cages used for sale

Construction site price: approx. 108 pieces of pallet cages, flap on the short side - used - : Price per piece ex site: 59.- € (net)! Primarily complete sale – price for complete acceptance: 5.000.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Load capacities: unknown Basic dimensions: approx. 1.20m x 0.80m Colour: primary blue Condition: used, partly the grilles slightly dented Available: now Location: Karben

Description: About 52 pieces in total , different designs , without contents Approx. Onsite Dimension. (l x w x h): 6,000 x 1,200 x 4,000 mm, weight approx.: 2,000 kg

Description: quantity: 5 pieces Approx. Onsite Dimension. (l x w x h): 2,400 x 800 x 2,500 mm, weight approx.: 250 kg

Wirotech tube mill 32x2mm Make: Wirotech Year: 2011 Production material: Hot rolled steel, Cold rolled steel, Pickled steel, Galvanized steel – Min./Max. ø tube: 14 – 32 mm. – Min./Max. Thickness: 0,7/ 2,0 mm. – Min./Max. width tape: 43 / 101 mm. – Max. speed of line: 60 meters per minute Pipes that can be produced: – Tubes (mm): 14; 16; 18; 20; 22; 25; 26,9; 28; 32 – Square (mm): 15×15; 16×16; 18×18; 20×20; 25×25 – Rectangle (mm): 20×10; 25×15; 30×10; 30×15; 30×18; 30×20; – Other (mm): eliptic 44×18; eliptic 30×20; semioval 30×15 Line components: 1. Double strip uncoiler Width: 1650 mm Length: 1100 mm Height: 1900 mm Capacity: 2 x 2000 kg Maximum outer diameter of the strip: 1580 mm Manual brake for steel strip rotation Min/max mandrel expansion: 470/540 mm 2. Strip end welder Producer: Kent Hydraulic cutting guilloti ...

Complete IVC ventilated rack from Tecniplast, use for Hamster/mice and rats. Delivery: March 2020 Features : 4 Single sided Sealsafe Next rack for 30 cages, total capacity 120 cages. Wi Flow ventilation unit for all racks Cages included, covers and grids, Sealsafe H-Temp Polysulfone filter cover, Label holder spring loaded horizontal plastic Connection hose Management software: Guardian

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Qty. 1 Second-hand wire cage welding machine – very good condition Mfc.: Züblin Type: ASMS 30 200 Built: 1985 Machine for production of wire cages within the range of diameters between 300-2250 mm. Wire cage dia.: 300 – 2250 mm Dia. of longitudinal wire: 5 – 7 mm Number of longitudinal wires: 12 Diameter of ring wire: 5 – 9 mm Grade of ring wires: 35 – 165 mm Longitudinal wire – speed:0.3-3.0 m/min.

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using  ...

grinding length: . mm grinding width: . mm workpiece weight: . kg grinding wheel dia. (unused wheel): 400 mm slide stroke: Vertikal Z = 200 mm slide stroke: Horizontal X = 950 mm speed: 30 m/min grinding spindle drive: 10 kW working spindle drive: 6,3 kW max. workpiece diameter: 150 mm workpiece width - max.: 32 mm grinding wheel diameter: 400 x 120 x 65 mm grinding wheel turning speeds: 0 - 3000 mm-1 peripheral speed: 63 m/sec work piece spindle speed: 0 - 3000 min-1 electrics - voltage/frequency: 400 / 50 V/Hz Control: Siemens 840 Dsl total power requirement: 130 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 4,7 x 2,45x 2,2 m CNC-controlled plan-side grinder for one-sided grinding of the end faces of ball cages equipped with: - 2 Working/Grinding Stations and with a turning station in the Middle - CNC control Siemens Sinumerik 840 Dsl The data for this ad was crea ...

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Dimension of travelling rack: Length: 530 mm Width: 320 mm Diameter: 200 mm Max. loading capacity: 80 kg Minimum cycle time: 4.5 min. Compressed air from: 5 bar Power of the heating: 30 kW Voltage 50 Hz 3x: 400 Volt Total power required: 44 kW Machine´s weight about: 2700 kg Dimensions: Length: 2735 mm Width: 1870 mm Height: 2532 mm Various accessories: Number of cages: 10 Distilling Systems

Wirehooder ROBINO&GALANDRINO Year: 2001 Speed: 6.000 bph Model: REKORD 6 Direction: Clockwise. 6 heads Suitable for 4-wire cages Long autonomy storage. Safety protections

Can Filling Line Wild Goose 3000 cph for Various Beverages – 2021 Excellent condition can filling line for beer, cider, cocktails, kombucha, wine and other beverages. The line consist of Zomerdink depalletizer with incorporated can rinser, Wild Goose Evolution 5 series filler-seamer block, Inline Filling Systems roll fed labeller for self adhesive labels and date coding, buffer table, semi-automatic Framax carton box erector-sealer and flexible roller conveyor for full carton boxes. Wild Goose patented seaming and filling technology has five filling time adjusted volumetric filling tubes and one head seamer with two seaming rolls. System has air pre-evacuation with CO2 before filling and after mechanical foam removal, full can tops are flushed with CO2 before placing a lids. After seaming, there is an outside can rinsing system with water. Filling process is fully automatic, contro ...

General SKU027E101 LocationBarneveld MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Hammer Mills Hammer millComminuting mill (1x) Rotor sizedia. 260x295mm Fixed hammerscheck With sieve cagecheck Inlet/feeding through twin screw metering screw Motor22,0/30,0 KW, 380/660 Volt, 1470rpm Speed750rpm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace2,0x1,3 M Floor space2,0x1,3 m Total height2,4 M Weight900 KG Extra SpecificationsDosing screw Motor 0.55 kW Gearbox output 5.7 - 34 rpm (manual variator) Dosing screw capacity: maximum 4.5 m3/h Sieve cages: 3 pieces ( 2 x pore size 1.25 mm: 1 x 1.75 mm) Hammer MillsApexMills > Hammer Mi ...

General SKU220T190 LocationBarneveld MakeAZO TypeDA 360 No.1341030-02 Year of construction2017 Main Features MaterialStainless steel Motor0.75 KW Specified Features - Rotating sieve Rotating sievecheck Sieve sizesdia. 100x440 mm Screw sizes1100 mm Inlet300 mm Outlet150 mm With inspection hatchcheck MotorDosing screw: 0.75 kW 220-240/380-415 Volt: Rotor: 0.75 kW 3x400 Volt SpeedDosing screw: 169 rpm: Rotor: 1400 rpm Air purged glandscheck With sieve cagecheck Sieve perforation3x3 mm - 14x14 mm MaterialStainless steel Information Mounted on stainl. st. framecheck With switchcheck Weight500 kg CEcheck Floor space1,3x1,8 m Total height2,6 m Extra Specifications with Mettler Toledo Safeline metal detector with 7 different sieve cages :Rotating sievesAZOSieves > Rotating sievesBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At ...

Processing both PVC dry blend / PVC pellets ‑ Special design extruders for a perfect PVC melting and uniform plasticization ‑ Specific rotating dies for an even material flow and thickness distribution​ ‑ Automatic calibration cages and collapsing boards ‑ Fully automatic winding stations ‑ Water cooling circuit on specifics and key points of the lines ‑ Easy machine operation by LCD touch screens ‑ High level of automation and process optimization solutions.

Key data: 15 mm, 14000 mm, 120 m/min

One used WAFIOS stretching line The cold stretching and straightening line WAFIOS is the perfect line to produce cold stretched steel ribbed wire bars, to be used in products as reinforcing welded mesh, stirrups, cages and lattice girders for the civil and industrial construction, foundations and precast industry. Cold stretching and straightening line combine the cold stretching process of the wire rod with the wire straightening and cutting of the cold stretched reinforced wire bars to the desired length. The shape and engineering details of the line allow to produce high-quality cold stretched steel bars with excellent straightness. The final product can feed any type of welding reinforcing mesh machine or cut and bend equipment.

Description: SN 80-06-137477 model RI - OF/CNC type M 2-03-21 outer diameter 50 - 90 mm x-axis 145 mm z-axis 250 mm grinding wheel bore 12 peripheral speed max. 60 m/sec workpiece thickness - max. 20 mm total power requirement 20.00 kW Description: Cylindrical grinding machine for internal machining of intermediate rings. With Meccanodora RI-0G/CNC cage grinding machines with full enclosure the inside diameters of ball cages can be ground with high precision single-spindle grinding. The automatic loading/unloading via the integrated loader/unloader ensures maximum efficiency. System interlinked with Meccanodora 1309/CNC external cylindrical grinding machine. min./max. hole to grind: 45 - 85 mm, control: SIN 840D, total power requirement: 20 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,500 x 3,200 mm