48 offers carbonated

Category: 401 filling machines
Latest update: 03.06.2020 No.: 146662137
New in: 1997
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Filler Block for Still and Carbonated Water SARCMI Bluestar in PET Bottles This PET bottle filler block is from recently dismantled line and it has been filling still and carbonated water. Delivery includes AROL caper and SASIB pneumatic cap feeding system. Dismantling was made by SIDEL service. Originally this line was installed in 1997 and was in operation until the beginning of 2018 when it was professionally dismantled and equipment is now in a warm warehouse. Manufacturer: SARCMI / SASIB Type: Bluestar 40-80-12H P132 Year: 1997 Capacity: 25 000 bph in 0.5 liters Container: PET 0.5 and 1.5 liters Neck finish: PCO 1810 (long neck) Filling principle: Isobaric Number of filling valves: 80 Number of rinsing heads: 40, single rinsing Filler pitch: 132 mm Screw capper: AROL, 12 closing heads Cap feeder: SASIB SP-10, pneumatic, year 2007 Control PL ...

Category: 706 beverage machines
Latest update: 15.07.2020 No.: 146205495
approved
dealer
New in: 2016
used
Seller: country-de hbtech maschinen

This line is an automatic filling line for glass bottles for still and carbonated products. It is a hot and cold fill line and therefore can also produce hot filled tomato juice. Milk production is theoretically also possible, but adjustments might be necessary. Capping possibilities are aluminum, crown cork and twist off caps. All machines in line have been overhauled in 2016. All controllers are Siemens S7. Characteristics: Pack conveyor (empty) Paxona Pack conveyor (full) Meypack Unpacker KHS Consul A6 Container transport Paxona Foreign bottle detection Bbull/Centro Format 3000 Decapper KHS Innopak Crate washer Klotzki Capacity: 3.600 C/h Bottle washer Krones KDF-4,5 356/29-110 Capacity: 13.000 – 40.000 bph Rinser VT Zürich A-3-V-W Capacity: 45.000 bph Filler KHS Rola-Tronic H1/100/15/15/SVKK Capacity: 200 ml 30.000 bph 250 ml 30.000 bph 750 ml 20.000 bph 1000 ml ...

Category: 401 filling machines
Latest update: 22.06.2020 No.: 146649363
New in: 2004
used
Seller: country-fi JADE Trading OY

This filling line is suitable for carbonated and non-carbonated water and soft drinks. The line was installed in 2004 by SIDEL and it is still in operation till spring of 2020. It is a complete line from blow molding to palletizing and pallet wrapping – only PET compressor, bottle and pack conveyors are not included Equipment is well maintained and in good condition. Main characteristics: Capacity 14 000 bph in 1.5 and 2.0 liters PET Type of product Carbonated and non-carbonated soft drinks Manufacturing year 2004 Neck format PCO 1881 - 28 mm, short neck Pack type Shrink pack 2x3 List of main equipment: • Blow molder, SIDEL SBO 10 Serie 2+, bottle formats 1.5 and 2.0 ltr, delivery includes molds, chiller, preform hopper and feeder • Rinser-Filler-Capper SIDEL, type RV-P60/80.10KAOR with 80 filling valves and 60 rinsing positions, capper AROL with 10 capping h ...

Category: 401 filling machines
Latest update: 05.06.2020 No.: 146688325
New in: 2007
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

This mixer was made in 2007, refurbished in 2018, still in operation till 02/2020 and in excellent condition. The Moravek mixer model CE/J is designed for automatic production of a wide range of carbonated and still beverages from water and syrup with maximum capacity of 280 hl/h. It is suitable for all types of carbonated beverages and soft drinks as well as both natural and flavoured mineral water and still and low carbonated beverages under an inert gas atmosphere (like ice-tea and energy drinks). CO2 content range is from 0 to 9 g / litre. Moravek mixer is simple and easy to use. It has fully automatic cleaning procedures and beverage production can be changed simply and easily with up to 20 different recipes saved on PLC. Mixing is batch based and does not require the dosing of the pump. Mixing is electronically adjusted making the process highly accurate. The mixer has Allan Br ...

Category: 702 breadmaking and confectionery machines
Latest update: 10.05.2018 No.: 125203669
New in: 1999
used
Seller: country-de Middle East Trading
Price: 65.000 €

Manufacturer: CES Year: 1998 and 1999 Some are still in production Spiral I: Spiral used for bread Model CES CO2 spiral freezer Manufacturer: CES Year: 1998 15 Levels Space between the levels: 14,5 cm Belt width: 375 mm Belt length: 123 meter Freezing time: 12 to 60 minutes Infeed height: 377 cm Discharge height: 68 cm Stainless steel housing L=4,7 meter, W=3,76 meter, H=5,0 meter Electrical detail: 220/380V- 3Ph-50 Hz Controlled with Siemens PLC The CO2 carbonated gas buffer tank is not included. Spiral II: Spiral used for buns and rolls Model CES CO2 spiral freezer Manufacturer: CES Year: 1999 16 Levels Space between the levels: 14,5 cm Belt width: 580 mm Belt length: 188 meter Freezing time: 12 to 60 minutes Infeed height: 380 cm Discharge height: 67,5 cm Stainless steel housing L=5,50 meter, W=3,60 meter, H=5,20 meter Electrical detail: 220/380V- 3Ph-50 Hz Controlled with Siemens PLC ...

Category: 401 filling machines
Latest update: 02.06.2020 No.: 146649398
New in: used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Complete Filling Line for New and Returnable Glass Bottles 20 000 bph This filling line is very versatile and can fill both carbonated and non-carbonated drinks and juices, hot fill and cold fill, returnable and one-way glass bottles sizes from 200 ml to 1000 ml. Caps sizes 28 mm crown and screw cap. This a complete from bottle decrating and uncapping to secondary packing, crating the bottles and palletizing the crates. NOTE: Labeling machine and label inspector are not a part of the delivery. The line has a two pasteurizer, tunnel and flash pasteurizers, bottle washer and a rinser, and it can operate both new and returnable bottles. The line is installed and operational until the beginning of 2020, and it can be inspected while operating. Main characteristics: Capacity: 20 000 bph (in 200 ml), 10 000 bph (in 1000 ml) Bottle sizes: 200 ml, 250 ml, 750 ml and 1000ml  ...

Category: 706 beverage machines
Latest update: 15.07.2020 No.: 147230802
approved
dealer
New in: used
Seller: country-de Seegräber GmbH

Overview for PET PCO 1810 production line for carbonated and non carbonated soft drinks and water Production Speed 15.000 to 18.000 bottles for 0.5 l, 1.5 l and 2.0 l bottles each hour The line consists of: 00 beverage process GEA VT40 LOC IN 1999 01 blow molding machine Sidel SBO14 2002 02 air conveyor NTS 1997 03 closure transport Zalkin CA5 1997 04.1 rinser-filler-capper Alsim 80-90-10 1997 capper Adelski OT PP2010 2003 ultrasonic unit Cavitus 2015 sterilisation spray unit Innowatech GXL 2011 04.2 chemistry centre Ecolab 2002 05.1 mixer Alsim 1997 05.2 mineral water treatment Wedeco Spektron 70 2008 06 quality control filler Recop Relecon 2001 07 bottle conveyor Sidel 08 labelling machine Krones Canmatic 720-15 1997 09 quality control labelling machine Recop 10 shrink wrapping machine Cermex TSM452SDI 1997 11 handle applicator Comag H 50/2 1997 12 label dispenser Stralfors 0-B492- ...

Category: 706 beverage machines / Bottle filling plants
Latest update: 04.06.2020 No.: 146671956
New in: 2010
used
Seller: country-fi JADE Trading OY

Complete ultra clean – aseptic filling line for carbonated and non-carbonated juices, soft drinks, cider, water made by Krones and GEA in 2010. The line has been operated around 40 000 hours and always serviced by Krones service and thus in excellent condition. Rinssing, filling and capping compartment of the line is aseptic and filled with CO2 gas. The line has modern Krones Contiform Bloc where blow molder is directly connected with ultra clean - aseptic filling bloc without air conveyor. Filling valves are sterilized with steam and the rest with Preracetic Acid C2H4O3 solution. Process department is made by GEA and it can produce various fully aseptic products and other beverages. Packing department has very versatile Krones Variopac Pro for shrink, shrink tray and a new in year 2015 Krones Robopox palletizer

Category: 706 beverage machines / Filling installations
Latest update: 03.07.2019 No.: 74360663
approved
dealer
New in: used
Seller: country-es INTER-MAQUINAS AGUILAR S.L
Location: Lorquí (Murcia)

Filling group 33 cl 202/211 Speed up to 60.000 cans/hour Suitable for carbonated and non-carbonated beverages. This group is composed by: -Can rinser -Automatic end unwrapper feeder CSW -120 valve filler KHS -Can seamer ANGELUS 120 Litres -Can s cover detector HEUFT Please find the link to a Youtube video with this line operating: abcs://abc.youtube.com/watch?v=IYgfPFn8ElI&feature=youtu.be

Category: 706 beverage machines
Latest update: 11.12.2019 No.: 216940
approved
dealer
New in: used
Seller: country-de MET-TECH GMBH

1997, 0.33 - 1.0 L, MINERAL WATER CARBONATED & NON-CARBONATED, DRINKS, BEER ETC. DE- & PALLETISER, WASHING MACHINES, MONOBLOC, LABELLER, SYRUP ROOM ETC.

Category: 706 beverage machines
Latest update: 15.07.2020 No.: 146291570
approved
dealer
New in: used
Seller: country-de hbtech maschinen

Complete automatic ultra clean filling line for carbonated soft drinks, water made by Krones and GEA in 2010. The line has always been serviced by Krones itself and thus, is in excellent condition. Rinsing, filling and capping compartment of the line is ultra clean. Blow molder is directly connected to the ultraclean bloc without any air conveyor used. Characteristics: Manufacturer: Krones and GEA Manufacturing year: 2010 Filling process: Ultra Clean Suitable for: Carbonated drinks Current product: Apple juice with water and CO2 Currently used container sizes: PET 0,5 l, 1,0 l and 1,5 l Neck format: PCO 28mm - 1810 - 1881 short neck Capacity: 24.000bph for 0,5 l and 18.000bph for 1,5 l Control PLCs: Siemens Simatic S7-series Working time: approx. 40.000 hours List of main equipment Krones VarioClean F AUT Fully Automatic CIP System 4 x 5000 liters, 30 m3/h KB80279 GEA TDS Process ...

Category: 706 beverage machines
Latest update: 04.06.2020 No.: 146674060
New in: 2002
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

PET Bottle Filling Line SIG Simonazzi 23 000 bph - 2002/2013 This line is a complete PET line for beer, carbonated and non carbonated drinks. The line iwas delivered in 2002 by SIG Simonazzi and it was upgraded in 2011/2013. Currently line is installed and powered and it is designed for 1.0 & 1.5 liter with capacity of 23 000 bph. Main characteristics - Manufactured in year 2002 upgrade 2011/2013 - Capacity 23 000 bph in 1.0 and 1.5 L containers - Total operating hours 38500 - Equipment is in very good condition, still installed but ready for immediate relocation. List of main equipment: 1. PET Stretch Blow machine Blomax 16 SIG, (operating hours 38217) with a. SIG Box Tipper for emptying preform containers b. Preform feeding elevator VZT-2510 with a hopper c. Preform orientator - feeding system d. Water chiller Riedel PC 1000 refrigerant R407C 2. Blower Automatic L ...

Category: 706 beverage machines
Latest update: 10.05.2018 No.: 125203629
New in: 2002
used
Seller: country-de Middle East Trading
Price: 1.200.000 €

Manufacturer: SIG Simonazzi Manufacturer\'s type: PET 1.0 and 1.5 litre Manufacture year 2002 Capacity 23 000 bph Operating hours approx. 38500 Uppgaded in 2011/2012 This line is a complete PET line for beer, carbonated and non carbonated drinks. The line was delivered in 2002 by SIG Simonazzi and it was upgraded in 2011/2013. Currently line is installed and powered and it is designed for 1.0 & 1.5 liter with  capacity of 23 000 bph.  Equipment is in very good condition, still installed but ready for immediate relocation. Line consisst of: - Blowing machine SIG Corpoplast Blomax 16, YOM 2002 - Rinser BLOCKRINSER Simonazzi 60 P113 with 60 rinsing heads, YOM 2002 - Monoblock TVR EUROSTAR 2000 Simonazzi, YOM 2002 - Modernization TVR EUROSTAR2000 to Drafts \"Money in PET\" (additional equipment) in 2010 - Modernization of the filler EUROSTAR2000 in 2011 - Mechanical Cup elevator, Simonazzi ...

Category: 706 beverage machines / Filling installations (aseptic)
Latest update: 30.01.2020 No.: 144842720
approved
dealer
New in: 2007
used
Seller: country-es MachinePoint

Complete Non-carbonated Aseptic Filling Line for drinks Filling technology: PET aseptic cold filling Line output: 18 000 bph Type of filling products: still and carbonated Bottle formats: 0,5L and 1,0L , 38mm neck Line conditions: excellent

Category: 401 filling machines
Latest update: 16.06.2020 No.: 293905
approved
dealer
New in: 1990
used
Seller: country-pl PW Joanna

Parameter: Capacity: 4000 - 16000 b / h Type of bottle: glass 0.5 l Year: 1990/2011 Designed for beer and carbonated drinks Mode of operation: Pressure Specifications: • Double evacuation; • 40 fillers; • 10 heads; • CIP; • Electronic control of pressure; • Control - Siemens S7; • Flow control; • Touch panel; • After a major refurbishment (thorough reconstruction of 2011);

Category: 706 beverage machines
Latest update: 18.03.2019 No.: 128898580
approved
dealer
New in: 2003
used
Seller: country-de Ebert Technologie GmbH
Location: 44265 Dortmund, Rankenweg 6

Dosenfüller Filling Systems mit Verschließer Sima, ISO-C 30-4, 10.000 cph, Baujahr: 2003, 30 Ventile, 4 Kopf Verschließer, Dose 202, 330 ml + 500 ml Sleek + Standard, stille und CO2-haltige Getränke, Siemens S 7 Can filler Filling Systems with can seamer SIMA, ISO-C 30-4, up to 10.000 cph, Made in 2003, 30 valves, 4 head seamer, can lid 202, 330 ml + 500 ml Sleek + Standard can, still and carbonated drinks, Siemens S 7

Category: 706 beverage machines / Filling installations (aseptic)
Latest update: 06.12.2019 No.: 11315478
approved
dealer
New in: 2001
used
Seller: country-de Eurolux GmbH & Co.KG
Location: 97753 Karlstadt
Price: 1.200.000 €

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

Category: 706 beverage machines
Latest update: 26.03.2020 No.: 135467802
approved
dealer
New in: 2004
used
Seller: country-de Kahl & Schlichterle

filling products: still water, carbonated water, softdrinks bottles: 1,5 ltr. PET bottles closing: PCO 28 mm plastic closure year of manufacturing: 2004 consisting of: 1. Blowing machine Krones type: Contiform S24 with 24 blowing stations with preform inlet and chiller with touch screen 2. Filler Krones type: Volumetic VODM-PET 5.040-140-113/ SV 15 pitch: 113 mm with automatic CIP valves with touch screen 3. Closer Zalkin with 15 closing heads with neckring handover power: 400 / 50 Hz complete safety-housing control: Siemens S7

Category: 706 beverage machines / Filling installations (aseptic)
Latest update: 09.07.2020 No.: 11315485
approved
dealer
New in: 2002
used
Seller: country-de Eurolux GmbH & Co.KG
Location: 97753 Karlstadt
Price: 2.238.000 €

Cat.-No. 14-00217 PET Line for still and carbonated drinks format: 1 L and 1,5 L, Production capactiy: 23.000 bph in a very good condition Year of construction: 2002 with intensive overhaul 2011-2013 working Hours: 38.217 machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2002 including molding box Tipper, inlet Cool Rahim PC 1000 2002 air conveyors 2002 beer analyser 2002 short time heater Simonazzi/GEA Ecoflex VT40 BC-25 2002 400 HL / h Rinser Saminazzi 2002 monoblock (filler, Capper SIG Simonazzi Eurostar 2000, Blockrinser 60 P113, Arol capper 2002) overhauled in 2010 and 2011 with capsule feeder and hopper Frothing device Diversy lever UAFS-002 2002 for filler Dosing pump 2012 level control 2002 Eitkettierer Krones Prontomatic K090 D49 2002 laser encoder video Jet VJ3430 2010 shrink wrapper SMI SK 600 T in 2001, 2013 overtaken tray shrink wrapper ...

Category: 401 filling machines / Bottle filling plants
Latest update: 02.06.2020 No.: 146649135
New in: 2015
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

This is complete and fully functional filling and packaging system for beer and carbonated drinks in aluminun cans and glass & PET bottles. Originally these lines are designed to fill beer and cider and pack them in carton (OT, NT and WrapAround). Packaging area has been build keeping in mind flexible filling needs of a craft brewery & cider plant and design allows to drive products through different processes and secondary packacing machinery. It has a capability to pack aluminium cans, one way glass bottles and PET bottles either with beer or cider. Glass and PET filling line with the followin main characteristics • Complete new machinery made in year 2015 • Capacity 2 litre PET 3800 bph and 8000 bph in 0.33 and 0.5 liter glass • Secondary packaging in OT, NT and Wrap Around Carton Aluminum can filling line with the followin main characteristics • Complete new ma ...

Category: 401 filling machines
Latest update: 03.06.2020 No.: 146661936
New in: 2004
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Glass Bottle Filler-Crowner KHS Innofill DMG 25000 bph This filler crowner was installed in beer line in 2004 by KHS but it has been operated very limited hours. It needs a proper service due to long standing without operation but otherwise it is still installed and in very good condition. The Innofill DMG is a mechanically controlled, over pressure glass bottle filler. Return gas tubes determine the fill levels. The machine is designed to bottle beer, soft drinks, as well as non-carbonated beverages in glass bottles. The filler has 66 filling valves and crowner has 11 capping heads. Filler and capper and the transfer stars are mechanically synchronized and are driven by an asynchronous motor. Filling vales have double pre-evacuation system with CO2. Control system in build on Siemes Simatic S 7 series PLC. Technical information Filler - Crowner type KHS Innofill DMG SVF ...

Category: 706 beverage machines
Latest update: 02.06.2020 No.: 146649396
New in: 1995
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Mixer KHS Intermix MC 45 This mixer-carbonator was made by KHS in 1995 and it has a capacity of 450 hl/h. The mixer is suitable for carbonated and still mineral water and two-component beverage. Mixer has a carbo blender installed. It is professionally dismantled and ready for immediate delivery. Manufacturer: KHS / Ortmann+Herbst Type: Intermix MC 45 Year: 1995 Capacity: 450 hl/h, 45 000 ltr/h Mixing ratio: 1:4 to 1:7 of syrup and water Control PLC: Siemens S5 / 135

Category: 706 beverage machines
Latest update: 06.07.2020 No.: 142200631
approved
dealer
New in: 2010
used
Seller: country-de Kahl & Schlichterle
Location: 35099 Burgwald, Rodaer Str. 4

Ultra Clean Krones Bloc year of manufacturing: 2010 capacity: appr. 24.000 bph based on 0,5 ltr. PET bottles capacity: apprx. 14.000 bph based on 1,0 ltr. PET bottles capping: PCO 28 mm plastic screw caps PCO 28 type 1810 Pitch: 103mm product: carbonated products like: energy drinks, water with gaz, soft drinks, apple cider, etc. very good condition consisting of: Krones Bloc (blowing, rinsing, filling, capping) - Krones Contiform S12M - Krones volumetric filler year of manufacturing: 2010 complete neck-handling machine new system bloc (without air conveyor between blowing and filling) Closing control and fill-heigh-control system Krones Checkmat year of manufacturing: 2010 incl. bottle conveyor A lot of accessories like tanks, heat exchanger, valves etc. incl. CIP, aseptic tank, GEA process unit, fill high control and closure control Videoj ...

Category: 706 beverage machines
Latest update: 06.03.2020 No.: 136479802
approved
dealer
New in: 1995
used
Seller: country-de Kahl & Schlichterle

CSD Filler Ortmann + Autumn 100 / 15 / 15 Counter pressure filler Ortmann + Herbst with Zalkin screw capper for aluminium screw caps and second crowner for crown caps has been filling carbonated soft drinks and mineral water with CO2 in glass bottles. The filler is still installed in Germany and can be inspected on side during production. The Ortmann + Herbst Hansa B filler is an incheasy-to-handle and very reliableinch mechanically controlled pressure filler for glass bottles. If you use nitrogen instead CO2 you can fill also products without CO2, like for example juice. The fill level is determind by the filling tube. In 2018 all 100 filling valves and the product inlet pipe as well as the inchproduct distributerinch were renewed. CSD Filler Ortmann + Autumn 100 / 15 / 15 Model: Hansa B Type: 100 / 15 Z / 15 KK - 115 Year of manufacturing: 1995 with 100 filling valv ...

Category: 401 filling machines
Latest update: 02.06.2020 No.: 146649404
New in: 2014
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Hot fill Filler-Capper Borelli Compact for 70 ml and 250 ml PET 3000 bph This automatic filling and capping monoblock was built by Italian Borelli company in year 2014 and operated only less than 10 000 working hours. Manufacturers type in Compact C12PK-AO and it is designed for hot filling of fruit and vegetable juices without CO2 in 70 ml and 250 ml PET bottles with neck sizes 28 and 38 mm. The filler is gravity type with 12 EVO 2 filling valves for hot filling. The capper is Arol Eagle PK with one screw capping head. The machine is fully automatic and in very good condition. The machine was dismantled in April 2019 and now in warm warehouse and ready for immediate shipment. Manufacturer Borelli Group, Italy Manufacturer's type Compact RMC12PK-AO Capper Arol Eagle PK Bottles used PET 70 ml and 250 ml Caps Screw P ...

Category: 401 filling machines
Latest update: 05.06.2020 No.: 146688062
New in: 2013
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

This in dry aseptic PET line and it is suitable for low-acid, pulpy and fibrous fruit juices, non-carbonated beverages, ice tea and dairy products. The hygienic level is so high that also milk-based infant formulas are possible. The line was installed in 2013 and is currently in production. It will be available in the summer 2019, and it can be inspected while operating. The delivery includes the product deaeration and pasteurizer, preform feeding and sterilization, aseptic blower-filler-capper block, CIP line, cap feeding and sterilization system, bottle and label and inspection systems, shrink packer, handle applicator and conveyors. Palletizer is excluded. The product first goes through gas removal treatment and is then pasteurized in a tubular heat exchanger. The product is cooled down and pumped into an aseptic buffer tank prior to filling. In the over pressurized filling and c ...

Category: 706 beverage machines
Latest update: 18.03.2020 No.: 145468734
approved
dealer
New in: 1989
used
Seller: country-de Kahl & Schlichterle

with 120 filling valves, 18 aluminium screw caper and 18 crown corker Products: Mineral water and carbonated soft drinks with Siemens S 5 electric Running direction: left - right with safety housing, around the machine immediately available if needed: the machine is blocked with a KRONES Solomatic labeling machine for paper labels with cold glue

Category: 401 filling machines
Latest update: 02.06.2020 No.: 146649409
New in: 2008
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Aseptic Filling Line for juices and dairy products ELOPAK 8100 cartons / hour There are two identical lines built and commissioned by ELOPAK in year 2008. They are designed for aseptic filling of low PH (4.5) products, like fruit juices with or without pulp, nectars and other non-carbonated fruit containing beverages in to 500 ml, 750ml and 1000 ml barrier board containers at ambient temperature and further package containers on carton box for distribution. For these products the shelf life is the same as Tetra Pak technology. Main characteristics of one line Manufacturer ELOPAK Aseptic filler type S-PS80HA Cap Applicator 3 units of Elopak PURE-CAP PLA-S80 Cap feeding unit Elopak CSFS Date coders 3 x Videojet EXCELL 2000 Carton Box Erector Elopak WA-Flex-30 Line Manufacturing Year 2008 Total operatin ...

Category: 401 filling machines / Filling installations and packing plants
Latest update: 27.02.2020 No.: 144892485
approved
dealer
New in: 2007
used
Seller: country-de ecomac Gebrauchtmaschinen GmbH

Format: 0.3l glass Product: carbonated soft drinks

Category: 401 filling machines
Latest update: 04.06.2020 No.: 146671944
New in: 2003
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

PET Bottle Filler Procomac HAL Monoblock 12.000 bph PET bottle rinsing, filling and capping monoblock made by Procomac in 2003. In the rinser first treatment is with water and ozone, the second treatment is with sterile water. The filler has gravity filling with 36 filling valves and it is suitable for non-carbonated drinks only. This machine has two AROL capping stations both with 6 positions, one for 38 mm sport caps and the other for standard 38 mm caps. Complete monoblock is equipment with automated CIP system. Manufacturer: Procomac RN S.r.l., Italy Model: HAL SF PET 36.36.6 Serial no: BLK01297 Year: 2003 Capacity: 12.000 bph (0.33 and 0.5 ltr), 6.600 bph (1.5 ltr) Rinser: Gripstar 2R 36.108.125.6 Filling heads: SFP, 36 pcs Capping: AROL Euro PK, 6 + 6 pcs Pitch: 125.6 mm Electricity: 8.87 kW, 400 V, 50 Hz Condition: Good

Category: 401 filling machines
Latest update: 05.06.2020 No.: 146688329
New in: 2007
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Filling Line Krones 36000 bph for CSD in returnable glass bottles – 2007 This line is in good condition and with very low operating hours. I was commissioned in 2008 but used only less than 5000 hours for filling coca cola. It has no crate depalletizer nor crate palletizer, also labeling machine is not a part of the line, otherwise line is complete. Ready for immediate relocation. Main characteristics Manufacturer KRONES, Gassner Manufacturing year 2007 Filling Product Carbonated Soft Drinks Capacity 36.000 bph at 0,3l returnable glass Operating hours Less than 5000 hours Used bottles 0,3 l with diameter 61 mm and height 220 mm Cap Crown Cork Filling temperature 13°C Max CO2 content 7,5g/l Secondary packaging Plastic crate 6x4 Control PLC Siemens S7 300 Voltage 415V - 50 Hz

Category: 706 beverage machines / Filling installations
Latest update: 21.11.2019 No.: 143590990
New in: 2018
used
Seller: country-de GTH Holler

Complete glass bottle filling plant for carbonated drinks (beer) 2,000 fl./h 0.33 + 0.50l bottles 2018 factory overhauled ALSO WITH THE BREWERY PROJECT: BRAU-19-500L- BRNOSEGR FOR SALE Further document and price on request

Category: 401 filling machines
Latest update: 27.02.2020 No.: 144890192
approved
dealer
New in: 1998
used
Seller: country-de ecomac Gebrauchtmaschinen GmbH

Format: 0.5l and 1.5l l PET Product: still water, carbonated soft drinks

Category: 706 beverage machines / PET systems
Latest update: 15.01.2020 No.: 74193248
approved
dealer
New in: 2003
used
Seller: country-de Kahl & Schlichterle

High capacity filling line for carbonated soft drinks capacity: approx. 35,000 bph capping: PCO 28 mm plastic screw caps consisting of: 1. Compressor Atlas Copco ZR250 year of manufacturing: 2003 10 bar 2. Booster compressor Atlas Copco year of manufacturing: 2003 40 bar inclusive pressure tanks 3. blowing machine Krones Contiform S24 year of manufacturing: 2002 with 24 cavaties incl. complete preform feeding system Tanner incl. preform silo year of manufacturing: 2004 4. Filler Krones Mecafill 104/26 year of manufacturing: 2003 with 104 filling valves and 26 head plastic screw capper incl. cap feeding system Gassner (year of manufacturing: 2004) incl. complete valve knot 5. air conveyor Krones Air co year of manufacturing:2003 approx. 100 mtr.

Category: 706 beverage machines / Filling installations
Latest update: 17.02.2020 No.: 25630819
approved
dealer
New in: used
Seller: country-de Ohrter Getränkemaschinen Handel GmbH & Co. KG

Bottle filler for beer and carbonated drinks Performance: - 40.000 b/h working direction: - left-right Set up for: - 0.33 l Steinie - 0.33 l lunge corner - 0,5 l NRW

Category: 706 beverage machines / Filling installations
Latest update: 25.02.2020 No.: 145237862
approved
dealer
New in: used
Seller: country-ch Mazuba GmbH
Location: 4144 Arlesheim

Can filler with non-woven Model: Hansacan Type: D 40-123 Manufacturer: O+H Hansacan (KHS) Built: 1996 Performance: 24000 c/h at 0.33l 20000 c/h at 0.5l Closure: 202 Can volume: 330/375/500ml Product: Beer/carbonated Drinks Capper Model: F-506 Manufacturer: Ferrum Built: 1996 Accessories • Control with Siemens S7 • Machine is height-adjustable • The machines are in a very good condition and were serviced annually.

Category: 706 beverage machines / PET systems
Latest update: 02.06.2020 No.: 131484264
approved
dealer
New in: used
Seller: country-ch Mazuba GmbH
Location: 4144 Arlesheim, Postfach 462

Complete Filling Line for drinks, plastic bottles, suitable for still or carbonated drinks, fully automated from start to finish, rated at up to 8000 bottles per hour Line includes : AVE Bottle Hopper/Elevator & Automatic PACE PACKAGING (USA) Model M600 Unscrambler KRONES 24-Head Rinser SIMONAZZI 40-Head filler DICO 10-Head Capper with cap hopper and blower and no seal cap sensor & alarm, Rinsing/Washing Tunnel, Air Control Industries Air Blower/Dryer, Inline SOVEREIGN Labeller, Type SOV Round Bottle with Omron PLC & bottle spacing belt, Automatic Trayless NOVOPAC Shrink Wrapper suitable for several pack formats and out feed conveyor. The line will also come with 1 x 3000L 316 stainless steel mixing tank 1 x 5,000L 316 stainless steel holding tank, also with inline carbonator. The line can be setup for 330ml, 500ml, 750ml, 1Litre, 1.5Litre & 2Litre. The capper can also  ...

Category: 706 beverage machines / Filling installations
Latest update: 03.07.2020 No.: 146729836
approved
dealer
New in: 1998
used
Seller: country-de Bavaria Getränkemaschinen GmbH

for carbonated softdrinks capacity: approx 40.000 x 0,5l bt. / h working direction: left - right pitch: 126 mm - neckhandling - 108 filling valves - 18-head screw capper with plastic screw caps - product and gas touched parts in stainless steel Presently equipped for handling of 0,5l REF PET bottles.

Category: 706 beverage machines / Filling installations
Latest update: 03.07.2020 No.: 146729839
approved
dealer
New in: 1998
used
Seller: country-de Bavaria Getränkemaschinen GmbH

for filling of carbonated soft drinks and mineral water capacity: approx 36.000 x 1,5l bt. / h working direction: right - left pitch: 113 mm - 160-head filler - 20-head screw capper - with Siemens S5 PLC - neckhandling - product touching parts in stainless steel Presently equipped for handling of 1,5l PET bottles.

Category: 401 filling machines / Bevarage filling plants
Latest update: 30.01.2020 No.: 136844913
approved
dealer
New in: 2005
used
Seller: country-es MachinePoint

Complete filling lines for carbonated drinks Output: 12 000 U/h Valves-Filling Heads: 72 The line consists of the following machines: Blow Moulder Krones Contiform S8, from 2005 (28 pco 1881 short neck. Moulds for 0,25ml, 1l, 1,5l, 2l, 2,5l. 8 cavity) Filler Corfill, Model: Uniblock 54-72-9, from 2005 Mixer Corfill/CME, from 2005 Labeller, Krones Contiroll, from 2005 Shrink wrapper, Dimac Star F30, from 2005 Palletizer, brand Inka, model: Inpal 100S, from 2014 Pallet stretch wrapper

Category: 706 beverage machines / Can filling plants
Latest update: 18.03.2019 No.: 124746353
approved
dealer
New in: 2003
used
Seller: country-de Ebert Technologie GmbH

Dosenfüller Filling Systems mit Verschließer Sima, ISO-C 30-4, Baujahr: 2003, 30 Ventile, 4 Kopf Verschließer, Dose 202, 330 ml + 500 ml Sleek + Standard, stille und CO2-haltige Getränke, Siemens S 7 Can filler filling system with can seamer SIMA, ISO-C 30-4, mad a 2003, 30 valves, 4 head seamer, can lid 202, 330 ml + 500 ml sleek + standard can, still and carbonated drinks, Siemens S 7

Category: 706 beverage machines / Can filling plants
Latest update: 09.04.2020 No.: 145781881
approved
dealer
New in: 1990
used
Seller: country-de Bavaria Getränkemaschinen GmbH

Capacity: approx 80.000 x 0,33l cans / h (at 12-15°C in the can) Product: carbonated soft drinks consisting of the following aggregates: 1 Empty Can Depalletizer make: KHS type: Markant S2-1 ASH-TP year: 1990 Empty Can Conveyor between empty can depalletizer and rinser make: Angelus year: 1990 1 Jet Stream (before and after the rinser) make: KHS year: 1990 1 Premixing Unit make: KHS type: Paramix 36000 CM 40 year: 1991 with new Siemens S7 PLC incl. 1 Brix- and CO2 Analyzer make: Maselli type: IBO5 / UCO4 1 Rinser (for chlorinated water) make: KHS year: 1991 1 Can Filler make: KHS type: 4 SVF 120 / D year: 1991 incl. platform 1 Can Seamer make: Angelus type: 121 L (202) year: 1991 1 Cap Supply (fully automatic) make: CSW type: End Feed System 54-MF-10 year: 1999 Full Can Conveyors from filler to traypacker Trayp ...

Category: 706 beverage machines
Latest update: 15.07.2020 No.: 146364302
approved
dealer
New in: used
Seller: country-de hbtech maschinen

Mixer KHS Intermix MC 45 This mixer-carbonator was made by KHS in 1995 and it has a capacity of 450 hl/h. The mixer is suitable for carbonated and still mineral water and two-component beverage. Mixer has a carbo blender installed. It is professionally dismantled and ready for immediate delivery. Serie Nummer: 10940061 Zur Herstellung CO2-haltiger und stiller Produkte Manufacturer: KHS / Ortmann + Herbst Type: Intermix MC 45 Year: 1995 Capacity: 450 hl/h, 45 000 ltr/h Mixing ratio: 1:4 to 1:7 of syrup and water Control PLC: Siemens S5 / 135 2 component product Mineral water Capacıty: 45.000 l/h Mıxıng ratıon of Syrup / water : 1:4 to 1:7 Control: SIEMENS S5 / 135 Control surface: LAUER    PCS  9000 Dosage system: Water - IDM ; Syrup - IDM

Category: 401 filling machines
Latest update: 04.06.2020 No.: 146674099
New in: 2005
used
Seller: country-fi JADE Trading OY
Location: 00980 Helsinki

Glass Bottle Filling Machine KHS Innofill DMG / SVF 120/16, 50 000 bph KHS Innofill DMG is a mechanically controlled glass bottle filler has 120 filling head filler and a cap closing station with 16 heads. This unit has been filling beer in 0.33 and 0.5 liter glass bottles with crown corks, capacity 50 000 bph. Filling level is determined by return gas tubes. This filler machine is designed to bottle beer, soft drinks, as well as non-carbonated beverages in glass bottles. All processing sequences of the Innofill DMG are mechanically controlled for easy handling and operating. The machine is in good condition, still installed and powered but the production was stopped in year 2013 Technical information: Machine type: KHS Innofill DMG / SVF 120/16 Serial number: 47527 Manufacturing year: 2005 Capacity: 50 000 bph in 0.5 liter bottles Bottle volumes: 0.1 L - 1.5 L Filling t ...

Category: 401 filling machines
Latest update: 27.02.2020 No.: 144890049
approved
dealer
New in: 2001
used
Seller: country-de ecomac Gebrauchtmaschinen GmbH
Location: 93073 Neutraubling, Berliner Str. 31

Format: 0,5 l PET Product: still and carbonated water, Soft Drinks

Category: 706 beverage machines
Latest update: 08.01.2019 No.: 28888015
approved
dealer
New in: 2003
used
Seller: country-de Ebert Technologie GmbH

PET bottling line for CO2 - containing drinks. Power 5000 x 1500 ml. Alkam blow-moulding machine, Simonazzi Bluestar 2000 Triblock 32-32-8 for standard 28 mm closure and 28 mm sports CAP, with 141 mm pitch, Krones Etikettierer Contiroll,. Shrink packer at the Traypacker SMI, Alta Twinpack Handgriffapplikator, air transport, bottle transport tray/shrink Pack transport PET filling line for carbonated soft Drinks, capacity 5000 bph x 1. 500ml. Alkam blow moulder, Simonazzi Bluestar 2000 Tribloc standard caps and 28 mm sports caps, with filler pitch 141 mm, Krones labeller Contiroll, shrink packer at the Traypacker SMI, Alta Twinpack handle 32-32-8 rinser-filler-capper for 28 mm applicator, air conveyor, bottle conveyor, conveyor tray/shrink pack

Category: 706 beverage machines
Latest update: 08.01.2019 No.: 28888049
approved
dealer
New in: 2003
used
Seller: country-de Ebert Technologie GmbH

Filler for PET for CO2-containing drinks. Type Simonazzi Bluestar 2000 rinser 32, 32 filler, Capper 8 power: 5,000 x 1,500 ml 28 mm standard closure and 28 mm sports cap. Division of filler 141 mm. direction right-left. Siemens S 7. Filler for PET for carbonated soft drinks. Type Simonazzi Bluestar 2000 rinser 32, filler 32, screw capper 8 capacity: 5,000 x 1,500 ml 28 mm standard cap and 28 mm sports cap. Pitch filler 141 mm. running direction right - left / anti clockWise. Siemens S 7.

Category: 706 beverage machines / Bottle filling plants
Latest update: 08.06.2020 No.: 146729978
approved
dealer
New in: used
Seller: country-de Eurolux GmbH & Co.KG
Location: 97753 Karlstadt-Karlburg (bei Würzburg)
Price: 14.950 €

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)