bystronic laser cutting used for sale

: neu : Bulgarien : 96240 € : 1818.94 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 MK : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low vol ...

: neu : Bulgarien : 89440 € : 1690.42 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 3 : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volta ...

: neu : Bulgarien : 56920 € : 1075.79 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turnin ...

: neu : Bulgarien : 64180 € : 1213 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 3 : 16 - 63, 63 - 250, 315 - U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 060 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm � ...

: neu : Bulgarien : 126650 € : 2393.69 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turnin ...

AGIE CHARMILLES ROBOFIL 2030 SI ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 560x440 mm; max Werkstück 1130x510x260 mm; Tischbelastung 500 kg; Verfahrwege X 318 mm, Y 218 mm, Z 114 mm; U/V Achsen ±48 mm; Konischschneiden ±30/65°. Technische Daten: Drahtdurchmesser ab 0,1 mm (oberer Wert nicht angegeben); Drahtvorschub bis 15 m/min; max Spulengewicht 16 kg; Abtragsleistung max 300 mm2/min; Dielektrikum 240 L; Leergewicht 4400 kg; Anschluss 3x380 V 50 Hz; Gesamtleistung 12 kVA; Maschinengrösse 3700x2600x2300 mm; Gesamtgewicht ca. 4500 kg. Zubehör: automatische Drahteinfädelung; Aufspannset 3 Stk.; EROWA Palettenwechselsystem 30 Pos.; 3 Werkstückträger. Erreicht enge Toleranzen; typisch für Automotive, Luftfahrt, Uhrenindustrie, Medizintechnik und Werkzeugbau Technische Daten ohne Gewähr

AGIE CHARMILLES ROBOFIL 2020SI ist eine Drahterodiermaschine mit hoher Präzision, ausgelegt für beste Genauigkeit und Zuverlässigkeit. Arbeitsmöglichkeiten: größte Werkstückabmessungen L 900 × B 520 × H 270 mm; max. Werkstückgewicht auf dem Tisch 500 kg; Verfahrswege X 320 mm, Y 220 mm, Z 270 mm; konisches Schneiden ±30°; Drahtdurchmesser ab 0,25 mm. Hauptdaten: Maschinenabmessungen L 3400 × B 2400 × H 2300 mm. Ermöglicht enge Toleranzen; typisch für Automotive, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik Technische Daten ohne Gewähr

FANUC Robocut Alpha 0C ist eine Drahterodiermaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Werkstücke bis L650×B420×H180 mm, Tischbelastung max. 250 kg; Verfahrwege X320 Y220 Z180 mm, U120 V120 mm; Kegelschnitt ±30°; Draht ab 0,1 mm; Spule max. 6 kg. Technische Daten: Eilgang 900 mm/min, Gesamtleistung 11 kVA, Dielektrikum 390 l, Anschluss 3×400 V 50 Hz; Maschinengewicht ~1500 kg; Abmessungen L1800×B1600×H2000 mm. Zubehör: Lampe, RS232-Schnittstelle. Erreicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie und Formenbau. Technische Daten ohne Gewähr

HABEGGER Grignoteuse meuleuse ist eine Nage- und Schermaschine (Nibbling und Shearing), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Arbeitskapazitäten sind in den vorliegenden Informationen nicht enthalten. Technische Daten wie Drehzahlen, Verfahrwege, Leistung oder Abmessungen wurden nicht angegeben. Entwickelt, um enge Toleranzen zu erreichen und für Anwendungen, die präzise Bauteilfertigung erfordern Technische Daten ohne Gewähr

FANUC Robocut C 600 iA ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 600×400 mm; max Werkstück 1050×820×300 mm; Tischlast 1000 kg; Verfahrwege X600 Y400 Z310 U200 V200; Draht ab 0,1 mm. Anschluss 50 Hz 3x 400 V; Gesamtleistung 11 kVA; Gewicht ~1500 kg; Abmessungen 1800×1600×2000 mm. Zubehör: Lampe, automatische Drahteinfädelung, Flüssigkeitskühlung Daikin, automatische Schiebetür, Glasmassstäbe X,Y, rotierende Spindel Hirschmann H80R.MNXF. Erreicht enge Toleranzen; Branchen: Automobil, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

: neu : Bulgarien : 114970 € : 2172.93 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5. ...

: neu : Bulgarien : 81780 € : 1545.64 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: t ...

A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. ...

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An ARISTO flatbed cutting and routing system with MultiHead IV, HF Routing Device, color camera and ARISTOprojection is offered. Cutting width: 2300mm, static repeatability: +/-0.08mm, max. material clearance thickness: 55mm, drive system: digital AC servo motors, data format: HPGL compatible, interface: RS232C/V.24, transmission speed: 38400baud, vacuum system: adjustable matrix vacuum zones. 2) MultiHead IV type 4021/OT.M.P. IV-1, electrically oscillating tool axis, max. pressure: 180N at 6bar, integrated laser pointer, color camera with AutomaticEye registration system, tool head dimensions W/H/D: 166mm/390mm/330mm, weight: approx. 8.5kg. 3) HF Routing Device for spindles 4040 DC/4040 DC-S, max. speed: 50000rpm/60000rpm, power: max. 800W/1000W, Z-axis stroke: 50mm, collet range: 1.5mm-6.35mm. 4) ARISTOprojection for 1:1 projection of the contours onto the working area. Machine was reg ...

Band Knife Cutting Machine R1150 The KTK PROFI band knife is a high-performance system for precise cutting of various textile elements such as: - Fabrics - Knitwear - coated and impregnated fabrics - Insulation materials - Upholstery foam Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen

- TouchScreen - Air table - Side table with air right / left - RA2 jogger with air and smooth out roller - Baumann Lift - spare knife

- Color display - Program - Air table - Resopal side table left+right - Jogging table with air - Spare knife

Hartmann Automatic Slicer SL-25 - working condition very good,

Manufacturer: Barsanti Type of machine: Tile cutting line - Slab material: Marble and Granite - Slab length max: 3500mm - Slab width max: 2100mm - Slab thickness max: 50mm - Tile size min: 300mm x 300mm - Tile size max: To slab size - Tile thickness max: 50mm - Production capacity: Approx. 1 slab per minute - Cutting method: Cut slabs in one pass or strip by strip - Overall length of line: 36m - Main components and their function - Automatic Slab Loader: loads slabs into the line - Feed conveyor 1: conveys slabs into the line - Pedestrian Bridge 1: walkway across the line - Feed conveyor 2: conveys slabs toward the long cut saw - Long cut belt conveyor: conveys slabs through the long cut process - Long cut bridge saw: 7 blades with electronic positioning, performs the long cut - Side waste breaker: breaks off side waste material - Side waste conveyor: conveys away side waste material - ...

used bread slicer Treif Diskus 400+, Masch.-Nr. 607011.189985.120963, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 HP, cleaned, inspected and tested, works perfectly, weight 195 kg, year of manufacture 2014

AJAN SHP 130 plasma cutting machine was built in 2021 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine has been regularly serviced. In 2024, the SCT260 torch was replaced with a new one. The AJAN SHP 130 is designed for the precision cutting of sheet metal with a maximum thickness of 30 mm. Plasma cutting is performed using a reliable torch in accordance with a pre-programmed cutting programme. The plasma source ensures high energy efficiency and stable operating parameters, even during intensive use. The work table with a length of 3000 mm and a width of 2000 mm is equipped with an integrated fume extraction system, which effectively removes contaminants generated during cutting, improving operator comfort and safety. The plasma cutting machine is controlled by an advanced CNC controller with an intuitive interface. The machine operator also has at the dispo ...

Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Hersteller: Trumpf Typ: TruMatic 6000 FMC -1300 Baujahr: 2006 Zustand: gebraucht, sehr gut. regelmässig von Trumpf gewartet. Maschine ist unter Strom und im Einsatz. Betriebsstunden NC-Stunden: 70.305h Strahl-Ein Stunden: 17.217h Steurung: Siemens Sinumerik 840 D Stanzkraft: 220KN Laserleistung: 2700W Arbeitsbereich Laserbetrieb ca.: 2585 x 1280 mm Arbeitsbereich Stanzbetrieb ca.: 2585 x 1370 mm Max. Blechdicke ca.: 8 mm Auflagetische Bürstentische CE-Kennzeichnung Standardausstattung: Stabiler, gut zugänglicher C-Rahmen Koordinatenfürhung mit integriertem Linearmagazin, 21 Plätze für Werkzeuge und Spannpratzen 1 Spannpratzen Wartungsfreie Drehstrom Servomotoren Teilerutsche 500 x 500 mm (sensorüberwacht) HI-LAS Hochdruckschneiden TRUMPF Laser: CO2-Laser TLF 2700 Hochfrequenzanregung Lasersteuerung T ...

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,8 m Training Machine - First-Hand Features: 3-axis digital display 3-jaw chuck 4-jaw chuck Collet chuck Active chuck guard Cover for lead and feed spindles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 250 ,MAX MODUL 5

cut-off saw: 3 KW Spindle diameter: 50 mm Spindle length: 300 mm Number of tools: variabel St. Control: CNC Dimensions (L/W/H): 2500x1700x2100 mm weight: 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ---------------------------------------------- Crosscut Saw --------- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed 2800 rpm Saw Blade Diameter 400 mm Automatic Brake with Speed Monitoring Stepless Saw Positioning with Siko Display Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----------------------------------- Power 2 x 7.5 KW Speed 4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm Both slotting spindles can be positioned via ball screw Freely programmable 19 programs, display with function keys  ...

turning diameter: 1.300 mm turning length: 3.000 mm control: FAGOR 8055 TC/C swing diameter over slide transversal: 940 mm feeds: X /Z 8.000 mm/min c-axis: Inkl. speeds:: 0 - 800 u/min transmission ratio: 4 spindle nose: DIN-55026-B11 : 46 kw spindle passage: 104 mm max. workpiece weight between centres: 13.000 kg chip conveyor: Inkl. total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7.925 x 2980 x 2585 m Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tool power 5.5 kW Tailstock Tailstock quill diameter 180 mm Tailstock quill stroke 300 mm Additional equipment 3-jaw universal chuck Ø 900 mm 3-point steady rest Ø 750 mm 3-point steady rest Ø 400 mm 2 axial driven tool holders 1 radial driven tool holder 20 VDI 50 tool holders Air-conditioning unit for electrical cabinet Portable handwheel High-pressure coolant  ...

Wire EDM Machine Charmilles FI 240 SP BJ 2008

AJAN SHP 130 plasma cutting machine was built in 2017 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine has been used regularly and has a new plasma torch. The AJAN SHP 130 is used for precision cutting of sheet metal in both unit and series production. Cutting is performed automatically on a 3000 x 2000 mm work table, according to a previously prepared program. The stable plasma arc, generated by a high-performance PG 130 A source, ensures efficient cutting and maintains optimal operating parameters even during intensive use. Contaminants generated during machining are effectively removed by an extraction system, which increases operator safety and comfort. All this is complemented by an intuitive CNC controller, which facilitates the preparation of cutting programmes and the operation of the machine. This makes the AJAN SHP plasma cutting machine an excellent s ...

ZBUS YUN 3000-2 plasma-gas cutting machine was built in 2001 in Poland by Zakład Budowy Urządzeń Spawalniczych ZBUS Sp. z o.o. The machine is designed for the precise cutting of large-sized sheet metals with a maximum length of 12 metres and a thickness of 150 mm. The process is performed using two oxy-fuel torches and a plasma torch. The use of both cutting methods enables the flexible adaptation of the machine to current production requirements. As a result, the ZBUS YUN 3000-2 is ideal for the production of steel components for various industries. The YUN 3000-2 plasma-gas cutting machine is distinguished by its stable, open design, which ensures easy access to the work space from all sides. The plasma torch is mounted in an IHT MSX750ARC support, responsible for its precise guidance and automatic position adjustment relative to the workpiece. The plasma arc is generated by a ef ...

CNC Portal Flame Cutting Machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of Make: 2021 CNC Control: Global Control Track width: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel burners type ALFA MS 4452/250 Cutting thickness: max. 150mm Bevel cutting possible Automatic gas adjustment (OmniFlow) for cutting oxygen (max. 15bar) Extraction system: Keller dry separator type Vario 2 Software: OmniWin2021

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2 mm

Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Strip width... 650 mm Band thickness 0.2-3.0 mm Coil weight.. 5 tons. Coil I Diam. . 400/500/600 mm Coil A Dia. 1,500 mm Yield strength... 700 N/mm2 Strip width.. 10 - 250 mm Speed 150 m/min. Working direction.. right/ left Facility consists of: -Decoiler -Belt removal wedge -Scissor breasts 2 pcs. -Scrap wrapper -Band brake -Brake rollers 2 pcs. -Reel -Separation arm -2 control panels -Electrical control cabinets -Central hydraulics -Tools Plant dismantled in workshop

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

turning diameter: 420 mm turning length: 3.123 mm control: MORI SEIKI MSX-850III turning dia. over bed: 995 mm swing diameter over slide transversal: 825 mm dist. between centers: 3.200 mm x-travel: 280 mm z-travel: 3.170 mm feeds: X.Z 30.000 mm/min spindle nose: JIS A2-8 turning speeds: 3.000 U/min spindle passage: 105 mm forward bearing diameter: 160 mm spindle drive: 28 kW Torque: 3.365 Nm turret head: pos. 12 tail stock: weg tailstock quill diameter: 150 mm quill stroke: 150 mm tailstock taper MT: MK 5 total power requirement: 54 kVA weight of the machine ca.: 13,5 t dimensions of the machine ca.: 8.147 x 2.58 x 2.390 mm Equipment - Hydraulic 3-jaw chuck Ø 400 mm - Chuck type SCHUNK THW 400-120 - Quick jaw change system for chuck - Hydraulic steady rest SHW type SLU-3.2-ZS - Steady rest capacity 50–200 mm - CNC longitudinal movement of steady rest (A-axis) - Automatic tool me ...

turning diameter: 255 mm turning length: 500 mm control: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kW rapid traverse Z-axis: 20 m/min rapid motion - y-axis: 12 m/min rapid traverse X-axis: 16 m/min rapid traverse X-axis: 16 m/min spindle nose: A2-8/A2-6 bar material dia.: 66 mm centre distance: 639 mm Chip coveyor: swing dia.: 270 mm total power requirement: 65 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m -Two 12-station turrets (24 positions total), each with 12 driven tool stations -Y-axes on both turrets -Sub-spindle travel: 635 mm -Sub-spindle rapid traverse: 30 m/min -Travel – X (Turrets 1 & 2): 190 mm -Travel – Y (Turrets 1 & 2): ±40 mm -Travel – Z (Turrets 1 & 2): 500 mm -Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm -Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001° -Turret 1 s ...

Manufacturer: PIERCE Model: RUR 2000 Year: 2016 Condition: Used Stock number: 9505 Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 25 mm Plasma Source: Formica 130 Plasma can also be burned using the oxygen-fuel process up to a layer thickness of 100 mm. Equipment: Suction Kompresso Wrykrys Program

This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details.

CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...