carto n used for sale

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

3-axis machining center X: 560 mm Y: 500 mm Z: 390 mm Rapid traverse rate: 4 m / min Table load: 800 kg Speed range: 4000 RPM Spindle retainer: SK 40 Headstock speed range: 4000 RPM Spindle drive: 4 kW Control: Dialog 11 Electr. Handwheel Coolant system direct measuring system Documentation Total power: 19 kW Machine weight: approx. 2.8 kg Dimensions (W x D x H): 3.66 x 3.5 x 2.1 m

Table size: 410 x 900 Traverse path x/y/z: 560/410/380 mm spindle retainer: SK 40 spindle speeds: 22-6000 rpm feeds: x & z to 10000, y up to 240 mm / min space: 2600 x 2000 x 2300 mm weight: 3500 kg

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Connection: kW 400 V

Foellmer ME 45/EX; good condition; Working width 450mm; short and long investment table; Tool for groove and perforate; Foot switch; Zaehler.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Complete screw and cylinder with filament and lockable nozzle. NEW!

Technische Daten: - 2 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 4,0 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Filterflaeche 11,7 m2 - 30 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 2 x 70 l - Ansaugstutzen 200 mm - Volumenstrom Nominal 3300 m3/h - Volumenstrom Minimum 2200 m3/h - Unterdruck 2600 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 2570 mm, B= 1.100 mm, H= 2.490 mm - Gewicht 400 kg

Technische Daten: - 4 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 5,5 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Stromaufnahme 32 A - Filterflaeche 23,5 m2 - 60 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 4 x 70 l ges. 280 Liter - Ansaugstutzen 250 mm - Volumenstrom Nominal 5400 m3/h - Volumenstrom Minimum 3500 m3/h - Unterdruck 2800 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 3480 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 900 kg

Technische Daten: - 6 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 7,5 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Stromaufnahme 32 A - Filterflaeche 35,32 m2 - 90 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 6 x 70 l ges. 420 Liter - Ansaugstutzen 300 mm (rechts) - Volumenstrom Nominal 6000 m3/h - Volumenstrom Minimum 5100 m3/h - Unterdruck 3.400 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 4350 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 1000 kg

plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 93 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TFT replacement monitor for MAHO machines with Philips control CNC 432 2 year warranty!; New

: 26,9 / 33,7 / 42,4 mm : 3/4, 1, 1 1/4 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 8 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wall thickness max.: 5 mm wall strength: VA 4 mm : 26,9/33,7/42,4 /48,3/60,3 mm : 3/4, 1,1 1/4, 11/2 ,2 Zoll total power requirement: 2,2 kW voltage: 230 oder 400 V weight of the machine ca.: 87 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wall thickness max.: 4 mm : 27 - 61 mm wall thickness: VA 3 mm mm weight of the machine ca.: 7 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 27 / 34,8 / 42,8 /49 / 60 mm : 3/4, 1, 11/4, 11/2, 2 Zoll wall thickness max.: 5 mm wall strength: VA 4 mm voltage: 230 oder 400 V total power requirement: 2,2 kW weight of the machine ca.: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 42,4, 48,3 mm : 1 1/4, 1 1/2 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 15 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48,3 / 60,3 mm : 1 1/2, und 2 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 15 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 pressure: - : 17/22/23/28/40/48/55 mm : 230 V total power requirement: 1,1 kW weight of the machine ca.: 85 kg dimensions of the machine ca.: 860 x 400 x 450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

We offer you used warehouse stage. Technical data of offered camp stage of Nedcon: It is possible to run a stock stage in the following composition: Possible column spacing: 4 m x 4 m, 5 m x 5 m. Height 3895 mm incl. gratings Höhne 3845 mm only with Sigma -Load capacity 300kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm -Project prepared according to customer needs. Price for bearing stage only on request available. Please contact us in connection. Price for 1 m² - â?¬70 NET / sqm plus Assembly Prices are net, plus statutory VAT. On request, we can arrange transport throughout Europe. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. It's used goods. Before you ...

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

wire diameter range: 1,8 - 3,4 mm nail length: 13 - 80 mm output: 550 nails/min. partly refitted and new painted; very good

wire diameter range: 1,8 - 3,1 mm nail length: 13 - 80 mm output: 550 nails/min new painted; good

Used dough extruder / noodle machine DEA, Type: Troffiatrice 4.F. - for Troffie and Strozzapreti - several product sizes - easy handling - frame in stainless steel - condition: good, ready for operation El. Connection: 380 / 220 V, 50 Hz Capacity: 45 kg / h The machine is in a good condition and ready for operation. Inspection and test run are possible at every time.

Used noodle machine for tortellini FACCHINI, Type: TA 540 - 9P - double calibrating unit - winding unit adjustable - funnel for the filling mass - fully in stainless steel - touchscreen PLC controlling El. connection: 400 V, 50 Hz, 3Ph, 10 kW Netto weight: 1.500 kg Capacity: approx. 150 kg/h Width baking sheet: 540 mm The machine is in a good condition and ready for operation. Inspection and test run are possible at every time.

Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.

Technical data in image

Nova Biomedical Biotech Analyzer Analysis Time: 50 sec; good

SIMASV AUSKLINKEN MACHINE TYPE AF226/B -Capaciteit 220 x 220 x 6 mm -Hydraulic -Afmeting table 650 x 650 mm -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Nail series: 34° paper collated Strip nails Wire diameter: 3.8-4.6 mm Nail length: 100-160 mm Working pressure: 5-8 bar Weight: 7.10 kg Magazine capacity: 72 nails + Paper collated Strip nails of 4.6 x 160 19200 piece (600 St / carton, 32 piece box, order No. 140037) Compressed air nail machine 1100 EUR, 19200 ships nails 640 EUR

Naehmaschine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B; You buy an industrial naehmaschien from Brother Naehmachine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B, DB2-B737-413 380V

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 46 + Format (cm): 32x46 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

; New Diameter: 635mm Height: 590mm

Non-contact position measuring system Manufacturer: Dornier Type: I-W-A Anwendungsgebite are: Axial and radial shaft vibration measurements Monitoring of measuring tolerances Determination of deformation and displacement Measurement of wave and eccentricities Roundness measurement Valve position measurement Thickness measurement Accessories: various transducer and mounting plates Evaluation electronics Connection cable Operating instructions Calibration curves Condition: used More info: see also photos All information without guarantee

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 52 + Format (cm): 32x52 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Technische Daten: - 4 Spaene-Tonnen mit Klemmbuegel 600 x 500 mm - Reststaubgehalt: 0,1 mg/m3 - Loeschautomatik mit Pulverlöschung - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme: 11,0 kW - Netzspannung: 400 V / 50 Hz /3 Ph ~ - Stromaufnahme: 32 A - Filterflaeche: 45,2 m2 - 120 Stück Filterschläuche - Filterregeneration: automatisch, pneumatisch JET-System - Volumen-Staubtonnen: 4 x 200 L ges. 800 Liter - Ansaugstutzen: 350 mm - Volumenstrom: 8640 m3/h - Unterdruck 3600 Pa - max. Schalldruckpegel 72 dB (A) - Abmessungen: L= 5470 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 1100 kg

4x NUMMERATORS STRAIGHT, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

1x NUMMERATORS STRAIGHT, FORWARD, BIG No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

7 x LETTERPRESS - NUMMERATORS FOR ZYLINDER & TIEGEL 1x straight, 6 digits, backwards, small numbers 5x straight, 7 digits, backwards, big numbers 1x straight line, 5 digits, backwards, small numbers

Machining center - vertical PRIMINER DELTA CENTER V6L camp-Nr. 1105-02424 category machining center - vertical make PRIMINER type DELTA CENTER V6L year 2018 State second-hand machine control CNC storage France origin country Germany Delivery time immediately cargo base EX WORK HAGUENAU Technical details x way 600 mm y-way 400 mm z-way 450 mm overall power demand 20 kW machine weight approx. 3.5 t description machine new with aim Electr. Establishment, coolant system IKZ 20 BARS, Techdoc. CNC SIEMENS 828 3D technical specifications DELTA CENTER V6L CNC control SIEMENS 828 3 D Table dimensions mm 750 X 400 MM T-slots 14 x 3 x 125 mm Maximum table load kg 350 X/Y/Z stroke mm 600 / 400 / 450 Distance spindle/table surface mm 80-530 Distance spindle Center / Z axle cover 435 mm Spindle retainer for SK 40 / 120 mm Spindle speed RPM 10,000 Spindle motor kW 20 SK 40 7/ ...

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Supply: 400 V kW space: 3100 x 2500 x 2750 mm weight: 7500 kg

C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe section for spindle work (fluting, carving). Unit complete with extra parts and lots of tooling.

More information on request Excellence working condition

For transfer of liquids, must, de-stalked grapes, yeast Technical data: Thread connection 2 x DN 65 Type: AM 112 NZ4/2 3 ~ Mo. No. 43604117 ?/ YY 380V 7,8/8,8 A 3,2/ 4,0 kW 1430/ 2870 1/ min 50 Hz VDE 0530/72 B/IP 44 Measurements and Weight: Total Height: 1000 mm Width: 700 mm Length: 1018 mm Weight approx. kg

Facilities: -Console machine with cantilever -Pneum.. Workpiece stops with double-acting cylinders -Pneum.. Assembly AIDS -additional editing fields front (4-field machining) -Handheld -C axis -Swivel sawing unit to the grooves in the X - and Y-direction -Horizontal milling unit for lock box -Plate tool changer driving with - laser positioning aid for the cleaner -autom. Central lubrication system Technical data: -Traverse path Max X: 3.259 mm -Traverse path Max Y: 1,483 mm -Maximum Z: travel 325 mm -Speed Max x: 75 m / min -Speed Max Y: 75 m / min -Maximum Z: speed 30 m / min -Workpiece thickness max: 100 mm -Spindle motor power: 7,5 kW -Main spindle speed: 1000-18000 RPM -Recording of main spindle: HSK 63F -Recording spindles: M10 with 11 mm fit -Number of vertical spindles: 14 pieces -Number of horizontal twin spindles in the X direction: 1 piece in the Y-d ...