cardboard baler used for sale

For punching out packing material (paper and cardboard) Various die-cutting stencils for chocolate bars and chocolates Produced at Hamburg. (cost approx. 300€) Good condition, still in use Y/O'A 1991 From Germany

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).

For grooves and grooves according to the method of beam groove Benefits: The 62 cm working width allows grooves, grooves and perforates even for large formats. The robust structure of this groove machine and creasing machine makes it possible to groove and groove up to 3 mm thick cardboard. Special tools can also be installed. (e.g. small punching tools, perforation tools...) By printing e.g. on a paper mallow a buckling edge (fold) is produced. This fold allows the bag to be folded/handled cleanly with a bag. Ideal if the bags are made of several layers of paper. Dimensions 850 x 750 x 1150 mm Built in 2014

Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.

approx. 50 fields of general cargo flow rack / delivery rack for boxes or cardboard boxes etc., SSI Shepherd – used – : Price per field ex location: only 350.-€ (net) dismantled, packed and loaded! For complete sale price per field: only 300.-€ (net) dismantled, packed and loaded! Manufacturer: SSI Schäfer Type: Continuous rack DR2 Year of construction: 2002 Storage according to FIFO principle (First In – First Out) maximum compartment load: 240kg at field width: 1.056mm 480kg at field width: 1.944mm maximum field load: 960kg at field width: 1.056mm 1.920kg at field width: 1.944mm 4 levels Dimensions shelf: Depth: approx. 2,90m Height: approx. 2,47m Field width: mainly 1.944mm Field width: (few) 1.056mm Dimensions running level: approx. 2.95m Condition: very good Available: from now on Location: Biebergmünd (Hesse)

Cardboard and boxes packers Manufacturer: Kettner GmbH Type: Blitzpac JUNIOR E 3 T Year: 1999 Capacity: 300 /hour Current: 3 x 380 V - 50 Hz Control voltage: 24 V DC S-7 Siemens

Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.

Specifications: Tested load capacity: 1,000 kg according to ANSI MH 26.2 Clear span: 1,000 mm for stand depth: 1,100 mm Assumed truss width: 50 mm Indoor use only The scope of delivery includes: Wireframe, new Material color: sendzimir galvanized Design: placed shelf gratings, folded on both sides Width: 1,112 mm Length: 890 mm Mesh size: 106 x 53 mm Wire thickness: 3.8 mm Number of beams: 7 pcs. Unit weight: approx. 7.53 kg Application: Compartment size/ modules required per subject 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat dust leche: On request we can provide you with heat dust (see pictures) offer for sale; Prices on request. Fire protection places special requirements. Therefore, the wire mesh can be provided with a welded heat dust lech. And if you need a slip-through protection for cardboard boxes, the  ...

Cardboard packer with 3 heads

Packaging line consisting of roller conveyor length 18 m, width 900 mm, electronic scale 150 kg, Cardboard gluing device and pneumatic lifting device

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Specifications: Tested load capacity: 500 kg according to ANSI MH 26.2 Clear span: 1,000 mm for stand depth: 1,100 mm Assumed truss width: 50 mm Indoor use only The scope of delivery includes: 01x wireframe, new Material color: sendzimir galvanized Design: placed shelf gratings, folded on both sides Width: 1,112 mm Length: 890 mm Mesh size: 106 x 72.5 mm Wire thickness: 3.8 mm Number of beams: 4 pcs. Unit weight: approx. 5.14 kg Application: Compartment size/ modules required per subject 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat dust leche: On request we can provide you with heat dust (see pictures) offer for sale; Prices on request. Fire protection places special requirements. Therefore, the wire mesh can be provided with a welded heat dust lech. And if you need a slip-through protection for cardboard boxes, ...

Used KAR 1 cardboard box closing machine. The device is used to automatically insert the tube into the cardboard box. The cartons are previously unfolded and pressed into special slots on the chain conveyor. The box passes through the individual slots, activating subsequent actuators closing the box. At the end of the transporter there is a receiver that takes out the cardboard boxes. Packaging of 3 pieces takes place on the conveyor belt, and then it is turned by 90 degrees and taken out of the machine.

MACHINERY CO2 1610 WiFi 160 W laser was built by the Polish company Technologie CNC in 2019. The machine is designed for engraving materials made of glass, ceramics and marble, as well as cutting such materials as acrylic and plywood. The machining process is performed on a large work table with a length of 1600 mm and a width of 1000 mm, using a powerful CO2 laser, guaranteeing high cutting speeds as well as the highest precision and quality of machining. The laser engraving machine supports the most important graphic formats such as DST, PLT, BMP, DXF, AI and the most popular graphic programmes such as CorelDraw, AutoCAD or Photoshop. The installed WiFi module allows for wireless communication with the machine. Along with the MACHINERY CO2 1610 WIFI laser engraving machine, equipment is offered consisting of an unused knife table and rotary axis, a CW 5200 liquid cooler and a dust e ...

Baler Presto CC 20 M, year of construction 2016, pressing force 20 t Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Binding: 3-fold Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2,3 t 100 kg/m³ - 2,8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: ca. 2500 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Post welding wire and electrodes approx. 1,000kg New, unused, original packaged. Posten Welding accessories consisting of Welding dredging roller for inert gas welding machine MIG MAG Predominantly welding wire diameter 1.2mm, per roll 15kg z.B. Union A 600 IG Various electrodes e.B. Nickel A Originally packed in a cardboard box and sealed by welding in kunsstof film. Special price

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Rated current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32.000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large digit displ ...

Description automatic carton setter Keck SK 5 Ft with new Baumer hhs adhesive application system. consisting of Xtend C-421 4 channel control, 4 pieces DLK 404 valves, 15 liters cold glue pressure vessel Year of construction 2004 Operating hours approx. 3800 cardboard formats in the appendix – currently set up for the tomato box. Cleaned, repaired and adjusted. Ce declaration, machine manual, electronic drawing In the video there are no safety doors – but the machine has new safety doors included Power Minimum 2300 / hour Maximum 10000 / hour Optimim 3-5000 / hour FORMAT RANGE tomatoes-paper-tray

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width with additi ...

This robust baler is ideal for pressing paper waste from small and medium-sized printers and bookbinding companies. It can be filled manually or automatically, and pressing is also done automatically or manually. Pressure 14 Mp = 137 KN Engine power 1.5 kW at 380 V / 50Hz Bale size approx. 600 x 600 mm

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...

Offer Double-sided adhesive tape 3M GT6008 Acrylic Foam Tape 64 rolls of 900m 12 mm wide in cardboard boxes on pallets (picture 1-2 samples, 3 Total stock & 4-7) The double-sided tape is sold by our customer due to a change in business. It is ready for use and can be kept until August 2024. 3M's GT 6008 tape is made of a medium density grey acrylic foam. Manafacture: 3M Type: GT6008 F Number of Rolls / Packages: 64 Length on the roll: 900m Width 12mm Colour: grey Thickness: 0.8mm Temperature resistance: short: 160C long: -40 to 120°C Packed on 4 pallets Weight: 880 kg in total Features (info from the web): -good adhesion to a variety of automotive surfaces -good internal strength -excellent long-term stability -very good adaptability to the surfaces to be bonded -uniform viscoelastic property -Extremely durable connections Adhesive tape 3M GT6008 Acyl ...

Eyelet machine, riveting unit Eyelet size 5,5mm Demonstration device As good as new , suitable for paper , cardboard , leather and foil

machine measurements: 2.430 x 1.110 x 2.360 mm machine weight: -- kg power capacity: 2,2 kW Condition: used Specification: 3-chamber baler, type: 8020 E.F.G. The baler is suitable for simultaneous pressing of paper, cardboard, foils & cans at the same time. The machine works automatically after starting. The plunger is moved manually over the chambers. The third chamber is currently in storage, but can be added without be added without any effort. - Press force: 20 t - Cycle time: 25 - 30 sec - Engine power: 2.2 kW - Total length with 2 chambers: 2,430 mm - Total length with 3 chambers: 3,650 mm - Total width: 1,110 mm - Total height: 2,360 mm - Voltage: 400 V, 50 Hz Bale dimensions L/W/H approx.: 1,100 x 800 x 800 mm Bale weight approx.: 200 - 220 kg The bales are tied with tied with 4 straps. Documentation in German, consisting of: - de ...

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.

Semi-automatic cardboard adhesive in special version with the possibility of double bonding by two adjustable adhesive heads Year of construction: 2016 Manufacturer: Pacbro Italy specifications: 3Ph 400V 50Hz 2A 220W Colour RAL 9016 / RAL 8017 Timing belt H = 65mm Bonding at the bottom not possible Original price € 4.800,00 The machine was in use for 3 months!

Baler Presto HPK 50 HS (HPK 750 H), year of manufacture 2013 Manafacture: Presto Type: HPK 50 HS (HPK 750 H) Year of construction: 2013 Hours: 3788 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.

Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!

with 3 compression chambers, from 30 t to 150 t material quantities per year, vertical, for cardboard, foils, canisters, PET bottles, 200 kN, volume reduction up to 90%, ball weight 250 kg,

Baling press cardboard foil MF100 | 6 t pressing force The MF100 balers are ideal for pressing cardboard, paper, film, clothing and other materials. Volume reduction through compaction of up to 90%. The press is user-friendly with a large filling volume. The automatic bale ejector helps to remove the bales from the baler without any problems. Characteristics: Bale weight of up to 100kg Ideal for use with medium material volumes Fully automatic bale ejection Powerful cylinder for uniform material compaction Hold-down device to reduce material springback CE certified Made in Europe Specifications: Pressing force: 6 t Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2371 x 1388 x 1046 mm Transport height: 1876 mm Machine weight: 632 kg Cycle time: 28 seconds Noise level: 65 decibels Bale: Ba ...

automatic full punch for cardboard & plastic Manufacturer - Ruge & Singer Model: 7404 Year: 2010 Location: germany Material Condition - used, little time in use, as the purpose is no longer given. Accessories - tool kits Price: on request

Baler V8 | 8t pressing force. Press for cardboard, foil, paper. V8 MEDIUM-SIZED BALER Our V8 baler is versatile and offers medium-sized companies that need to process a range of materials, including bulky objects and packages of different sizes, with excellent value for money. The V8 produces bales that fit perfectly on a Euro pallet and is suitable for pressing cardboard, plastic, textiles, paper, polystyrene and food waste Recommended for supermarkets, gas stations, department stores, hotels, factories and logistics centers. Bale size: 800 mm H × 950 mm W × 600 mm D Bale weight: 100–180 kg Pressing time: 33 seconds Pressing force: up to 8 tons Dimensions: 2270 mm H × 1100 mm W × 745 mm D Filling opening: 950 mm W × 485 Integrated bale ejection mechanism Weight: 425 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN  ...

In the inlet - Baling press Strautmann, type BaleTainer, pressing force 60 t, year of construction 2014 Specifications: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of construction: 2014 Pressing force 60 t Total power 9.0 kW, 400 V Height filling opening 1370 mm Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 slices) Binding 4-fold vertically Machine dimensions with feed: 6,500 x 2,113 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Materials: paper, cardboard, PET bottles, foil Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without  ...

We offer you here a used steel panel for sale. Cardboard boxes can be used on steel panels, Optimal storage of small parts or stacking boxes. Included in delivery are: 01x Steel panel, used Material color: sendzimir galvanized Total depth: approx. 1,110 mm Clear depth: approx. 999 mm for stand depth: approx. 1,100 mm for truss width: up to 50 mm Total width: approx. 295 mm Height: approx. 45 mm Material thickness: approx. 2 mm Weight / pcs.: approx. 6.65 kg

Vertical baler Strautmann PP 1207 Manufacturer: Strautmann Type: PP 1207 Year of construction: 2002 Pressing force: 58 t Total connected load: 4.5 kW Height filling opening: 1145 mm Filling opening: 600 x 1190 mm Press cycle: 37 sec. Bale size: max. 1180 x 700 x 800 mm Bale weight: up to 350 kg Dimensions: 1844 x 1067 x 2868 mm Weight: 2400 kg Materials: paper, cardboard, cardboard, foil, plastic, PET bottles, tin cans Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

We offer you 200 used steel panels for sale. Cardboard boxes can be used on steel panels, Optimal storage of small parts or stacking boxes. Included in delivery are: 200x steel panels, used Material color: sendzimir galvanized Total depth: approx. 1,110 mm Clear depth: approx. 999 mm for stand depth: approx. 1,100 mm for truss width: up to 50 mm Total width: approx. 295 mm Height: approx. 45 mm Material thickness: approx. 2 mm Weight / pcs.: approx. 6.65 kg

automatic baler Manafacture: UNOTECH Type: UPAMAT 100 V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Duct format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Output: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large-digit display  ...

Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"

Amtmann Fassong banding machine / laminating machine. Year of construction: 1986 Step 1: Foil blanks are separated from the stack by the vacuum plate and partially glued via the gluing unit Work step 2: The A4 cardboard blanks from the additional cover sheet feeder with conveyor belt are separated and transported to the transfer position. Step 3: The partially glued film blank is transferred to the positioned A4 cardboard blank for transfer to the final position. Step 4: Transport by means of a pressure unit. Suitable for solid, shape, edge or strip gluing, depending on the design of the glue transfer roller in time, from different carriers, such as punched blanks, etc. The Fasson banding machine is designed to speed up the production cycle.

Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...

1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing machines and on to the inle ...

LIQUIDATION of labeling and automatic weighing train of the German manufacturer BIZERBA model GV1260.  Automatic labeling and weighing system for packaged products in the food area, cardboard boxes, large containers. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of ribbon width 650 mm long x 600 mm wide. Minimum and maximum dimensions of the package: length 100 mm-600 mm, width 50 mm-600 mm, height 20 mm-350mm. External dimensions of the machine: (mm) 2150 long x 1000 wide x 1880 high. Thermal print head - 8.0 point resolution. Weighing from 5gr to 30.000gr. Maximum labeling capacity 32 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and ...

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Digital printing machine Manufacturer: Meteor Model: DP 8700 XL with two fusers: • one for envelops • one for plane paper & cardboard Including: • Fiery RIP (Raster Image Processor) • complete maintenance (just done) • new parts to print ± 0,5 mio without costs. The machine is existing of 3 parts on wheels. Condition: The machine is still in operation available: immediate location: Belgium Price: on request

Automatic rotary traysealer from the manufacturer VC999, model TS900. It is a traysealer made in Switzerland, with rotary table in 4 positions. The machine is prepared to make up to 4 containers at the same time: only sealing, empty/sealing and vacuum/sealing/modified atmosphere. It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. VC999/TS900 has been designed to offer a compact solution (occupies just under 3m3) and allows, thanks to a high technological content, to meet high production needs (up to 2400 pieces / hour). The solidity and versatility of this model, together with an optimal value for money, have made the VC999/TS900 one of the most successful and highest quality machines on the world market. Built with first-class components, with exclusive noble materials (stainless steel and anodyne ...

Liquidation of ILPRA automatic traysealer of the FOODPACK series, model 500 v/g. It is a traysealer of Italian manufacture, with rotary table in 2 positions. The machine can perform 4 different packaging functions: sealing only, vacuum/sealing, vacuum/sealing/modified atmosphere (MAP). It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. Foodpack 500 has been designed to offer a compact solution (occupies just under 2 m / 2 ) and allows, thanks to a high technological content, to meet high production needs (up to 1440 pieces / hour) depending on the type of mold from 1 to 4 containers per cycle. The solidity and versatility of this model, together with an optimal value for money, have made the Foodpack 500 V/G one of the most successful machines. Built with first class components, with exclusive noble materia ...

Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000) mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!