can line used for sale

Pallet cans 99/130, 700 cans with lid red size 99/130 Auction-ID: A7-45677-97

Runs and drives well; Auction-ID: A1-42013-17

Including table Auction-ID: A1-45762-126

Cantilever rack, two-sided, height 2.90m, arms 1.20m with 2 trusses each between the arms / levels, ideal for storing goods e.g. on Euro pallets - used - : Price ex site: 24.500.-€ (net) incl. dismantling and loading! Price for partial quantities on request – minimum order shelf by shelf! Manufacturer: Bruckamp Regalsysteme Type: unknown Year of Make: 2005 Max. arm load: 2,000kg Arms screwed Load: max. stand: 2 x 2,000kg Projection per arm: 120 cm (IPE 100 standard) Total height per shelf: 2.90 m (IPE 160) Number of shelf stands: 69 pieces (3 x 23 pieces currently) Wheelbase between the frames is 1240mm. The heights of the middle levels and the top levels are fixed. One could use this ev. with new boreholes. There are no pre-drilled holes. Variant / Shelf A: 3 divided on both sides Variant / Shelf B: No middle subdivision Variant / shelf C:  ...

KHS can filler, Innofill, 50 filling valves, standard can 500 ml, Sleek can 330 ml, can lid 202, with Ferrum seamer F8, year of manufacture: 2008, with can lid magazine KHS Can Filler Filling Canning, Innofill, 50 Filling valves, Standard Can 500ml / 0.5liter, 50cl, Sleek Can 330ml / 0.33l, 33cl, Can end lid 202, with Ferrum can seamer F8, year: 2008, with can end lid magazine

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspe ...

A canister filling system for the food industry is available. Dosing system: piston dosing unit, container: 80l, dosing cylinder: V4A, control: Knorr, filling range: 1000l-10150l. Documentation available. On-site inspection is possible.

Building width 9 m Length 18 m Height 6.2 m Wind zone 1 Snow Load Zone 2 Monopitch roof inclination 10 degrees.

paint can vacuum cabinet; cleaned and tested; suitable for paint cans up to 2.5 kg; new windscreen; Incl. Colour stirrer Easymix. Color can vacuum cabinet; cleaned and checked; used for cans till 2.5 kg; new front panel; incl. Ink mixer Easymix.

Fully automatic can holder/bottle display from Tölke incl. feeder. Perfectly functional, used in a production until recently. The can display is sold solely because of a change in packaging of the product. 60 pcs/min Adjustable to different formats, currently set to 400 ml round cans. Can also be used for bottles and other cans of any kind The machine can be visited.

Herma's high-performance labeling machine for lid and side labels. Capacity: 100 labels per minute Round cans were labeled with the Herma (400ml). However, it can also be used for any other cans and bottles. The machine sticks the label all around and also on the lid. The machine therefore has several labeling heads, so that the label is simultaneously labeled all around the can/bottle and is also labeled on the lid of the can/bottle. The machine is in perfect working order. The reason for the sale is the change in the packaging of the product.

Cantilever rack for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized - new product - : Price ex location incl. loading: only 895.-€ (net), plus packaging and freight. Price per additional stand: 225.-€ (net) Price for transport on request! Manufacturer: Bruckamp Year of manufacture: New Type: Super Lightweight Set components: 4 stands with 5 arms / 3 panels with connections Stand distance: approx. 1m Total length of construction area: approx. 3m Shelf height: 2m Foot and arm depth: 500mm Robust construction – made from an IPE 100 with firmly welded arms at a distance of approx. 330mm. Load capacity per stand: 1,000kg Payload per arm: 200kg Incl. ground anchor Incl. stress shield Description: 4 stands with 1 m axial dimension as a set incl. screws. Key benefits: Easy to assemble  ...

Pallet rack, yard, frame height approx. 3.50m to 4m, truss length: 2.70m, - used - : Price (net) from location: only 950 dismantled, packed and loaded: Manufacturer: Hofe Type: SL 25 / RTS 110 Year of Make: 2013 Frame height approx. 3.50m to 4m Frame width: approx. 10cm Truss height: approx. 10cm Frame bracing: screwed Frame depth: approx. 1.10m Number of frames: approx. 9 pieces Bay load: max. 1,600kg Shelf load: max. 1,440kg Field width: 2.70m Trusses: approx. 40 pieces Incl. push-through protection Condition: good Available: from approx. Mid-November Location: Egelsbach Area FFM

A total of 40 copper dragee pans from the manufacturers Pefa and Lichtenberg are available. Material: copper, diameter: 950mm, motor power: 0.8kW. An on-site inspection is possible.

Offer 25521 Double-sided long goods – cantilever rack without contents Technical data: - 2-sided cantilever rack consisting of 10 uprights with plug-in system - Height-adjustable bearing arms - 130 bearing arms - Stand height approx. 6000 mm - Wide stands + support arms approx. 1600 mm - max. arm load approx. 400 kg - Max. drawbar load per support approx. 5000 kg - Center distance of the shelf parts connected to diagonals approx. 1.0 m - Grid spacing for the reg arm - Height adjustment 125 mm - Arm dimensions: L 700 x W 90 x H 70 mm - Stand dimensions W 220 x H 150 mm - Weight per post approx. 400 kg - Weight per arm approx. 10 kg

This state-of-the-art can filling line from Krones was manufactured in 2022 and is designed for the filling of carbonated and non-carbonated beverages. It processes various can formats – including standard, slim and sleek cans – with an impressive output of up to 60,000 cans per hour at 250 ml. The line was serviced exclusively by Krones and has been equipped with original spare and wear parts. With only 4,000 operating hours, it is in excellent, almost mint condition and is immediately available. The scope of supply includes a depalletizer, an empty can inspection, a Modulfill VODM-C filling machine, a Ferrum seamer, a pasteurizer, a modern packaging line including shrink packers (for 6-packs or trays with 12 or 24 cans), as well as various transport, drying and inspection modules. The line is supplemented by a complete CIP system, buffer tanks, a Contiflow processing unit, as ...

(Can process mono-cup and duo-cup) Equipment / Additional information: Machine consists of: -Stacker (Blink) -Sleeve dispenser with 2x sleeve dispenser (Clever) -Steam tunnel, shrink tunnel (Clever) -Packaging unit (Schleuter) Along with this machine, we can also offer you STEAM SYSTEM JUMAG DG 260 (Ref. No. 95005.26)

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

Table can sealing machine 99 mm, no nameplate, max. can height 200 mm, 230 V, table model, purchased before 2000 for 1,636.13 EUR net

Cleaning agents: 1 canister 5 l 20% filled Antisept 11 alcohol, 1 canister 5 l 50% filled Evaporator cleaner 1 canister 5 l, 40% filled Antisept 77% 1 bucket 10 kg Super protein grease remover approx. 80%, 1 canister grease remover liquid w. disinfection 12.5 kg 80%, 1 canister foam cleaner acidic 12.5 kg 15%, hand soap liquid pH neutral 12 kg 70%, Rinse aid CITRUS for dishwashers 10 kg 20%

Food additives Canister Brandy Wine Vinegar 10 l orig. packaging, 1 pc Dry Glucose RC 3311 MHD 2026, 1x 3 kg Food Additive ROBRÜKO, 6 kg, approx. 70% Additive ALL HYGRO 3 kg, approx. 20%

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

8-fold cartridge filter housing with new filter elements on request for an extra charge

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Plastic garbage can OTTO green

Plastic garbage cans green 2 pcs.

Plastic garbage can SSI SCHAEFER anthracite, round

Plastic garbage cans SSI SCHAEFER 2 pcs. anthracite, ø approx. 40 cm

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-44803-183

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-44803-49

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-44803-158

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-44803-11

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-44803-78

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-44803-261

Gastro Table - Can Opener / Industrial Opener / 60 cmâ Product Descriptionâœ" Item Condition: New and Packedâœ" Manufacturer: SCHNEIDER GmbHâœ" Material: Stainless Steelâœ" Length: 600 mmâ Details see pictures

Excl content Auction-ID: A1-44302-227

Equipped with 3x lift-and-slide doors with tilt function, glazing with Wiener sprossen, spotlights and roof glazing Auction-ID: A1-44302-397

Advertising banner in aluminium housing can be rolled up approx. 80x250cm (WxH), advertising Miele

Trash can blue, standing ashtray stainless steel, standing in front of the market

Execution: max. pressure : 10 bar Number of candles : 24 Height : 30" Adapter : 7 (Code: 25) Gasket : Silicone Emptying : none Ventilation : TC 1.5" Surface : Mechanically polished Input/Output Connection: DIN 11851 Male Part DN80

Standing trash can approx. 40x30x60cm (WxDxH)

approx. 24 pieces, canister dimensions approx. 245x290x460 mm, in stock on pallet Auction-ID: A1-45003-90

approx. 24 pieces, canister dimensions approx. 245x290x460 mm, in stock on pallet Auction-ID: A1-45003-87

approx. 24 pieces, canister dimensions approx. 245x290x460 mm, in stock on pallet Auction-ID: A1-45003-89

approx. 22 pieces, canister dimensions approx. 245x290x460 mm, in stock on pallet Auction-ID: A1-45003-91

approx. 24 pieces, various designs, canister dimensions approx. 245x290x460 mm, in stock on pallet Auction-ID: A1-45003-88

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece