150 offers c7

Category: 111: spare parts for machine tools
New in: 2016
Price: 450 €
Location: Land-de DE 33659 Bielefeld, Senner Hellweg 19
Seller: Rein CNC-Service GmbH

Precision ball bearings for ball screws / ball roller spindles, e.g. for Maximart milling machine.

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Lödige, Type DVT-300, No 6791, New 1973, Material Stainless steel, Paddle dryer (1x), Capacity 300 Ltr, Trough sizes dia. 650x1000mm, Inlet dia. 85mm + 2x dia. 50mm, Outlet dia. 100mm, With jacket , Working pressure 7 Bar, With adjustable packing glands , Motor 3,0 KW, 220/380 Volt, Floorspace 2,2x1,0 M, Total height 1,2 MPaddle dryersDryers > Paddle dryers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 1109: electric motors
New in: 1990
Price: 800 €
Location: Land-de DE 33659 Bielefeld, Senner Hellweg 19
Seller: Rein CNC-Service GmbH

Three-phase servo motor with holding brake and position encoder Heidenhain ROD 426/1250 Id. 254204-20, shaft with key slot, shaft diameter 19mm, weight 11.5kg

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make GERICKE, Type GAC 131 5M, No 07207, Material Stainless steel, Metering screw (1X), Screw diameter 50MM, Screw length 100MM, Hopper sizes 660x630x800mm, With motor , Floorspace 1,6x0,9m., Total height 1,3mMetering screwsConveyor screws > Metering screws What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 1109: electric motors
New in: 1990
Price: 1.000 €
Location: Land-de DE 33659 Bielefeld, Senner Hellweg 19
Seller: Rein CNC-Service GmbH

Three-phase servo motor with holding brake and position encoder Heidenhain ROD 426/1250 Id. 254204-20

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Rhewa, Type 82basic T5646 TC7033, Material Mild steel, Capacity 0,4 - 150 KG, Mach.No. 103758, Extra Specifications 230VAC/50|60Hz/15VA Miscellaneous transportMiscellaneous > Miscellaneous transport What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 832: post press: folders
approved
dealer
New in: used
Price: request quote
Location: Land-de DE Bad Harzburg
Seller: AGM Graphische Maschinen

Machine Number: 31629-124036

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Silverson, Type 700 X, No C7LM 201, Material Stainless steel, Continuous reactor In-line high shear mixer (1x), Rotor sizes dia. 250mm, Inlet dia. 100mm, Outlet dia. 100mm, Motor 37 KW, 380 Volt (Ex), Floorspace 1,4x0,7 M, Total height 0,8 M, Weight 720 KGContinuous reactorsMixers > Continuous reactors What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 815: presses: digital
approved
dealer
New in: 2016
Price: request quote
Location: Land-de DE 23769 Fehmarn, Siedendörp 19
Seller: USED Machines

Manufacturer: Canon Model: Image Press c750 Year: 2016 Defects: none for further informations see the photos please Location: Germany Price: on request

Category: 102: lathes
approved
dealer
New in: 2007
Price: request quote
Location: Land-de DE Remscheid
Seller: 5X Machines GmbH

turning diameter: 500 mm turning length: 800 mm control: Siemens Sinumerik rapid traverse: 15/24 mm/min weight of the machine ca.: 7 t dimensions of the machine ca.: 4,2 x 2,0 x 2,1 m CNC Lathe Spinner TC 77 MCY traverse --------------------- X-axis: 350mm Z-axis: 1160/1840 mm spindle -------------------- Max. Speed: 3,200 rpm Spindle nose: A8 Bar opening: 77 mm Torque: 175/206 Nm revolver -------------------- Number of tool stations: 12 Toolholder: VDI50 Number of rotating tools: 12 Speed: 4,000 rpm Torque (60%) 36 Nm All axles scraped Ball screw spindles overhauled and stored again Main spindle gearbox serviced Main spindle re-stored New belts for main spindle New workspace disk Revolver p ...

Category: 815: presses: digital
approved
dealer
New in: 2008
Price: request quote
Location: Land-de DE 23769 Fehmarn, Siedendörp 19
Seller: USED Machines

Infotec (Ricoh) MP C7500 Year: 2008, since 2011 only in use for occasional copies, no more in production External fiery rip Sorter feeder B132 Condition: without defects. Up to the task as a production machine maintenance-maintained. Counter: Total color: 31221 Total b/w: 237466 Availability: now Location: Germany Price: on request

Category: 815: presses: digital
approved
dealer
New in: 2012
Price: request quote
Location: Land-de DE
Seller: OffsetPoint GmbH

Reference Num.: 3274 Brand: Ricoh Type: Linoprint Pro C751 Construction year: 2012 Impressions: 2 mio Available: directly Status: In production Location: Deutschland

Category: 103: milling machines
approved
dealer
New in: 2015
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

2x Milling machine Maka DC7 Built: 2015 & 2017

Category: 815: presses: digital
approved
dealer
New in: 2013
Price: request quote
Location: Land-de DE
Seller: OffsetPoint GmbH

Reference Num.: 3469 Brand: Ricoh Type: Linoprint Pro C751 Construction year: 2013 Impressions: 5 mio Available: directly Status: In production Location: Deutschland Equipment Großraum-Papierkassette Glättungseinheit

Category: 815: presses: digital
New in: 2012
Price: request quote
Location: Land-se SE Ringvägen 8 | SE-573 41 Tranås | Sweden
Seller: Exo Grafiska AB

Konica Minolta BizHub C7000 - Bookletmaker and Trimmer - Fiery ext - Impression Count: only 3 000 000 - Still in production - Complete and in Excellent Condition.

Category: 103: milling machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: DMG MORI Used Machines GmbH

GeneralPrecision centre - Active cooling for electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-50000/1-50000/1-50000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgBall Screw package HSC70 with 5 axisBallscrew package for HSC70 with 5 axis. R ...

Category: 301: injection moulding machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Injection moulding machine Angel VC750/150 In addition to the injection moulding machine, there is also a "Moretto conveyor F5F40" instead of the hopper, and a "MORETTO compressed air dryer D5T W" in the package. The complete system is still under power and can be tested in series operation at any time.

Category: 103: milling machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: DMG MORI Used Machines GmbH

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: CELOS with Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 Floor space/WeightWeight approx.9600 KgDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mHSC70 5-Axis Specifica ...

Category: 102: lathes
New in: 2014
Price: 98.500 €
Location: Land-de DE 86495 Freienried, Birkenfeld Süd 3-5
Seller: HES GmbH

Double spindle with 3 axles, clamping device and portal loading Serial number: HDC70/2-2S-1RS-NCA Emulsion processing with crusher and re-pumping station Built in 2014 Total opening width approx. 2050mm Editing: left: 2 pcs. processing unit Seam SE 70 - HSK 63X 2 pieces three-phase motor with FU for speed adjustment 1 pc. NC slide unit SL 35 with 300mm stroke for Z- direction 1 pc. NC sled unit SL 35 with 250mm stroke for X-direction 1 pc. NC sled unit SL 35 with 200mm stroke for Y-direction right: 1 pcs. 12- tray disc turret SR 12 3 pcs. double spindle unit HSK 63 1 pcs plug-in spindle HSK 63C 1 pc. AC- Main spindle motor 1PH7133 - 12 KW (drives alternatively single sp ...

Category: 103: milling machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: DMG MORI Used Machines GmbH

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationH ...

Category: 815: presses: digital
approved
dealer
New in: 2013
Price: request quote
Location: Land-de DE 23769 Fehmarn, Siedendörp 19
Seller: USED Machines

Digitalprinting System Konica Minolta C7000 in operation: 06/2013 Total count: 7054847 RIP: Windows XP 64bit, Intel Core 2 Quad Q9400 .66GHz, 3.8GB Ram Substrate fan: PF-602 Pressure unit: C7000p (04/2012) Registration Unit: RU-509 (12/2012) without humidifier Finisher: FS-612 (11/2012)

Category: 103: milling machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: DMG MORI Used Machines GmbH

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightWeight approx.12000 KgDimensions (L x W x H)6,65 x 7,6 x 3,18 mSplash guard equipment/cabinSplash g ...

Category: 815: presses: digital
approved
dealer
New in: 2014
Price: request quote
Location: Land-de DE 23769 Fehmarn, Siedendörp 19
Seller: USED Machines

Digitaprinting System Konica Minolta C7000 in operation: 03/2014 Total count: 1648351 RIP: Windows XP 64bit, Intel Core 2 Quad Q9400 2.66GHz, 3.8GB Ram Substrate fan: PF-602 Pressure unit: C7000p (12/2012) Registration Unit: RU-509 (01/2012) with an HM-102 (03/2012) humidifier Finisher: FS-521 (04/2012)

Category: 1108: spare parts
approved
dealer
New in: used
Price: 150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Three-phase motor, electric motor -output 0.25 KW -speed 890 rpm -wave O 14 mm -type B5 -protection IP 54 -weight 11 kg

Category: 815: presses: digital
New in: used
Price: 24.900 €
Location: Land-de DE 50735 Köln, Neusser Landstr. 2
Seller: MVO GmbH

Xerox IGen4-110XXL, refurbished in 2014, 5.6 mio. clicks since then Xerox C570, 2014, 150,000 clicks Xerox 770DCP, 2012, 2.9 mio. clicks Xerox DC7002, 2010/2011, 2.5 mio. clicks Xerox WC7755, 2010/2011, 14,000 clicks EXW Germany Pls contact us for all details

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
New in: 1993
Price: request quote
Location: Land-de DE
Seller: Kuigan UG (haftungsbeschränkt)

NEVER USED Wenger quick cooking Pasta line Manufacturer: Wenger   year: 1993 (approximately) Equipment Description - Year of manufacture - 1993, Never installed in production. - Wenger instant quick cooking Pasta line. Includes the following sections: raw material handling system, mixer, rotary screener, Wenger twin screw cooking extruder , pneumatic conveying system, two stage dryer/cooler. - Equipment partly packed in boxes, containers: CONTAINER ? 1 blower fan. load cells installation. airlock etc. 2 dryer sections. CONTAINER ? 2 ? s8 1 ton of myvaplex 600 ? 4 surge bin and live bin. DDC rear support motor and gearbox. twin screw cooking extruder system based on Wenger TX-138 ( DC motora ...

Category: 1300: other machines and plants
approved
dealer
New in: 1980
Price: request quote
Location: Land-de DE 61381 FRIEDRICHSDORF, AM RINGELSBERG 8
Seller: MET-TECH GMBH

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: ...

Category: 1102: engines
approved
dealer
New in: 2012
Price: request quote
Location: Land-be BE HAMONT BELGIUM / FORT-LAUDERDALE USA
Seller: Hamofa Industrial Engines

Complete NEW Caterpillar C7 engine. NEW delivered with 12 months warranty. Also used available or spare parts on order. ?berholt, gebraucht, Teile, reconditionn?, utilis?, pi?ces, reacondicionado, utiliza, piezas. 110 7C7 7C8 C7B C7C C7D C7P C7S C7T C7X C7Z EPR FML FMM JKL JRA JRT JTF K2A KAL KHX LBM M7A M7G MWS PRY RMF RRH SAP TSK WAX YPG ZTS; Mileage [km]: 6; Power [PS]: 250; Gross weight [kg]: 1150; Engine: CATERPILLAR C7; Engine displacement [cm?]: 7000

Category: 709: other food machines
approved
dealer
New in: 1989
Price: request quote
Location: Land-nl NL 5071 Udenhout, Magazijnweg 3a
Seller: van der Meijden Machines

Gaulin MC7 high pressure homogenizer, single stage. Capacity 4000 l/hr, 200 bar. 30kW electric motor. Piston diameter 43.44mm. very good condition.

Category: 903: machines for soil cultivation, sowing and harvesting
approved
dealer
New in: used
Price: 150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 101: boring mills and machining centers
approved
dealer
New in: 2019
Price: request quote
Location: Land-de DE 86971 Peiting, Zechenstr. 10
Seller: CNC BOTE Johann Demmel

general: Built 2019 Control Fanuc Series 32i Travel X 950 mm Y 460 mm Z 460 mm Workspace: Min. distance spindle nose 120 mm Max distance spindle nose 580 mm Axes: Feed / rapid response 36 m/min Spindle: Max speed 12,000 rpm Tool holder SK40 Tool changer 32-fold Tool magazine: Number of tool stations 32 Max tool length 300 mm Max tool weight 7 kg Dimensions and weight: Dimensions 2,910 mm x 1,700 mm x 2,825 mm Weight approx. 4,100 kg

Category: 706: beverage machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Blindstopfen Code 7 ID5602

Category: 1001: plants for concrete and precast technology
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 48268 Greven, Schillerstr. 14
Seller: michael sapion engineering, consulta & marketing

One used EVG QC7 mesh welding line for the manufacture of special mesh and engineered fabric in any configuration. The welding line is capable of processing cold and hot rolled material Fully automatic pc cotrolled welding line which ensure highest highest production outputs even when producing small batches width: 2,500mm length: 6,000mm Speed: 100 cw/min Line wire spacings: min 50mm and than steplessly programmable Line wire diameter: 5.0mm to 14.0mm Line and cross wire precut and pre straightened

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 401: filling machines
New in: 1998
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

KHS Beer KEG Filling Line 60 KEG / hour This KEG line was delivered by KHS Till in year 1998 and later it was upgraded to Siemens Simatic S-7 PLC control. The line has flash pasteurizer with a 3 m3 buffer tank and semi manual KEG handling hoist. Filling line has 5 stations which has 4 washing stations - one for caustic, one for acid and two for hot water washing , and then one for beer filling with CO2 flushing. The line has two small CIP tanks one for caustic and one for acid. CO2 and low pressure steam have been fed from plant utilities. Equipment is still installed and in fair working condition. Manufacturer: KHS Till GmbH Year: 1998 Capacity: 60 KEG / hour KEG size: 30 and 50  ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 1104: boilers
New in: 2002
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Steam Boiler LOOS UL-S 22 t/h - 13 bar, Natural Gas + Liquid Fuel Complete boiler plant with LOOS Universal UL-S 22000 high capacity steam boiler with exhaust gas economizer and all necessary auxiliaries, delivered in 2002 total operating hours approx 18000 h with gas only. The package includes boiler, feed water pumps, feed water tank and control panel. operated only less than 8000 hours. The equipment is in good condition. The plant is still installed and in operation. Boiler is a three-pass, smoke tube boiler with economizer. The burner is Weishaupt multifuel (natural gas and light fuel oil) burner which is covered with easily removable insulation box. For natural gas feeding the  ...

Category: 1108: spare parts
approved
dealer
New in: used
Price: 280 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 708: refrigeration engineering
New in: 2002
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type They have been operated only 15 000 hours, their cooling capacity is 2800 kW/unit. Refrigerant is R717 (NH3) The delivery includes complete system with compressor package, evaporators, pumps, intermediate NH3 tanks, evaporative condenser and control cabinets. The screw compressor sucks NH3 gas out of the liquid separator and compresses it up to condensation pressure. ...

Category: 1008: dumpers
approved
dealer
New in: 1992
Price: 4.950 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 302: extruders
approved
dealer
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

TECNOVA RECYCLING LINE For PE PP PS ABS PC Constructed in 2010 a.c. motor 225 KW 22000 worked hours Including : Forced feeding unit Extruder with screw diam.130 mm.37 L/D (both new July 2017) N.1 degassing unit Dynisco pressure control Semi-automatic hydraulic screnchanger 220 mm diam. screens type Cafi 130 Hydraulic power station Die face pelletizing unit TTC700 Vibro clasifier Drying centrifuge Control panel for temperature Electric cabinet User’s manual and drawings Average output 450-600 kg/h depending on materials The line is offered reconditioned

Category: 2200: surplus goods
approved
dealer
New in: used
Price: 950 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Complete device, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC Manufacturer SIEMENS Type SIMATIC C7-633 DP 6ES7633-2BF02-0AE3 Dimensions 240/205 / H75 mm -Weight 1.6 kg

Category: 1102: engines
approved
dealer
New in: 2006
Price: 41.500 €
Location: Land-dk DK 37 Rask molle, Mollersmindevej
Seller: Jysk maskin flyt

Jenbacher 320 :Biokraft 2 Engine type Jenbacher 320 Generator type Stamford HC734 Ouverhoul at 40000 Hours Gastype Biogas Year 2006 Runninghours total 63050 Runninghours after last ouverhaul 22100 Serviced regulary Yes Jenbacher Denmark Full service histori Yes Jenbacher Denmark Engine changed Yes At 40000 hours by Jenbacher Austria Engine condition Good Engine still in operation Yes Exhaurst heat exchanger No Radiator No Gasline Yes Silencer No Curkit breaker panel Yes Jenbacher Panelboard Yes Dianediane xt Batteries Yes 2 Charging unit Yes Pumps and pipes Yes Cabels Yes Comunication cabels Dokumentation Yes Ventilation system No Desmantling and loadin ...

Category: 1108: spare parts
approved
dealer
New in: used
Price: 790 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 1102: engines
approved
dealer
New in: 2006
Price: 41.500 €
Location: Land-dk DK 37 Rask molle, Mollersmindevej
Seller: Jysk maskin flyt

Jenbacher 320 :Biokraft 1 Engine type Jenbacher 320 Generator type Stamford HC734 Ouverhoul at 40000 Hours Gastype Biogas Year 2006 Runninghours total 64100 Runninghours after last ouverhaul 23400 Serviced regulary Yes Jenbacher Denmark Full service histori Yes Jenbacher Denmark Engine changed Yes At 40000 hours by Jenbacher Austria Engine condition Good Engine still in operation Yes Exhaurst heat exchanger No Radiator No Gasline Yes Silencer No Curkit breaker panel Yes Jenbacher Panelboard Yes Dianediane xt Batteries Yes 2 Charging unit Yes Pumps and pipes Yes Cabels Yes Comunication cabels Dokumentation Yes Ventilation system No Desmantling and loadi ...

Category: 1108: spare parts
approved
dealer
New in: used
Price: 290 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 301: injection moulding machines
approved
dealer
New in: 2010
Price: request quote
Location: Land-kr KR 440-2 Suwon, 627-8 Pajang-Dong
Seller: TMS CO.,LTD

ENGEL 220 ton injection molding machine -Clamping force : 220 ton -Screw diameter : 50mm -Manufactured year : 2010

Category: 1108: spare parts
approved
dealer
New in: used
Price: 290 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 1019: spare parts
approved
dealer
New in: 2019
Price: 450 €
Location: Land-de DE 27404 Zeven, Nord-West-Ring 8
Seller: MIW Motoren-Instandsetzungs-Werk GmbH

We offer 6xpiston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven

Category: 1108: spare parts
approved
dealer
New in: used
Price: 350 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)