button used for sale

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2019 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

Spiral kneader Kemper SPL 75 Bakery dough kneader Kemper SPL 75 with stainless steel kettle and stainless steel spiral for maximum 120 kg dough immediately available in stock for sale. The spiral kneader is slow and fast at 2 speeds. 2 speeds slow and fast 2 timers automatic on and off with plastic flour dust cover Boiler, spiral and guide rod made of stainless steel Push button control Boiler capacity approx. 175 litres Boiler diameter inside 76cm boiler height inside 44cm Boiler right left rotation Hand and automatic switch Machine is rollers with 2 locks Easy operation and cleaning Capacity for a maximum of 120 kg of dough or a maximum of 75 kg of flour -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2018 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 150 mm bore stroke: 120 mm threading: M18 / M22 spindle taper: 3 MK table:: 300 x 270 mm turning speeds: 200 - 4.000 U/min column diameter: 100 mm total power requirement: 0,75 / 1,1 kW weight: 170 kg range L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

HP DesignJet Z6200 CQ109A Specifications: HP Thermal Inkjet Printing Printheads 2 colors per printhead, 2 printheads per color HP Vivera ink system (photo black, matt black, grey, chromatic red, light cyan, magenta, bright magenta, yellow) Speed Pages per minute (Depending on print medium and print mode) CAD: 17 s/page on A1 Graphic: Quick mode: up to 113,6m²/h on white paper (mechanical printing time) Presentation: 3.2s/page on A1, 13.1m²/h on glossy media Maximum resolution 2,400 x 1,200 dpi optimized Memory 160 GB hard drive Standard printer languages: HP-GL2/RTL, CALS/G4 Optional: Adobe PDF, Adobe® PostSscriptt3®, TIFF, JPEG Medium sizes rolls from 610 to 1,066 mm wide Maximum length of roll media 175 m Media types Paper (plain paper, coated and heavy coated paper, photo paper - matt, semi-gloss, glossy), technical papers, foil (transparent, matt), vinyl (pol ...

VM generator set 80 kVA with control cabinet - - - - - Engine: - VM (Italian manufacturer of industrial diesel engines) - 8 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 80 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Switchboard: - Digital control with display - Start button to start - Automatic start function - Motor monitoring - Generator monitoring - - - - - Condition: - The generator set is an emergency system - The device has only run for 1300 hours - Regular maintenance and test runs were made - - - - - Scope of delivery: - VM generator set 80 kVA - with control cabinet - incl. automatic start function - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inq ...

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity.

La San Marco NEW 105 MULTIBOILER 3G portafilter machine espresso machine Touch (6) factory price 11,157 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting, which can be easily adjusted via the touch screen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display provides a range of information that is of great benefit to the operator. The illumination of the workplace with adjustable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Groups: 3  ...

Spiral Kneader Model: SP 200 T Kneading machine with sophisticated and robust technology! Digital easy Touch Control with return button Dough machine with 3 timers 1 mixing gear and 2 forward gears for min/max. 15 - 200 kg dough Flour dust hood with damper Stainless steel boiler and spiral Machine mobile with 4 locks DGUV V3 tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Dimensions: 950 x 1560 x 1600/2200mm, WxDxH Bakery Machine with warranty

Machine Mechanics & electrics completely overhauled & repainted 6 months warranty Properties: + Solid construction + mobile machine, on height-adjustable feet, with fixed boiler + Stainless steel boiler and lifting arm + with flour dust hood, automatic switch-off when lifting + simple and pleasant control via control box + with 2 new DIOSNA timers for 2 speeds + manual operation / automatic operation switchable via push button + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker Specifications: - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Boiler volume: approx. 180 litres - Motor power: 6.9 kW - Power loads: 380V - 3Ph - 50Hz - Fuse: 16A CEE plug - Dimensions (lid closed): 86 x 93 x 112 cm (WxDxH)

Spiral Kneader Model: SP 200 T Kneading machine with sophisticated and robust technology! Digital easy Touch Control with return button Dough machine with 3 timers 1 mixing gear and 2 forward gears for min/max. 15 - 200 kg dough Flour dust hood with damper Stainless steel boiler and spiral Machine mobile with 4 locks DGUV V3 tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Dimensions: 950 x 1560 x 1600/2200mm, WxDxH Used machine cleaned 6 months warranty Visit our great bakery machinery sales!

-Exhibition Machine- State-of-the-art fully hydraulic folding machine. Extensive standard equipment: · hydraulic drive for upper and bending beam · Pointed rail 45 degrees · Rails in upper, lower and bending beam · Oil filling · Control panel with: Digital display of bending angle infinitely variable specification of the bending angle Push button for controlling the upper and bending beam Switch for automatic operation · Control: PLC - Siemens · Foot switch for manual and automatic operation · CE certification · Safety stop at approx. 25 mm upper beam height Hydraulic dynamic crowning Motorized backgauge (1000 mm) Electr./hydr. adjustment of the bending wing, Touch screen: Input for backgauge values and Bending angle of the folding machine Pressure regulation of the upper beam Automatic tool clamping Round bending function with bending Half-shells 180 ...

Quick coupler, mounting frame, connects hydraulic circuits when changing tools from the driver's cab, in the shortest possible time, at the push of a button

sheet width: 1050 mm plate thickness: 3 mm distance between columns: 1100 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

Iveco emergency generator 440 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Iveco (Italy) - Model: Cursor 13 TE3A - 6 cylinders -Diesel - 1500 rpm - Displacement: 12880 cc - - - - - Generator: - Manufacturer: Stamford (England) - 400 / 440 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 395 x 130 cm - Weight: 3700 kg - Tank volume: 230 litres - Sound level: approx. 67 dB (7m) - Fuel consumption: 70.4 l/h (75%) - - - - - Other: - An integrated socket package can be ordered for an extra charge - This probably includes: 1x 400V 32A, 1x 400V 63A, 1x 400V 125A  ...

Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Tapping machine make VEB Hermann Matern type BSG 5Year 1984Tapping capacity8 spindle speeds: 130 - 1200 rpm.Projection: 340 mmQuill stroke: 40 mmTable size: 370 x 500 mmTable with 3 horizontal T-slotsTable movement up / down manually by handColumn diameter: 120 mmelec. Connection: 220/380 V / 50 HzConnected load: 0.42 kWExternal dimensions:Weight: 270 kgWith:- separate control cabinet with swivel control panel- Emergency stop button- Footrest on the bottom plate- V-belt drive- stepless speeds throughxa0xa0 retrofitted frequency inverter ROfre 899202 E, 0.37 kW- Drill chuck FS 6used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

ERMAK HAP 2600 X 80 CNC hydraulic press brake was manufactured in 2005 by the Turkish company ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine characterised by high performance and robustness, performs precision bending of workpieces with a maximum length of 2600 mm and a thickness of 6 mm with a force of 80 tonnes. The machining parameters in the X and R axes are programmed easily and conveniently through the CYBELEC DNC 60 CNC controller located on a mobile arm. The HAP 2600-80 press brake also offers a high level of operator safety, thanks to an emergency button and light curtains made by FIESSLER ELEKTRONIK to prevent unauthorised entry into the machine’s working area. The total weight of the press brake is 5600 kg. Technical specifications of the ERMAK HAP 2600 X 80 CNC press brake - press force: 80 t (800 kN) - feed in X/R axis: 500/160 mm - maximum sheet metal length: ...

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.

Specifications: - Load capacity 2500 kg - Lifting height – chain travel approx. 28 m - Lifting speeds 5.3 m/min - Running chain 11.2 x 34 - Operation of the chain hoist via hand remote button 19.5 m - Drive 400 V / 3.0 kW - Space requirement W 600 x H 500 x D 350 mm - Weight without chain approx. 90 kg - Weight with chain 200 Kg - Transport box W 1150 x H 700 x D 800 mm

Dobot collaborative robot Cobot CR 3 - new Range: 620mm Payload: 3kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing M ...

Dobot collaborative robot Cobot CR 16 - new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing ...

Dobot collaborative robot Cobot CR 16 with SafeSkin- new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grindi ...

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Dobot collaborative robot Cobot CR5 - new Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing Mu ...

Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switching on and off 2 speeds slow and fast with temperature sensor and temperature indicator at the top with 3 stainless steel boilers Vats are locked by means of a hand crank Stainless steel boiler and spiral with flour dust cover angular head Boiler capacity approx. 250 litres Machine was completely overhauled and repainted Electronics new All new warehouses All belts new Friction wheel new Wear parts all new Engine mounts all new Button new Rollis new Hydraulic oil new completely repainted

Tool holder: SK40 Travel X/Y/Z: 310 / 170 / 340 mm Speed range: Horizontal (16) 40 - 2000 1/min Vertical (16) 50 - 2500 1/min Spindle stroke: 60 mm Feeds: 9 - 450 mm/min Table size: 600 x 210 mm Projection: 133 - 320 mm Motor power: 1.6 / 2.9 kW Connection: 400 V, 16 A Weight approx.: 860 kg Dimensions approx.: 1150 x 1150 x 1680 mm Head swivel: 90° / 90° Equipment: - 3-axis digital display, brand: Elesta - Coolant base with pump - Machine lamp - Emergency stop push button - Drilling pinoles - Modernization 2017 - Operating instructions - Electr. Documentation

Dobot collaborative robot Cobot CR10 - new Range: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing  ...

Machine Details Warehouse number 1105-03677 Machine type machining center - Universal HERMLE brand Type C 600 U Year of construction 2003 Control type CNC Control TNC 530 Heidenhain Storage location FRANCE Country of origin Germany Delivery time ON REQUEST Freight base from location Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control TNC 530 Heidenhain Speed range - main spindle 16000 min/-1 Drive power - main spindle 7 / 9 kW Tool holder SK 40 Spindle bearing diameter 70 mm Displacement measuring system direct Resolution 0.001 mm Table clamping surface Ø 280 mm table load 250 kg Swivel range +/- 110 ° rotatable 360000 ° Number of tool positions 30 pos. tool diameter 80 (125) mm Changeover time chip - chip 5.5 sec Rapid traverse ( X / Y / Z ) 35 / 35 / 35 m/min Feed speed 1 - 30,000 mm/min Feed force 6 kN Total power requirement ...

bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1420 mm spindle taper MT: 5 spindle turning speed range: 56 -1450 U/min threading:: 40 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: mm table-size: 635 x 500 x 500 mm column diameter: 320 mm no. of turning speeds: 12 max. dis.center milling spindle to column: 1420 mm range L-W-H: 2060 x 995 x 2760 mm total power requirement: 3,5 kW weight of the machine ca.: 3300 kg Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic ...

bore capacity in steel (diameter): 50 mm arm length: 360 x 1250 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 56-1450 U/min threading:: M 27 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: 890 mm table-size: 635 x 520 x 420 mm column diameter: 300 mm base plate: 1785 x 785 x 190 mm no. of turning speeds: 12 max. distance between table and spindle: 1350 mm total power requirement: 3,5 kW weight of the machine ca.: 2300 kg range L-W-H: 2060 x 995 x 2645 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels  ...

bore capacity in steel (diameter): 80 mm arm length: 500 - 2500 mm workpiece height max.: 2000 mm spindle taper MT: 6 spindle turning speed range: 16 - 1250 U/min threading:: M 65 mm quill stroke: 450 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 2000 mm table-size: 1000 x 800 x 560 mm column diameter: 550 mm base plate: 3520 x 1400 x 320 mm no. of turning speeds: 16 total power requirement: 7,4 kW weight of the machine ca.: 12500 kg dimensions of the machine ca.: 4000 x 1600 x 3850 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system auto ...

bore capacity in steel (diameter): 50 mm arm length: 490 - 2000 mm workpiece height max.: 1900 mm spindle taper MT: 5 spindle turning speed range: 35 - 1890 U/min threading:: M 50 mm quill stroke: 370 mm feed range - spindle: 0,07 - 0,96 mm/U slide adjustment -horizontal: 1510 mm table-size: 1000 x 800 x 500 mm column diameter: 432 mm base plate: 2908 x 1102 x 250 mm no. of turning speeds: 12 total power requirement: 5,5 kW weight of the machine ca.: 6600 kg dimensions of the machine ca.: 3105 x 1400 x 2960 mm Radial drilling machine with hydraulic clamping device. With timer IC which makes it possible to release the arm to move up/down and to stop with one button. The spindle can remain in the same position when changing the tool. Accesories: - Gears in oil bath - Protection against suddenly falling arm - Precision ground gears - Integrated cooling system - automatic tool ejector The  ...

Colloid mill Manufacturer: Probst&Class (PUC) Type: K 150/0 Power: 13 kW with cross-toothed grinding set (good condition) with on-off button & small switchgear standing on feet with hopper (diameter: 660 mm) LBH: 660 x 650 x 1450 mm

Circuit breaker, switch, button -Type: 3NJ6 010 -In 125 A -Weight: 6.2 kg

Circuit breaker, switch, button -Type: TS 25/3 0 Awk -Max. 380 VAC -Price: per package -6x: packages of 2 pieces each -Weight: 0.8 kg

CEMIL TR550A quick miter saw with electronic movable stop, Working direction from left to right, consisting of: - motorized roller conveyor at the entrance, measures 4000x600 mm, with additional manual stop - fast lower miter saw model TR550A with: Double button cutting control blade D=550mm Engine HP 7,5 , volt 380 useful cutting capacity (HxW) mm 30x397 / 100x347 / 165x175 ELAP CM77 control for cutting programming (recently changed keyboard) - motorized roller conveyor at the outlet, length 5400mm, with: electronic stop, useful stroke 5150mm (4900mm with protection mounted at cutting side) .. transverse supports with wheels and automatic pneumatic ups / downs, for side discharge - frame with inclined supports with rollers for unloading cut pieces, measures about 4500x1500mm Total size about 10 x 2.5 meters. Machine according to CE standards

Equipment: - Quick-change gluing part for hot melt adhesive - Autom. Edge magazine with roll plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running repressure rollers - Power Control PC 20+ control - Inlet ruler adjustable - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, drawing blade, program adjustment side button rollers and pneum. 2-point adjustment vertical probe rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Mould milling unit 1 x 0.35 kW - Drawing blade unit for PVC edges - Surface drawing blade glue joint - Cleaning agent specification workpiece - Schwabbelaggregat Specifications Edge thickness 0.4 - 8 mm Roller cutting max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrics 400 V - 3 Ph. - 50 Hz Connection value approx. 10.5 kW Pneumatic connection 6 bar To ...

Bead Mill Manufacturer: Fryma Type: MS-18 Machine No: M16500 Year of construction: 1994 Pressure grinding chamber: max. 2.5 bar Pressure double jacket: max. 2 bar Motor power: 11 kW with switchgear & documentation Grinding space in very good condition with emergency stop button with temperature meter, with pressure gauge LBH: 1100 x 780 x 1350 mm

Progressing cavity pump Manufacturer: Wangen Type: KL 505S-50.4 Item #: 900,588 Year of construction: 1995 Pressure: 4-10 bar very good condition with plug & on-off button LBH: 2800 x 300 x 320 mm

LIQUIDATION of automatic chopper LA MINERVA, model CE 700S, with mouth diameter of 98 mm. and with the following characteristics: Operation with an automatic feeding system by loading hopper and conical spindle feeding the cutting plates. Perfect chopping without rubbing or bruising, characteristics that, together with its great robustness, make it stand out from the rest of the machines on the market. Mouth Ø 98 mm. All the exterior of the machine and the rest of the pieces in contact with the meat, are made of stainless steel AISI-304, complying with all current legislation in this regard (EC Regulations) 7.5 HP (5.5 KW) geared motor Push-button control panel Electrical panel with triangle star start, transformer and protection elements. General power switch. Emergency stop system. Safety device by tilting protection at the outlet of the product with electrical disconnection b ...

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

Dough dividing and warping machine Fortuna Bread roll press TTW Fortuna Automat Gr. 4 E with active cabling circuit Head cleaning with electric motor Partial header newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with return button Connection 400V, 16A-CEE plug Size ca.: 710 x 730 x 1500 mm WxDxH Used machine overhauled with 6 months warranty large selection of Fortuna vending machines

VacuMit EST 20 LC Vacuum Sealer VacuMIT vacuum sealers are not time-controlled vacuum sealers like most commercially available machines. With VacuMIT devices, the perfect vacuum is determined by a process developed and patented by VacuMIT. The Vacu EST 20 is operated via the LC control. LC Control – SemisSens Touch with button control panel incl. the patented vacuum determination easy to clean Ease of use Vacuum chamber and housing completely stainless steel Easily removable welding strip Automatic adjustment of welding intensity Service-friendly design of the machine Soft-air back ventilation Acrylic glass lid for observing the packing process Automatic workflow with lid opening Vacuum determination (no time controls) Chamber size (WxDxH): 410x420x140 mm External dimensions (WxDxH): 445x 580x 390 mm Weight: approx. 70kg Length of welding strips: 405 mm  ...

Dough dividing and warping machine Bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear electric Partial head with stainless steel measuring device NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Protective visor Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis

Switch button -Type: 800MR PA16 -Max.: 300 VAC -Price: per piece -Number: 23x available -Weight: 0.15kg