case ih used for sale

Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m 4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the  ...

Working widths: 4600 mm Roller width: 4800 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 24 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling) • New drive can be designed according to case of operation, extra charges: EUR 10000 - 12000 • Guarantee period: 6 months, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 2000 mm turning diameter in the gap: 790 mm turning speeds: 20 - 1800 U/min centre height: 380 mm spindle bore: 80 mm tailstock quill taper MT: 2,8 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 5,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,5 x 1,15 x 1,3 m • 80 mm spindle passage • Gears hardened and ground • manual central lubrication • adjustable main spindle bearings • Overload clutch in the lock case • bed bridge • incl. 3 - axis digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold water high-pressure cleaner, export version with 60Hz Welcome to the innovative and compact me-Class! The DYNAJET 150me with up to 150 bar working pressure convinces not only with its performance but above all with its compact dimensions and high mobility. This makes the versatile high-pressure cleaner one of the all-rounders in our range. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service lif ...

Three-spindle copying and lock milling machine make ROTOX type KF 457Year of construction 1993the ideal machine for lock machining: profile cylinder, pusher holeand lock case on all aluminum and PVC profiles in one clampingMax. Profile width: 125 mmMax. Profile height: 50 mmCutting path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors a: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx.: 180 kgWith- 1 vertical cutter shaft- 2 horizontal milling shaftsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

bore capacity in steel (diameter): 30 mm throat: 198 mm bore stroke: 75 mm : 16 mm spindle taper: MK3 spindle turning speed range: 95 - 2840 U/min : 320 mm : 190 mm table surface area: 700 x 190 mm connected load frequency: 400 V max. distance between table and spindle-nose: 55 - 405 mm total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling capacity: 32 kN : 20 m : 16 mm winch traction in steel case, as good as new pulling power with lever pipe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

Water Chiller DONALDSON ULTRAFILTER SL MODEL ULTRACOOL 0500 SP E6811024-20 Donaldson's Ultracool series water chillers combine high efficiency with low energy consumption, optimizing water use and ensuring process safety. The use of closed-loop water chillers allows water recirculation and ensures the preset optimum temperature. The Ultracool carries the water to the heat exchanger, where a separate cooling circuit cools it. An item that has been used previously. Practically unused. It is fully operational and works as intended. Brand: Donaldson. Product in Stock. Get a shipping and tax estimate by adding the item to your shopping cart. The estimated delivery time will depend on the choiceed shipping service and the receipt of the compensated payment. Delivery times may vary Payment We accept PayPal and all major credit cards. TESTED.: YES In case of malfunction; You h ...

SHORT PASTA LINE 500 KG/HOUR Continuous automatic line for the production of short-cut pasta, used but in good condition. Production capacity +/- 500 Kg./h.  Consisting of : -N. 1 Press Mod. Braibanti type Mabra 3R complete with accessories excluding dies for the various formats - N. 1 Trabatto with 5/7 passages with internal/external stainless steel panelling - N. 1 Pre-Dryer type Teless with food-grade polyester belts on 9 levels x Mt. 6.20 long x H Mt.4 - N. 1 Dryer type Teless with food grade polyester belts on 9 levels x Mt. 10,20 long x H Mt.4 - #1 Final cooler - Elevator belts connecting the various equipment. The dry pasta storage and packaging silos are excluded. In case of interest, we could arrange to find the necessary equipment to complete the plant.

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

Buchdecken-Rundegerät Schmedt Prärund 17-10; good condition; cleaned and tested; Back width max.120mm, min.10mm; Back length max.600mm. Case roundig machine Schmedt Prärund 17-10; good condition; cleaned and checked; spine width max.120mm, min.10mm; spine lenght max. 600mm.

Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg

Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 2 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5697825Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

Electric chain hoist make DEMAG type PK 5 NFabr. -No: 1730966 built in 1970Technical specifications:Load capacity: 500 kgLifting height: 3000 mmMain lifting speed: 10 m / min.With- chain case- single fall 500 kg- control cables- Manual landing gearused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Slide Projector Fabr. LEITZ Type PRADO 500Mash. -No: 270577Outside dimensions approx: 350 x 140 x 250 mmWith- storage case- Operating manual- Guarantee certificate- Aperture for centeringin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

Big-Feeding-case A3, finisher, Apple-Software.

Personal time attendance make Z + M type Argus J 30 PlusFabr. -No: 8383Clock: digital (time, date, day of the week)Accuracy: 15 sec./monthPushbutton: Inkjet blackBackup: 3 months in case of power failureWeight approx: 4.5 kgOutside dimensions approx: 160 x 205 x 128 mmWith- Scannerused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic test case make DUNLOP BTR hydraulicExternal dimensions approx: 325 x 280 x 80 mmWith- 4 pressure displays 25, 100, 250 and 400 bar- 4 connections- Hose connectionsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice ColdJet SDI 60 Select ice blasting machine from 2013 With blasting hose, blasting gun (applicator in industrial design with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler Power supply: 230Volt maximum dry ice capacity of the container approx. 27kg Dry ice consumption adjustable from approx. 0 to 160kg per hour Jet pressure range from approx. 1.4 bar to 17 bar Compressed air requirement depends on the nozzle used The gun with integrated light and the ability to switch between only air and air + ice is very practical The device can be used with 3mm dry ice pellets, or alternatively with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English ...

No. 5135: 1 gebr. Measuring arm Fabr. FARO, type Quantum, Bauj. 2009 with Certificat 2017 Accessories: Transport case Mounting plate Magnetic base plate Certificat Other: Transport size approx. 115 x 55 x 42 cm Weight approx. 50 kg ( estimated )

used chain conveyor belt Manufacturer: EuroTec Type : KB 1400 Technical data: Chain type : M 112 Feed length : approx. 6,150 mm Path length : approx. 9,500 mm Belt width : approx. 1,400 mm Conveying width : approx. 1,300 mm Steel body of the conveyor belt : made of St 37 Drive motor with brake : 5.5 kW Switch EMERGENCY STOP : yes Switch START- STOP : yes Lubrication with drip oilers : electric (MURDFELDT) Side tray heights in the feeding area: approx. 500 mm dto. in the climbing section : approx. 1,000 mm Climbing angle : approx. 30°/-20° Gooseneck : yes lower belt cover in the climbing area up to a maximum of approx. 2.50 m intervention height : yes Material outlet chute : yes Conveyor belt supports : yes technical design of the tape: Drive Manufacturer : Getriebebau Nord Type : Bevel gear jack motor Protection class : IP 55 Chain Type : M 112  ...

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Fine filter insert Corolan, 982mm x D151mm, HC8300FCT39H, Pall, new Attention: Original Pall product, no replica of.. Special price We still have several identical and other such devices, but the quantity is ending. If you buy more than 1 piece, there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely new and in the original packaging. Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into operation upon acceptance. In the event of a defect for which the seller is not responsible, the goods can be returned within 2 weeks. We will only reimburse the buyer for the product price paid to us. For these goods, we must exclud ...

Fine filter insert Ultipor III, 927mm x D137mm, HC8304FKS39H, Pall, new Attention: Original Pall product, no replica of.. Filter fineness 12my Special price We still have several identical and other such devices, but the quantity is ending. If you buy more than 1 piece, there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely new and in the original packaging. Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into operation upon acceptance. In the event of a defect for which the seller is not responsible, the goods can be returned within 2 weeks. We will only reimburse the buyer for the product price paid to us. For t ...

Persian carpet from IRAN Bakhtiar Province Size 438 x 634 cm Age: approx. 80 - 100 years Slight traces of use Valuation report in the present case

Fine filter insert Ultipleat SRT, 1055mm x D152mm, UE619AS40Z, Pall, new Attention: Original Pall product, no replica of.. Filter fineness 12my Special price We still have several identical and other such devices, but the quantity is ending. If you buy more than 1 piece, there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely new and in the original packaging. Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into operation upon acceptance. In the event of a defect for which the seller is not responsible, the goods can be returned within 2 weeks. We will only reimburse the buyer for the product price paid to us. For  ...