizes Case Size Mini / Maxi: 230 x 230 x 170 mm / 450 x 320 x 320 mm Max. pallet height: 1400 mm Carton size at machine input min/max : 30 x 12 x 66 mm/ 440 x 150 x 250 mm

Spindle swivel: Yes -45 to 45Â; Height adjustment: electric; Swivel adjustment: electric; Stop adjustment: manual; Altitude display: digital; Swivel angle display: digital; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine brake: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust design Smooth running thanks to precision units and high dead weight Standard with right-counterclockwise rotation and electronic blocking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is carried out easily and conveniently from the machine side Standard with MK 4 interchangeable spindle system La ...

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Spindle swivel: Yes -45 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Stop adjustment: manual; Altitude display: mech. Counting display; Swivel angle indicator: mech. Counting display; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine brake: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust design Smooth running thanks to precision units and high dead weight Standard with right-counterclockwise rotation and electronic blocking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is carried out easily and conveniently from the machine side Standard with MK 4 ...

Manufacturer : CERMEX Model: SL2100 Type: Case packer Year : 1990 Automatic machine for product grouping and case packing Side-loading case packing with taped closure Adjustable format changeover Previous format : Length: 398 mm Width: 260 mm Height: 315 mm   Mini / maxi cases: to be confirmed according to specifications Mini / maxi cartons: to be confirmed according to specifications

Relief powder system Caslon Mini Supa Duchess; good condition; cleaned and tested; with an investor, which is sold as defective because parts are missing; Working width 330mm; Vibration function. Thermography machine Caslon Mini Supa Duchess; good condition; cleaned and checked; with feeder which one will be sold als spare part becuase of missing parts; working width 330mm; Joggers.

Thickness planer Casadei R51/ H3 Year of construction 1997 Manufacturer Casadei / Busselato Italy S/N 97-61-053 Working width: 510 mm Working height Max.: 300 mm Workpiece length min.: 250 mm Working height min.: 4 mm Maximum cut depth: 8 mm Table length: 860 mm Variable feed speed : 6 / 9 / 14 /22 m/min Knife sizes 4 pieces 510 x 35 x 3mm ( standard knife ) Knife head diameter: 120mm Knife head speed RPM 4600 Main motor: 5.5 kW Dimensions: 1120x960x1250 mm Weight: 643 Kg Electromotive height adjustment Feed roller on the table

We sell 1.) Used: 356 x Casio IT G500 / C21E-C, incl. battery 88 x 1slot transmitter / charging stations, used 60 x 5slot charging stations, used 2.) Brand-new in unopened original packaging, NIB: 214 x Casio IT G500 / C21E-C, without battery 8 x 1slot transmitter / charging stations, new 35 x 5slot charging stations, new In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade,  ...

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2300 mm; Hollow pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: pneumatic; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: digital; Feed speed: 5/8/12/18 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: articulated; Table rollers: no; Motor power: 7 kW; Engine brake: yes, automatic; Suction port: 160mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 980; Stable steel-cast iron construction Large, ribbed dressing tables made of grey cast iron Smooth running due to high dead weight Four feed speeds Motorised thickness table stroke with two speeds and digital display Link pressure bar in the infeed 4-knife shaft, precision-bearing H ...

Tilting Lifter San Cassiano ER 2 Year of construction: 2006 Condition: checked & cleaned Suitable for San Cassiano bowls Motorized bowl discharge Incl. Mesh fence with safety switch

sliding carriage length: 3200 mm; cutting width with rip fence: 1270 mm; Max. cross cut width left from saw blade: 3200 mm; Max. cutting height 90°: 140 mm; Max. cutting height 45°: 99 mm; scoring unit: yes; height adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: motorized; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: scala; saw blade diameter: 400 mm; saw blade speed: 3000 - 4000 - 5000 U/min; motor power: 7,0 kW; motor brake: yes / automatically; suction connection: 80 mm / 120 mm; machine length: 3600 mm; machine width: 1900 mm; weight: 1600 kg; With swiveling 400 mm saw blade and preheating device. M version with motorized height and angle adjustment of the saw blade. - Sturdy cast steel construction guarantees precision, smooth running and durability - Smooth-runn ...

Carriage length: 3200 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 200 mm; Vorritzer: yes; Height adjustment saw blade: motorized; Swivel adjustment saw blade: motorized; Width stop adjustment: manual; Display saw blade angle: digital; Display cutting height: digital; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7.5 kW; Engine brake: yes / automatic; Suction port: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Stable steel-cast iron construction Large contact surfaces due to standard table extension and extension Grey cast iron saw table Foldable rip fence with fine adjustment and round bar guide Cut-to-length fence, extendable up to 3200 mm, with two folding stops Laterally swivelling saw blad ...

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2720 mm; Adjustment dressing table: lever; Hollow pointed joint adjustment: no; Advertisement for Spahn acceptance: Scala; Display hollow pointed joint: -; Dressing stop angle adjustable: yes; Motor power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of grey cast iron The dressing table adjustment is carried out via a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodised aluminium can be easily moved and tilted from 0Â - 45Â The inclination of the fence can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit an ...

CASI roller conveyor accumulation roller conveyor 3000-687-610 RA1998 Make: CASI Running direction: both directions Roller width (RB): 610 mm Nominal/outer width (NB): 685 mm Length: 3000 mm Stowage space size: 760 mm Roller diameter: 50 mm Roller distance: 75 mm Motor Roller conveyors: Interroll EC100 24V Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC100 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guide one-sided Side guides on both sides Condition: functional and visually good condition Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Conveying length in mm: 3000 Roll division in mm: 75 nominal voltage: 24V Conveyor speed m / s: bis 1,25m/s Jam detection: Lichtschranke Stowage spaces: 4 Roll width in mm: 610 Nominal / outside width i ...

1 - Semi-automatic lower flap folder Manufacturer : Soco System Model: F-100-P Year : 2000 Carton size : Min. carton width: 320 mm Max. carton width: 520 mm Max. case length: 700 mm 2 - Automatic case and flap sealer / Tape sealing machine Manufacturer: Soco System Soco System Model: T-400 5-5-7 Year: 1989 Adhesive top and bottom closure. Capacity: Max. 18/min. Carton size : Mini: 200 x 120 x 95 Max: 550 x 460 x 470

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

This 3-axis CASADEI MATRIX 230 Wood was manufactured in 2018, featuring a robust welded frame with cast reinforcements ensuring vibration-free operation. It includes a mechanically adjustable cast iron feed table and a soundproof protective enclosure for noise reduction. The machine offers a QUICK SET system for rapid, precise adjustments without opening the protective cover. Ideal for precision woodworking, the CASADEI MATRIX 230 machine we have for sale is a significant asset. Contact us for further details.

Working width: 6000 mm Working height: 3000 mm Number of cylinders: 4 St. loading dimensions L x W x H: 7.175 x 1.600 x 3.790 mm weight: 3700 kg Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. EURO Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor m. pump Perkins 3543 E 616T 6 cylinder turbo engine m. pump Clark KBEA Engine is sold as shown. Motor is fully functional Hours of operation: 5255 Comes from 750B case wheel loader

SURFACE PLANER CASADEI DS 510 second hand machine volt. 380/50 working width mm. 510 length of table mm. 2800 cutterblock 4 knives motor power Hp 5,5 net weight kgs. 750

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

Thread splicer machine for veneer type CASATI Z 1000 Volt. 380/50 CE mark : YES

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Hole drill machine for wood Fabr. CASATI MACCHINE Type HF / SuperVertical boring head / boring bar with: 13 drillsDrilling direction: from aboveDrilling depth: 60 mmVertical stroke: 150 mmDrilling beam pivotable forwards by: 90 °Perimeter spacing center-center hole: 32 mmMotor Power Drilling Motor Vertical: 2 HPHorizontal drill head with: 3 drillsHorizontal stroke: 130 mmDrilling direction: from back to front, fixedHole pitch: 32 mmWorktable size: 2000 x 450 mmDrill table adjustment in y-direction: 70 mmMotor Power Drilling Motor Horizontal: 0.25 kWCompressed air: 6-8 barExternal dimensions: 2150 x 1380 x 1780 mmWeight approx: 160 kgWith:- pneumatic material tension (clamping stroke 26 mm)used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display of planing thickness: mech. Counter; Feed speed: 5 / 8 / 12 / 18; Feed roller: steel; Pressure bar: articulated; Pull-out roller: rubber; Table rollers: no; Motor power: 9 kW; Suction port: 150mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 810 kg; Motorized thickness table stroke with two speeds Numerical display for working height Thickness table made of gray cast iron The thickness table is mounted on four large trapezoidal thread spindles, for max. stability and precision Four feed speeds Optionally with two rollers in the thickness table Standard with noise protection and chip protection curtain at the workpiece infeed and outlet Roll contact pressure adjustable Front feed roller with helical gearing Pull-out roller with rubber c ...

Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...

Amperage range maximum: 380 A Amperage range minimum: 0 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id 3178 MAKE Castolin Eutectic TYPE MIG Pulse 4003 HD YEAR 2012 SPECIFICATIONS Welding tower / boom height    MIG Pulse mm Number / Power source in  AMP 380 AMP AMP DIMENSIONS Length 1200 mm Width 700 mm Height 1400 mm

We can offer the following Flat- and satchel paper bag machine. Producer : Biagioni / Castaldini ( Italy ) Type : F 100 Year : 1995 Printer : 3 colour ( 4 colour unit ) Bag width : 80 - 300 mm Cut off : 180 - 720 mm With : Window unit With : 20 form plates With : 40 printing cylinders

Sliding table saw, table saw, sliding table saw Casadei KS/1200 Trolley 1200mm Motor 3kW 400V, 6Amp Tiltable 45 degrees Weight 290 kg

Belt sander Casolin Avant RRT 1100 Machine No. 9632007 Maximum sanding width 1100mm Min/max sanding height 3-150mm Sanding belt size 2150x1140mm Throughput 6-12m/min Required extraction capacity 3500m³/h Motor 11kW 15kW, 27Amp, 380V Transport dimensions: 2000x1900x2100mm (LxWxH), Weight +/- 1350kg With 1st sanding belt, oscillating does not work.

Benchtop milling machine, milling machine Casadei F222L Spindle diameter: 50mm Serial Number: 06T3001 Weight: 891 kg 10 KW 400 V

Veneer scissors Hydraulic Casolin 3100mm Working width 3100mm 4500x1100x1900mm, Weight 2000kg

Benchtop milling machine Casolin F90 Year of construction 1996 Spindle Ø 40 mm 7.5 kW motor Rotation speed 3000/4500/5000/6000/8000/10000 rpm Electric Up/Down 380V, 15Amp Feeder 3 rolls Aigner guide

Casolin Astra 3000 Year of construction 1991 Trolley 3000mm Main engine Scoring unit 45 degrees tiltable 400V

Code: 0184 Brand: CASATI MACCHINE Model: Z 2000 - CE Standard Thread splicer for veneer for high production - CE Standard Technical data: Arm lenght mm 1200 Veneer thickness mm 0,3-3 Feed speed mt/min 10/50 Stepless change of heater, oscillation angular speed, independent of the linear feeding speed Accurate adjustment of the feeding friction pressure Adjustment of the starting point and stop point Thread heating by electric resistance Zig-zag height adjustment Automatic breaking of the thread All functions are operated on the control panel Total electric power Kw 1,5 Overall dimensions: mm 2050 x 600 x 1400 h Weight kg 450

Casadei Xenia 60 format saw sell format saw with scorer and tilting blade little used Year of manufacture: 2018

Used Casadei mc 30/12 Wood CNC machining centre drilling head with 16 bits, joint cutter and pantograph Year 2010