c wrap label used for sale

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Cast iron clamping cube - 5 sides Length 760 mm Height 455 mm Depth 610 mm T-slots numbers 5 T-slots T-slots dimensions 35 x 20 mm With a slight lack at the top side Weight approx 400 kg

Dobot collaborative robot Cobot CR5 - new Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe work on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple Control Methods Low latency and high immunity to interference Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbps Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the press of a button, you can drag and move the robot to teach it a specific way Wide Compatibility Wide compatibility with a wide range of peripheral components Suitable for feeding, assembling, testing, handling, screwing, grinding  ...

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Used Ciat LDC 100V EVO R410A air-cooled chiller on R410A built in 2016. Complete with 1 Copeland ZP120KCE-TFD-455 scroll compressor, condenser with 1 EBM-Papst A8D800-A101-05 fan - 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm and a total airflow of 16.700 m³/h, brazed heat exchanger as evaporator, Wilo MHIL502-E-3-400-50-2 water pump, expansion vessel, control cabinet with a Ciat Connect2 controller and a Schneider Electric VW3A4422. Specifications: Brand: Ciat Type: LDC 100V EVO R410A Product type: Air cooled chiller Capacity kW: 26,3 kW Capacity tons: 7,5 Tons Refrigerant: Freon Refrigerant type: R410A Weight: 388 kg Dimensions: 2050x1060x1500 mm (LxWxH) Compressors type: 1 Copeland ZP120KCE-TFD-455 Display: Ciat Connect2 Number of fans: 1 Fan specifications: 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm Amount in stock: 1

Electrical consumption: 4.0 kW average consumption: 3.5 kW mechanical Speed max. 100 Cartons/minute product power supply: max. 300 blister/min Size: A x B x H Min. 30x15x70 mm Max. 100 x 85 x 150 mm Folding machine Prospectus Guk sizes. 3000 x 1300 x 1660 mm compressed air consumption 4-6 bar without elevation 1-2 Nm3/h with prospectus 5-8 Nm3/h Leatus for prospectus code, case and prospectus presence

Used Carrier 30 RA 080 air cooled chiller on R407C. Complete with 2 Performer SZ185W4PC scroll compressors, condenser with 1 fan - 50 Hz - 1,8/0,3 kW - 945/470 RPM and a total airflow of 20.880 m³/h, braced heat exchanger as evaporator with a water volume of 7,6 liter, water pump, expansion vessel and a control cabinet with a Carrier Pro-Dialog Plus display. Specifications: Brand: Carrier Type: 30 RA 080 Product type: Air cooled chiller Capacity kW: 79,0 kW Capacity tons: 22,5 tons Refrigerant: Freon Refrigerant type: R407C Weight: 631 kg Dimensions: 2100x1100x1330 mm (LxWxH) Compressors: 2 Performer SZ185W4PC Number of fans: 1 Fan specifications: 50 Hz - 1,8/0,3 kW - 945/470 RPM Amount in stock: 1

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court  ...

Immediately available used connecting rod

Can filling line capacity: 20.000 cph can size: 330 ml can type: 211 / 202 other can sizes and can types are possible consisting of: Can depalletizer system König type depal 2000 incl. pallet transport complete reconditioned and fixed for your 330 ml can Can rinser Hysek type Rinsstar 2000 to rins 330 ml cans with filtered water complete reconditioned and fixed for your 330 ml can Can filler and seamer Ortmann + Herbst Hansacan 30 blocked with Ferrum can seamer, can filler with 30 filling, blocked with 5head can seamer, filling temperature: 8-10°C, complete reconditioned and fixed for your 330 ml can Fill high control incl. pushing station Heuft - new machine Can warmer Hermis - new machine to heat up the cans from 8°C to 22° C stainless steel machine with 3 sections Tray erector, tray packer incl. foil shrinking machine Giemme T ...

Key data: 500 mm, 450 mm, 6000 1/min

1 used CNC lathe Make Gildemeister Model CTX 320 V5 Linear Year of manufacture 2004 Control Siemens 840 D ( ShopTurn ) Workspace: Max. circulation diameter over bed 500 mm Circumferential diameter via X-carriage 300 mm Turning length 450 mm Bar passage 60 mm Chuck diameter 170 mm Chuck diameter sub-spindle 165 mm Plane stroke 160 mm Rapid traverse X/Z axis 60/45 m/min Power main drive (100% ED) 16 kW Speed range 6000 rpm Power sub-spindle (100% ED) 7.5 kW Speed range 6000 rpm Number of tool stations 12 Cylindrical shank diameter 30 mm Number of driven tools 12 Drive power (40% ED) 10 kW RPM, max. 5000 min-1 C-axis speed range 0 - 200 min-1 C-axis positioning 0.001 degrees Connected load, total approx. 32 kVA Net weight with chip conveyor approx. 4300 kg Machine with chip conveyor L x W x H 3890 x 1555 x 1890 mm Accessories: Conveyor Pa ...

1x Romfil Crossflow filter, RF12 CSA Vario, built in 2009, 12 new modules and completely overhauled, 120 sqm filter area, capacity for wine up to 15,000 ltr./h under optimal conditions, all seals + air lines + water filter + air filter new, operation via touch panel, integrated feed pump The filter filters fully automatically and also flushes back fully automatically during filtration (time and duration can be set). Furthermore, it also does a water flush fully automatically when a preset minimum quantity falls below a preset level. This means that even a large quantity can be filtered fully automatically – without anyone having to be present. The user only has to add the cleaning agents manually during dry cleaning, there is no automated dosage. The cleaning itself then runs automatically again. In addition to smaller extras, the filter also has a slow-running impeller pump i ...

Compressor Bitzer CSH8571-140Y-40P

continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) grilling time : 1 minute to 60 minutes belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

Cold water kit, Chiller make AIREDALE, 450 KW, Y.O.M. 2004, Freon R 407C. More pictures and information on info@frigocom.at or on 0436641838175.

The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, the ...

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

Laboratory roller for coating laboratory sheets (sample sheets) and plastics

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

Poly-Clip SCH 6210 Width x Depth x Height: 200 x 360 x 900 mm Weight: 10 kg Suitable clip sizes: SCH 6210: S 625/628/632/638 The SCH 6210 single-clip machine is manually operated. Operation is hassle-free and does not require much effort. A hand lever closes the rake flap and sets the clip. The excess intestinal or bag braid can be removed with the integrated cutting blade. The single-clip machine is ideal for sealing cut goods, for dividing portions and for bag sealing. All plastic, fibre, collagen and natural casings from small calibers up to 120 mm are processed. Advantages: - Manually operated - independent of energy sources - Easy to transport - low weight - Repeatable clip pressure adjustment depending on casing type - Integrated cutting blade - Machine made entirely of stainless material - Easy to clean Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 ...

We offer Kaeser compressed air system consisting of 2x adsorption dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter, compressed air management system Sigma, oil-water separation system & control cabinet The compressed air system was used to supply compressed air to a production hall. It was built or extended from 1995-2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the use of the hall. The screw adapter is sold. 1. Screw compressor Kaeser CS 121 75 kW 2, 2x Adsorption Dryer Kaeser DC 75 E Bj. 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Bj 1995 704 kg 4.Piping with ultrafilter SG 0192, 5,Control system: SIGMA Air Manager Basic 6.Oil-water separation system Kaeser 7.Control cabinet standard Rittal PS 4884 Technical data on the components To 1 photo 1-2 Screw compr ...

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Technical details x-travel 600 mm y-travel 560 mm z-travel 510 mm Steuerung Siemens Slim Line Multi Touch Control Main spindle: Max. speed 15,000 rpm/-1 Drive power - main spindle 20 / 14.5 kW Max. torque 121 / 84 Nm Tool holder SK 40 Distance between spindle nose and table 120 - 630 mm Workbench: Table clamping area 900 x 560 mm max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool positions 60 pos. Tool holder SK 40 max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm max. tool length 300 mm max. tool weight 8.0 kg Tool-tool changeover time 2.4 sec Changeover time chip - chip 6.7 sec Feeds: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirements approx. 4.0 x 5.0 x 3.0 m

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

The Bio Mark 7 is the largest commercial cold press juicer we manufacture. It features a quick release hopper using two toggle latches, meaning the hopper chute can be removed in seconds and requires no gasket like other manufacturers. It has a Slim top body that still raises up to allow faster bag cleaning and a press only option. It also is our only juicer with a speed control option on the grinder allowing you to control the speed of the grinder. The Mark 7 is for serious cold press juice production and can easily upscale your juice production with simple controls and exceptional performance. apacity: 12 Kg per batch Output: 70 - 100 Litres per hour ( depending on recipe ) Power: Single Phase 240 Vac 50/60 Hz 3.75Kw 22.9 Amp IP66 Max Press Pressure: 3000 PSI Operating Press Pressure: 2200 PSI Motor Power: 5HP Hydraulic Rams: Two Weight: 400 Kg Dimensions: L: ...

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...

Circle rotary pump Capacity: 2,0 m3/h Capacity: 2,0 m3/h Pressure 0,8 bar Motor: 1,1 kW - With connections: inlet: DN 40 outlet DN 40 - With chassis mobile with 2 steering and 2 fixed wheels - With cable and CE plug 16A Measurements and Weight: Length: 1100 mm Width: 620 mm Height: 1100 mm Comment: the pump is tested, 100% functions guarantee! On request with an additional variable rate variable speed drive. Connections can be changed at extra cost.

horizontal conveyor belt with hydromotor

Optima Checkweigher Model: CC2 Serial: 1000388 Stainless steel checkweigher, weight range 0g -750g, 0.1g, total length 800mm, weigh platform 150mm x 120mm, pneumatic blow reject, 1Ph

Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc

CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Regulation: - 32 bit controller - LCD control panel - Digital display of target and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test object control Technical performance data Temperature checks: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K temporally Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat irradiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, a ...

Make : ILPRA Model : FS 4000 Capacity : 4000 Volume of Filling : 100-500gr Pockets : 2x8 Cup Dispensing Filling Aluminium Lid Application Lid Sealing Fully Fuctional May be used for jam filling, but can work with other products like yoghurt or cream cheese. Electric power supply: 400V 50Hz 3N

DATA ON THE MACHINE Machine type: Handwheel Manufacturer: MAHO Model: CNC Condition: ready for use (used) Price 400 â?¬ FP net plus VAT Location Warstein , Germany Reference M-MAH-1119-6 Description We offer you a used handwheel from the manufacturer MAHO Nterv suitable for e.g. MAHO MH700 Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

PVS 150 V Multicut with 15 to 22 KW with combinable cutting systems Rotor/ stator non-contact Hole disc with knife head or rotor/stator with perforated disc system 2 cutting stages

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

Spaen centrifuge in the run-through process CEPA Padberg Y. 1986 1400 rpm Diameter 500 mm Spaene throughput up to 600 L/per hr = approx. 1.2 to. / Hour incl Spaene supply Plant Tuev prued until 2016 (last check see sticker) In the fully automatic AS series, short rieselfaehige Spaene are continuously and equally fed from above via a foerderer of the centrifuge. Entoelung short, rieselfaehiger spaene, aluminium and steel Continuously Up to 600 l/h

Qty. 1 Second-hand full automatic mat and shine anodising coating line Mfc.: CISART Built: 2013 Stopped: Capacity: 1,800,000 pieces of profiles per annum Maximum Part Length: 3 m Requested area: approx. 630 m² Operators: 4 - 6 Estimated Full Power Consumption: 960 kW +/- 10% Voltage: 415 V, 50 Hz, 3 ph. Heat Consumption Max.: 500,000 Kcal/H +/- 10 % Water Consumption: 3 m³/h Water Consumption (TAP) by Customer: 10 m³/h Air Consumption: 1 m³/h Heating System: Electricity & Gas Acid Recovery System: 3 kg/h CHILLER 400,000 + 160,000 kCal/hr 40 °C Max. Ext. Temp. Water cooling range: 9-14 °C 190 + 80 kW Dozing System Quantity: 8 Eye & Body Wash Quantity: 2 Qty. 49 Tanks, 3.5 x 1.1 x 3.0 m – L x W x H Weight: 10 ton each Tank made of 2,5 mm thick AISI304 sheets

Machine No.: 2009.14 Power: 5.5 kW Pharmaceutical version as good as new Stainless steel with funnel (approx. 60 l) Switchgear EEx various spare parts, new cross-toothed grinding set LWH: 800 x 700 x 1400 mm Weight: approx. 120 kg