We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,591 used machines on RESALE, but how to find them? Machine Search
new
cutting diameter: 540 mm saw band length: 6000 mm cutting width: 750 mm table height: 695 mm cutting speed: 20 - 100 m/min : 540 mm : 540 x 540 mm Capacity 90° rectangular: 750 x 540 mm : 540 mm : 540 mm : 600 x 540 mm : 510 mm : 450 mm Capacity 45° rectangular: 450 x 540 mm capacity 60 degrees: round: 270 mm capacity 60 degrees: square: 250 mm capacity 60 degrees: flat: 250 x 540 mm total power requirement: 4 kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 3,0 x 1,3 x 2,13 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cu ...
new
cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...
new
saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 220 mm total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), ...
used
grinding length: 500 mm grinding width: 200 mm workpiece height: 250 mm total power requirement: 5,5 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _________________________________________________ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 ...
new
Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](https://en.wikipedia.org/wiki/Cerium(IV)_ox ...
used
5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro
used
Spiral drill bit grinding machine make GÜHRING type SS 13for the grinding of spiral drills made of high-speed steel or solid carbideand carbide tipped toolsGrinding range: 2 - 50 mmSand the tip: 2 - 50 mmThroat cross cutting: 5 - 50 mmSanding standard bevel at tip: 60 - 180 °Drive power / total power requirement: 3 hp / 3.3 hpExternal dimensions L x W x H: 1100 x 1600 x 1640 mmWeight approx: 1000 kgWith- various accessories- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spiral drill bit grinding machine make GÜHRING type SS 13Machine -No: 1003 Year 1967for the grinding of spiral drills made of high-speed steel or solid carbideand carbide tipped toolsGrinding range: 2 - 50 mmSand the tip: 2 - 50 mmThroat cross cutting: 5 - 50 mmSanding standard bevel at tip: 60 - 180 °Calibration device Vertical travel range: approx. 100 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0 Delivery area horizontal: approx. 130 mmDrive power / total power requirement: 3 hp / 3.3 hpExternal dimensions L x W x H: 1100 x 1600 x 1640 mmWeight approx .: 1000 kgWith- various accessories- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...
used
workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...
new
Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...
used
Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25
used
Alu Folding knife head 125x50x30 Speed: n= 6000 - 10300 rpm Carbide knives G&-4979-M3A6J
used
Digital height measuring and marking device with double column and handwheel adjustment Resolution 0.01 mm / 0.0005 inch 0 - 600mm Carbide tear tip The device comes from my private property, was used for private purposes. It is in a very good little-used condition. Original price today 605,00Euro net
new
Lindner Mircromat 2500 HP, 160 kW, with direct drive. Control cabinet with frequency converter. Knife size 43 x 43 x 19.5 mm (carbide). Number of blades 131. Max rotor speed 265 rpm With large filling shaft (5.6 cbm) and filling hood. Internal pusher 7.5 kW. Perforated sieve 30 mm. New machine
new
cutting diameter: 250 mm saw band length: 2950 mm table height: -- mm : 280 mm : 2950 x 27 x 0,9 mm : 280 x 200 mm : 230 mm : 190 mm : 180 x 180 mm : 180 mm : 120 mm : 110 x 110 mm : 110 mm : 36 / 72 m/min : 1,5 / 1,8 kW powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and m ...
new
through-put width: 580 mm working heigth: 580 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 115 kg dimensions of the machine ca.: 1225 x 935 x 1640 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the b ...
new
cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made ...
new
cutting diameter: 300 mm saw band length: 3320 mm table height: -- mm : 330 mm : 40 / 80 m/min : 3440 x 27 x 0,9 mm : 280 mm : 260 mm : 380 x 260 mm : li 260 mm : li 250 mm : li 300 x 200 mm : re 200 mm : re 180 mm : re 230 x 160 mm : 180 mm : 170 mm : 200 x 170 mm : 870 mm : 1,5/1,8 kW : 0,7 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large ...
new
cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm : 2950 x 27 x 0,9 mm : 285 mm : 36 / 72 m/min : 250 mm : 220 mm : 280 x 220 mm : 120 mm : 140 x 80 mm : 80 mm : 200 mm : links 220 x 200 / rechts mm : links 200 / rechts 170 mm : 1,86 kW : 0,4 t : 1,8 x 1,3 x 1,8 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with ...
new
through-put width: 870 mm working heigth: 850 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 1320 x 1200 x 1760 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the ...
new
cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: L 260 mm capacity 45 degrees: square: L 250 mm capacity 90 degrees: flat: L 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm capacity 45 degrees: round: R 200 mm capacity 45 degrees: square: R 180 mm capacity 45 degrees: flat: R 200 x 160 mm saw band length: 3650 x 27 x 0,9 mm cutting speed: 40 / 80 m/min total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,640 t dimensions of the machine ca.: 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New ve ...
new
cutting diameter: 180 mm saw band length: 2130 mm cutting width: 200 mm dimensions of saw-band: 2130 x 20 x 0,9 mm : 200 mm band speed: 40/80 m/min capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: flat: 125 x 110 mm capacity 45 degrees: square: 110 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,4 x 0,9 x 1,6 m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via co ...
new
cutting diameter: 225 mm saw band length: 2450 mm table height: mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x 0,9 mm area output: 240 mm band speed: 46/92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 155 x 115 mm capacity 45 degrees: square: 140 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 90 x 90 mm capacity 60 degrees: square: 90 mm total power requirement: 1,4 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC ...
new
cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm : 40 / 80 m/min : 3650 x 27 x 0,9 mm : 300 mm : 260 mm : 330 x 260 mm : 260 mm : 250 mm : 270 x 200 mm : 180 mm : 170 mm : 170 x 170 mm : 870 mm : 2,35 kW : 0,7 t : 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically ...
new
cutting diameter: 225 mm saw band length: 2450 mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x ,09 mm band speed: 46 / 92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: li. 160 / re. 145 mm capacity 45 degrees: flat: li. 140 / re.125 mm capacity 45 degrees: square: li. 155 x 115 / re. 150 x mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 90 mm motor: 0,7 / 0,81 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 1,2 x 1,1 x 1,5 m Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutti ...
new
: 820 mm saw band length: 8200 mm cutting width: 850 mm : 850 x 820 mm : 820 x 820 mm : 480 mm : 480 x 480 mm Capacity 45° rectangular: 480 x 820 mm table height: 585 mm cutting speed: 20 - 100 m/min dimensions of saw-band: 8200 x 54 x 1,6 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 9,4 kW weight of the machine ca.: 3,43 t dimensions of the machine ca.: 3,9 x 1,2 x 2,35 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechanic blade tension ?swar ...
new
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...
new
Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004
new
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up ...
used
3-ring lapping machine diameter mm 3 rings new timer This machine can be inspected under power in our warehouse Test run possible - video available Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Je ...
used
PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...
used
Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.
used
WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...
used
WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...
used
KEMET 36, diamond lapping machine, diameter mm 900, 3 rings, Diamond slurry dispenser (water based) + standard oil based slurry dispenser, Spare lapping plate available (option), This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [alumi ...
new
Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...
new
Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...
new
sliding carriage length: 3200 mm; cutting width with rip fence: 1270 mm; Max. cross cut width left from saw blade: 3200 mm; Max. cutting height 90°: 140 mm; Max. cutting height 45°: 99 mm; scoring unit: yes; height adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: motorized; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: scala; saw blade diameter: 400 mm; saw blade speed: 3000 - 4000 - 5000 U/min; motor power: 7,0 kW; motor brake: yes / automatically; suction connection: 80 mm / 120 mm; machine length: 3600 mm; machine width: 1900 mm; weight: 1600 kg; With swiveling 400 mm saw blade and preheating device. M version with motorized height and angle adjustment of the saw blade. - Sturdy cast steel construction guarantees precision, smooth running and durability - Smooth-runn ...
used
KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization) ...
used
Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...
new
cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 mm capacity 45 degrees: square: li. 250 mm capacity 45 degrees: flat: li. 270 x 200 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: 330 x 260 mm motor: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size ...
used
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg
new
cutting diameter: 330 mm saw band length: 4640 mm cutting width: 510 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 45 degrees: flat: li. 350 x 320 / re. 380 x mm capacity 45 degrees: round: li. 320 / re. 320 mm capacity 45 degrees: square: li. 320 / re. 320 mm capacity 60 degrees: flat: li. 230 x 310 / re. 250 x mm capacity 60 degrees: round: li. 200 / re. 200 mm capacity 60 degrees: square: li. 200 / re. 200 mm weight of the machine ca.: 1,19 t total power requirement: 4,0 kW Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice clo ...
used
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg
used
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg
used
Induction Tilting Italimpianti FIM5 (FIM7 T CPU) and CPL / 5 in a very good working condition. Unit Specifications: - Power 7kva - 6.3kw. - Tilting Crucible with easy replacement. - Capacity approx. 5kg Gold. - Ability to melt gold, silver, copper, brass and alloys. - Graphite or Silicon Carbide crucible. - Manual tilting. - Maximum temperature 1350 degrees Celsius. - Metal stirring for proper sampling. - Flame in propane bottle to prevent oxidation in the metal. The price includes the Italimpianti specially adapted moulds which fit directly to the tilting unit in very good condition."
used
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg
used
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg
used
Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg