bx 24 used for sale

Weight: 0,08 tons Length mm: 1900 Width mm: 550 Height mm: 700 Condition machine : Moderate Photos/film available: Photos available

Inv. Num. : 7488 Type: Aries 245 II Producer: AMADA Generated: Parameters: Compressive force: 200 kN Machine height: 1963 mm Machine length: 3814 mm Machine width: 2560 mm Machine weight: 11600 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 240 mm -Inside diameter: 103 mm -Hole circle: Ø 133 mm -Dimension: Ø 240/H160 mm -Weight: 7.6 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Bearer width: adjustable -Load capacity: kg -Dimensions: see technical drawing in the photos -Dimensions: 240/262/H225 mm -Weight: 12 kg

Control cabinet and distributor construction, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 240 -Number: 9 pieces available -Price: per piece -Dimensions: 200/55/H110 mm -Weight: 0.4 kg/piece

- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Power supply unit, converter, power supply, switching power supply -Phoenix Contact: TRIO-PS/1AC/24DC/10 -Input: 100-240 V -Output: 24 V -Price: per piece -Number: 2 pieces -Dimensions: 160/60/H130 mm -Weight: 1.4 kg

Starter Bosch -Voltage: 24 V -Type plate: 113445 24V E5200 -Tooth: 12 -Price: per piece -Number: 2 pieces -Dimensions: 440/220/H155 mm -Weight: 28 kg/piece

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 248 mm -Transport roller width: 610 mm -Hole: Ø 30 x 60 mm, Ø 25 x 75 mm -Dimensions: Ø 248 x 840 mm -Weight: 27 kg

three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Short taper holder: Short taper 6 Ø 105 -Passage: Ø 77 mm -one set: hard interchangeable jaws -Weight: 28 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: bayonet disc mounting -Outer diameter: Ø 240 mm -Cone size: 6, cone Ø 106, hole circle Ø 133.4 mm -Weight: 7 kg

Baking floor Model Forno 246 Modular deck oven for trays 2 x 40/60 - 1 x 60/80 Program control with night start Stove dimensions inside: 650x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 5.4 kW, 16A-CEE plug Dimensions: 985 x 1275 x 470 mm, WxDxH (floor) New device 24-month warranty on spare parts Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray You can find many more ovens here!

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 700/75/H75 mm -Weight: 4.25 kg/piece

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm -Weight: 29 kg

Key data: 2420 KW, 400 V

MTU 20V4000 and 16V4000 UPS systems with 250 operating hours in mint condition immediately available

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

SPECIFICATIONS: Max. processing dimensions mm: 2400 x 1150 extendable and tiltable, suitable for processing doors Pneumatic operation

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston diameter: 32 mm -piston rod: 20 mm (connection: M12 x1.25 thread) -Air inlet and outlet: adjustable -Price: per piece -Number: 3 pieces -Dimensions: 310/46/H46 mm -Weight: 0.85 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 63 mm -Piston rod: 20 mm (connection: M16 x1.5 thread) -Dimensions: 400/75/H75 mm -Weight: 2.55 kg

Bezel, stick, lynette -max. passage: Ø 240 mm -Tip height: 290 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 760/130/H610 mm -Weight: 125 kg

Video camera -aus: warehouse liquidation -Color camera -Dimensions: Ø 24 x 75 mm -Weight: 120 g

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

Video camera -from: Warehouse clearance -Color camera -Dimensions: Ø 24 x 75 mm -Weight: 100 g

Boiler for spiral mixer W 240 a, Fabr. Diosna

Control: FANUC Series 0i-TC Number of spindles: 1 Equipment: C-axle, gantry loader, tailstock, tool holder

x-travel: 24000 mm y-travel: 3000 mm z-travel: 1250 mm spindle turning speed - stepless: 4000 U/min spindle taper ISO: 50 spindle motor: 37 kW feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 60 Stück control: HEIDENHAIN TNC 426 M total power requirement: - kW weight of the machine ca.: - t - CNC control HEIDENHAIN TNC 426 M - Automatic head 360° x 144 positions. - ISO 50 - Spindle extension L600 - ATC 60 positions - Spindle cooling (internal) 20 bar - Workpiece probe - Chip conveyor - Hydrostatic in x/y/z/a - Rigid tapping - preparation for horizontal Head There are no tables The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used production line for the production of fruit - vegetable products ( jams, mousses, pastes, soups) in glass jars. Capacity 2400 jars/hour. Line composition: 1. vacuum evaporator for jam Spomasz Pleszew, 2. vacuum evaporator for jam Spomasz Pleszew, 3. equipment set for product transport and line cleaning: - Pneumatic diaphragm pump, - Centrifugal pump. 4. buffer conveyor for loading empty jars Marba Sp. z o.o. 5. metallurgical clean jar washer Marba Sp. z o.o. 6. two-piston dosing device Marba Sp. z o.o. 7. twist-off lid remover Marba Sp. z o.o. Lid capper type: Twist off Marba Sp. z o.o. 9. 9. X-RAY Mekitec Sidemeki two-lamp contamination detector, 10. plate conveyors Marba Sp. z o.o. 11. cooling tunnel, type: TC-HRW 5 including HERMIS dehumidification, 12. water cooling tower CWT 5/600 CH Technika Chłodnicza Sp. z o.o 13. jar eliminator, type: ENS, Marba  ...

Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg

Gear motor, electric motor, electric gear motor -Speed: 19.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 35 mm -Protection class: IP 65 -Hole circle: 210 mm -Recess: 180 mm -Dimensions: 550/250 / H265 mm -Weight: 45 kg

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...

Rolling bearings, ball bearings, SKF bearings, SKF, spherical bearings, roller bearings -Type: 24056 CC/ W33 -Lubricating groove -Bore: Ø 280 mm -Outer diameter: 420 mm -Width: 140 mm -Weight: 74 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 420 mm -Piston diameter: 32 mm -Piston rod: 12 mm (connection M 10 x1.25 thread) -Quantity: 4 available -Price: per piece -Weight: 1.8 kg/piece

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm

ZINSER 2425-I plasma cutting machine was built in 2013 in Germany by ZINSER GmbH. The machine, which is designed for precision cutting, marking and bevel cutting of tubes and sheet metal, has AC servo drives with precision planetary gears that guarantee excellent handling characteristics at high speeds and rapid direction changes. For the machining process, plasma or oxy-fuel torches are used, which move along the large work table on two linear guides. A sturdy portal structure with an efficient filtration system further eliminates any contamination, leaving the work area safe and comfortable. All this is complemented by a state-of-the-art CNC control with touchscreen. The ZINSER 2425 plasma cutting machine weighs 1325 kg. Technical parameters of the ZINSER 2425-I plasma cutting machine - CNC controller: ZINSER CNC 5010 - input power: 4000 W - maximum workpiece thickness: 200 mm - ...

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm

RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.

Geared motor Article number: FDU1711-2401486 001 2KJ3501-6EM23-2HB1-Z BAZ29-LE90ZLR4P IP 55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:343r\min 60HZ n2:411r\min 22Kg NEW and fully functional, from stock, see pictures for more details.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 247 mm -Transport roller width: 607 mm -Square mount: 25 x 25 x 30 mm -Dimensions: Ø 247 x 607 mm -Weight: 21 kg

Geared motor Article number: FDU1711-2401485 2KJ3102-1EM23-2HA1-Z ZZ29-LE90ZLR4P IP55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:416r\min 60HZ n2:499r\min 20Kg NEW and fully functional, from stock, see pictures for more details.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 435 mm -Piston diameter: 40 mm -Piston rod: 16 mm (connection M 12 x 1.25 thread) -Number: 2x available -Price: per piece -Weight: 2.6 kg/piece

workbench, work table, assembly bench -Width: 2420 mm -Depth: 795 mm -Height: 850 mm -Workbench: 19 mm thick blockboard -Dimensions: 2760/795/H850 mm -Weight: 118 kg

Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg