ca used for sale

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Siemens SPPA - T2000 Automation Cabinet Guidance system and cabinet structure SPPA - T2000 AS 620B R903 Siemens 8 MF Cabinet SPPA FUM R Standard Cabinet 6DP2623-1GG10-0XX0-Z Siemens SPPA - T2000 8 MF Cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross bandage Parts set for earthquake strengthening front and rear Double doors 2 x Partition Transport eyelets Cabinet indicator light Height × width × depth: 2200 × 900 × 400 mm Protection class IEC60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central part subrack: 1 x red. AP FUM-B-BGT : 3 x EU 903 subracks with 2 x Profibus connection IM616 and I&C monitoring with 1 x Fum210 Sys 36 fuse slots Colour: RAL 7032 Assembly designation Fum210/6DP1210-8BC Teleperm XP Binaer Assembly Profibus Connection Interface Module IM616 ...

Areva Teleperm XS Control Cabinet Standard body technology For the construction of Teleperm XS systems, Control cabinets of type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are used. The cabinet is equipped with cable interceptors with umbrella rail. The cabinet is designed for seismic loads. Cable entry and power supply is generally done from below. In the standard cabinet, the subracks are mounted in the middle area. To the left and right of this are areas for mounting cabinet connection elements and transceivers. Terminals are used to connect peripheral cables. Other connection technologies such as Maxi-Termi-Point are also possible. Field cables are to be shielded with wires twisted in pairs. Buses are implemented inside a cabinet via conventional cables, outside the cabinet via fiber optics. Teleperm XS is suitable for systems with surface earth ...

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Hazardous material Cabinet, Safety Cabinet Manufacturer: Düperthal Type: 2.22.925-3 DIN 12925, part 1 Dimensions: width x depth x height (approx. 120 x 60 x 193 cm) 2 door with 3 adjustable shelves without a key automatic closing small Fender Bender All information without guarantee

Item number 90023-0048 Insert Card 177, Input Card Allen Bradley for Tetra Pak e.g. TBA 8 development step 50V and before

L=440 Pull-out dimension:40 FL ø = 120 Hole 8/8

THOFEHRN 3 to Crane Hoist / Wire Rope Hoist Cable winch, incl. control, gearbox + motor, German Crane

Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...

Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT 380.RM -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 20 m -Transport dimensions: 380/150/H400 mm -Weight: 13.8 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: 360/90/H400 mm -Weight: 12.4 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: Ø 420 x 100 mm -Weight: 11.5 kg

Filling line for cans fixed for 330 and 500 ml cans capacity: 6,000 cans/hour for 330 ml cans packaging: 3x4 or 4x6 cans on tray shrinked into foil consisting of: 1. TMG Impianti depalletizer 2. Comac carbonator, year of manufacture: 2007 3. MCD filling and seaming combination, type: 16/4 also manufactured by Comac, year of manufacture: 2007 4. Comac tunnel pasteurizer, year of manufacture: 2007 5. Dimac Star One tray erector, tray packer, and foil wrapping machine The filling line is currently fully assembled and in excellent condition. It is being sold with the associated control equipment and conveyor belts. It can be inspected on request.

Cast Iron Joint Connectors PAGUS

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 74 kg

Power cable, flat cable, crane cable, rubber hose cable -Power cable: Flat cable, crane cable, 4-core -Type: 4G 2.5 -Length: 30 m -Transport dimensions: roll Ø 565 x 25 mm -Weight: 8.4 kg

Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used

Measuring and marking plate cast steel-grey cast iron strongly ribbedwith mounting bracket made of steel, 565 mm highYear of construction approx. 1985Length: 1200 mmWidth: 800 mmThickness: 35/150 mmWorking height: 1030 mmWeight approx. 550 kgwith metal basevery good surface; used

Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 100 mmWorking height: 745 mmPlate thickness: 40 mm throughout- stable metal substructureWeight: approx. 800 kgGood condition; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmWidth 1000 mmThickness 230 mmWorking height 970 mmPanel thickness 38 mm throughout- Metal baseWeight 450 kg; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedheavyheavy: straightening plateLength 1600 mmwidth: 1005 mmThickness: 280 mmPlate thickness approx. 85 mm, continuous- Center hole 245 mm, 400/800 mm - Tapped holes M 20, approx. 55 mm deep- Through-holes 27 mmWeight: approx. 2.5 to.Good conditionFormer press table - presumably worked on both sides; used

Without transport cart. Auction-ID: A1-49727-97

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYERfrom a measuring or marking machine with hand-held measuring armMasch. No. 8530979 Year of construction approx. 1989Length 3000 mmWidth 1500 mmThickness 360 mmWorking height 690 mmPanel thickness 70 mm continuous - laterally worked at a 90 angle area 3000 x 360 mm- 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mmSpace requirement L x W x H 3000 x 2000 x 2500

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used

Clamping plate with T-slots made of cast steel-grey cast ironBase plate of radial drilling machineAssembly table, assembly station, base plate for column-slewing craneLength 1850 mmWidth 915 mmPlate thickness 230 mmTable surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm- Milled top side parallel to the underside = clamping surface- Milled underside also the bars lie flat and support- Ideal as a base plateDead weight 1140 kggood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedheavyheavy, straightening plateLength: 1985 mmWidth: 1000 mmThickness with ribs: 220 mmWorking height: 860 mmPanel thickness: approx. 35 mm throughout- 4 pieces height-adjustable feetWeight 1050 kg; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

Lampertz Doku Data Safe PE12 Data Backup Cabinet Lampertz Doku Data Safe Data Backup Cabinet Locker insert Documentary Floppy Tray Shelf with slots Right stop side Fire protection class S 120 P according to EN 1047-1 2 hours of fire safety for documents and paper Resistance grade 1 according to EN 1143-1 Year of Make: 2005 Overall dimension Height: 1976 mm Width with hinge: 955 mm Depth incl. handle: 777mm Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg More items - new and used - can be found in our shop! International shipping costs on request!

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 1600 mmWidth 1000 mmThickness 210 mmPanel thickness approx. 32 mm throughoutTable height / working height 565 mm- very stable steel table substructure (self-made)- plate with substructure can be moved by pallet truckWeight 740 kggood condition; used

Straightening and welding plate Cast steel-Grey cast iron heavily ribbedCast plate, heavy straightening plateLength 1500 mmWidth 1000 mmThickness 100 mmPanel thickness approx. 37 mm continuousTable height 860 mm- Table base made of steel (self-made)Weight 640 kgGood condition; used

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

is semi-motorized Auction-ID: A1-47415-179

Auction-ID: A1-47415-238