128,153 used machines on RESALE, but how to find them? Machine Search
Cariba C300 horizontal cartoner with automatic bottle infeed, continuous motion, reverse tuck closure, GUK pre-folded leaflet inserter, carton size range: min. 15 x 15 x 55 mm (AxBxC), max. 150 x 90 x 220 mm (AxBxC), output up to 250 strokes/minute, electrics 400V/50Hz, machine net weight approx. 2000 kg
Carpentier HSA/60-2/V4 and GV-HM + 2 head folding carton erector HSA/60-2/V4 hot melt and straight seamer GV-HM hot melt + 2 stamp sets for 2 formats available: 188 x 150 mm and 195x 145 mm + meler micron 4/4-120P hot glue machines, incl. manual glue gun + Operating instructions and circuit diagrams available + Siemens S7-300 + Simatic Panel HMI + Videojet coding + Built in 2009 + Like-new condition sartorius EWK 3010 Checkweigher + Built in 2009 + Mint condition Conveyor belts, curved belts + Stainless steel link chains + Drive + Mint condition At call
Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...
Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 100-600 mm (L x W x H) Taping units 2 x K11R for 50 mm wide tape Electricity 500W / 380V / 240V / 50 Hz Certificate CE compliance
\cf1Indexed machine for double-sided offset tuck-in flap Format range W 15 - 80, H 15 - 60, L 50 - 180 mm Output max. 50 packs/min Tube infeed conveyor from tube filler to cartoner, ascending, 90° angle, built in 2014 Tube transfer station at the product infeed Brochure folding and inserting machine, triple fold Blind embossing printing device opposite insertion side, 2 lines, without embossing numbers Leaflet presence and carton presence check Bad ejection with ejection counter-check Vacuum pump Machine housing with safety switches PLC Siemens S5-100 U 220/400V/50Hz drive Machine was overhauled by Hohenstein in 1995 and 2014 Has worked in line with tube filling and sealing machine 02-0753, see also complete line 13-0113
We have the Tetra Pak 32 CBP Cardboard Packer in very good condition in our warehouse. For more information, please contact us.
Format range folding box (5 inch) W 20-95, H 16-70, L 60-200 mm Output max. 100 folding boxes/min, intermittent motion Closure double-sided offset tuck-in flaps Leaflet folding and inserting machine from magazine Bosch FM 75-3 Code reading Leatus Argus 6012 (1x brochure) Bad ejection Vacuum pump Contactor control Connection 400V/50 Hz
Attachment with feed table for unfolded paper 4 buckle plates Drive via toothed belt (drive not included) Handwheel left Paper format max. 215 x 570 mm, min. 60 x 130 mm Bar code laser scanner Laetus Argus 6012 2 pcs. reading heads
Offer 4x Cargo-Liner SP1/SP4 VKD suitable for the Linde tow tractor Linde P30C. Max. payload 500 kg Max. towing weight 3000 kg The cars are little used and in good condition.
Semi-automatic vertical intermittent motion cartoner in Stainless Steel with output up to 70 boxes per minute (depending on product type and number of operators) Suitable for Pharmaceutical, Cosmetics, Nutraceutical, Contract Packing, Biopharma, FMCG, Medical Devices and other industries. Excellent condition for age - originates from a prominent Pharmaceutical manufacturing in Europe, where machine was serviced on regular basis. Equipment size: L: 3300mm x W: 1600mm x H: 1,900mm Weight total: approx. 1650kg Technical info: Carton box size range: - Width: 20mm to 115mm - Depth: 15mm to 75mm - Height: 50mm to 195mm - Width + Depth (max) up to 190mm CE marked Fitted with side cassette feeder for empty boxes Pre-folded leaflet inserter (leaflet dimensions: Length: 100 to 210 mm, Width: 18-45 mm) Fully guarded with interloc ...
Elec: 380 V / 50 Hz , Pressurized air: 6 to 7 bars , Integrated vacuum pump: Yes, A (mm): 20-85, B (mm): 17-65, C (mm): 50-200, Dimensions (mm): 3700x1860 H2060, Documentation: Yes
Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Carbon electrode package of 50 pieces -Type: Carbonair 10 x 305 -Identification number: W 000 010 446 -Quantity: 9 packages available -Price: per package -Transport dimensions: 320/105/H55 mm -Weight: 2.1 kg/package
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.
used
1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.
Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.
Completely obsolete in the sales order GUK folding apparatus FA21/4 Cartonac 81 / 91 4 folding plates. Feed table with side shift for Planoformate Max 215 x 320 mm Min. format 60 x 130 mm unfolded Performance 400 FS / min Optional: Indent center / left / right drive side right / left / investor table: 450-600 mm Round to cover optional Paper weight 50-80gr / m ² (single-layer), 37-50gr / m ² (multi-layer) Power requirement: 2,1KW, 400V 3 pH, 50 HZ Air consumption: 6bar / 15 l/min (for dowry soft or opt. Pneum. Marking device) Continuously adjustable AC drive for folding machine frequency inverter,. Motor protection switch for pressure vacuum pump. Cover with safety contact
Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...
1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...
Make: Carrier Type: QUIETIS WPH31A 400/3/50 Refrigerant: R404A Built: 2013 Price on request
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CARRIER 30 RA 040 Brand: CARRIER Type: 30 RA 040 Stock number: M21-4526 Cooling capacity: 39.3 kW Application: Cooling Number of fans: 1 Refrigerant: R407C Refrigerant Content: 10 kg Voltage: 400 Volts Power consumption: 30 A Dimensions: 2100 x 1100 x 1400 mm Weight: 526 kg Year: 1999 Number in stock: 1 piece(s) Price: Quote request Description: Nice air-cooled Carrier chiller with 1 scroll compressor on 1 circuit. This machine is equipped with coated fins, a Pro Dialog Plus controller and a hydromodule (water pump and expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration
Qty 1 x Carter MK3+ Banbury internal mixer, chamber volume 90L, batch weight approx 85kg, 2 wing tangential rotors, drilled sides, roller bearings, hydraulic drop door with linear actuator and spade latch. F type dust seals. With 325kw, 1070rpm, 715A, DC variable speed motor and controls. Pneumatic hopper. Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds).
Endmass Cary 1, Frank 0, Frank 1, Sel gr. 0, Sel gr. 1
Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).
Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.
CARRIER 30 RB 033 Product number:M18-4307 Cooling capacity:33 kW Number of fans:1 Refrigerant:R410A Refrigerant Content:8,6 kg Voltage:400 Volt Power consumption:10,15 kW Dimensions:1002x824x1790 mm Weight:262 kg Year:2016 Number in stock: 1 piece(s) Price:Quotation request As good as new air-cooled Carrier water chiller with 1 fan and 1 scroll compressor. Mentioned capacity at a water temperature of 12/7°C and an ambient temperature of +35°C. Please also visit our website: used-refrigeration
Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.
Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm
1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...
2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T
Chiller , Carrier 30HXC200, water-cooled , Y.O.M. 2008/2009, very good condition, approx. 700KW/ 200ton cooling capacity
Carrier screw compressor with receiver Motor: 93KW/2900rpm Displacement:504m3/hr R134A 400/3/50hz Ready for operation
Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available
Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...
We offer a used SMC Carousel mini load of the manufacturer SSI Schaefer for sale. Specifications: Powerful modular shelving system for small goods (miniload), 68 container racks with 12 levels per carousel Container 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 memory locations The entire system (miniload, flow racks, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum walking speed 0.6 m/s, Machine location: 89-600 Chojnice/Poland Machine is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl
Stand unit with steel plate with C99 control Measuring ranges: x=5000 mm, y=2600 mm, z=2100 mm Measuring plate: 6000 mm x 3000 mm Rotary swivel head RDS for TP Control panel Dynalog Travelling control unit on the stand, opto-coupler, screen, keyboard, mouse Active vibration damping Without software and hardware. We reserve the right to make changes and errors in the technical data as well as to make the interim sale. Price plus transport and installation.
used
Pumps Cardinal Health Alaris CC/GH Cardinal Health Alaris GW Bbraun Perfusor FM Bbraun Perfusor Compact Bbraun Perfusor Space Bbraun infusomat Space P Fresenius Pilot A2/C Fresenius Orchestra DPS+A+bases Fresenius Optima ST Fresenius Orchestra MVP PT/ST Fresenius Volumat/Injectomat Agila Fresenius Injectomat MC Agila
Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg
Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With suction device and table The upward-opening door keeps the hot surface away from the user Gently self-closing door (for 5, 13, 21 & 23 litre models) Standard start-up delay and process timer function Durable alumina backing plates for the heating elements; Robust door frame and base plate High-quality fiber insulation with low thermal mass Powerful heating elements on both sides ensure very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing More items new and used - you can find them in our shop! International shipping costs on request!
Technical data: - Load capacity 7 t - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 2 x arm length 750 mm - 1 x arm length 850 mm - Traverse dimension approx. L 1500 x W 1300 mm - Weight with chains approx. 200 Kg
Technical data: - Load capacity 10000 Kg - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 1 x arm length approx. 700 mm - 1 x arm length approx. 800 mm - 1 x arm length approx. 1100 mm - Traverse dimension approx. L 1600 x W 1400 mm - Weight with chains approx. 200 Kg
Used Carrier 30 RA 080 air cooled chiller on R407C. Complete with 2 Performer SZ185W4PC scroll compressors, condenser with 1 fan - 50 Hz - 1,8/0,3 kW - 945/470 RPM and a total airflow of 20.880 m³/h, braced heat exchanger as evaporator with a water volume of 7,6 liter, water pump, expansion vessel and a control cabinet with a Carrier Pro-Dialog Plus display. Specifications: Brand: Carrier Type: 30 RA 080 Product type: Air cooled chiller Capacity kW: 79,0 kW Capacity tons: 22,5 tons Refrigerant: Freon Refrigerant type: R407C Weight: 631 kg Dimensions: 2100x1100x1330 mm (LxWxH) Compressors: 2 Performer SZ185W4PC Number of fans: 1 Fan specifications: 50 Hz - 1,8/0,3 kW - 945/470 RPM Amount in stock: 1
Optimize existing production line Carsoe Anytray Denester The automatic feeding of the AnyTray CleanLine denester from a buffer of full height tray stacks offers less manual intervention and lower operating costs. The AnyTray electrical buffer is easily integrated into an existing production or packing line. It includes an intelligent electrical control system and a hygienic design. This electrical buffer has few moving parts and low maintenance costs thanks to its design. Speed up to 120 trays per minute. Stainless steel Good working condition
maximum number of results exceeded
please refine your search
