carl zeiss jena used for sale

CARL ZEISS CNC Coordinate Measuring Machine ACCURA II MEASURE 16/42/15 Year of Make: 2013 Refurbished: 2025 Measuring range: X= 1600 mm, Y= 4200 mm, Z= 1500 mm Control: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Stylus Change Magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 Workstation with 27" Minitor Calypso Basic current version Any additional option possible Accessories: Measuring ball Interchangeable plates XT and XXT Interchangeable magazine slots Pushbutton Accessories Documentation Other accessories

ZEISS ACCURA SIZE 7/9/5 Year of manufacture: 2008 Refurbished: 2025 Measuring range: X= 700 mm, Y= 900 mm, Z= 500 mm MPE E = 1.6+L/333 at 18-22 °C R0 = 1.7 MPE-P = 1.7 MPE-THP = 2.5/50sec RONt = 1.7 Device features, equipment: Control C99 SR VII Automatic temperature compensation Sensors VAST XT GOLD Selectable stylus changing magazine Pushbutton accessories selectable Measuring ball HP Workstation with Monitor Software: Calypso Basic current version Options: Calypso freely selectable Other accessories

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

JenActUV UV Torpedo conveyor Model: UVTCONV500 Serial: 26557-PO1 Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

servo amplifier -Servo amplifier -Dimensions: 60/170/H240 mm -Weight: 1.9 kg

Power supply for servo amplifiers -AC supply voltage: 18-110 V rms/47-63 Hz -DC link voltage: 24-155 V -Dimensions: 60/165/H240 mm -Weight: 1.7 kg

Analytik Jena Merkur Mercury Analyzer Single-beam device with low-pressure lamp Measuring range in the ppt and ppb range. Excitation Fluorescence at 253.7 nm Software

We are offering for sale a Analytik Jena PlasmaQuant MS Elite S including ASX560 autosampler Year of Manufacture: 2021 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Carrier screw compressor with receiver Motor: 93KW/2900rpm Displacement:504m3/hr R134A 400/3/50hz Ready for operation

Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Load capacity 7 t - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 2 x arm length 750 mm - 1 x arm length 850 mm - Traverse dimension approx. L 1500 x W 1300 mm - Weight with chains approx. 200 Kg

Technical data: - Load capacity 10000 Kg - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 1 x arm length approx. 700 mm - 1 x arm length approx. 800 mm - 1 x arm length approx. 1100 mm - Traverse dimension approx. L 1600 x W 1400 mm - Weight with chains approx. 200 Kg

Construction 1976 Capacity 150 l , all Complete , ready for immediate use

Filter centrifuge used. for filtering, washing, separating, drying, rinsing in chemistry, biotechnology or pharmaceuticals Manufacturer: CEPA Carl Padberg Zentrifugenbau GmbH Type: TZ 5 Year: 2013 Drum diameter: Ø 500 mm Filling volume: max 35 l Filling weight: max 50 kg Drive: 5.5 kW 230/400 V Size approx. 1400 x 1000 x 1200 mm + control cabinet 1200 x 500 x 1450 mm Subject to changes and errors in the technical data, information and prices as well as prior sale.

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Load beam Manufacturer: Carl Stahl Length: 3 m Load beam in a modular system with curved suspension loop as single-point suspension, suitable for load hooks according to DIN 15401 and with two adjustable, burnt safety load hooks.

Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.

General SKU203U020 MakeCarl Canzler Type1640 Ltr. No.15451 Year of construction1974 Mounted on legscheck Pressure Working pressure3 Bar Main Features MaterialMonel Volume1640 Ltr. Pressure3 Bar Specified Features - Pressure vessel Capacity1640 Ltr. Vessel sizesdia. 1200x1300 mm Dished topcheck Dished bottomcheck Top connections2x DN50, DN100 OutletDN50 Max. temperature120 °C MaterialMonel 2.4360 General LocationBarneveld Floorspace1,5x1,2 m Total height2,6 m Weight450 kgGeneric medicinesPressure vesselsFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPICarl CanzlerIndustries > Pharmaceutical > Generic medicinesTanks > Pressure vesselsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > ...

General SKU345X794 LocationBarneveld MakeCepa Carl Padberg Main Features MaterialStainless steel Motor1.3 KW Inlet diameter25 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesDia. 400x250 mm Wall thickness10 mm Max. loading weight30 kg Liquid outletDN50 Motor0,9/1,3 kW, 380 volt, 700/1450 rpm, (Ex) Max. basket speed2380 rpm MaterialStainless steel 1.4571 (316Ti) General TypeTZ4 Year of construction1987 Floorspace1,180x0,70 m Total height1,25 m Weight900 kg Extra SpecificationsWith ball spray, light, view glassBasket centrifugesGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPowdered foodsCepa Carl PadbergCentrifuges ...

General SKU291X390 MakeCepa Carl Padberg LocationBarneveld CEcheck TypeZ61G EX Main Features MaterialStainless steel Motor1.5 KW Inlet diameter40 mm Specified Features - Basket centrifuge Capacity12 kg, 6 dm³ Motor0,16-1,97 kW, 230/400 volt, 240-2940 rpm, (Ex) With variable speed drive240-2940 rpm Max. basket speed17000 rpm MaterialStainless steel 1.4571 (316Ti) General No.413-34017 Year of construction2002 With switchgearcheck Floorspace1,10x1,00 m Total height1,75 m Weight650 kg ATEX designedcheck Extra SpecificationsRotor inside diameter 105 mm,Siemens control.with spare parts.Basket centrifugesGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPowdered foodsCepa C ...

balancing body min/max.: 30 - 5000 kg balancing body diameter with machining unit: 2100 distance of bearings: kleinster 240 mm dia. axle journal: 35 - 180 mm weight of the machine ca.: 400 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU071F418 MakeCarl Canzler GmbH &: Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 LocationBarneveld Pressure Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4,2 m² Tube capacity31/21 Ltr (Channel A/B) Max. temperature160°C. Max. temperature160°C MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Floorspace0,8x0,6 m Total height0,8 m Weight300 kgGeneric medicinesOintmentsTea, herbs & coffeeShell and tube heat exchangersFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDeter ...

diameter range 5-8 mm shaft length under head 60 mm max. cut-off length 90 mm output pieces/min 200

General SKU071F416 MakeCarl Canzler GmbH &: Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4,2 m² Tube capacity31/21 Ltr (Channel A/B) Max. temperature160°C. Max. temperature160°C. MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Floorspace0,8x0,6 m Total height0,8 m Weight300 kgGeneric medicinesOintmentsTea, herbs & coffeeShell and tube heat exchangersFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPap ...

diameter range 3-6,35 mm shaft length under head 65 mm cutting length 87 mm output pieces/min 360

diameter range 2-6,35 mm shaft length under head 70(65) mm cutting length 87 mm output pieces/min 360(320)

diameter range 2-5,5 mm shaft length under head 45 mm max. outside dia. Alu 6 mm output pieces/min 450 cutting length 64 mm

diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470

bushing cut-off diameter range 5 mm number of dies 6 number of stations (incl. cut off) 7 cutting length 35 mm shaft length under head 25 mm output - pieces/min 400 press power 15 to

diameter range 0,8-3,0 mm cutting length 30 mm shaft length under head 25 mm output - pieces/min 600

Description Item #8766 - 5-ROLL REFINER Manufactured by CARLE & MONTANARI Model Hydrostatic.B.1300 1300mms wide Rollers Last used on Chocolate & Creams, with fat percentage between 23 & 28% Has been well maintained whilst it was in production, no longer in production Production capacity of around 600-900Kgs Per hour at 20Microns.

Description Item # 8971 - (2) CANDY DOUBLE TWIST WRAPPERS Manufactured by CARLE & MONTANARI One is Model CM.H500 Set up for approx. piece size 28mms long x 22mms wide One is Model CM.H70 : Set up for approx. piece size 28mms long x 22mms wide Each around 350 pieces per minute

Description CHOCOLATE BISCUIT MOULDING LINE Manufactured by CARLE MONTANARI Model Multicavemill 1200 Mould dimensions 1110mm x 285mm. Approximately 1200 moulds on the chain. year 1993 including biscuit infeed conveyor with incline and overhead distribution incorporating 180deg turns Demoulding Station, twist action Mould Change System with product detection Mould Conditioning prior to deposit Model MLR 1200 Chocolate Depositor Shaker/Vibrator Biscuit Depositor / Placing System and Presser Backing Off System and Shaker/vibrator Cooling Chamber The line has a REISDORF ASM-1200 Wide Target Sprinkler for sprinkling ingredients on products Allen Bradley Controls 415volt 3phase 50hz Includes 2 x AASTED AMT-2000 Chocolate Tempering Machines, both from Year 1993, and access platform/gantry Line length 35.2m x 4m high at maximum (depositor section) No moulds are included.

Description Item # 9321 - FILLING & DOSING MACHINE FOR FOOD PRODUCTS Manufactured by CARLO MIGLIAVACCA (Italy) Model Number Dosatrice TA240 Year 2013 415Volts, 3.5kW, 50Hz Semi-automatic volumetric mechanical piston filler Ideal for the highly accurate dosing of mango pickles as well as other mixed food products With whole pieces, liquid, pasty, and semi-dense products into glass, metal, or plastic containers 0.3 to 20litre fill levels around 1000 per hour on 3-5Kgs weights Including conveyor

15 electric motors from various manufacturers are offered. 1) 2 × SEW-Eurodrive R73 DT90L-4, power: 1.5kW. 2) Eurodrive AB R60 DT80K4/2B, power: 0.4/0.63kW. 3) Elektrim SF90S4, power: 1.1kW, weight: 125kg. 4) AEG. 5) Carl Bockwoldt CD2-71N/4D, power: 0.37kW. 6) K. W. Müller RD0KL 44U/max110KP, power: 0.09kW. 7) EMC Eldro ED30/5. 8) ZET DR 1.5/4-90L, power: 1.5kW. 9) Eberhard Bauer D143/146K. 10) Groschopp DM80-60, power: 4kW. 11) Flender Himmel SP0-G63/L, power: 0.18kW. 12) BBC QU X160 M2 BG, power: 15kW. 13) ATB Antriebstechnik A160L/4E-21, power: 15kW. 14) Georgii-Kobold KLB424V, power: 0.10kW. Inspection is possible by prior arrangement.

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

ZEISS MC 850 X-AXIS STROKE: 850 MM Y-AXIS STROKE: 1200 MM Z-AXIS STROKE: 600 MM WEIGHT APPROSS. 3800 KG DIMENSIONS (W X H X D): 1.6 X 1.56 X 2.95 MM

RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG

x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zeiss LM 100 large inspection microscope The microscope has been used in the electronics industry, in the production of touch screens

Zeiss Intrabeam System Irradiation Device, Accelerator. Used in ophthalmic therapy, tumor irradiation. With PTW dosing device. Complete with instruction manual, samples, etc.

Rotary union, 2x 1/2", 991769, Haag & Zeissler, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - Comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional,- It may be that these are only minor storage marks and that the part is still as good as new and has never been used, but we cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updat ...

This 3-axis ZEISS Prismo Navigator 7 was manufactured in 2012. It features a maximum permissible error of 0.9 + L / 350 µm, ensuring high precision in measurements. If you are looking to get high-quality coordinate measuring capabilities, consider the ZEISS Prismo Navigator 7 CMM machine we have for sale. Contact us for further details.

This 3-axis ZEISS Contura 9/12/8 RDS was manufactured in 2019. It features a power rating of up to 600 VA, making it suitable for various applications. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura 9/12/8 RDS CMM machine we have for sale. Contact us for further details.

Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

x-travel: 9200 mm y-travel: 1600 mm z-travel: 2400 mm dia. of test piece: mm working area: mm dist. between centers: mm control: ZEISS C 99 total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: 10 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.