We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,921 used machines on RESALE, but how to find them? Machine Search
used
Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported ove ...
used
Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.
used
Technical data: model: RMH DK 50 x 70 machines dimensions without preloading box / side case box L x B x H / in metres: 4.46 x 1.34 x 2.43 loading box dimensions L x B x T / in mm: 1.575 x 840 x 700 parcel dimension in cm: 50 x 70 x material amount engine kW / volt: 22 / 400 ground rams pressure in T: 100 working pressure in BAR: 240 Presszyklus/seconds: 75 weight in kg: 7300 control: By hand / Automatk all machines are delivered in the state kind equipment with hand lever control and oil cooler. Optionally with lateral preloading box and radio control available.
used
Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available
used
Bulk baler / square baler, manufacturer: KRONE, Type: Big Pack 1290 HDP VC, Year of manufacture: 2019, Total weight (kg): 13,000, Serial no.: WMKBP404S01034005, Model year 2020, Number of bales according to information: approx. 25,000 pcs., HDP baling channel, Pickup approx. 2.35 m, 6 double knotters, knotter cleaning, yarn binding, dust-proof yarn box, bale ejector, bale ejector, air brake system, electronic monitoring, Isobus, steering axle, tandem axle, K 80 ball-head coupling, drive shaft,
used
Cardboard dimensions L min/max 200/650 mm W min/max 150/450 mm, H min/max 120/500 mm Working height 680 mm, format to be adjusted via hand crank, Folding the 4 floor flaps pneumatic operation 6 bar air Power 5-7 cycles /min - product-dependent
used
RICE Category Paletizer Type: RP40 Name of Reis Robotics Manufacturer of rice Serial number 36/xxxxx Year of manufacture 2003 Performance 7 pallets / h. Dimensions approx. 3.000 x 6.000 x 4 000mm Electric 400VAC 50 Hz, 35A PLC type S7 Siemens Control panel touch screen Color red Condition very well maintained, like new Load capacity: 40 kg additional load: 20 kg Repeat accuracy + / - 0.3 mm Number of axes 5
used
Bag inserts from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957
used
Pack carton packages into trays
used
Ford cardboard stitching machine; good condition; Long sleeve; suitable for flat wire; 380 volts; Exit via foot switch.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
we sell 1 of 2 used tray / carton setup with an additional magazine for a package leaflet or e.g. Spoon that is placed in the box and glued to the bottom. The tray / carton erector has 2 Nordson hot glue devices (Pro Blue) each and is completely built in V2 A (also the control cabinet). The system is adjustable in terms of cardboard height and width as well as length, but are set to a currently fixed level. The systems are in a very good used condition as they were in stock after a factory closure (optical condition is almost as new). The special feature of the system is that a vision system (by KEYENCE) is installed in the system, which can check a correct insertion of the package leaflet or the spoon and can stop the system if it is not executed correctly (looks at the tray from above). The system is immediately available and could also be converted to other tray types (stacking corner ...
Cardboard labeler with wet glue
used
"Packaging plant "Kombipacker 3 in 1" for the production of sales and transport packaging. Different packaging can be produced for me. It combines the functions of erecting and closing cardboard as well as the Top Loading function. In addition, both containers and loose bottles can be packed in cardboard. Packaging options - Lots 0.33 l bottles in 24 carton (12 carton optional) - Lots 0.5 l bottles in 20-caran (10-karton optional) - 4 baskets (2 x 3 ) each with 0.33 l bottle in a carton - Baskets 2 x 3 individually - 4 six-packs (2 x 3) with 0.33 l bottle to be packed in a carton Performance of the packaging machine Cartons: max. 10 cartons per min. Bottle types: 0.33 l LN or Vichy, 0.5 l NRW or 0, 5 l LN, 0.33 l Euro Baskets : 16 baskets per min. either in cardboard or individually Other types of bottles or containers may be possible. Must be examined in detail."
used
- Buhmann, Type C400 - Built in 2010 - with step folding - Stacking corner bonding - Gluing unit - Soil folding - different cardboard dimensions
used
Automatic gluing and strapping machine by Normpack - used - : Prices from location: 19.950.-€ (net) Manufacturer: Normpack Type: X67-70-2175-NPS-504-L Year of construction: 2009 Weight: 490kg 400V, 1.7kW, A 4.5 Condition: good Available: from now on Location: 79664 Weir
used
1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.
used
Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format
used
Belt conveyor (here in use as empty cartons or waste disposal line), approx. 315m- used - : Price ex location: only 39.500.-€ (net), dismantled, packed and loaded! Manufacturer: Marting Year of construction: 2017 Belt width: approx. 80cm Element width: approx. 87cm plus motors Height of the side plates 15cm Condition: good Available: from about March 2022 Location: Czech Republic
used
Including documentation and circuit diagrams.
used
FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine was built by the Chinese brand FOSHAN OCPACK PACKAGING MACHINERY CO.,LTD. in 2021. Reliable and easy to operate machine, performs the process of automatic packaging of a wide range of products i.e. food, medicines and cosmetics into cardboard boxes with maximum dimensions of 130x80x210 mm. The items are transported by conveyor belt to a designated area, where they are stacked and pushed inside the box. A microcomputer together with a photocell controls and ensures that the packing process is performed accurately. The automatic carton box packaging machine is equipped with an OMRON HMI panel and an emergency stop button. The total weight of the machine is approx. 1300 kg. Technical specifications of the FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine - HMI panel: OMRON - maximum box dimensions (L x W x H): 1 ...
used
Carton stitching machine Speckboetel GFM; good condition; cleaned and tested; longitudinal or transverse stitching; .max. Staple thickness 3mm; Arm length 500mm; suitable for wire 21 and 23. Cardboard wire stitcher Speckboetel GFM; good condition; cleaned and checked; for lenghtwise and cross stitching; max.thikness 3mm; length of arm 500mm; used for wire 21 and 23.
used
Overview The cardboard packer is located in Spain and is completely overhauled so that it can be shipped without problems. This machine gathers bottles, cans, etc. and places them in a cardboard sheet, which is then compressed to form a closed box. The maximum speed is 45 cartons per minute, depending on the format. The programmed machine can produce different formats.
used
Min 0,2 kg.Max 30,-kg. More then 300 machines new and second hand on our seema .de
used
ETT TFS40C tray former with Nordson ProBlue 4 hot melt unit, electrics 3x400V/50Hz, power 15 kVA, compressed air 6 bar, Siemens SIMATIC S7-300, machine net weight approx. 1570 kg, includes format parts for tray sizes of 135x90x35 mm, 147x108x35 mm, 150x100x35 mm & 159x106x35 mm (LxWxH), capacity up to 40 trays per minute
used
Endoline 402 Automatic case gluer Serial: 160875617-2 2016, fully automatic case gluer, up to 30cases per min, cases between 160mm - 500mm L, 100mm - 400mm W, 100mm - 500mm H, with Nordson problue gluer, infeed conveyor 2500mm x 500mm, roller conveyor on outfeed section, 3Ph
used
Kopp B100 FF Folding Wrapping Machine Folding wrapping machine, also known as cellophanier, for all heat-sealable films, including recyclable or compostable films Fully automatic packaging machine for the medium output range. The longitudinal sealing seam is attached to the bottom of the product. The sides of the box are closed over the entire surface. Easy and extremely fast format changeovers thanks to quick-change format sets Clear control panel for setting all important machine functions Applications In all areas where cuboid products are used, the cellophane maker can be used BX100FF, including as a banding machine. For packaging tablet boxes in the pharmaceutical industry, in the tobacco industry as a case packer for the production of cigarette containers, as protective packaging in the food industry for coffee, tea, chocolates and confectionery or in the toy indu ...
used
Heavy Cardboard Bending Machine & Corner Protection Press Grooving machine AB: 1300 mm Groove width: 2-12 mm Additional function: Press in protective corners plus various protective corners !
used
Cardboard strapping – used- : Price per piece ex site: 595.-€ (net)! Manufacturer: unknown Model No.: TP-202CE Machine number: A72796 Power: 7A, 230V/50, Phases: 1 Year of construction: 08/2018 Weight: 85kg Original price: according to the Jungheinrich shop approx. 1.400.-€ Condition: good Available: now Location: Wenkbach
used
Format Range: max. 800 x 800 mm Equipment: Corrugated box packaging machine for longitudinal seam, 4+6 dot boxes, stack height max. 360 mm, stacking chute, pneumatic parcel removal, new main drive motor, new Siemens control system, new electrics / electronics. Other: The machine can be viewed while it is running, by arrangement.
used
Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg
used
Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -with: balancer and compressed air hose -adjustable depths: 5 -for staples: 32 mm wide -Dimensions: 390/100 / H210 mm -Total weight: 3.4 kg
used
Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -adjustable depths: 5 -Dimensions: 210/100/H400 mm -Weight: 2.4 kg
used
Cardboard Gluing Machine / Cardboard Gluing Machine / High Speed Semi-Auto Gluer Godswill GSG - 10 Type: GSG - 10 Speed: 40 m/min (40 - 50 arcs/min) Sheet min: 525 x 240 mm Sheet max: 3000 x 1800 mm Adhesive ash max: 45 - 50 mm Stacking height: 850 - 1000 mm Connected load: 4 HP Weight: 2550 kg Dimensions: see drawing Machine is in very good condition. Dismantled and ready to be picked up.
used
Machine: Boxmaker LCR Manufacturer: LCR Lorenzoni ( Bo. ) Model: Quark 2500 A Year of construction: 2007 Condition: very good (used) Carton machine type Quark 2500 A for processing continuous cardboard from the stack The following language changes are possible: German English Italian French Machine Description: The machine listed here belongs to the series of static machines, i.e. the operations transverse to the machine are carried out on the upright carton. The machine is designed for high productivity. The maximum working width of the cardboard box is 2,400 mm. All settings of the tools are carried out automatically. 1) Main Machine Body (Carton Cutting Machine): Linear cross-cutting group for head-to-foot cutting and Cross-cuts on the cardboard box. Linear transverse groove group for the transverse grooves on the carton. ( Supplied as trans ...
used
Carton Packing Machine Manufacturer: EMSIZE / Packsize Model No.: EM4-25 Continuous Corrugated Cardboard Year of construction: 2002 Condition: Ready to use (used) Location: Porta Westfalica Carton machine type EMSIZE / Packsize for processing continuous cardboard from the stack Machine Description: The machine listed here belongs to the series of static machines, i.e. the operations transverse to the machine are carried out on the upright carton. The machine is designed for high productivity. The maximum working width of the cardboard box is 2,400 mm. All settings of the tools are carried out automatically. Retail price: € 9.500,--
used
-Inlet width padding: unlimited -Cutting width padding: 420mm -max. inlet height: 20mm -Working height: 890mm -Dimensions (H x W x D): 110 x 75 x 80 cm -Motor power 4.0 KW -Main voltage: 200 - 400 V / 50 - 60 Hz -Production capacity: 7-10 m3/h -Feeding speed: 16m/min -Noise emission/idle: 64DB (A) -Noise emission / duty cycle: 78 dB (A) -Weight: 295 kg Legal Provider Identifier: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 0484780680 Fax: 04847673 E-mail: shopweidezaun.info VAT number: DE310055793 WEEE Reg. No.: DE 35840253 registered in the commercial register of the district court of Flensburg Company registration number: HRA 9110 FL represented by the general partner VOSS management GmbH represented by the managing director Fabian Seidl, Reiner Voß Ohrstedt-Bhf-Nord 5, 25885 Wester-Ohrstedt, Germany registered in ...
used
Universal like a handheld device, regardless of package size. If the daily volume of packages is limited, the M-PAC 3 comes into consideration. - For belts 5 – 15.5 mm wide, adjustable - 10 – to 20 strappings/min - Mobile, with lockable swivel castors - Package sizes independent - Adjustable working height - Weight: 50 kg The bandwidth depends on the weight of the package. From a weight of 20 kg, the width should be 9 mm. Attention: Belt rerouting by the operator! This is not a fully automatic machine!
used
Cardboard strapping, Mosca, RO-TR 5, fully automatic –used-: Price per piece ex location: only 3.950.-€ (net) Manufacturer: Mosca Type: RO-TR-5 Year of construction: 2010 Currently, the machines work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm Nr.: 875 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2.5 A Control Voltage: 24V, DC Condition: good Available: now Location: Hanau area
used
3 pieces of cardboard strappers, Mosca, RO-TR 700-4, fully automatic –used-: Price per piece ex location: only 3.950.-€ (net) Manufacturer: Mosca Type: RO-TR 700-4 Year of construction: 2005 Currently, the machines work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm No.: 80527 etc. 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2.5 A Control Voltage: 24V, DC Condition: good Available: now Location: Hanau area
used
Packaging Station/Adhesive Station, Year 2018 Serial Number 18041781-259 Maximum throughput height approx. 600 mm on steel, undercarriage runway
new
Professional packaging machine from a reputable European manufacturer: -Suitable for tape width up to 50 mm. -Maximum box dimensions according to the manufacturer's instructions approximately: width 500 mm x height 500 mm; length unlimited. -Double-sided closure of the packages at the top and bottom. -Different carton formats are adjusted in height and width via cranks. -Transport speed approx. 20 m/min. Output approx. 800 cartons per hour. -Working height of the machine infinitely adjustable. The scope of delivery also includes: -4 casters with brakes for the carton sealing machine. If necessary, the machine can also be moved. -2 sturdy steel roller conveyors, each 1m long, for attachment to the inlet or outlet of the carton sealer. -Documentation consisting of operating instructions for the machine and the gluing unit.
used
Overview This wrap-around cardboard packer was built in 2008 by Italian manufacturer SMI. The machine is still installed and can be viewed in person. Techn. Details Capacity: up to 45 packs per minute Recently packed: 3x4 cardboard, 0,75L glass bottles Other formats possible Working hours: 1,752 POSYC 3000 Touch panel
used
- 1 gripper head - Parts available for a wide range of bottle formats - Parts available for a wide range of carton formats - Machine in very good condition
used
Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm
new
THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...
used
Channel baling presses Lindemann Type Bimax BJ 1974. Last overhaul 1994 El. Power 5 x 22 KW production output power up to 25-30to/h Max pressure 300 bar pressure 100to bale dimension 1100 x 1000 x 1300-1500 bale weight 510-780 kg setting steel wire 5 x 3, 1 mm with conveyor belts and paper opener. very good condition. with conveyors and paper opener. very good condition. Contact us by mail unter:rerec@web.de or mobile: 0049 160 96232593
used
Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...
used
Waster Baler BTS-MF75 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 75 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2335 x 1040 x 720 mm Transportation height: 1800 mm Machine weigh ...
used
PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing ...
used
Waster Baler BTS-MF60 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 60 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1996 x 1040 x 720 mm Transportation height: 1630 mm Machine weigh ...