We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,950 used machines on RESALE, but how to find them? Machine Search
used
Automatic band sawing machine with bow movement, vices and hydraulically controlled advancement. Blade descent and ascent controlled by feeler. Cutting progress with infinitesimal adjustment. Manual setting of the cutting length via handwheel, quantity of pieces to be cut and machine functions managed by PLC. Mechanical blade tensioning controlled by limit switches. The machine is complete with protective casing, double safety button for starting the cycle and low voltage electrical system according to CE regulations. Cutting capacity Round + 90° 280 mm + 60° 140 mm + 45° 225 mm Painting + 90° 240 mm + 60° 140 mm + 45° 215 mm Dish + 90° 330 x 240 mm + 60° 140 x 130 mm + 45° 230 x 140 mm Cutting speed 35 – 70 m/min Work surface height 835 mm Blade motor 0.9 – 1.5 kW (V400) Hydraulic control unit motor 0.37 kW Coolant pump motor 0.12 kW Ca ...
new
: neu : ca. 8 Wochen ab Auftragse : Spanien : 5410 € : 111.99 € : 18 mm : MK 3 : 250 mm : (10) 245 - 355 - 490 - 71 U/min : M18 : 1030 mm : 600 mm : 1950 mm : 230 kg : 120 mm : 200 - 530 mm : 270 x 270 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Manual feed Electronic variator drive Fixed base with t-slots, height adjustable and rotating headstock Base cabinet with doors and drawer Lightning equipment Tool ejector Emergency push button Turning sense selector CE norms Options: Tapping device (IR/RS) € 785,-- Electronic speed variator incl. digital read out (VE+TAK) € 1.265,- A) 120 - 760 B) 170 - 1100 C) 400 - 2580 D) 600 - 3800 E) 950 - 6000 1/min Digital read out for depth € 620,- Base cabinet with doors and drawer € 1.245,- Coolant equipment € 880,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 6340 € : 131.24 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : M22 : 800 mm : 600 mm : 1450 mm : 240 kg : 120 mm : 155 - 485 mm : 270 x 270 mm : 100 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Manual feed Gear driven Fixed base with t-slots, height adjustable and rotating headstock Lightning equipment Tool ejector Emergency push button Turning sense selector CE norms OPTIONS: Tapping device (IR/RS) € 785,-- Electronic speed variator incl. digital read out (VE+TAK) € 1.245,- A) 45 - 125 B) 125 - 370 C) 380 - 1070 D) 1100 - 3100 1/min Digital read out for depth € 620,- Base cabinet with doors and drawer € 1.245,- Coolant euqipment € 880,- (Sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 6150 € : 127.31 € : 25 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : M22 : 800 mm : 600 mm : 1450 mm : 240 kg : 120 mm : 155 - 485 mm : 270 x 270 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Manual feed Gear driven Fixed base with t-slots, height adjustable and rotating headstock Lightning equipment Tool ejector Emergency push button Turning sense selector CE norms OPTIONS: Tapping device (IR/RS) € 785,-- Electronic speed variator incl. digital read out (VE+TAK) € 1.245,-- A) 45 - 125 B) 125 - 370 C) 380 - 1070 D) 1100 - 3100 1/min Digital read out for depth € 620,- Base cabinet with doors and drawer €1245,- Coolant equipment € 880,- (Sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Sigma 2-5 Centrifuge. Condition: Good. Characteristics: Centrifugation speeds of up to 3900 rpm. A wide choice of reduction inlets and multiple holders for a variety of different tubes allow universal use. Simple 2 button preselection of speed / RCF and time. Short operation with display in cycle of seconds. Electronically regulated times of up to 30 minutes or continuous operation can be selected. Efficient electric brake for short deceleration and gradual stop for sensitive sedimentations. A double cover closing and locking mechanism in accordance with German accidentprevention regulations (VBG 7z). An LED indicator signals the stop of the rotor and the opening of the cover. Indication of speed / RCF and time. Product complies with national and international safety regulations (IEC 1010, CE).
used
Description: Ventilated benchtop centrifuge Mega Star 600, brand VWR Condition: Excellent, Year of purchase: End 2018. Price Characteristics: Benchtop centrifuge ideal for a wide range of applications such as the research in the pharmaceutical and biotechnology industry and research university. Auto-Lock 3 rotor locking system: Rotor change without tools at the touch of a button; users can quickly change the rotors and easy access to the rotor chamber for cleaning. ClickSeal aerosol-tight bucket sealing system: user-friendly one-handed gloved opening/closing, no need for screw caps or complex clips. SMARTSpin technology optimises acceleration, residual braking and residual load imbalance for maximum safety, regular analysis and reproducible separations. The pulse function saves time for short analyses. Intuitive controls and a large, bright LED display make operation easy. and ...
used
band width: 30 mm product width: 30 - 310 mm product height: 5 - 200 mm Output max. (minute): 23 Stück - Desktop device - Easy handling - Quiet and fast - Automatic start cycle - Cycle start via push button - Quality product Made in Germany - Product width 30-310 mm - Product height 5-200 mm - Tape width 30 mm - Paper bands (70-90g) and foil bands (100-130 µm) can be used without conversion - Output up to 23 bands/minute depending on package size - Stepless adjustment of the belt tension (prevents damage to the packaged goods) - Paper loop infinitely adjustable Technical specifications: Dimensions (LxWxH): approx. 540 x 350 x 420 mm Connection values: 220 V/50 Hz Weight: about 32 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
4-sided planer Fabr. Vinous Type U 23 E blue class YOC 2001 with 6 spindle + horizontal sawing unit 1 Sp. U-5,5 Kw 2-3 Sp. R/L 7.5 Kw 4 Sp.R 5,5 kw 5 Sp. Ø 7,5 Kw 6 Sp. U 5,5 Kw 7 horizontal sawing unit 2.2 kw (glazing bead saw) with button pressure yes-no Working width 20-230 mm Working height 8-120 mm Spindle 40 mm Feed rate 5-24 m/min 4 Kw Dressing table 2.5 m manuele waxilite pump two driven rollers in machine table
used
Working width: 3050 mm Working height: 2050 mm Number of cylinders: 6 St. Dimensions (L/W/H): 3970x950x2400 mm Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation ...
used
Description: 2x hanging button control bottle hand control crane 77325544 Manufacturer: DEMAG, Type: D-Grip, 2 pieces of crane control with 2 selection buttons Suitable for: crane systems, work platforms, chain hoists, and much more. Width 90mm x length 280mm Industrial design Operating voltage Uni: 150 V AC-4 and 2.5A AC-3 le 6A / AC-11 le 1A / Ithe 16A Protection class IP65 Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 1,5 kg
used
W+H MATADOR Paper bag making machine (Flat & Satchel) Bag width: 50 – 310 mm Cut off length: 120-320 mm – 330-1560 mm Gusset depth up to 80 mm Max web width: 960 mm Speed up to 700 bags/min Counter of the number of paper bags Modernized electric system with push button control
used
Cavecchi Tagliatrice Cheese wire cutting machine Stainless, twin push button for start up, two speeds, with food pedal, 3Ph
used
Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button
used
Factory new hydraulic press brake: UP-TEC type Ubend 100 t rb: 2022 The machine is covered by a 24-month warranty. We provide commissioning of the machine and professional training, special service care during the warranty and post-warranty period. Equipment: Delem DA58T controller Controlled axes Y1,Y2,X,R Stroke 270mm, undercut body depth 450mm X axis stroke=750mm X-R axis buffer: Mitsubishi Servo Motor and linear guide, ball screw system Promecam type tool clamping system Illumination of the working part of the machine Rear optical barrier Automatic table compensation system AKAS laser protection of CE standards Bumper fingers pcs. 2 Front supports pcs. 2 Side guards of the working space Machine interior lighting Portable foot control with emergency button Set of high-quality punches and dies European hydraulic system Bosch-Rexroth, Hoerbiger European electrical sy ...
used
Wittmann/Battenfeld Makro Power E 450/2250 injection molding machine Year of production: 2013 Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum mold mounting height: 330mm Maximum mold mounting height: 780mm Screw diameter: 65mm Specific injection pressure: 2070 bar Maximum injection weight: 980.9g ServoPower S1 package (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with a jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity consumption costs and supports precise regulation of the injection process) Electric ejector with a force of 60 KN and a path of 180 mm Additional equipment: 1. Air valve 2. Cooling water flow regulator 3. Digital interface to the temperature controller (possibility to control six thermor ...
used
Model: JDM650-BIB Function: High-speed, Automatic Bag In Box Bag Making Machine; Tap & Nozzle Automatic Put Online Feature: 1. Bag have 4pcs film; 2. Punch on film, then welding nozzle, make bag; 3. Two units main unwinding; 4. Inverter motor control unwinding continuously, loop control system control tension steadily and reasonably; 5. Triple AC servo motor infeed film, ensure system tension reasonably and steadily, faster and correct, film non deformation; compare with normal machine, main drive is AC servo motor, ensure high production ratio and enough sealing time; 6. Vertical & horizontal use heating and cooling finalize the design, make sure good sealing; 7. Automatic nozzle structure is consist of nozzle stock bin, lifter, vibrating disk, belt, nozzle; 8. High degree of automation, nozzle reliability, ensure bag cleaning; 9. PLC control whole machine, HMI paramete ...
used
Easy-to-use LCD (electronic) panel. Microprocessor with the possibility of memorizing Teflon-coated welding blade suitable for Polypropylene, polyethylene and polyolefin Welding temperature regulation Extremely safe machine, the welding blade (blade) is located below, if the welding frame goes down and hits the operators hand, it does not hurt him Possibility of packing single packs or multipacks Continuous cycle welding system (automatic lowering of the welding arm can be programmed at time intervals) - we set the pace of work for the operator Or lowering of the welding frame by means of a button Work plane of the machine and tunnel adjustable in height (with a single adjustment we regulate the work plane of the modules) Introduction of the package in the tunnel by motorized belt Automatic collection of film residue Conveyor belt speed adjustable from the panel
used
sheet width: 1050 mm plate thickness: 3.0 mm thickness at Niro-steel: 1.5 mm no. of strokes: 35 Hub/min cutting angle: 2°30 ° engine output: 3.0 kW table height: 810 mm weight of the machine ca.: 1150 kg. range L-W-H: 1300 x 1520 x 1170 mm from a maintenance workshop () Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325126 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Includes tripod, button and charger Approx. Onsite Dimension. (l x w x h): 600 x 500 x 800 mm, weight approx.: 15 kg
used
Single limit switch, Single position switch, Limit switch, MICRO SWITCH HONEYWELL 1LS1-4PG switching capacity: 10 A 1 NC / 1 NO contact IP67 New, with documents ! Dimensions ( single limit button ): 95 x 40 x 56 mm Dimensions ( packaging ): 135 x 85 x 55 mm
used
Equipment/technical data: - e-Motion control with 21" smartouch instead of 10" tempora F 800 Ser - Upper pressure beam motor-controlled, adjustable workpiece height 8-60 mm - Chain feed 12 m/min, 1.5 kW, Minimum workpiece length 140 mm - Turntable edge magazine for roll edge material 0.4 - 3 mm and strip magazine for 12 pieces 10 mm edges - Edge feeding for roll and strip material - pneum. Controlled gluing unit, Teflon-coated, for 1.5 kg EVA granules, with synchronized glue roll and quick-change system. (for PUR adhesive processing, taking into account the Adhesive processing guidelines) - Pneumatically operation-controlled pressure unit e-motion (one driven, two conical contact rollers) tempora 60.12/2: 0-12mm - Impact shears for roll material - Cross-cut saw with 2 motors - Joining milling unit 2 x 1.5 kW - Upper and lower combination milling unit, 0.75 kW each, flush a ...
used
Single limit switches, Single position switches, Limit switches, Roller levers HONEYWELL BZE7-2RQ8-C switching capacity: 10 A 1 NC / 1 NO contact IP50 New ! dimensions ( single limit button ): 77 x 25 x 77 mm Dimensions ( packaging ): 125 x 125 x 50 mm
used
pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...
used
Key data: 5 A, 80 V, 400 V
- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V ...
used
Doughnut baker with a settling cart. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.
used
The machine contains the components from the large-scale series of the powerful WEINIG class Working width 20 – 260 mm / carpentry version Working height 8 – 160 mm 5 working spindles DM 40 mm Long inlet work table - 2000 mm 5 working spindles, bottom 5.5 kW, left + right 7.5 kW, top 7.5 kW, plaster bottom 11 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 – 24 m/min. ATS system: Up to 98 workpiece dimensions can be programmed and called up at the touch of a button Left and upper spindle drive auto. in position Machine in CE design Built in 1998 Without editing tools
used
Column drill ALZMETALL type AX 2/S Fabr. No. 1761 Year of construction 1989 Drilling capacity 20 mm Spindle holder MK 2 - long quill Projection 250 mm Pinol stroke 90 mm Table size 370 x 250 mm Column diameter 90 mm Spindle speed 450 - 4300 rpm infinitely variable Motor power 0.55 kW Mains connection 400 volts, 50 Hz spindle speed infinitely variable via variator belt drive drilling table Height adjustment via hand crank - Quick-action drill chuck RÖHM 1 - 13 mm - Emergency stop button Space requirement L x W x H 800 x 600 x 1700 mm Weight 140 kg very good condition; used
used
bore capacity in steel (diameter): 36.0 mm bore capacity in cast iron: 42.0 mm throat: 230 mm morse taper: 4 MK bore stroke: 160 mm table:: 620 x 470 mm turning speeds: 295 - 3400 U/min feed: 0.1 - 0.2 - 0.3 mm/U total power requirement: 1.4 / 2.2 kW weight: 470 kg range L-W-H: 700 x 850 x 1900 mm maintained condition () current new price approx. 18.000 euros Special price on request Furnishing: - electromagnetic feed clutch with overload protection and electric cross-grip switch - Mushroom push button (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - digital speed display - digital drilling depth display including 0-point definition (start of drilling) - R / L barrel of the drill spindle - Pole-changing drive motor - infinitely adjustable drilling depth stop - Work table with 2x T-slots - height adjustable - Coolant base plate with machined wo ...
used
pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...
used
puncher: 55.0 t round bar steel: 40.0 mm square edge steel: 40.0 x 40.0 mm L-beam: 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.): Ø 40.0 x 10.0 mm shear: flat material: 300 x 15 / 200 x 20 mm total power requirement: 3.0 kW weight: 1320 kg range L-W-H: 1600 x 800 x 1680 mm good condition - barely used () current new price approx. 18.600 euros Special price on request Furnishing: - electro-hydraulic profile steel shear with 4 work stations Flat steel scissors Profile steel scissors Hole punch Notching station - electrical contact length stop - continuous stroke adjustment - Support table at hole punching & notching station including sliding stops - 2x freely movable foot switches - Material scraper - side storage options - various accessories - Emergency stop button - Connection cable including 16A plug - Operation manual Machine link: https://mhp.logotech.de/h ...
used
Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Coolant device - Machine light - Machine feet
used
Specifications: Tool holder: MK 4 Travel (X/Y/Z): 450 / 210 / 650 mm Speed range: 60 - 1350 1/min Spindle stroke: 150 mm Table size: 800 x 240 mm Feeds: 0.04 - 0.16 Projection: 250 mm Motor power: 2.2 kW Connection: 400 V Dimensions (WxDxH), approx.: 1460 x 1290 x 1900 mm Equipment: - Coolant device -Cross table - Machine lamp - Emergency stop push button
used
Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feed rate: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch faces - Emergency stop push button - Bed stop - Machine light - Coolant device - Machine feet
used
Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Machine light - Coolant device - Machine feet
used
x-axis: 2000 mm y-axis: 1500 mm z-axis: 750 mm burner heads: 1 3 D laser capacity in Watt: 2700 3D laser cutting and welding system TruLaser Cell 7020 Machine no. A0421A0099 Type: L13 standard equipment - X = 2000, Z = 750mm, B = +/- 135°, C = n x 360° - Laser TruFlow 2700 - Position laser diode - Stationary, rotatable pendant control panel - Teach panel - Teach software - Magnetic clutch, head detection - Laser power control - Power Cycles - Logbook function - focus line - Nitrogen jet aeration - Network connection including installation via teleservice - Analog modem for teleservice - Lighting boom - Documentation twice Deviating from this standard equipment or in addition the machine TruLaser Cell 7020 is equipped with: With the following configuration: Frequency 50Hz Voltage 400 V0 Electrical regulation IEC Language operating instructions German Number of operating instructions 2 p ...
used
Description: Precise, smooth-running standard drilling machine in a modern design. Many options included. - Emergency stop push button - Full engine protection - Spindle / base plate distance 529 mm - T-slot width 10 mm Drilling capacity in steel 14/15 mm Projection 180 mm Drilling stroke 70 mm Speed 420 - 2100 U / min Table 250 x 220 mm Distance drilling head - clamping surface max. 380 mm Total power requirement 0.5 / 1.0 / 400 kW / volt Column diameter 65 mm Tool holder MK 2 Machine weight approx. 0.08 t Dimensions L x W x H 0.4 x 0.5 x 0.9 m Approx. Onsite Dimension. (l x w x h): 400 x 500 x 900 mm, weight approx.: 80 kg
used
Laser diffuse mode sensors, diffuse sensors, photoelectric sensors IFM EFECTOR OJ5154 OJHLFPKG/SO/AS Sensing distance: max. 15 - 200 mm < (br /> Operating voltage: 10 - 30 V DC Current consumption: 13 mA Material: Housing: ABS, LED window: SEPS, Button: SEPS Optical material: PMMA Electrical connection: Plug connection: 1 x M8, Code: A used, tested ! Dimensions: 20 x 8 x 8 mm
used
Laser diffuse sensors, diffuse sensors, photoelectric sensors IFM EFECTOR OJ5136 OJPLFPKG/SO/AS range: 8 m Operating voltage: 10 - 30 V DC Current consumption: 15 mA Material: Housing: ABS, LED window: SEPS, Button: SEPS Optical Material: Glass Electrical connection: Plug connection: 1 x M8, Coding: A used, checked ! Dimensions: 44 x 32 x 11 mm
used
Baader IS693S descaling machine, produced in 2017 and recently overhauled, is designed for high-speed descaling operations. It features six descaling spindles, three positioned above and three below the fish. Each spindle has a unique shape, enabling effective descaling of rounded fish such as Salmon, Haddock, Ocean Perch and similar fish weighing between 0.3 and 3 kg, as well as similar species. The machine’s speed can be adjusted smoothly using a single button, offering flexibility during operation. It is suitable for installation either onshore or offshore, depending on the requirements. Technical Specifications: • Power Consumption: 4 kW • Water Consumption: 20 liters per minute at 2 bar pressure, 30 liters per minute at 5 bar pressure • Net Weight: 365 kg”
used
WMF 1200 S coffee machine with Cup & Cool milk cooler and cup warmer, with bean container, milk system, with jug function, cleaner tablet insert, display, various drinks adjustable, hot water button, with operating instructions, plus side device Cup & Cool, cup warmer and milk cooler, incl. 2 softener cartridges, year of construction 2016
used
Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light
used
Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 63 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 5 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 - 0.800 mm/rev Weight, approx.: 1500 mm Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 3-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Bed stop - Rotating grain tip - Coolant device - Emergency stop push button - Machine light
used
This HÃLLER HILLE NBH 135 Speed Horizontal Machining centre was manufactured in the year 2004 in Germany. It is equipped with a Sinumerik 840d control unit. It is included with a double chamber filter 60mü for internal coolant supply (advance warning). The machine disposes of a chip conveyor in scraper belt design, a Renishaw measuring system with measuring probe and tool breakage control parallel to production time (mechanical button) in the tool magazine incl. devices and clamping angles.
used
2 doughnut bakers with two weaning trolleys. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.
used
Tenoning spindle: 1 Stk. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 for window and door production with 50 mm spindles in the longitudinal profiling. With the following processing stations and options: - One-sided slot machine for straight and sloping connections - Milling machine with glazing bead cutting unit for longitudinal profiling - Circumferential operation with synchronous milling unit and automatic immersion. - Swivel frame support up to 650 mm - Fitting grooving unit - Central control 1.0 crosscut saw automatically plunging in from above - Engine power, including engine brake 3.0 kW - Spindle speed 2800 rpm. - Flight circle diameter 350 mm - Spindle diameter 30 mm Æ - Clamping flange, 1 driver 6 mm Æ TC 42 mm 120 mm dia. - Pneumatic vertical stroke 100 mm - Pneumatic horizontal stroke 160 mm against 2 manual 6-fold turret stops - Chip extraction hood wit ...
used
Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Grinding wheel bore approx. 51 mm - Disc speed approx. 1450 rpm - Drive 400 V / 0.9 kW - Working height approx. 1100 mm - Emergency – Off button - Base cabinet with 2 doors - Space requirement approx. W 800 x H 1150 x D 350 mm - Weight approx. 150 kg - Year of construction approx. 1995
used
Description: with attached vice, button width approx. 150 mm, 2 tool setting devices, ,parallel pads, files and a hammer weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 960 x 1,100 mm
new
x-travel:1500 mm y-travel:650 mm z-travel:500 mm table-size:500x2200 mm spindle drive:11 kW max. table load:1200 kg T-slot (width-distance-quantity):20mm x 100mm x 4 spindle taper ISO:50 spindle speed:6-300 1/min, 30-1500 1/min / 2 stufig universal head:360° (manuell schwenkbar) distance spindle center to table:vertikale Spindel: 6? 650 mm distance spindle center to table:horiz. Spindel: 8-660 mm feeds:2.5-3000 /2.5-2500 mm/min rapid speed:6000 / 6000 / 3000 mm/min power of feed servo motor :18/23/18 Nm Overall size:3220 x 2420 x 2800 mm Weight approx.:7300 kg ISO50 end milling tool shank Dia. 27mm:27mm, 1 Stück hand wheels:elektrisch, für alle Achsen screws cover:wegklappbar Features of bed type milling machine ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casti ...
new
x-travel:900 mm y-travel:650 mm z-travel:450 mm table load:800 kg :1235x460 mm T-slot (width-distance-quantity):5 x 18 x 80 mm spindle taper:40 ISO turning speed range:(27 Stufen) 30 - 2050 U/min distance spindle nose and table:32 ? 482 mm feeds:X/Y/Z: 10-1000 / 10-1000 /6-640 mm/min rapid travel x/y/z:2200 / 2200 / 1100 mm/min power capacity:5,5/7,5 kW weight of the machine ca.:4 t machine dimensions LxWxH:1835 x 2362 x 2090 mm universal milling head:manuell schwenkbar, 360° Servo motors:in allen Achsen CNC controls from:Siemens/Fanuc/Heidenhain Features ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? Fine elaborate workmanship with great care and neat appearance with perfect paint finish. ? Precision-ground ...
new
x-travel:1200/1500 mm y-travel:700 mm z-travel:500 mm :500 x 1600 mm (Option: 500x2000) mm max. table load:1800 kg T-slot (width-distance-quantity):5 x 18 x 80 mm spindle taper:50 ISO turning speed range:(27 Stufen) 30 - 2050 U/min distance spindle nose and table:25? 525 mm feeds:X/Y/Z: 10-1000 / 10-1000 / 5-500 mm/min rapid travel x/y/z:2200 / 2200 / 1100 mm/min power capacity:7,5 kW weight of the machine ca.:5 t machine dimensions LxWxH:2475 x 2260 x 2180 mm universal milling head:manuell schwenkbar, 360° Servo motors:in allen Achsen CNC controls from:Siemens/Fanuc/Heidenhain Features ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? Fine elaborate workmanship with great care and neat appearance with perfect ...