cartridge used for sale

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cariba AV30/132 vertical cartoner, intermittent motion, reverse tuck closure, machine on wheels, carton size range: min. 15 x 15 x 70 mm (AxBxC), max. 200 x 120 x 300 mm (AxBxC), output up to 50 strokes/minute, electrics 400V/50Hz, machine footprint approx. 2900 x 1600 mm (LxW), machine height approx. 1695 mm, machine net weight approx. 900 kg

Cariba C300 horizontal cartoner with automatic bottle infeed, continuous motion, reverse tuck closure, GUK pre-folded leaflet inserter, carton size range: min. 15 x 15 x 55 mm (AxBxC), max. 150 x 90 x 220 mm (AxBxC), output up to 250 strokes/minute, electrics 400V/50Hz, machine net weight approx. 2000 kg

Carpentier HSA/60-2/V4 and GV-HM + 2 head folding carton erector HSA/60-2/V4 hot melt and straight seamer GV-HM hot melt + 2 stamp sets for 2 formats available: 188 x 150 mm and 195x 145 mm + meler micron 4/4-120P hot glue machines, incl. manual glue gun + Operating instructions and circuit diagrams available + Siemens S7-300 + Simatic Panel HMI + Videojet coding + Built in 2009 + Like-new condition sartorius EWK 3010 Checkweigher + Built in 2009 + Mint condition Conveyor belts, curved belts + Stainless steel link chains + Drive + Mint condition At call

Eismaschine Carpigiani

Offer 4x Cargo-Liner SP1/SP4 VKD suitable for the Linde tow tractor Linde P30C. Max. payload 500 kg Max. towing weight 3000 kg The cars are little used and in good condition.

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece  ...

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1500 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min power capacity - table: 100 kW Torque: 31784 Nm 0: 218 kw weight of the machine ca.: 55 t Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coola ...

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m No. 1096/97 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look  ...

Stand unit with steel plate with C99 control Measuring ranges: x=5000 mm, y=2600 mm, z=2100 mm Measuring plate: 6000 mm x 3000 mm Rotary swivel head RDS for TP Control panel Dynalog Travelling control unit on the stand, opto-coupler, screen, keyboard, mouse Active vibration damping Without software and hardware. We reserve the right to make changes and errors in the technical data as well as to make the interim sale. Price plus transport and installation.

Used Carrier 30 HXC 265 water cooled chiller on R134A. Complete with 2x Carrier 06NW2300S5EA-A00 & 1x Carrier 06NW1250S7EA-A00 semi-hermetic screw compressors, shell and tube condenser, shell and tube evaporator, 2 oil pumps, control cabinet with a display. Specifications: Brand: Carrier Type: 30 HXC 265 Product type: Water cooled chiller Capacity kW: 911,3 Capacity Tons: 259,1 Refrigerant: R134A Weight in kg: 4492 Sizes: 4250x900x2060 mm (LxWxH) Compressors: 2 Carrier 06NW2300S5EA & 1 Carrier 06NW1250S7EA-A00 Display: Carrier display

Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...

CARRIER 30 RA 040 Brand: CARRIER Type: 30 RA 040 Stock number: M21-4526 Cooling capacity: 39.3 kW Application: Cooling Number of fans: 1 Refrigerant: R407C Refrigerant Content: 10 kg Voltage: 400 Volts Power consumption: 30 A Dimensions: 2100 x 1100 x 1400 mm Weight: 526 kg Year: 1999 Number in stock: 1 piece(s) Price: Quote request Description: Nice air-cooled Carrier chiller with 1 scroll compressor on 1 circuit. This machine is equipped with coated fins, a Pro Dialog Plus controller and a hydromodule (water pump and expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Used Carrier 30 RA 080 air cooled chiller on R407C. Complete with 2 Performer SZ185W4PC scroll compressors, condenser with 1 fan - 50 Hz - 1,8/0,3 kW - 945/470 RPM and a total airflow of 20.880 m³/h, braced heat exchanger as evaporator with a water volume of 7,6 liter, water pump, expansion vessel and a control cabinet with a Carrier Pro-Dialog Plus display. Specifications: Brand: Carrier Type: 30 RA 080 Product type: Air cooled chiller Capacity kW: 79,0 kW Capacity tons: 22,5 tons Refrigerant: Freon Refrigerant type: R407C Weight: 631 kg Dimensions: 2100x1100x1330 mm (LxWxH) Compressors: 2 Performer SZ185W4PC Number of fans: 1 Fan specifications: 50 Hz - 1,8/0,3 kW - 945/470 RPM Amount in stock: 1

General SKU345X794 LocationBarneveld MakeCepa Carl Padberg Main Features MaterialStainless steel Motor1.3 KW Inlet diameter25 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesDia. 400x250 mm Wall thickness10 mm Max. loading weight30 kg Liquid outletDN50 Motor0,9/1,3 kW, 380 volt, 700/1450 rpm, (Ex) Max. basket speed2380 rpm MaterialStainless steel 1.4571 (316Ti) General TypeTZ4 Year of construction1987 Floorspace1,180x0,70 m Total height1,25 m Weight900 kg Extra SpecificationsWith ball spray, light, view glassPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesBasket centrifugesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicCepa Carl PadbergIndustries  ...

General SKU291X390 MakeCepa Carl Padberg TypeZ61G EX No.413-34017 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Inlet diameter40 mm Specified Features - Basket centrifuge Capacity12 kg, 6 dm³ Motor0,16-1,97 kW, 230/400 volt, 240-2940 rpm, (Ex) With variable speed drive240-2940 rpm Max. basket speed17000 rpm MaterialStainless steel 1.4571 (316Ti) General With switchgearcheck Floorspace1,10x1,00 m Total height1,75 m Weight650 kg CEcheck ATEX designedcheck Extra SpecificationsRotor inside diameter 105 mm,Siemens control.with spare parts.Powdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesBasket centrifugesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicCepa C ...

General SKU212T507 LocationBarneveld MakeLe Carbone-Lorraine TypeNC210 S Pressure Vacuum possible jacketcheck Working pressure shell10 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Notified bodyTÜVÖ Heating surface4.3 m² Max. temperature-10/110 °C Shell capacity45,6 Ltr. Shell diameter273 mm Wall thickness shell6,3 mm Max. temperature-10/110 °C Shell connectionsDN40 (2x) Cover connectionsDN80 (2x) MaterialGraphite General No.20146 Year of construction2001 Floorspace0,5x0,5 m Total height1,87 m Weight310 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolv ...

General SKU345S781 LocationBarneveld MakeLe Carbone-Lorraine TypeNK22/42-L-F-XBS-1PP/10PS No.10684 Pressure Vacuum possiblecheck Working pressure shell3.2 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphilor Tube (Material)Graphilor Surface22.62 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface22,26 m² Tube capacity44 Ltr. Number of tubes:700 Tube diameter9,5 mm Tube length1066 mm Max. temperature-30/200 °C Shell capacity53 Ltr. Shell diameterdia. 9,5x540 mm (x700 st. tubes) Shell length540 mm Max. temperature-30/200 °C Shell connections(2x) DN450 Cover connections(2x)DN80, (2x)DN25 MaterialGraphite Graphilor XBS General Year of construction2000 Floorspace0,65x0,85 m Total height1,3 m Weight1145 kgOils  ...

General SKUR0892 MakeLe Carbone-Lorraine AG (FRA) LocationBarneveld CEcheck TypePolyblock NC610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface24 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface24 m2 Tube capacity92 l Max. temperature165°C Shell capacity136 l Shell diameter640 mm Shell length1934 mm Wall thickness shell10 mm Max. temperature165°C Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS General No.22613 Year of construction2008 Floorspace1.0 x 1.0 m Total height2.3 m Weight1800 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fill ...

General SKUR0893 MakeLe Carbone-Lorraine AG (FRA) LocationBarneveld TypePolybloc NF610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface24.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface24.5 m2 Tube capacity134.1 Ltr Max. temperature165 Degr.C. Shell capacity100 l. Shell diameter660mm Shell length1900mm Max. temperature165 degr. C Shell connections2x DN150 Cover connections2x DN200 Capacity134.1 Ltr MaterialGraphite Graphilor XBS General No.17324 Year of construction1989 Floorspace1,0x0.9 M Total height2.4 M Weight1500 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCat ...

General SKUR0896 MakeLe Carbone - Lorraine Polybloc (Fr) LocationBarneveld TypeNF 610 G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface16.3 m² Tube capacity80 l. Max. temperature165 °C Shell capacity94.2 l. Shell diameter660 mm Shell length1450 mm Wall thickness shell9,52 mm Max. temperature165 °C Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS General No.17367 Year of construction1991 Floorspace1.0 x 1.0 m Total height1.7 m Weight1300 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fi ...

General SKUR0890 MakeLe Carbone AG (F) LocationBarneveld TypePolybloc NF610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16.3 m² Tube capacity94,2 l. Max. temperature165°C Shell capacity80 l. Shell diameter660mm Shell length1380mm Max. temperature165°C Shell connectionsDN150 (2x) Cover connectionsDN200 (2x) MaterialGraphite Graphilor XBS General No.130261 Year of construction1990 Floorspace0,9x0,9 m Total height1,8 m Weight1300 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganic ...

General SKUR0894 MakeLe Carbone AG LocationBarneveld TypePolybloc NF 610 G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16,3 m² Tube capacity93,9 l. Max. temperature165°C Shell capacity80 l. Shell diameter660 mm Shell length1370 mm Max. temperature165°C Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS General No.17496 Year of construction1997 Floorspace0,9x0,9 m Total height1,7 m Weight1250 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPape ...

General SKUR0891 MakeLe Carbone-Lorraine AG (FRA) LocationBarneveld TypePolyblock NF610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16.3 m² Tube capacity80 l. Max. temperature165°C Shell capacity93,8 l. Shell diameter662mm Shell length1370mm Max. temperature165°C Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS General No.17474 Year of construction1996 Floorspace0,9x0,9 m Total height1,8 m Weight1500 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additives ...

For sale: Lot of 2 Carrier Carlyle semi-hermetic reciprocating compressors (06EA Series), originating from industrial surplus. Widely used in industrial refrigeration, cold rooms, commercial HVAC, and process cooling. The units are delivered as shown in the pictures, preserving their original nameplates and technical specifications. COMPRESSOR 1: • Model: Carrier Carlyle 06EA265 600 EE (Serial: T2E207143) • Design: 6 cylinders / Semi-hermetic reciprocating • Power: 25 HP • Power supply: 400 V · 50 Hz · 3-Phase • Current: 48 A • Speed: 1,450 rpm • Max working pressure: 21 bar • Compatible refrigerants: R12, R22, and R502 (Oil charge: approx. 9L) • Year: 1992 COMPRESSOR 2: • Model: Carrier Carlyle 06EA575600 (Serial: 0599J02415) • Design: 6 cylinders / Semi-hermetic reciprocating • Motor model: 6EACCD1B2D41 (Made in USA) • Power: 30 HP � ...

General SKU296Y560 MakeLe Carbone-Lorraine Serial17461 Pressure Working pressure shell6 Bar Working pressure tubes8 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface80 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface± 80 m² Tube capacity340 l. Number of tubes:± 220 Tube diameter± 16 mm Tube length± 7150 mm Max. temperature60 °C Shell diameter670 mm Shell length7742 mm Max. temperature60 °C Shell connectionsø 200 mm Cover connectionsDN 200 MaterialGraphite, Mild steel General TypePOLYBLOC EXCHANGER NCH 61OG Year of construction1996 LocationBarneveld Floorspace7,75 x 1,05 m Total height1,5 m Weight8000 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed addi ...

CARRIER 30 RB 033 Product number:M18-4307 Cooling capacity:33 kW Number of fans:1 Refrigerant:R410A Refrigerant Content:8,6 kg Voltage:400 Volt Power consumption:10,15 kW Dimensions:1002x824x1790 mm Weight:262 kg Year:2016 Number in stock: 1 piece(s) Price:Quotation request As good as new air-cooled Carrier water chiller with 1 fan and 1 scroll compressor. Mentioned capacity at a water temperature of 12/7°C and an ambient temperature of +35°C. Please also visit our website: used-refrigeration

Pumps Cardinal Health Alaris CC/GH Cardinal Health Alaris GW Bbraun Perfusor FM Bbraun Perfusor Compact Bbraun Perfusor Space Bbraun infusomat Space P Fresenius Pilot A2/C Fresenius Orchestra DPS+A+bases Fresenius Optima ST Fresenius Orchestra MVP PT/ST Fresenius Volumat/Injectomat Agila Fresenius Injectomat MC Agila

Used Carrier 30 RB 0802 air cooled chiller. Complete with 12 Performer scroll compressors SH300A4ACA. Shell & tube evaporator/exchanger 284 ltr. Copper/alu condensor with 12 Axial fans with a total airflow of 54.167 l/s and Pro-dialog plus controling. Specifications Our inventory stock No. 13231 Brand Carrier Type 30 RB 0802 Product type Air Cooled Chiller Capacity kW 774,0 Capacity Tons 220,1 Refrigerant Freon Refrigerant Type R-410A Weight in kg. 6740 Sizes 7300x2250x2240 Compressor(s) type & model 12x Performer SH300A4ACA Display Pro-Dialog plus Number of fans 12 Fan specifications 960 RPM Remarks | Y.O.B. 2006 Amount in stock 2 We have hundreds of different chillers, see our other advertisements or visit our website.

Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Electrical specifications: 3x400 V+N+PE/50 Hz/16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for the study of living cells and cell cultures in biology and medicine. Due to the inverted design, the objectives are located below the stage, which allows observation in larger culture vessels such as petri dishes or microtiter plates. Technical features Optics: Equipped with the ICS system (Infinity Color-corrected System) from ZEISS for high optical performance in all contrast processes. Lighting: Equipped as standard with a 12V 35W halogen lamp for transmitted light; optionally, an HBO 50 mercury vapor lamp can be used for fluorescence applications (model CFL). Contrast Method: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C model has an integrated photo port (C-mount adapter) on the front for di ...

Display, display module, display panel -Manufacturer: Rittal Carel, Display Panel -Rittal: Type LKH -Carel: Type RITRC000T0001 -Dimensions: 440/190/H60 mm -Weight: 0.6 kg

Aircooled chiller/Heat pump CARRIER 30RQ0522 0157 PEE 465 kW/560 kW Cooling capacity: 465 kW / 132.22 tons (12/7 — 35°C) Heating capacity: 560 kW / 159.23 tons (40/45 —7°C) Year of manufacture: 2011 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. Danfoss SH300A4ACB (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. + 2 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump WILO DL65/170(163)-11/2 Carrier, expansion vessel. Dimensions: 4.8x2.3x2.4 m. Weight: 5059 kg. Working hours: 448/457/454/119/835/772/771/760 h. Condition: Good

CARER R120 SE Electric Forklift 12 T Triplex Mast Manufacturer: Carer Type: R120 SE Serial Number: 1100325-R00120 Year of Make: 2011 Drive: Electric Nominal load capacity: 12000 kg Maximum lifting height: 5300 mm Curb weight without battery: 16750 kg Battery weight: min. 4450 kg Battery weight: max. 5400 kg Tires: Superelastik twin tires Location: Kirkel

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.

Make: Carrier Type: QUIETIS WPH31A 400/3/50 Refrigerant: R404A Built: 2013 Price on request

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

Endmass Cary 1, Frank 0, Frank 1, Sel gr. 0, Sel gr. 1

Qty 1 x Carter MK3+ Banbury internal mixer,  chamber volume 90L,  batch weight approx 85kg,  2 wing tangential rotors,  drilled sides, roller bearings,  hydraulic drop door with linear actuator and spade latch.  F type dust seals.  With 325kw, 1070rpm, 715A, DC variable speed motor and controls.  Pneumatic hopper.  Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds). 

Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).

Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...