454 offers button

Category: 409: other packaging machinery
New in: 2018
Price: 8.850 €
Location: Land-at AT 3250 Wieselburg Gumprechtsfelden 4
Seller: Bio-Lutz GmbH

HOT melt adhesive application device ROBATECH has been used only once due to the use of other technology and is therefore as good as new! Article. No. (Robatech) Anz. Position 134591 1 Melter Concept B 5/4, KPC12 Ser.Nr. 1155913-001 501072 1 Connection cable to laser reflective light button Keye 501071 1 Laser Reflective Light Scanner Keyence 132758 1 Voltage selection plug Concept B, 400/230V, 3LN(PE) 142430 1 Order control AS -IK 10/2 installed in new unit 115129 4 W fitting HM 45°, A G1/4" - A G1"4" 136455 1 heating hose NTC/NW 6/ 2.0m/max. 180°C Ser.Nr. 1153576-005 136455 1 heating hose NTC/NW 6/ 2.0m/max. 180°C ser.Nr. 1154356-021 166504 1 Spray head SX 1 ...

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 101: boring mills and machining centers
approved
dealer
New in: 1970
Price: request quote
Location: Land-de DE 50374 Erftstadt
Seller: KW Maschinen GmbH

4 drill heads Drilling capacity max.: 22 mm Spindle speed: 40 - 3,600 rpm Accessories: 3 x modern spindle protection for drilling machines PTR 10/180 with emergency off button and interruption

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 110 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 7 kg Dimensions (l x w x h) approx.: 300 x 400 x 400 mm Description: CPU: Marvell 6282 1,6 Ghz DRAM: 512 MB DDR3 RAM Flash Memory: 16 MB HDD: 2 x 2 TB 3,5â SATA 3GB/s HDDs LAN Port: 1 x Gigabit Rj-45 Ethernet Port LED Indicators: USB, Status, HDD 1, HDD 2, LAN, Power USB: 1 x USB 2.0 Front, 2 x USB 3.0 Back Buttons: System, Power, One touch copy, Reset Abmessungen: H=165,5 x B=85,5 x L=218,4 mm Power-Modes: Sleep 6W, Operationsmode ca. 13-15W Secure Design: K-Lock security slot for theft prevention

Category: 102: lathes
approved
dealer
New in: new
Price: request quote
Location: Land-de DE 87719 Mindelheim
Seller: Weber Werkzeugmaschinen GbR

Tip height: 140 mm Bfulnlhlm0 Tip width: 750 mm Spindle passage: 36 mm Bed width: 205 mm Speeds: (16) 42 - 2000 rpm Engine power: 1.0 / 1.6 kW Riding stock holder: MK 3 Pinole stroke: 90 mm Weight approx.: 580 kg (without accessories) Dimensions, approx.: 1780 x 700 x 1200 mm Colour: green Facilities: - 3-jaw rotary chuck - Machine light - Bed stop - Multifix with 4 inserts - Running grain tip - Emergency-off-stroke button in the working area (new!) - Rotary lining protection with micro-end switch (new!) - 3-axis digital display, professionally mounted (new!)

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 102: lathes
approved
dealer
New in: new
Price: request quote
Location: Land-de DE 87719 Mindelheim
Seller: Weber Werkzeugmaschinen GbR

Tip height: 140 mm Tip width: 750 mm Spindle passage: 36 mm Bed width: 205 mm Speeds: (16) 42 - 2000 rpm Engine power: 1.0 / 1.6 kW Riding stock holder: MK 3 Pinole stroke: 90 mm Weight approx.: 580 kg (without accessories) Dimensions, approx.: 1780 x 700 x 1200 mm Colour: green Facilities: - 3-jaw rotary chuck - Machine light - Bed stop - Multifix with 4 inserts - Running grain tip - Emergency-off-stroke button in the working area (new!) - Rotary lining protection with micro-end switch (new!) - 3-axis digital display, professionally mounted (new!) Very good condition. Workshop tested.

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 110 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 7 kg Dimensions (l x w x h) approx.: 300 x 400 x 400 mm Description: CPU: Marvell 6282 1,6 Ghz DRAM: 512 MB DDR3 RAM Flash Memory: 16 MB HDD: 2 x 2 TB 3,5â SATA 3GB/s HDDs LAN Port: 1 x Gigabit Rj-45 Ethernet Port LED Indicators: USB, Status, HDD 1, HDD 2, LAN, Power USB: 1 x USB 2.0 Front, 2 x USB 3.0 Back Buttons: System, Power, One touch copy, Reset Abmessungen: H=165,5 x B=85,5 x L=218,4 mm Power-Modes: Sleep 6W, Operationsmode ca. 13-15W Secure Design: K-Lock security slot for theft prevention

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE 83558 Maitenbeth, Steinfeldstr. 4
Seller: MST Maschinenservice Thöbert

Hurco VMX 42 with Ultimax 4 control Built 12/2003 Commissioning 06/2004 Switch-on hours main switch a 31868h spindle hours 5240h - spindle was renewed in 2015. Machine ran single-shift at my customer's site and can now be visited under power at 83558 Maitenbeth. (near Munich) Software status 2.37e - Extensive options / See pictures Travel x-y-z. 1067-610-610 Spindle speed 10000 rpm recording SK 40 Internal coolant supply 20 bar Conveyor Tool - Longitude button

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 107: sheet metal working
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Hydr.- Flat profile and bar steel scissors with punching hole Offer number: 19420 Make: PEDDINGHAUS Type: Peddimax 1002 Machine no: 4423754701004 Built: 2001 Technical data: - Flat steel shears - Knife length 400 mm - Stroke number 15 - 20 rpm - Working height 730 mm - cuts - Flat material up to 500 x 18 mm - 400 x 20 mm - 300 x 22 mm - Profile steel scissors - Cutting cross-section max 3500 mm2 - infinitely adjustable stroke 10 - 50 mm - shears with standard knife 90 ° - cuts - round steel 50 + 25 mm - Square steel 50 + 30 mm - Angular steel 150 x 12 mm - cut-out device - possibly square link - Sheets up to 13 mm - Ang ...

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 110 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 7 kg Dimensions (l x w x h) approx.: 300 x 400 x 400 mm Description: CPU: Marvell 6282 1,6 Ghz DRAM: 512 MB DDR3 RAM Flash Memory: 16 MB HDD: 2 x 2 TB 3,5â SATA 3GB/s HDDs LAN Port: 1 x Gigabit Rj-45 Ethernet Port LED Indicators: USB, Status, HDD 1, HDD 2, LAN, Power USB: 1 x USB 2.0 Front, 2 x USB 3.0 Back Buttons: System, Power, One touch copy, Reset Abmessungen: H=165,5 x B=85,5 x L=218,4 mm Power-Modes: Sleep 6W, Operationsmode ca. 13-15W Secure Design: K-Lock security slot for theft prevention

Category: 110: accessories for machine tools
New in: 1996
Price: 350 €
Location: Land-de DE 33659 Bielefeld, Senner Hellweg 19
Seller: Rein CNC-Service GmbH

Handheld control unit handwheel EMERGENCY STOP device, 2 lateral tuning buttons, 3 pushbuttons, handwheel, 2 tap changers, for Fidia, Mazak and NUM1060 controllers.

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 110 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 7 kg Dimensions (l x w x h) approx.: 300 x 400 x 400 mm Description: CPU: Marvell 6282 1,6 Ghz DRAM: 512 MB DDR3 RAM Flash Memory: 16 MB HDD: 2 x 2 TB 3,5â SATA 3GB/s HDDs LAN Port: 1 x Gigabit Rj-45 Ethernet Port LED Indicators: USB, Status, HDD 1, HDD 2, LAN, Power USB: 1 x USB 2.0 Front, 2 x USB 3.0 Back Buttons: System, Power, One touch copy, Reset Abmessungen: H=165,5 x B=85,5 x L=218,4 mm Power-Modes: Sleep 6W, Operationsmode ca. 13-15W Secure Design: K-Lock security slot for theft prevention

Category: 110: accessories for machine tools
New in: 1993
Price: 395 €
Location: Land-de DE 33659 Bielefeld, Senner Hellweg 19
Seller: Rein CNC-Service GmbH

Additional panel Membrane Keyboard Membrane keypad Hein EZ 2300942 with emergency stop button on D&R board B218/01 or Membrane keypad Hein EZ 2300943 with axis direction switches on D&R board B219/01 Price per piece

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 110: accessories for machine tools
New in: 2012
Price: 1.000 €
Location: Land-de DE 33659 Bielefeld, Senner Hellweg 19
Seller: Rein CNC-Service GmbH

12.1" monitor, suitable as a replacement for BE211, BE311, BE411, BE412, BE212, BE132, BE511, BE512, limited for BC110 (has no buttons for the softkeys). For controllers TNC150, TNC151, TNC223, TNC155, TNC355, TNC306, TNC335, TNC351, TNC360, CNC132, CNC232, CNC332, CNC234, TNC2500. Philips CNC3000, CNC5000, VME with EPC-8 module. WxHxD 350 x 275 x 120mm.

Category: 1900: general inventory
approved
dealer
New in: 2019
Price: used machinery auction RESALE 6.400 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1450 kg Dimensions (l x w x h) approx.: 2900 x 1100 x 1580 mm Description: Frequency: 1500 rpm / 50 Hz. Main power (kW/KVA): 88/110. Voltage, phases and wiring 400/230V. 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE R6105AZLD. Features of the 6-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 121 kW. Turbo aspiration. Bore (mm) x Stroke (mm) 105 x 130. Compression ratio 16:1. Consumption (g/kw.h) 225. Displacement 6,75. Water-cooled with radiator. 24V Electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU274C. Insulation type H. Protection type IP23. Control pane ...

Category: 1001: plants for concrete and precast technology
New in: 2010
Price: request quote
Location: Land-de DE 9...., near Fulda, Germany
Seller: EuroConsult Dimitrios Piretzidis

TECHNICAL SPECIFICATIONS Manufacturer: MICHELFELDER ELEKTROTECHNIK Description: Water Dosing System Version: Fully automatic moisture measurement and control system Type: MICOMP easy Year of construction: 2010 SPECIFIC COMMENT - Adjustable for 99 recipes - Partial quantities dosing - Calculated water addition of water depending on w/c factor and concrete consistency - V24-interface for recording all relevant mixture data - Push buttons for manual operation If you are interested, we are pleased to send you a quotation with photos. EuroConsult Dimitrios Piretzidis

Category: 1900: general inventory
approved
dealer
New in: 2019
Price: used machinery auction RESALE 6.400 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1450 kg Dimensions (l x w x h) approx.: 2900 x 1100 x 1580 mm Description: Frequency: 1500 rpm / 50 Hz. Main power (kW/KVA): 88/110. Voltage, phases and wiring 400/230V. 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE R6105AZLD. Features of the 6-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 121 kW. Turbo aspiration. Bore (mm) x Stroke (mm) 105 x 130. Compression ratio 16:1. Consumption (g/kw.h) 225. Displacement 6,75. Water-cooled with radiator. 24V Electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU274C. Insulation type H. Protection type IP23. Control pane ...

Category: 107: sheet metal working
approved
dealer
New in: 2010
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Mot.-Panel Scissors Offer number: 19395 Make: SCHRÃ?DER Type: MSS Machine no: 300188 Built: 2010 Technical data: - maximum working width 2020 mm - maximum material thickness 5 mm - Cutting angle approx. 1.4 ° - manual cutting gap adjustment - Rear stop 5 - 750 mm - 2 front material pads - Angular stop - Pneumatically supported material holder - electr. Foot button - Single stroke - permanent stroke selectable - Cutting edge lighting - Backroom protection with lateral grids and light barrier - Drive 400 V / 7.5 kW - Space requirement approx. W 2750 x H 1500 x D 2460 mm - Weight approx. 3800 kg

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 107: sheet metal working
approved
dealer
New in: 1999
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Universal swivel bending machine Offer number: 19349 Make: KNUTH - OZAMECH Type: AK 20-4 Machine no: 116497 Built: 1999 Technical data: - maximum working width 2040 mm - maximum material thickness at 40 kp / mm2 strength 4 mm - Bending angle adjustment selectable 0 - 155 ° - smallest bending radius 1.25 x sheet thickness - smallest inboard height 6 x sheet thickness - Operation via manual or E. foot buttons - largest opening width / stroke of the upper cheek 200 mm - Height adjustment - the bending cheek 60 mm - the undercheek 60 mm - Upper cheek drive 400 V / 2.2 kW - Bending cheek drive 400 V / 5.5 kW - E. - Foot button - Space requirement app ...

Category: 107: sheet metal working
approved
dealer
New in: 1987
Price: used machinery auction RESALE 7.600 €
Location: Land-de DE Romania, 013722 BUCURESTI
Seller: Surplex GmbH

Weight approx.: 850 kg Dimensions (l x w x h) approx.: 2500 x 2500 x 1500 mm Description: - completely revised RK + PLC automation in 2016 - cutting to length: in automatic mode min. 25 mm max. 10000 mm (maximum cutting to length on request) - ,in manual mode it can be cut to any length (it has an electronic meter for measurement) - ,roll width of 1250 mm width - cutting simultaneously or separated from automatic operation - ,4 cutting blades that are manually adjustable - ,folder for pre-painted sheet metal 1240 mm - control panel with following functions manual / automatic - before manually operated button manually press button back - manually press cutting button panic but ...

Category: 107: sheet metal working
approved
dealer
New in: 2005
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Hydr.- CNC - press brake Offer number: 19417 Make: BOSCHERT Type: SPB 3200 Machine no: B 2426 Built: 2005 Technical data: - Printing capacity 200 t - Working width 3100 mm - Passage between the stands 2550 mm - Stroke 220 mm - Table width 150 mm - Extension 400 mm - Installation height 430 mm - Drive 400 V / 15 kW - Space requirement approx. W 4500 x H 2850 x D 1900 mm - Weight approx. 14000 kg - with: - Swivel arm control panel with CNC control CYBELEC DNC 880 - Bombing - Safety light barrier FISSLER Bj.15 - controlled back stop - with manually sideways movable stop fingers - Pointed tool sets divided - V - Matrices sets ...

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 209: other wood working machines
approved
dealer
New in: used
Price: request quote
Location: Land-it IT 0 Cantu (Como) , Via Susa 7
Seller: VERGA ERCOLE di Roberto Verga & C. S.A.S

SELF-CLEANING SAND PAPERING TABLE OLIMPIA GROSSI MOD.GHIBLI 1500 secondhand table dimensions mm. 1500 x 1000 Self-cleaning system With cartridges and cleaning with compressed air at the push of a button The tilting walls have the task of leaving the table clear. Single-phase 220 V  year of production 2007 CE

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 107: sheet metal working
approved
dealer
New in: 1993
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Hydr. Komb. Flat profile steel shears with cut-out device and punch punch Offer number: 19382 Make: MUBEA Type: MIW 800 Machine number: 0162593314131 Built: 1993 Technical data: - Flat steel shears cut up to 350 x 16 mm - Profile steel shears - cuts - L-steel at 90° to 110 x 10 mm - at 45° to 65 x 8 mm - Bar steel scissors - cuts - Round steel up to 30 mm - Square steel up to 28 mm - cut-out device - for square cut-outs - Punching hole - Punching force 800 KN - Extension 220 mm - punches in steel up to 30 mm in 20 mm - punches in steel up to 50 mm in 12 mm - E - Foot button - Drive 400 V / 4 kW - Space requirement approx. W 7 ...

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 102: lathes
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 87719 Mindelheim, Biberkopfstr. 4
Seller: Weber Werkzeugmaschinen GbR

Tip height: 190 mm Tip width: 950 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: (16) 45 - 2000 rpm Engine power: 7.5 kW Riding stock holder: MK 4 Pinole stroke: 150 mm Weight, approx.: 1650 kg Dimensions, approx.: 2200 x 1070 x 1760 mm Facilities: Fh7d8vt - 3-axis digital display Heidenhain - 3-jaw rotary chuck - collet lining - Quick-change holder System Multifix - Rotary lining protection - 2 emergency-off shock buttons in the working area - Guide and pull spindle cover made of stainless steel - Splash protection back panel - Chip drawer that can be pulled out from the front - Machine light - Bed stop - Coolant device - Drill chuck with cone buckthorn - Quick ...

Category: 206: presses
approved
dealer
New in: 1987
Price: used machinery auction RESALE 1.500 €
Location: Land-de DE Italy, 36066 Sandrigo
Seller: Surplex GmbH

Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 5300 x 1200 x 2350 mm Description:  ,/ - working size 4000 x 1700mm - independent adjustment of vertical and horizontal pressure - manual work cycle - semiautomatic - automatic - timer on control panel - double operating button on control panel - HP 3 hydraulic unit, 380 volts

Category: 102: lathes
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 87719 Mindelheim, Biberkopfstr. 4
Seller: Weber Werkzeugmaschinen GbR

Tip height: 140 mm Tip width: 750 mm Spindle passage: 36 mm Bed width: 205 mm Speeds: (16) 42 - 2000 rpm Engine power: 1.0 / 1.6 kW Riding stock holder: MK 3 Pinole stroke: 90 mm Weight approx.: 580 kg (without accessories) Dimensions, approx.: 1780 x 700 x 1200 mm Colour: green Facilities: - 3-jaw rotary chuck - Machine light - Bed stop - Multifix with 4 inserts - Running grain tip - Emergency-off-stroke button in the working area (new!) - Rotary lining protection with micro-end switch (new!) - 3-axis digital display, professionally mounted (new!)

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 109: other metal working machines
approved
dealer
New in: 1996
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Mot. â Steel bending machine - straight bending Offer number: 19384 Make: KARNASCH - EKAL Type: S 400 Machine No. 030196 Built: 1996 Technical data: - Digital bending angle preselection + bending angle display - Diameter of the bending plate 400 mm - Bending capacity - flat steel up to 50 x 12 mm - Round steel + square steel 18 mm - Built-in angle bend Gr.100E - E.- Foot button - Drive 400 V - Space requirement approx. W 1250 x H 1100 x D 700 mm - Weight approx. 250 kg

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 110 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 7 kg Dimensions (l x w x h) approx.: 300 x 400 x 400 mm Description: CPU: Marvell 6282 1,6 Ghz DRAM: 512 MB DDR3 RAM Flash Memory: 16 MB HDD: 2 x 2 TB 3,5â SATA 3GB/s HDDs LAN Port: 1 x Gigabit Rj-45 Ethernet Port LED Indicators: USB, Status, HDD 1, HDD 2, LAN, Power USB: 1 x USB 2.0 Front, 2 x USB 3.0 Back Buttons: System, Power, One touch copy, Reset Abmessungen: H=165,5 x B=85,5 x L=218,4 mm Power-Modes: Sleep 6W, Operationsmode ca. 13-15W Secure Design: K-Lock security slot for theft prevention

Category: 101: boring mills and machining centers
approved
dealer
New in: 2013
Price: 240.000 €
Location: Land-de DE Niedersachsen
Seller: W&T EFRA

CNC Machining Center MATSUURA Maxia H. Plus 405 Built in 2013 with a 6-pallet round storage Control Siemens 840Di X-axis 660 mm Y-axis 660 mm Z-axis 660 mm Speed spindle: 40 - 12000 rpm (Opt. 20000) Horizontal machining center with pallet space for 6 pallets 500 x 500 mm Precision NC round table Path measuring system Heidenhain HSK 63 Magazine with 320 seats Knoll coolant system with 70 bar/31 lpm, LTA air filter Tool breakage monitoring Renishaw Button OMP 60 Coolant spray gun for working room and set-up station Cutting force monitoring 99 Workpiece coordinate systems Cylinder interpolation

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 110 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 7 kg Dimensions (l x w x h) approx.: 300 x 400 x 400 mm Description: CPU: Marvell 6282 1,6 Ghz DRAM: 512 MB DDR3 RAM Flash Memory: 16 MB HDD: 2 x 2 TB 3,5â SATA 3GB/s HDDs LAN Port: 1 x Gigabit Rj-45 Ethernet Port LED Indicators: USB, Status, HDD 1, HDD 2, LAN, Power USB: 1 x USB 2.0 Front, 2 x USB 3.0 Back Buttons: System, Power, One touch copy, Reset Abmessungen: H=165,5 x B=85,5 x L=218,4 mm Power-Modes: Sleep 6W, Operationsmode ca. 13-15W Secure Design: K-Lock security slot for theft prevention

Category: 1402: other machines for mechanical handling
approved
dealer
New in: 2018
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

Lifting device Lifting scaffolding heavy load Manufacturer: Schmidt Type: 9001 Built: 2018 Lifting height: max. 600 mm Total load: max. 250 kg Fork area: 760 x 560 mm Stroke control with button ON / AB Reference Number: SCHM1434

Category: 207: gluespreader machines
approved
dealer
New in: 2004
Price: used machinery auction RESALE 10.000 €
Location: Land-de DE Hungary, 9900 Körmend
Seller: Surplex GmbH

Weight approx.: 8700 kg Dimensions (l x w x h) approx.: 10045 x 910 x 1740 mm Description: HOMAG OPTIMAT KAL 310/9/A20/S2 Edgebander - Running-in aid for narrow parts (60mm) - edge magazine 6-track + with wooden strip magazine max 66x20mm - Granulate preheater station - Glue container (reserve, exchangeable) - Slide edge milling cutter D125/H66mm - Pressure rollers (electronically adjustable, pneumatic spring-loaded) - Manual control unit - Cross-cut saws with chamfer cutting function - Pre-milling unit (straight) up to 20mm glue thickness - Form trimming unit with tool changer (postforming and automatic adjustment) - Tool changer 8-fold (for shaping trimming unit) - Form trimming unit with  ...

Category: 709: other food machines
approved
dealer
New in: 2003
Price: request quote
Location: Land-de DE 83395 Freilassing, Breslauer Str. 41a
Seller: Project Organisation Alexander Torlach GmbH

Manufacturer not known to be identical to ALLGAIER WS-R-V-CT. Condition Used, good conditions, cleaned, as-is Details Diameter: approx. 1,200mm Container volume: approx. 500 l Version: stainless steel/stainless steel Weight: about 980kg Facilities Agitator drive with 1 pc Danfoss Bauer Geared motor BK '40Z-31V/D08LA4, normal steel lacquered 0.75kW, 1,400/9.8rpm, 230/400V, 50Hz, IP 65 Vibration drive with 2 pcs. Friedrich Vibromotore RT149-8 stainless steel, centrifugal force 4.5kN, 0.3kW 740rpm, 230/400V 50Hz, IP 66 electr. Locking container with 1 pc. pcmagnetic switch 400V 6A, locking housing bottom ON/CLOSE 1 pc. pcmagnetic switch 400V 6A, siring container hood  ...

Category: 1107: other energy machinery
approved
dealer
New in: 2019
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Spain, 24392 Villadangos del Páramo
Seller: Surplex GmbH

Weight approx.: 1050 kg Dimensions (l x w x h) approx.: 2200 x 890 x 1200 mm Description: NEW MODEL YEAR 2019. Speed/Frequency 1500 rpm, 50 Hz. Main power (KW/KVA) 40/50. Voltage, phases and wiring 400/230V, 3 phases and 4 cables. Power factor 1/220 0.8/380. Soundproofed. DIESEL ENGINE ZH4100ZD. Features of the 4-cylinder, water-cooled, 4-stroke, direct injection engine. Maximum power 41 kW. Turbo aspiration. Bore (mm)xStroke (mm) 100x115. Compression ratio 19. Consumption (g/kw.h) 239. Displacement 3.61. Water-cooled with radiator. 24V electric starter system. Mechanical motor speed adjustment. Sound level (A) @ 7m <,70 dBA. Alternator LUCLA LU40KW. Self-excited with brushes. Insulation t ...

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
approved
dealer
New in: used
Price: 1.480 €
Location: Land-de DE 97786 Motten, Hammerweg 13
Seller: Statt Nahrungsmittelmaschinen

Feuma HU1020 Multi-purpose Kitchen Machines Drive current new list price of the drive: 3070,- EUR net two speeds Impulse button Safety shutdown with pressure flap control without feet, as previously mounted on base we are happy to offer you used or new accessories for the machine Machine must be thoroughly cleaned before use Video about test run available

Category: 102: lathes
approved
dealer
New in: 1960
Price: request quote
Location: Land-de DE Germany, 97232 Giebelstadt
Seller: Surplex GmbH

Weight approx.: 3650 kg turning diameter over slide: 250 mm turning length: 2000 mm Dimensions (l x w x h) approx.: 4000 x 1500 x 1500 mm turning speed range: 22 - 1120 rpm total power requirement: 11 kW Description: including copying unit copying travel longitudinal: 2000 mm voltage: 380 V There can be turned parts up to dia. 250mm and lenght 2000mm, with chuck or between centers. With the machine will be delivered chuck, lynette, oil bassin with high pressure pump, manual in German language and separate OUT-Button.

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
approved
dealer
New in: used
Price: 3.650 €
Location: Land-de DE 97786 Motten, Hammerweg 13
Seller: Statt Nahrungsmittelmaschinen

Stephan UM24A Universal Machine with two speeds as well as pulse buttons with knife insert tiltable for removing the processed medium Machine is in condition as returned by the customer and should therefore be thoroughly cleaned before use Video about test run and other pictures available

Category: 103: milling machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: DMG MORI Used Machines GmbH

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Technical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minWorking area 1Longitudinal500 mmCross450 mmVertical400 mmFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.4700 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemTable surface Ø 630 x 500 mmMaximum load (table centre) 200 KgSlot width 14 m ...

Category: 107: sheet metal working
approved
dealer
New in: 1986
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Hydr. Flat, - Profile and bar steel shears with cut-out device and punch punch Offer number: 15229 Make: MUHR + BENDER Type: KBLH 700 Machine no: 01562869552445 Built: 1986 Technical data: - two separate working cylinders, - it can be used at two workstations - work at the same time - Flat steel shears - knife length 520 mm - for flat material 500 x 18 mm - Profile steel shears - L- steel at 90° 130 x 12 mm - at 45° 90 x 10 mm - T-steel at 90° 180 mm - Bar steel scissors - Round steel 65 mm - Square steel 60 mm - Cut-out device - rectangular tool for material up to 12 mm - Punching hole - Punching force approx. 700 KN - Stroke infin ...

Category: 107: sheet metal working
approved
dealer
New in: 2013
Price: request quote
Location: Land-ch CH Tägerwilen
Seller: Oskar Broziat Maschinen AG

Machine equipment - Stable machine frame for standing and sitting operation - Ram, optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning - Ergonomic Machine design Back Gauge System - Highly-dynamic safety 3-axis backgauge system: X1, R1, Z1 - one stop finger - Fiberglass gauge finger with hardened metal stop Tool Holder - Manual upper tool clamp, not hardened - Manual lower tool clamp, hardened Control - Integrated Machine controller TASC6000 with numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequen ...

Category: 107: sheet metal working
approved
dealer
New in: 1983
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Mot.-Lochstanze Offer number: 19379 Make: PEDDINGHAUS Type: FORAX 15 Machine no: 4210253083001 Built: 1983 - good condition Technical data: - Printing power 150 KN - holes e.g. - up to 27 mm in steel 4.5 mm - or up to 16 mm in steel 8 mm - with special punching saddle - up to 39 mm in steel 3 mm - up to 58 mm in steel 1.5 mm - Stroke number 72 rpm - Extension 400 mm - Installation height 140 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1550 x H 1700 x D 1000 mm - Weight approx. 400 kg - with: - E.- Foot button - grain search device, - Support table B 1500 mm - Org. Steel podium - 10 pcs hole stamp + die

Category: 2000: spare parts
approved
dealer
New in: 2005
Price: request quote
Location: Land-uk UK Essex
Seller: PostIndustry

This listing is for a MANROLAND BT02 Button Station with Display. We have multiple units in stock and offer competitive pricing on bulk orders. In the unlikely event that your purchase is dead on arrival all our elecrical components are sold with a quibble free return and replacment policy.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)