We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,840 used machines on RESALE, but how to find them? Machine Search
used
Key data: 85
Make and Model: MAN E2866E - REBUILT This MAN E2866E engine has been fully rebuilt with genuine MAN heads. Year: 1997 Hours: 50,000 kW: 85 Fuel: Natural Gas Hz: 50 V: 415 Scope of supply: Engine, Alternator, Control panel (Comap), Exhaust Gas Heat Exchanger, Water pump, Canopy with new foam sound attenuationand internal mesh. Service details: Exhaust Gas Heat exchanger cleaned and new insulation fitted. New Plate heat exchanger fitted. New Canopy Fan installed. Engine water pump overhauled and new seal fitted. Control system fitted with Comap control all passwords available. Unit fully cleaned & sprayed. Canopy fitted with new foam sound attenuation and internal mesh. New GAC governor & Actuator fitted. Electronic Ignition fitted. New canopy light fitted. Skid rewired with new temperature & pressure probes fitted. New condensate drain and trap fitted. New ...
used
MAN E0836 E302 CHP Unit in Acoustic Canopy. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Price: Please Apply
used
Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply: Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.
used
Power: 250 kVA / 200 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / 101801/38 Cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AEG / SJRJ 80e/4 d / 806129 Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 rpm Design: soundproofed canopy Tank: approx. 720 l Switchgear / Starter: Automatic with no brake return / electrical Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: DEIF, type BGC 108 Dimensions (L X W X H): Approx. 4000 x 2500 x 2500 mm Year of manufacure: 1972, built into canopy 2016
new
CPD05 Self-Lifting Truck with Canopy - in GREEN The red forklifts show the canopy (sample images) Colour: green Model No.: CPD05 Power Source: Electrical/Battery Battery Type: 48V/45Ah Charging time: 4-5 hours Runtime: 6-7 hours Rated loading capacity: 500kg Lifting height: 2000mm Weight: 750kg Load center of gravity: 400mm Fork length: 920mm Overall length: 1430(L)800(W)1550mm(H) Lifting motor: 1 kw Walking motor: 1.5 kw Maximum climb (load): 30. Minimum distance to the ground: 200mm Mast inclination: 8th/12th Front Wheel/Rear Wheel: Solid Rubber
new
CPD08 Self-Lifting Truck with Canopy – Colour GREEN The red forklifts show the canopy (sample images) Model No.: CPD08 Power Source: Electrical/Battery Battery Type: 48V/52Ah Charging time: 4-5 hours Runtime: 6-7 hours Rated loading capacity: 800kg Lifting height: 2000mm Weight: 1000kg Load center of gravity: 400mm Fork length: 920mm Overall length: 1550(L)830(W)1600mm(H) Hoist motor: 1.3 kw Walking motor: 1.5 kw Maximum climb (load): 30. Minimum distance to the ground: 200mm Mast inclination: 8th/12th Front Wheel/Rear Wheel: Solid Rubber
used
Power: 450kVA / 360 KW Diesel engine (four-stroke) / type / no.: IVECO 8281 SRI 2709 / 509102 Cylinders: 8 V Cooling: water cooled Alternator / type / no.: Leroy Somer 47.1 L9 C6/4 / FJ092825/01 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm
all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW
used
Diesel - Forklift, compact stacker MORA type M80CS Fabr. No. 20087 Year of construction 2006 Nominal load capacity 8 ton. Lifting height 3800 mm Fork length 1800 mm Fork carrier width 1460 mm Construction height 3030 mm Total width 1460 mm Total length without forks 3350 mm Net weight 12740 kg- Duplex mast with 1950 mm Free stroke - 4 cylinders PERKINS diesel engine - completely enclosed cab with heating - electrohydraulic tilting device for the cab - hydraulic auxiliary steering - 2 work lights front, 1 piece work light rear - yellow warning - flashing light on the canopy - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read - UVV-TÜV approval New good condition rental on request; used
new
Additional options New/unused EPA marked Yes Engine Mitsubishi S12RPTAA2 Generator power 1650 kVA Generator Mecc Alte ECO46-1S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,000 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well. For more information, please download the specification sheet.
new
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA 1915 kVA generator power Generator Mecc Alte ECO46-2S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,950 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.
new
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.
used
all stainless steel suitable for thermal oil heating 209 kW suitable for fire protection with top hold down belt isolated canopy infeed belt oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with manual hoists dimensions (l x w x h) : ± 8.900 x 2.000 x 4.000 mm
new
Key data: 120 , 150 , 400
New Gensets 120kw 150KVA PRIME, 165KVA STANDBY, ENGINE Cummins 6CTA8.3G2 With Stanford type alternator, with deep-sea UK control panel system , With sound Proof canopy.
used
SPECIFICATIONS: Galvanized cantilever racks with canopy for outdoor use Shelf height mm: 5000 (18 elements) Shelf width mm: 1800 (54 elements) Complete with 18 beams of length mm 3000 and corresponding covering film
new
New Gensets 160KVA PRIME, 175KVA standby, ENGINE Cummins 6CTA8.3G2 With Stamford Type alternator, with deep-sea UK control panel system , Into sound Proof canopy.
used
Power: 200 kVA / 160 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AvK / DKB 55/200-4/420703 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm
used
MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Hours: 200 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply: Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories. Price: 25,000€
used
Power 300kva Cummins NTA855 Series diesel Generator set in Sound proof canopy available in stock..
new
Brand: Ashita Model: AG3-125 Year of manufacture: 2023, Unused Serial Number: 2302064 Capacitance (KvA) 125 Capacity(kw) 100 Engine model 4RT55-110D Capacity motor (Kw) 110 Fuel: Diesel Alternator model YHG100 Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 180.4 Dimensions LxWxH (mm) 2630 x 1140 x 1290 Weight (Kg) ca 1370 Number of pieces in stock 1 Made in China Comments Unused diesel generatorset with CE, soundproofed canopy, 125 kVa output
used
Key data: 1560
Complete Greenhouse Caterpillar G3512H Generating plant with Codinox. This Caterpillar 3512 generating set is in good condition and has run for only 7,500 hours. Make and Model: Caterpillar G3512H Hours: 7,500 Year: 2018 Capacity: 1560KW Fuel: Natural Gas HZ: 50 V: 400 Electric power 1,500 kW Thermal capacity 1,746 kWth Fuel input (+5%) 3,440 kW Gas consumption (+5%) 391 m3/h Electrical Efficiency 43.6% Thermal Efficiency 50.8% Scope of supply: Complete unit including Engine, Alternator, Base Frame, Control Panel (CAT), Nox Controller, Exhaust gas heat exchanger, HUG Codinox and Acoustic Canopy. Price: €370,000 Available for Sale Now.
used
Japanese Generator set Brand Airman 200kva Prime Power only Run 3643 hours ,used low hour Japanese Airmen Diesel Genset available in stock for sale, Hino ENGINE WITH Japanese ALTERNATOR WITH original Airmen CONTROL PANEL SYSTEM WITH SOUND PROOF CANOPY.
used
Used 20kva Prime 22kva standby with FG WILSON Brand, Perkins 404D-22 series Engine with Leory Somer Alternator, Modal : 2008. with sound proof Canopy.
used
Galdi filler for food liquids, milk-juice-yogurt-etc. Machine filling 2,000 liters per hour in gable top carton, fed with folded containers that are automatically formed, seals the bottom filled with product, extracts the possible foam and seals the canopy. Later drag gravel on batch and date fire. Polyethylene drag chain. Volumetric dispenser with piston. Product tank Stainless steel 26 liters and level check by probes. With connection pieces for cleaning in place. Structure entirely in stainless steel. Made in europe with eec / 89/392 standards. Riempitrice automatica gable top filling machines
used
Key data: 650 mm, 600 mm, 500 mm
Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany until week 49 / 2023 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ ...
new
Key data: 16
20kva Prime 22kva standby YD Engine with Stamford Alternator with DSE digital controller with Sound proof canopy Genset.
new
30kva Prime 35kva standby YD49 Engine with Stamford Alternator with DSE digital controller with Sound proof canopy Genset.
new
New 40kva diesel generator set with YangDong engine Y4105D With Stamford Type Alternator with Deep-sea Controller into Sound Proof Canopy.
new
50kVA 40kw Yangdong Engine with Stamford Type Alternator with Deep-sea Controller in Silent Canopy Diesel Generator.
used
Man 50kva gas generator set in Canopy available in stock.
used
Key data: 650 mm, 600 mm, 500 mm
CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of construction: 2003 Travel : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC Swivel Rotary Table Ø 630 mm Vertical tool changer with 32 magazine slots Linear axes standard version Coolant system Manual Cab Door , Manual Cab Canopy Laminated glass - safety pane Electr. iTNC handheld control module 3 D Probe Heidenhain Spindle Oil Cooler Chip Sweeping Gun Modification SRT 630 paral. T –Grooves 14 H7 4 Pieces of Height Adjustable Machine Shoes Operating instructions
used
Key data: 140 , 400
Complete plug-and-play natural gas plant. Make and Model: MAN E2876 E312 Capacity: 140kW Year: 2016 Hours: 6954 Fuel: Nat Gas Volts: 400 V: 50Hz The plant was oversized compared to the needs of the factory in which it was located, and for this reason it was sold despite the low number of operating hours. Scope of Supply: Engine alternator control panel gas line acoustic canopy muffler air intake filter exhaust air filter and other accessories. Price: Please Apply
used
Key data: 650 mm, 600 mm, 500 mm
Manufacturer : Hermle Model: C 30 U Number of machines : 1 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 95000 h Spindle running time : 28000 h Location : Germany from stock Hultfred - Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ ) - Touch probe ...
used
350kva Prime Power Cummins NTA855G2A with Leroy somer alternator with Analogue Control Panel with sound Proof Canopy. Yom 2011, Running Hours 1671. For any further information contact by WhatsApp 0092 300 2444941
used
Key data: 650 mm, 600 mm, 500 mm
Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany Dismantling in week 5 / 2024 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar poss ...
used
Emergency generator Condition: Used very good condition Power: 150kVA Description : Generator : PRAMAC Range : Canopy soundproof Engine : PERKINS Type : GSW 150 Year : 2014 Operating running hours : 21 H integrated tank high capacity Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher #kta50
used
CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of construction: 2006 Travel : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC Swivel Rotary Table Ø 630 mm Vertical tool changer with 32 magazine positions ( SK 40 ) Additional magazine 87 tool positions ( ZM 87) Linear axes standard version Internal coolant supply (IKZ 40 bar) Scraper belt conveyor Coolant system Blow-off device Manual Cab Door , Manual Cab Canopy 3 D Probe Heidenhain BLUM Wz-Bruch/ Surveying Electr. Heat compensation iTNC Modification SRT 630 paral. T –Grooves 14 H7 4 Pieces of Height Adjustable Machine Shoes Operating instructions
used
Overview This complete filling line for single-use glass was delivered in 2019. Commissioning was stopped in Q1 2020, and resumed in Q4 2021. The line has been running 2/3 days per week since Q4 2021. The line can do 20 variations of bottles including 300ml, 330ml, 500ml, 568ml & 650ml. Components Depalletiser | Emmeti | MT565 | 2016 Siemens Simatic controls, Harford control panel. Bottle outfeed conveyor, plastic chain-link 1400 mm x 9.6 m with tapered outfeed on stainless steel supports. Krones Glideliner Accumulator with tapered outfeed, 850 mm to 350 mm wide Empty bottle inspector | Krones | Linatronic | 2003 60,000 bottles per hour Throughfeed stainless steel slat chain conveyor Height adjustable legs complete with dust canopy. Left to right orientation Filling block for glass | Krones | 2003 rebuilt 2018, installed 2019 Capacity: 50.000 bottles/h at 0,33 l long-neck glass bottle ...
used
Key data: 600 mm, 450 mm, 450 mm
Hermle C 600 V, Built in 2005, Control Heidenhain iTNC 530, Travel X/Y/Z 600/450/450 mm, Spindle speed up to 16,000 rpm, Recording HSK 63, Ww 30 speed, rigid table 800 x 465 mm, electr. Handwheel 3D touch probe, Heat compensation, coolant device, Chip pan, closed canopy,
used
Key data: 800 mm, 600 mm, 500 mm
Hermle B 300, Year of construction 2009, Control Heidenhain iTNC 530, Travel X/Y/Z 800/600/500 mm, Spindle speed up to 15,000 rpm, Recording HSK 63, Ww 30 speed, Chip pan, coolant device, rigid clamping table, closed canopy, electr. Handwheel 3D touch probe,