cap used for sale

Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machines controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12 touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data Manufacturer: Ortmann + Herbst Model: Hansa B 100/20 Year of manufacture: 1994, completely refurbished 2013 Machine type: rotary filler with screw capper,  ...

This bottle distribution and sleeve-wrapping production line includes the following equipment: Machine 1: Bottle Distributor - Manufacturer: BCM - Model / Type: 1750-020 - Year of manufacture: 2002 - Speed: 200 bottles per minute - Number of channels: 16 - Width of the channels: 110 - Mini format: 50 x 25 x 100 mm - Maxi format: 100 x 50 x 250 mm - Electrical connection: 3 x 400 V N+T - Installed power: 50 Hz, 10 KVA, 20A - Pneumatic functioning pressure: 6 to 8 Bars - Pneumatic connecting section: diameter 9 - Pneumatic consumption: 120 L per minute Machine 2: Sleeve Wrapping Machine - Manufacturer: Sleeve Technology - Model / Type: HSSA1500 + HA - Year of manufacture: 2020 - Function: device designed for applying foil sleeve wraps to products - Speed: 50 pieces per minute - Current capacity: 50 ml bottles - Machine number: 1907085 - Voltage: 3 x 400V + N + PE - Frequency: 50Hz - Po ...

Used IMA capsule machine type Hermetica 50. Year of manufacture 2011. CE Manufacturer's documentation. The key to a perfect capsule closure. The HERMETICA system, designed for capsule closure with anti-opening protection, was created based on experience dating back to the 1970s. Its ergonomic design guarantees maximum visibility and the best access to every step of the process. The HERMETICA system is ideal for sealing capsules filled with liquid, powder or other products. The seal is achieved by applying a liquid gelatin ring to the outer surface of the capsule.

Used AROL speciale kamma PKV capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol rotary capping machine is designed for automated bottle closure in a used bottling line. The Speciale Kamma PKV model combines rotary operation with neck-grip transfer, providing controlled bottle handling through the capping process. It is configured with five capping heads and a maximum speed of 10000, supporting efficient industrial packaging operations where consistent closure application is required.Manufacturer: ArolModel: Speciale Kamma PKVYear of construction: 2013Capping heads: 5Maximum speed: 10000Machine configuration: RotaryBottle transfer: Neck-grip transferWorking-table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for coordinated operation of the rotary capping cycle. Clockwise working direction is specified. Electrical ...

Used OLMOS compact eco2 linear capper labeller - glass and PET Technical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable t ...

Stock number: F1133, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Capsule tightener, Standing: On a stainless foundation, Capsule : For plastic screw caps, possibly with pump, Motor: 0.05 kW - 240 Volt - 10 A, Dimensions: L 650 x W 700 x H 1400 mm, Other: Prepared for conveyor

Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Manufacturer: Kematec Model: MBK 12 AS Year of manufacture: 2006 Machine type: capsule placing and shrinking machine Output: 3,000 - 12,000 bottles/h Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm Head diameter: 33 mm Heating stations: 12 Capsule magazine: 1,800 capsules Bottle height: 235 - 360 mm Bottle diameter: 50 - 115 mm Working height: 1,100 mm (+/- 50 mm) Direction of travel: left to right Power supply: 400 V, 50 Hz; main drive 0.75 kW Compressed air: 6 - 7 bar, approx. 350 l/min Overall dimensions (L x W x H): 3,7 ...

Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Year of construction unknown The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be placed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

G7100A CE Instrument Device sold without PC Auction-ID: A1-50979-102

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Serial number 0042-08-2006 Year of construction 2006 The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be placed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

BULLE pistol-type pneumatic sheet metal shear (air shear). Air consumption 160 l/min at 6 bar operating pressure, 1/4\" air inlet connection. Cutting capacity 1.4 mm, 2200 r.p.m., total tool length 210 mm, weight 2.2 kg. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-40

Tube-Tec Downhole Cables and Control Lines – Mixed Lot Manufacturer: Tube-Tec Equipment type: Downhole Cables / Chemical Injection & Hydraulic Control Lines Application: Oil & Gas / Downhole Operations Originally supplied for: GA Drilling Location: 91701 Trnava Mixed lot of Tube-Tec oil and gas downhole cables and control lines supplied on wooden drums. Identified components: 130 m single encapsulated chemical injection line – 14 × 14 mm 130 m single 1/4\" OD TEC cable – 11 × 11 mm encapsulation 130 m four-element flatpack – 36 × 12 mm encapsulation Flatpack configuration: 2 × 8 mm bumper wires, 1/4\" hydraulic tube and 1/4\" TEC cable Additional Tube-Tec cable/control-line drums included as photographed Condition: Never used, older stored stock. Testing has not been performed and remaining cable/control-line lengths have not been independent ...

Electric Marine Capstan / Warping Winch Heavy-duty electrically driven vertical capstan winch designed for hauling and tensioning ropes, net lines and other marine equipment. The unit is equipped with a vertical warping head, reduction gearbox, electric motor and welded steel base. Machine type: Electric marine capstan winch Capstan head height: Approximately 300 mm Estimated capstan head diameter: Approximately 450–550 mm Drive: Electric motor with reduction gearbox Controls: Local three-button pendant control Approximate dimensions: 1,300 x 900 x 1,100 mm Approximate weight: 450 kg The winch is offered as a restoration project in poor used condition. Extensive corrosion, deteriorated paint and weathering are visible across the capstan head, gearbox housing, motor mounting area and base. Structural steel around the support and base shows advanced corrosion and a ...

Heavy-Duty Marine Capstan / Mooring Winch Used marine capstan winch with a vertical warping head mounted on an enclosed steel gearbox housing. Suitable for handling mooring, towing and auxiliary marine ropes. Machine type: Marine capstan / mooring winch Configuration: Vertical warping head with enclosed gearbox Controls: Top-mounted handwheel for brake or clutch adjustment Housing: Heavy bolted inspection and gearbox cover Features: Lifting eye and steel gearbox housing Approximate dimensions: 1,500 x 1,100 x 1,100 mm Approximate weight: 900 kg The winch is offered in used condition with significant corrosion, rust staining, coating deterioration and weathering from outdoor storage. The gearbox, brake or clutch mechanism, bearings and drive components require inspection before operation. Auction-ID: A7-50995-13

Gas scrubber bottle with screw cap, graduated, 1000 ml; ; (BUBBLER) SVL COL thread 42mm (VWR); With smooth head and tube. Two fittings with external Ø 8 mm; For laboratory; Capacity: 1 liter; ; Internal reference: FA-1289; Auction-ID: A1-50994-1124

Gas scrubber bottle with screw cap, graduated, 1000 ml; ; (BUBBLER) SVL COL thread 42mm (VWR); With smooth head and tube. Two fittings with external Ø 8 mm; For laboratory; Capacity: 1 liter; ; Internal reference: FA-1289; Auction-ID: A1-50994-1125

Approximately 60 rolls on 1 pallet and various electronics components on 1 pallet Auction-ID: A1-50244-89

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Manufacturer-tested used battery with measured residual capacity of 98% Battery 48V 5 PZS 775Ah, voltage measured at rest with 51.6V . Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-51195-1080

Technical description brewing installation – 550 litres Complete professional stainless steel brewing installation with a net boiling capacity of 550 liters. The installation is fully manual, without PLC or electronic process automation. Composition of the installation: 1. Hot water boiler – 300 liters - Stainless steel, single-walled and not insulated - Propane heating - Equipped with pump for the rinse water 2. Mash kettle – up to 600 litres net - Stainless steel, double-walled and insulated - Propane heating - Mash is transferred to the lauter tun with a pump 3. Filter tun - Stainless steel, double-walled and insulated - Perforated filter bottom - Large manhole at the front for removal of spent grains - Spray ball for rinsing with hot water from the hot water boiler 4. Boiling kettle – 550 liters net - Stainless steel, double-walled and insulated - Propane heating -  ...

From Sandvik and ISCAR, weight 2kg Auction-ID: A7-51245-110

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

Weight 6 kg Auction-ID: A7-51245-78

Also from Wodex, partly new, weight 6kg Auction-ID: A7-51245-109

Viewing by appointment Auction-ID: A1-40330-110

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

Captair Store AVPD 804 double filter cabinet / chemical cabinet with extraction Specifications: Brand: Captair Store Model/Type: AVPD 804 Number: APD 1812 05 Product Type: Laboratory Filter Cabinet/Chemical Cabinet Version: double high security/storage cabinet Connection: 230 V Frequency: 50 Hz Power: 47 W Dimensions of cabinet 2: approx. 1,600 x 510 x 2,180 mm (W x D x H) Features: Double high filter box Integrated extraction / ventilation Lockable doors Transparent door panels Keys Multiple adjustable shelves Drip trays Sampling point Filter unit on top Control switch Ventilation grilles at the bottom Internal air circulation / extraction CE marking Cabinet 2 with extraction Cabinet 2 with drip tray/drip tray Cabinet 2 with lockable doors and keys Particularities: Suitable for the controlled storage of laboratory chemicals and other suitable substa ...

2 rooms, kitchenette with Daalderop boiler, toilet, heating element and various furniture. Sunshade Auction-ID: A1-47450-1914

200 hL – Gimar – Fiberglass tank with floating cap Technical characteristics Floating cap tank Dimensions Diameter: 2400 mm Height: 6800 mm Location: Civray Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-266

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

Mostly new, also from Sandvik Auction-ID: A7-51245-99

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

Stock number: F1115, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Capsule machine, Capsule: Capsule head with claws, Variable speed: Yes, Capacity: Max 1,200 pcs/h, Dimensions: D 1250 x W 750 x H 1800 mm, Conveyor side frame: W 114 x L 750 mm, Other: Variable moment - Vibrator out sorting - Bottle lock

Semi-automatic benchtop capping machine C.M.C. S.N.C Model: CM/RE 500. 700 to 800 samples/hour. Auction-ID: A1-51318-5

Automatic rotary screwdriver crimping machine for bottles Equipped: - Plastic pallet bottle infeed conveyor width 82 mm length 2200 mm - Vial presence control station - Vial spacer auger - 4-dimple entry star - 4-cell transfer star to crimp/screw station - On-the-fly plug pick-up station - Automatic mechanical bowl feeding - 6-head rotary crimping/screwing station - 4-dimple output stars - Traffic jam checkpoint - General drive by motor-variator - Protective housing with safety - Stainless steel frame Current tools: - 125 ml bottle - 150 ml bottle - 200 ml bottle Maximum capacity: Bottle diameter 180 mm - height 365 mm Maximum hourly production: approximately 12000 vials Total electrical power: 2 kW Maximum compressed air pressure: 4 bar Auction-ID: A1-51318-206

Overall length: 15.22 m long Total height: 3.00 m high Auction-ID: A1-51285-380

Semi-automatic sorting machine Equipped: - Conical stainless steel hopper. Capacity 80 liters - Vibrating stainless steel corridor for the bottom of the hopper and product discharge - length 500 mm - width 225 mm - Teflon roller conveyor length 750 mm - width 270 mm for product sorting Mounted on wheels Electrical power: 0.5 kW Compressed air pressure: 4 bar Auction-ID: A1-51318-218

Stainless steel vibrating bowl Sold as is, untested Equipped: - Conical bowl diameter 460 mm - Conical bottom - Corridor width 50 mm - Clockwise scrolling - Vibration dimmer Current tools: Product diameter 8 mm or smaller Auction-ID: A1-51318-234

Brand Name: CESAB Equipment Type: Boom Crane Center of gravity: 500 mm Equipment mass: 106 kg Indicated lifting height: 5,000 mm Residual load capacity with centre of gravity H = 3,000 mm: 1,100 to 350 kg depending on boom position Residual load capacity with centre of gravity Hmax = 5,000 mm: 890 to 300 kg depending on boom position Arm adjustable to 8 positions Lifting hook Auction-ID: A7-51362-65

Equipped with Parker hydraulic motor Auction-ID: A1-50889-108

The JCB-TH22504 is a robust and durable hydraulic garage jack, designed for a maximum lifting capacity of up to 2.25 tonnes. Protective rubber pad: Prevents scratches or damage to the vehicle during lifting. Extra-long design: Provides extra leverage and stability when lifting. Increased lifting height for SUVs: Suitable for lifting taller vehicles such as SUVs. Heavy-duty steel construction: Ensures stability and durability. Swiveling rear wheels: For smooth maneuverability and precise positioning. Swivel saddle: Allows easy and precise positioning. Built-in safety valve: Protects against overloading of the jack. Hydraulic oil bypass system: Prevents the cylinder from being extended too far. Magnetic tool tray: Handy for storing tools and small parts. Net weight: 21.5 kg. Auction-ID: A1-40333-60

Battery empty. Auction-ID: A1-51437-10

Two robust rectangular cutting blades and six sharp triangular chipping blades designed to pull in and shred branches up to a colossal diameter of 120mm. 15 hp - 4-stroke JCB petrol engine, 457 cc, with electric start. Equipped with a 360° rotatable exhaust and guide, 400 mm diameter pneumatic tires and built-in off-road tow bar, belt drive. Opening size feed hopper 588x440 mm, feed opening 278x167 mm, disc size (diameter/thickness) 600 mm. Model: JCB-CH150120PE Engine: JCB-E460PE 4-stroke OHV, 1 cylinder Engine capacity: 457 cc Power: 15 hp Starting method: Electric and pull start Drive: Belt Shredding capacity: 120 mm Infeed hopper (mm): 588 × 440 Feed opening (mm): 278 × 167 Disc diameter: 600 mm Blades: 2 slicing blades + 6 shredding blades Disc speed: 1800 rpm Fuel tank capacity: 6.5 litres Engine oil: SAE 30 or 15W40 Oil capacity: 1100 ml Net weight: 260 kg Gross weight: 294 kg ...

Odometer out of order Weak battery when not in use Brake fluid leaking Vario makes noise Auction-ID: A3-46103-15054

5-axis machining center with integrated milling-turning function, equipped with an HSK-100 spindle, a tool magazine for 191 tools, and an NC rotary table Ø 1,200 mm with up to 400 min⁻¹. The machine features a 2-/5-fold pallet changing system with pallet dimensions of Ø 1,200 × 1,000 mm and a load capacity of up to 2,000 kg. Manufacturing No. 10243.02400

ClickFit Evo Mounting Rail End Cap, Gray Article number: 100-8060 EAN: 8719925881824 100 pieces per box, 13 boxes Weight per piece: 0.03 kg Weight per box: 3 kg (gross) Auction-ID: A1-50174-831

Captair hood. Provide new filter according to your application Internal Dimensions Length 746cm, Height 712cm, Depth 571 cm External Dimensions Length 799 cm, Height 967 cm, Depth 625 cm Auction-ID: A1-51535-456

Captair hood. Provide new filter according to your application Internal Dimensions Length 746cm, Height 712cm, Depth 571 cm External Dimensions Length 799 cm, Height 967 cm, Depth 625 cm Auction-ID: A1-51535-458

Captair hood. Provide new filter according to your application Internal Dimensions Length 746cm, Height 712cm, Depth 571 cm External Dimensions Length 799 cm, Height 967 cm, Depth 625 cm Auction-ID: A1-51535-454

Captair hood. Provide new filter according to your application Internal Dimensions Length 746cm, Height 712cm, Depth 571 cm External Dimensions Length 799 cm, Height 967 cm, Depth 625 cm Auction-ID: A1-51535-451