carbide used for sale

Max. cutting cap. 90 deg, round: 558 mm / 22” Max. cutting cap. 90 deg, rectangular: W 609 mm x H 558 mm / 24”W x 22” H Blade dimensions: 6604 x 50 x 1.6 mm / 260” x 2” x .063” Blade guides: Roller bearing & carbide Guide arm (manual / powered): Manual Blade speeds: 60-300 FPM Number of speeds: Infinite Blade motor: 10 HP Blade drive type: Belt & pulley to gearbox Blade tension type: Hydraulic Blade wheel size: 28” / 711 mm Hydraulic motor: 3 HP Coolant motor: 1/4 HP Coolant type: Flood Dimensions: 3403 x 2184 x 2032 mm / 134” x 86” x 80�

for 120 - 150 HP tractors, 36 cm tungsten carbide hammers, for wood up to 20 cm in diameter, rotor shaft with vibrating tools, freely movable through 360 °, hydraulically adjustable rear hood, Working width: 223, Year of construction: 2018

EasyShrink 10 covers a diameter range of 1/8 to 1.25 inches for carbide and heavy metals and 1/4 to 1.25 inches steel and HSS tools. The units built-in processor automatically adapts the correct power level to the selected media diameter to avoid overheating and minimize power consumption. With the EasyShrink 10 unit, the tool is safe to handle immediately after the full tightening cycle, regardless of the built-in integrated cooling method A stop rod height setting system built into the EasyShrink 10 unit allows for easy setting of the cutting tool position without the need to use stop screws which can risk tool deformation. The compact and rigid EasyShrink 10 unit is designed to be used close to machines on the shop floor by operators with minimal training to provide safe and efficient locking of cutting tool holders to help improve productivity, quality and efficiency in t ...

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...

Used GEA Niro Soavi Model Ariete NS3015 H stainless steel homogenizer. Capacity approximately 200 liters/hour (528 US gallons per hour) at maximum pressure 1500 bar (21755 PSI), 1-stage, 3 pistons. Pump valves material: Tungsten Carbide (WC), plungers material: solid ceramic. Homogenizer is driven by an electric engine 15 kW/400V/50 HZ. Overall dimensions 1120 mm (length) x 1350 mm (width) x 1500 mm (height). Weight : 1300 kg. Manufactured 2014.

Key data: 320 mm, 4700 mm, 500 mm

Metal band saw machine in good condition YOC 2009 Ready for immediate use at call The HBA 500 S i has a stable 2-column construction and is characterized by the best cutting performance and simple and clear control. The highest level of precision and safety is guaranteed. Thanks to the extensive range of accessories, these models can be upgraded to a machine for highly demanding automatic saws. Working range, cutting quality and performance make the HBA 500 S a top model. Standard accessories: Control DP 100 with 7" touch screen, carbide guides, motor-driven chip brush, hydraulic cutting pressure adjustment, reinforced saw frame, 34 mm band saw technology, coolant system, integrated roller conveyor 1200 mm Saw blade dimensions 4400 x 34 x 1.1 mm Weight: 2400 kg Dimensions LxWxH2200x2400x2100 mm Working height 650 mm Cutting speed15-105m/min Infinitely variable f ...

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x 2015 mm, colour: blue/grey RAL 7047 / blue RAL 250-50-20 ...

Description: Consisting of various carbide drills and milling cutters, some internally cooled, as well as indexable insert milling cutters Please note: this is only the contents of the drawer, not the entire drawer cabinet that may be seen Approx. Onsite Dimension. (l x w x h): 730 x 700 x 100 mm, weight approx.: 200 kg

Description: Contents consisting of various clamping jaws, carbide cutters, a magnetic clamping plate from the manufacturer SAV (dimensions: 400 x 200 mm) Approx. Onsite Dimension. (l x w x h): 800 x 650 x 1,400 mm, weight approx.: 70 kg

Suitable for end machining of blanks as well as for peeling grinding of steps, for producing tips, chamfers, radii and their combination at the ends of cylindrical tools made of solid carbide, HSS and ceramic. Up to four different grinding wheels in one clamping. Accessories: NUMROTOplus single-user system software, Software NUMROTOplus touch cycles workpiece (RS/SF), Software NUMROTOplus SF cycles, Software NUMROTOplus cylindrical grinding SF 40 incl. software & hardware (hollow shaft motor), Chuck clamping cylinder pneumatic, Balancing system SA (semi-automatic) EB 500, Pneumatic workpiece clamping, Oil collecting pan, Electrostatic mist extractor., Traverse X-axis: 450 mm, X axis travel: 450 mm, Z-axis travel: 250 mm, X-axis resolution: 0.001 mm, X axis resolution: 0.001 mm, Z-axis resolution: 0.001 mm, Resolution Z axis: 0.001 mm, Resolution C-Ache: 0.001°, X-axis rapid traverse: 15 ...

Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one, set-up. The complete machining hook angle, clearance angle, top and blade body in one single clamping Accessories:, Total enclosure,, Coolant system,, Automatic fire extinguishing device,, Alphanumeric plug-in keyboard for data management,, Machine light,, Extractor,, Measuring probe,, Saw diameter: 80-840mm, Bore diameter: from 10 mm, bore diameter: from 10 mm, sheet thickness:

Suitable for resharpening of CV-, bimetal and carbide tipped bandsaw blades from 8 - 80 mm width., Accessories:, Coolant System,, Hood,, Free programmable tooth forms,, 1 bandsaw mount,, 1 grinding wheel mount., Sawblade band width: 8-80mm, Tooth pitch: 3-34mm, Sawblade thickness: approx. 0.5 - 3 mm, Sawblade length: min. 1400 mm or min. 2800 mm - max. 7000 mm, rake angle: -10 to +25 degrees freely selectable, grinding speed: approx. 100 – 600 mm / min, Radius disk: (14F1) CBN or DIA, Grinding wheel diameter: 200mm, max. grinding wheel width: 3 mm, Grinding wheel bore: 32 mm, grinding motor: 0.5kW, Connected load approx.: approx. 1.5 kW (400 V / 50 Hz), Weight approx.: 370 kg, Dimensions W x D x H approx.: 2000 x 1117 x 2210 mm, colour: light gray RAL 7045/dark gray RAL 7047

Suitable for cleaning coolant oil for grinding carbide. Accesories: 2 filter towers, automatic backwash., container content: 800 l, flow capacity max: 100 - 120 l/min, Filter fineness:: greater than 0.003mm, Connected load approx.: 4.0kW (400V/50Hz), Dimensions W x D x H: 1650 x 1000 x 2000 mm, Weight approx.: 1000 kg, colour: light grey

Description: Contents: , Machine vice, jaw width 125 mm , Tool holders BT 40 , Twist drill, solid carbide, clamping material, indexable inserts weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 800 x 559 x 1,000 mm

Description: Cabinet with 8 drawers, ,  , Contents , Twist drill bits, partly solid carbide, , Indexable inserts, , Taps, , Machine reamers, end mills Approx. Onsite Dimension. (l x w x h): 600 x 600 x 900 mm, weight approx.: 80 kg

Description: Contents 2-flute milling cutters, 4-flute milling cutters, solid carbide milling cutters, ,roughing cutters, boring tools Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,200 mm, weight approx.: 200 kg

through-put width: 1000 mm working heigth: 800 mm air consumption: 250 - 1000 l/min Filter capacity: 8 m² air pressure: max 10 bar total power requirement: 0,55 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 2100 x 1200 x 1850 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the blasting m ...

Description: Cabinet with sliding doors, contents solid carbide milling cutters, ,twist drills, assembly material, approx. 60 SK 40 tool holders, mostly equipped with tools, ,plus placeholder shelves weight approx.: 550 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 800 x 1,400 mm

Price example : FS310PS - New , carbide planer shaft dia. 75mm, thickness planer height: 5 - 240mm: 1900,- net

- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition

Description: Mostly solid carbide drills , Diameter 1.65 to 12 mm Partially prepared for inner coolant supply Attention: loose twist drills cannot be packed separately Approx. Onsite Dimension. (l x w x h): 400 x 200 x 150 mm, weight approx.: 10 kg

Description: Contents consisting of dies, milling cutters, carbide milling cutters, indexable inserts (some in original packaging), collets, open-end wrench Approx. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 250 kg

Description: Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and low-noise operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 U / min Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m weight approx.: 12 kg, Approx. Onsite Dimension. (l x w x h): 700 x 400 x 300 mm

Description: Miter cuts up to 60 ° left -saw speed 35/70 m / min. -Spannstock With quick set device -Sägebandführung Carbide -Bandspannungskontrolle -Elektr. Refrigeratory automation Auto-Cut system = 3-stage system -Auto Saw frame lowering using the hydraulic cylinder -Infinitely adjustable feed -With limit -Schnellgang Lowering of the saw frame from the rest position to the workpiece, then switch over to normal saw feed -Manual mode Cutting diameter 220 mm Saw band 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m / min Saw-band 2455 x 27 x 0.9 mm Cutting capacity at 60 ° 90 mm Cutting capacity at 60 ° square 90 mm Cutting capacity at 60 ° flat 90 x 100 mm Cutting capacity at 45 ° round 150 Cutting capacity at 45 ° square 150 Cutting capacity at 45 ° square 150 x 210 Cutting Capacity at 90 ° 220 mm round Cutting capacity at 90 ° square 210 mm Cutting c ...

Description: 0-600mm 0.01, Digital scrapers with micrometric screw, Chromed stainless steel, On / off - zero - mm / inch - ABS - hold - preset +/-, Tip with carbide insert The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 855 x 390 x 295 mm, weight approx.: 11 kg

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one setup. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be ground automatically and in one pass. Accessories: Handling system for saw blades ND 230 including data input station and 3 loading trolleys Loader ND 230 Full cladding Saw positioning device, Automatic central lubrication, Wet grinding device, Extraction, Halogen lamp, 1 saw blade mounting bolt including magnet holder Oil collecting tray, Circular saw blade diameter without robot: 80 -840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: with robot from 10 -180 mm, Circular saw bore diameter without robot: from 10 mm, Circular saw bore diameter with robot: with robot from 10 -180 mm , Sheet thickness without robot: up to 14 mm, Sheet thickness without robots: up to ...

Suitable for automatic, double-sided tooth flank grinding on carbide-tipped circular saw blades. Accessories: Wet grinding device, Automatic central lubrication Hydraulic saw blade clamp, Circular saw blade outer diameter: 80 to 840 mm, Tooth pitch: up to 100 mm, optionally up to 180 mm, sheet thickness: up to 8 mm, tangential relief angle: up to 8°, Tangential clearance angle: up to 8°, radial relief angle: -10° to 6°, Radial clearance angle: -10° to 6°, grinding path: up to 16 mm, Grinding path: up to 16 mm, Grinding wheel diameter: 80 to 100mm, Grinding wheel bore diameter: 32 mm, peripheral speed: approx. 18-27 m/s, Circumferential speed: approx. 18-27 m/s, Connected load approx.: 3.6 kW (400 V / 50 Hz), Dimensions W x D x H approx.: 1980 x 1900 x 2000 mm, Weight approx: 1670 kg, colour: turquoise

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternating, trapezoidal, etc.) can be machined automatically and in one run be sanded. Accessories:, Total enclosure, Sawblade positioning device,, Automatic central lubrication,, Coolant system,, Extractor,, Halogen lamp,, 1 sawblade mounting bolt including magnetic flange., Circular saw blade diameter without robot: 100-840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: 10 - 220 mm, Sheet thickness without robots: up to 14 mm, Sheet thickness with robot: up to 5 mm, Tooth pitch: 6 - 120mm, rake angle: -30° to +40°, clearance angle: 5° - 45°, Bevel cut on the back of the tooth: up to 45 °, Bevel cut on the negative tooth face: up to 45 °, Working speed for front and back grinding: up to 12 teeth/ ...

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Description: Material: steel, sintered carbide Hole saw diameters: 30, 40, 65, 80, 100 mm Hole saw height: 75 mm Mounting: SDS-Plus, SDS-Max Approx. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg

Description: Material: tool steel, sintered carbide, HSS steel Number of hole saws in the set: 6 Drilling diameters: 16, 18, 20, 22, 25, 35 mm Maximum drilling depth: 25 mm Approx. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg

Description: Material: steel, sintered carbide Hole saw diameters: 30, 40, 65, 80, 100 mm Hole saw height: 75 mm Mounting: SDS-Plus, SDS-Max Approx. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg

Description: Material: tool steel, sintered carbide, HSS steel Number of hole saws in the set: 6 Drilling diameters: 16, 18, 20, 22, 25, 35 mm Maximum drilling depth: 25 mm Approx. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Description: Material: tool steel, sintered carbide, HSS steel Number of hole saws in the set: 6 Drilling diameters: 16, 18, 20, 22, 25, 35 mm Maximum drilling depth: 25 mm Approx. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg

Description: Material: steel, sintered carbide Hole saw diameters: 30, 40, 65, 80, 100 mm Hole saw height: 75 mm Mounting: SDS-Plus, SDS-Max Approx. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg

Description: 1700W electric motor Cutting disc with a diameter of 210 mm Durable die-cast aluminum frame Swivel base adjustable in the range -45°/0°/45° Equipped with precise cutting lines for laser marking LEDs for excellent lighting Advancement that allows a cut of 340 mm with the base in the 0° position, setting the base in the 45° position allows a cut of 240 mm Maximum cutting depth: Disc inclined at 90°: 65 mm Disc inclined at 45°: 38 mm Equipped with cutting depth limiter. Extendable worktop The miter saw set includes a miter saw and two cutting discs with a diameter of 210 mm, equipped with 24 and 60 carbide cutting teeth. Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 15 kg

Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in the current condition as inspected -Condition see pictures -Cutter head shell milling cutter: Ø 172 mm -Hole: Ø 40 mm -Bolt circle: Ø 155 mm -Total dimensions: Ø 172 x 75 mm -Weight: 7.2 kg

Description: Serial Number: 86100 Grinding wheel: CBN - diamond 1.3 to 6mm CBN bore: 32mm Operating speed: 60m/s Circular saw blade diameter: 80 - 560mm max. circular saw blade thickness: 6mm Tooth shapes: Curved tooth (B, C according to DIN 1840), pointed tooth / angled tooth (A according to DIN 1840) Connected load: 7.0kW Grinding motor power: 2.2kW Accessories: 3x grinding wheel holder, blade holder F-1004, F-1008, F-1009 Operating instructions, circuit diagram, spare parts list For processing HSS and solid carbide circular saws. These can be resharpened, re-toothed and chamfered. The specified tooth form curve is achieved via two controlled axes. During the grinding process, the CBN grinding wheel traces the complete tooth shape and removes the desired amount of material, while the control system calculates the number of teeth from the diameter and the number of teeth. O ...

Description: consisting of turning steels, indexable inserts, hand tools, allen keys, screws, various clamping jaws, various carbide cutters, milling cutters, a larger batch of collets, manufacturer FAHRION, one SCHUNK machining element Attention: without Multifix steel holders on the cabinet Approx. Onsite Dimension. (l x w x h): 800 x 750 x 1,200 mm, weight approx.: 200 kg

Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5, ...

CONTROLS   PLC SIEMENS S5 SLIDE   total force (nominal): 160 to   stroke: 60 mm COUNTER RAM   nominal force: 80 to V-RING   nominal force: 80 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 600 mm   shut height max.: 335 mm   ram adjustment: 125 mm   distance between columns (H-frame): 630 mm   passline opening (free passage in side columns): 270 mm CROP SHEAR   cutting force: 150 kN DIMENSIONS / WEIGHTS   total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machi ...