We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
120,097 used machines on RESALE, but how to find them? Machine Search
used
Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions: ...
used
Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions: ...
used
used
Carrier screw compressor with receiver Motor: 93KW/2900rpm Displacement:504m3/hr R134A 400/3/50hz Ready for operation
used
Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available
used
Mechanic lathe Fabr. VEB CARL ZEISS JENAFabr. -No: 607/84, built in 1984Center height: 150 mm:Circumference diameter over support: 75 mmTip width: 550 mmSpindle bore: 27 mmThread pitches: 0.35 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0Operating voltage / control voltage: 380 V, 220 V, 50 HzRated current of the fuse: 25 AExternal dimensions L x W x H: 1250 x 900 x 1350 mm:With- Underframe- Thread cutting device guide cartridge- large rear shelf made of wood 460 x 990 mm- without tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Stand unit with steel plate with C99 control Measuring ranges: x=5000 mm, y=2600 mm, z=2100 mm Measuring plate: 6000 mm x 3000 mm Rotary swivel head RDS for TP Control panel Dynalog Travelling control unit on the stand, opto-coupler, screen, keyboard, mouse Active vibration damping Without software and hardware. We reserve the right to make changes and errors in the technical data as well as to make the interim sale. Price plus transport and installation.
used
Technical data: - Load capacity 7 t - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 2 x arm length 750 mm - 1 x arm length 850 mm - Traverse dimension approx. L 1500 x W 1300 mm - Weight with chains approx. 200 Kg
used
total power requirement:380V, 50Hz, 7,9A kW weight of the machine ca.:1 t dimensions of the machine ca.:4 x 3 m
used
disc diameter approx. 400 mm.
used
It is still functional, but nothing has been produced with it for a long time. Inner radii and outer radii from 6 to 289 mm. Production examples in the pictures.
used
Technical data: - Load capacity 10000 Kg - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 1 x arm length approx. 700 mm - 1 x arm length approx. 800 mm - 1 x arm length approx. 1100 mm - Traverse dimension approx. L 1600 x W 1400 mm - Weight with chains approx. 200 Kg
used
It is still in working order, but nothing has been produced with it for a long time. On-site inspection is possible.
used
Without documentation.
used
X-travel: 400mm, y-travel: 500mm, z-travel: 300mm, max. workpiece weight: 50kg, resolution: u1=(3.4+L/200)µm, touch probe: PH6/TP2, software: U-Soft 9.04, operational hours: unknown, with documentation, without accessories, has been regularly maintained and calibrated.
used
Load: 3t, length: 7005mm, height: 330mm, weight: 490kg, including documentation.
used
Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg
used
There are a 500kg-column-mounted slewing crane and a 250kg crane traverse Carl Stahl available.
used
REF-2103 DOUBLE TWIST HARD CANDY WRAPPER CM•500 Double twist hard candy wrapper. Brand: S.A. Carle & Montanari. Model: CM-H500. Series number: 01/E. Machine number: 2001. Dimensions: 1.100mm width, 1.600mm length, 1.850mm height.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 13,65 t material: hochfest : length in total: 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Construction 1976 Capacity 150 l , all Complete , ready for immediate use
used
A vibratory grinding bell is sold. This can be moved electrically up and down. Device immediately ready for use, comes from ongoing production and is discarded due to site closure.
used
Universal length measuring device Carl Zeiss ULM600 used incl. accessories
used
Antique Universal Measuring Microscope Fabr. CARL ZEISS JENAbuilt around 1939Craft No. 1191used, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Carl Zeiss WEMI x=150 mm / y=50 mm Accessories Lens 1.5x Lens 3.0x Lace Buck
used
Carle & Montanari 5 Roll Rafiner Model: Hydrostatic B 1300 1300 mm wide rollers
used
Additional title: 2-vessel-plant, with pneumatic valves, Volume each tank approx.: 12 hl, Length: 0,8 m, Width: 0,8 m, Height: 2,5 m, Variety / Product: acid, hot caustic , Material: Stainless steel, Features: complete internal piping with pneumatic valves; CIP-prerun pump; steam heating with heating coil at caustic tank
used
Ref. -No.: 10157 Manufacturer: CARL ZEISS Year of construction: 1997 Type of control: HP 9000 Serie 700 Control: Betriebsystem HP-UX.9.05 Storage location: Halberstadt Country of origin: Deutschland Turntable: 1000x2100 mm Machine weight: 4.800 kg Machine Height: 3050 mm Table height above the floor: 850 mm X-Axis: 850 mm Y-Axis: 1800 mm Z-Axis: 600 mm Further information: Three coordinate measuring machine Microcomputer control X-axis as a longitudinally movable portal Y-axis cross slide in the portal Z-axis as measuring head quill (vertical) Passage between the portal approx. 1,000 / 1080 mm Passage in height approx. 750 mm
used
Filter centrifuge used. for filtering, washing, separating, drying, rinsing in chemistry, biotechnology or pharmaceuticals Manufacturer: CEPA Carl Padberg Zentrifugenbau GmbH Type: TZ 5 Year: 2013 Drum diameter: Ø 500 mm Filling volume: max 35 l Filling weight: max 50 kg Drive: 5.5 kW 230/400 V Size approx. 1400 x 1000 x 1200 mm + control cabinet 1200 x 500 x 1450 mm Subject to changes and errors in the technical data, information and prices as well as prior sale.
used
Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg
used
General SKU203U020 LocationBarneveld MakeCarl Canzler Type1640 Ltr. No.15451 Year of construction1974 Pressure Working pressure3 Bar Main Features MaterialMonel Volume1640 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialMonel 2.4360 Capacity1640 Ltr. Vessel sizesdia. 1200x1300 mm Dished topcheck Dished bottomcheck Top connections2x DN50, DN100 OutletDN50 Max. temperature120 °C Information Mounted on legscheck Weight450 kg Floorspace1,5x1,2 m Total height2,6 mPressure vesselsCarl CanzlerTanks > Pressure vesselsBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhoehe / Lift high max. 1600mm Gabel Laenge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
General SKU071F415 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5849 Year of construction1985 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
used
General SKU071F418 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
used
General SKU071F416 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MShell and tube heat exchangersCarl CanzlerHeat exchangers > Shell and tube heat exchangersBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
used
Two-vessel stainless steel brewhouse with 120 hl knock-out volume. With additional whirlpool and wort treament (wort cooler, wort aeration), Additional title: 120 hl knockout capacity, with whirlpool, wort treatment and CIP-plant, Knockout capacity: 120 hl, Grist: 1800 kg, Voltage: 480 V, Frequency: 50 Hz, Material: stainless steel AISI 304, Base construction: on feet, Features: premasher; agitator; internal boiler; raking arm with spent grain bar, spent grain pump; vessel partial insulated
Article number: 27-01-190 Manufacturer: Carl Stahl Very good general condition Fully functional Shipping time: All rights reserved. Year of construction: ca.2011 L x W x H: approx. 7000x500x500 Weight: approx. 900kg Length: approx. 6000mm Weight: approx. 900kg Max.load capacity: approx. 32000kg Accessories Documentation Other accessories on request Price and other technical data on request
used
Article number: 27-06-188 Manufacturer: Carl Stahl Good general condition Shipping time: All rights reserved. Year of manufacture: unknown L x W x H: approx. 6000x250x900mm Weight: approx. 600kg Load capacity: approx. 10 tons Other accessories on request Price and other technical data on request
used
Description: Working surface: approx. 200 x 200 mm With hand lever: approx. 500 mm length weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 660 x 400 x 400 mm
used
Description: Composed of: - Machine body dimensions 2015x1700x2843 mm - Desk with pc, monitor, HP printer , - External unit ZEISS ACCURA MASS/B, 1600 VA - ZEISS control console - ZEISS calibration sphere - Exchange magazine with Contact Probing System heads and 1 Optical Probing System head - Complete with user and installation manuals , - Complete with instruction manual for CALYPSO software - Various boxes and packaging for component storage  , NOT INCLUDED, EXCLUDED FROM SALE, VISUAL MICROSCOPE z-motion: 700 mm, x-motion: 900 mm, y-motion: 1,200 mm, control: PC, software: CALYPSO, table surface area l x w : 1500x1150 mm, daylight: 1,100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 2,015 x 2,843 mm
used
table diameter: 4520 mm table load: 12000 t swivelling range: 110 Grad total power requirement: 44 kW weight of the machine ca.: / t required space: / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 ---------------------------------------------------------------------- ---- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH ...
used
Gear motor, DC gear motor CARL CLOOS KG TGN 94-60 ( TGN94-60 ) Gearbox: Z5N 024140000 0,0,17 kW 142 rpm armature voltage: 31.5 V DC field voltage: 34.0 V DC shaft diameter: Ø 17 mm Flange diameter: Ø 80 mm used, tested ! Dimensions: 285 x 160 x 130 mm
used
A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price
new
oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...
new
Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...
used
Type: welding robot Romat 410 Welding machine MC3R 553. Workstation with 10m travel. WPG-S-20000N positioners with a span of up to 5m.
used
This Zimmer+Kreim Genius 700 erosion machine was made in the year 2004 and includes a Chameleon tool changer type B. The measuring machine Vista Carl-Zeiss was made in the year 2003. All machines are connected.
used
This CARL ZEISS ScanMax G32001-9906-000 measuring machine was built in the year 2007 in Germany.
used
length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm