cable used for sale

Double-ended electric chain hoist make STAHL type R 12Fabr. -No: 3418474 year of construction 1969Last strands: 2Payload: 1250 kgMain lifting speed: 8 m / minPower 380 V: 1.22 kWWeight approx. 45 kgWith- chain memory- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric winch make PFAFF type BetaMasch. -No: 5/96741800042 Year 1998 Art. -No: FU11402074Capacity 1st positionRope diameter: 8.0 mmRope length: 86.3 mRope speed min.: 1,8 m / min.Rope speed max: 18.2 m / min.Breaking force: 40.5 knTensile load 1. Position: 500 kgTensile load upper layer: 420 kgDrive power: 0.94 kWWeight approx.:80 kgWith- Control cabinet- built on palletused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Power cord -VDE 0276 type: NYY-J 1x16 RE 1 kV -Length: approx. 500 m -Dimensions roll: Ø 600/420 mm -Weight: 122 kg

Spur chain pulley make PFAFF type EcolineArt. -No: 0867005 Test. -No: 03727 Year 1999Lifting load: 2.0 tChain strand: 1Lifting height: 3.0 mHand chain pulling force at full load: 38 kgWeight approx: 26 kgOutside dimensions approx: 185 x 233 x 400 mmWith- short height of construction- Load pressure brakeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NMachine -No: 730966, built in 1970Capacity: 500 kgLifting height: 3 mSpeed: 10 m / min.With- 1-levelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5697825Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make STAHL type R 6/600Masch. -No: 3544260 Year 1971Load capacity: 600 kgLifting height: 3.0 mPower: 0.44 kWWith- fine lift- Roller chassis- chain memoryused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr. -No: 1471196 built in 1970Capacity: 250 kgLifting height: 3.0 mLifting speed: 8.0 / 4.0 m / min.Fine lifting speed: 2.0 / 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-strandedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Helical flanged train Fabr. CLOUD TYPE TRALIFTFabr. -No: 107681 Year 1995Load capacity: 1.0 tChain length: 23 mLifting height: 22 mused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NFabr. -No: 1730966 built in 1970Technical specifications:Load capacity: 500 kgLifting height: 3000 mmMain lifting speed: 10 m / min.With- chain case- single fall 500 kg- control cables- Manual landing gearused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFManufacture -No: 5550183Technical specifications:Load capacity: 125 kgChain Length: 3.0mLifting speed: 8.0 m/min.Fine lifting speed: 2.0 m/min.With- Chain hoist manually 1-strand- control cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make ABUS type GM 3 500.6-111Fabr.-No: D665223/074 year of manufacture 1990Technical specifications:Load capacity: 500 kgLifting Height: 3.0mLifting speed: 6.0 m/min.Precision stroke: 1.5 m/min.Motor power: 0.11 / 0.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

-Prefab. wiring system MWM 12323818 & 12323819 - Suitable for several motors - Please note! Price per piece! -12323818 ; 1232-3818 ; 1232 3818 - Predecessors: 12479560 ; 1247-9560 ; 1247 9560 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of s ...

Compact but powerful machine for processing old cables up to approx. 25 mm in diameter. The nominal output of the system is 120 kg/hour when using a 4.0 mm perforated screen. By using a pre-shredder, the performance can be significantly increased, then stronger cables are also possible. The machine has been checked and modified in our workshop. - new dividing table - new set of knives - new sieves - new seals - Connection for refrigeration unit - Connection for feed and conveyor belt On request, we can supply additional accessories for the machine, such as: - Pre-shredder -Magnetic drum - Dosing accumulator - Refrigeration unit - Dust filter - Screening drum - Bigbag stand with air conveyance for plastic granules

Connecting cables, control cables, interface cables HEIDENHAIN 26200453 Length: 2 m used ! Dimensions: 240 x 240 x 30 mm

Resolverkabel FESTO KRES-BSM-x 165645 Length(x): 10 m unused ! Dimensions: 430 x 430 x 60 mm

Motorkabel FESTO KMTR-BSM-50/63/80-x 165640 Length(x): 10 m unused ! Dimensions: 430 x 430 x 60 mm

AS-I branch line in set WIELAND 83.209.2203.0 Length: 400 mm stub set consists of 11 lines ! unused ! Dimensions: 240 x 140 x 50 mm

Connecting cables, control cables, interface cables HEIDENHAIN 26200451 Length: 1 m used ! Dimensions: 200 x 200 x 30 mm

Lug set PAGUS Connecting bolts: Ø M 6 Nominal cross-section : 16 mm² Connection bolt: Ø M 8 Nominal cross-section : 16, 2 5 mm² Connection bolt: Ø M 10 Nominal cross-section : 70, 95, 150, 240 mm² Connection bolt: Ø M 12 Nominal cross-section : 10, 12, 16, 50, 70, 95, 240 mm² press connectors Nominal cross-section : 150 mm² weight approx. 9.5 kg unused ! Dimensions (packaging): 153 x 73 x 62 mm

Datenkabel ALLEN BRADLEY 1202-H30 Length: 3.0 m New ! Dimensions: 160 x 60 x 40 mm

Datenkabel SIEMENS 6FC9340-8WB Length: 4.5 m used, tested ! Dimensions ( packaging ): 200 x 200 x 50 mm

Interface cables, monitor cables SIEMENS SINUMERIK 800 6FC9344-4NZ01 489 524 Length: 8.0 m New ! Dimensions ( packaging ): 390 x 350 x 55 mm

Interface cables, control cables SIEMENS SINUMERIK 800 6FC9344-1FC-Z 421 587 WKF-ID.Nr.: 64420591 length: 10,0 m New ! Dimensions ( packaging ): 390 x 350 x 55 mm

Interface cables, control cables SIEMENS SINUMERIK 800 6FC9340-8RB WKF-ID.Nr.: 64420125 length: 5.0 m 12-pin New ! Dimensions ( packaging ): 320 x 270 x 50 mm

Data cables, connection cables FANUC A660-4003-T502 Number of cores: 17 Length: approx. 0.7 m New ! Dimensions: 200 x 65 x 20 mm

Interface cables, control cables SIEMENS SINUMERIK SIMODRIVE SIROTEC 64900325 Length: 10.0 m used, tested ! Dimensions ( packaging ): 300 x 300 x 60 mm

Interface cables, control cables PAGUS CL2 75C CL2 75C 28 AWG OR AWM 20266 Core count: 2x 25 cores Length: 3.0 m New ! Dimensions ( packaging ): 250 x 250 x 40 mm

Control cables, tool interface cables, interface cables BOC EDWARDS D372-07-593 Length: 5 m New ! Dimensions: 200 x 200 x 40 mm

Interface cables, control cables SIEMENS SINUMERIK 800 6FC9344-4HZ 489 524 WKF-ID.Nr.: 64900682 Length: 8.0 m RS 232 C Kabel New ! Dimensions ( packaging ): 390 x 350 x 55 mm

Interface cables, control cables SIEMENS SINUMERIK 800 6FC9340-8WC 670 26 152 WKF-ID.Nr.: 64900682 Length: 10.0 m RS 232 C Kabel New ! Dimensions ( packaging ): 390 x 350 x 55 mm

Connecting cables, electrical cables, control cables KET, KARTOFFEL-ERNTE-TECNIK Weimar ROH 4005 Length: 3.5 m Diameter ( protective armor ): Ø 10 mm diameter ( housing bushing ): Ø 12 mm 3-wire, one-sided plug New ! Dimensions ( packaging ): 210 x 210 x 40 mm

Test device for extension cables -Socket tester -Test device for: extension cables, table sockets -Weight: 30 kg

Control cables, adapter cables, interface cables AMT, ALFING MONTAGETECHNIK GmbH 7016704 Length: approx. 3.0 m 25-pin Manufacturer: ERNST+ENGBRING used, tested ! Dimensions ( packaging ): 450 x 400 x 50 mm

Control cables, adapter cables, interface cables AMT, ALFING MONTAGETECHNIK GmbH 7016700 Length: approx. 4.0 m 23-pin Manufacturer: ERNST+ENGBRING used, tested ! Dimensions ( packaging ): 450 x 400 x 50 mm

Control cables, adapter cables, interface cables AMT, ALFING MONTAGETECHNIK GmbH 7017129 Length: approx. 4.0 m 25-pin Manufacturer: ERNST+ENGBRING used, tested ! Dimensions ( packaging ): 470 x 400 x 50 mm

Thermo-Ausgleichsleitung KWO, KABELWERK OBERSPREE, WILHELM UHLIG KG TGsUB 2x1 TGL24451 KWA-S 5055 SoPt-SoPtRh Length: approx. 20 m Other lengths on request ! New ! Dimensions ( packaging ): 180 x 180 x 60 mm

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

Winch rope, crane rope, hoist rope, wire rope, steel rope -Wire rope: Ø 10 mm -Length: 4 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 1.45 kg

Electronics cables, extension cables, electronics cables -Manufacturer: Helukabel -Type: TRONIC-CY 4X0.25 QMM -Length: 1030 m -Number: 4x wires á 0.25 mm² -Price: complete -Dimensions: 495/495/H320 mm -Weight: 40 kg

Antenna cables, extension cables -Manufacturer: Bad Blankenburg -Type: AZ118LL -Length: 4 m -Quantity: 39x cables available -Price: per piece -Minimum order: 3 pieces -Weight: 0.18 kg/piece

End terminal for flat cables, 21 pieces VAHLE EST 1 F/150 310 840 for track S1 ( 30 x 32 mm ) Terminal opening: max. 65 x 37 mm Material: galvanized steel Other quantities on request ! New ! dimensions ( single end terminal ): 100 x 98 x 75 mm Dimensions ( packaging ): 400 x 300 x 150 mm

ID2805 Weserhütte W180 year of construction 1979 55 t approx. 22 m boom, Deutz engine, with fairlead, with drag bucket approx. 22 m boom, Deutz engine, with Fairlead, with scraper

One hour of operation - for experimental purposes only. Works of course - ideal for installation in air ducts but can also be used as such. However, attention must be paid to personal protection. Original purchase price: 590.24 €

Year of production: 2006 Wire spools supported - 630 steel spool Supported drums with product - max 1250 mm Application: Twisting aluminum and aluminum alloy conductors with a maximum number of wires - 12 pieces and a maximum cross-section of 70 mm2. Possibility of thickening the veins with drawing dies.

recoem GDS-150 Year of construction : 2023 Condition : New Total power : 11 kW Throughput : approx. 150 kg/h Accessories : 2,3,4 hole sieve Dimensions : LxWxH 1615x1315x2110 mm Total weight : 1300 kg A compact recycling plant with 3 rotating 2 fixed knives. The design and precision of the cutter chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, just get in touch.

Description: Composed of: N°4 reels including one reel of total capacity 1025 meters, two reels of total capacity 250 meters and one reel of total capacity 1000 meters. We do not guarantee the completeness of the reels (assumed capacities) Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 600 mm, weight approx.: 50 kg