burners used for sale

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

Description: • Lot of 2 gasoil burners • It includes: • 1 x ELCO EK3.50L-ZA burner: voltage 230/400 V, nominal heat output 530 KW-455800 kcal/h, consumption 15-45 kg/h • 1 x ELCO EL.03.20 burner: voltage 230 V, nominal heating power 233 KW-200000 kcal/h, consumption 8-20 kg/h Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 70 kg

Unit set for paint booth with speed control and heat recovery: Make : Wolf, Type 4/B-M Year of construction 2009 Dimensions : 1.5 m x 4.2 m x 3.0 m (approx. WxLxH) Heating unit : 209 kW Burners : oil burners, Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1,500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Energy saving : Speed control with frequency converter and heat recovery Pipelines : Supply and exhaust air pipes, deflector hood, air intake hood Electrics : Control cabinet Location : Nuremberg Area Retail price : € 11.900,-, net, ex location

Produced: 2004 Parameters: Table: 2x3m Max head count: 4 Gauge: 2500 mm Cutting width -1 burner: 2100 mm Cutting width -2 burners: 1970 mm Cutting width -3 burners: 1840 mm Cutting width -4 burners: 1710 mm min. Parallel cut: 90 mm Cutting speed: 50-6000 mm/min. Cuttous (standard): do 200 mm Machine width: 3150 mm Machine length: 1320 mm Machine height: 1700 mm Cutting table height: 600 mm Connection voltage: 230V/50Hz

Weishaupt Monarch WM-G10/2-A ZM Burner Scope Weishaupt gas and dual-fuel burners WM10 are suitable for intermittent operation and continuous operation on: • Heat generators according to EN 303 • Hot water systems • Hot water systems •Boiler • Hot air generators • Certain process plants Weishaupt oil, gas and dual-fuel burners of the WM10 series are equipped with electronic interconnection and digital combustion management as standard. Modern combustion technologies in particular require precise and always reproducible dosing of fuel and combustion air. This is the only way to ensure optimum combustion values over a long period of time. Key Benefits • The digital combustion management makes the handling of the burner comfortable and safe. • No additional burner control is required, as the control is taken over by the combustion manager. • Less time i ...

Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...

Paint booth: Make : Wolf Year of manuf.: Cabin 2011, Aggregate 1993 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pcs recessed luminaires with 3 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x50x3 mm Heating unit : 267 kW Oil burners : ELCO brand, alternatively gas burners Dry temperature: 80 degrees C Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 22,800 m3/h; 7.5 kW, 960 1/min Exhaust air unit : 22,500 m3/h; 7.5 kW, 960 1/min Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet The paint booth was originally a Wolf drying booth, but wi ...

machine measurements: Länge ca. 21.000 mm machine weight: -- kg power capacity: 200 kW Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

The oven is modular and has 3 burners (3 separate baking zones) and can be operated with either a steel belt or a net belt. Control cabinet: New Number of burners: 3 (NEW) Delivery time: 4 weeks Total length: 31,000 mm Total width: 2000 mm Working width: 1,000 mm Baking area: 26 m²

Product number: 2703 Type: AFOGRILL-oven 1 Serial number: D143/1 Year of construction: 2005 Heating: natural gas Burners: 3 pieces Honeywell Power: 3 x 380V, 50Hz, 3kW Dimensions: 2300 x 1650 x 2750 mm Weight: 750 kg Type: AFOGRILL-oven 2 Serial number: D143/2 Year of construction: 2005 Heating: natural gas Burners: 3 pieces Honeywell Power: 3 x 380V, 50Hz, 3kW Dimensions: 2300 x 1650 x 2750 mm Weight: 750 kg Transportbelt Belt width: 630 mm Length: 7850 mm Power: 3 x 380V, 50Hz, 0.25kW Dimensions: 7850 x 1150 x 950 mm

Product number: 2739 Type: Afogrill Serial number: G 004A Year of construction: 2007 Heating: natural gas, 100 mBar Heating power: 216 kW Burners: 3 x 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2600 x 1600 x 1800 mm Weight: 600 kg Type: Afogrill Serial number: G 004B Year of construction: 2007 Heating: natural gas, 100 mBar Heating power: 216 kW Burners: 3 x 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2600 x 1600 x 1800 mm Weight: 600 kg Afoheat conveyor Belt width: 330 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 7850 x 1000 x 950 mm

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

4 burner hob with oven Manufacturer: Malag Type: 7-401 Device Type: Floor-Standing Burners: 4 burners Power Type: Electric Oven energy type: Electric Nominal voltage: 380 V Nominal consumption: 10.7 kW Stove tops adjustable in 3 steps Electric oven adjustable from 50° to 300°C Body made of high-quality stainless steel In one piece die-cut hermetic hob More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

FLEISSNER, AB 3,500 mm, with 6 drums, 1,400 mm diameter, built approx. 1985, but overhauled in 2008 and equipped with new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW SIEMENS S7 controller from 2008 with touch screen Motors with frequency converter, 50 m per minute, up to 250 °C

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped  ...

Magra-oil distributor Manufacturer: Magra Type: oil distributor / patch distribution Function: A safe switching distribution when several tanks and burners. Threaded ball valve with mechanical tank locking as a combined suction and return distribution. In very good condition!

Feeder Maber Coater 1 Oven 1st of 10 m and 6 m of coolers and 1 burner New transition system Maber Coater 2 Oven 2nd of 31 m and 6 m of coolers and 3 burners New transitiion system Stacker sizes 1140 x 960 mm.

Used deck baking oven MIWE, type: Ideal 1800.5 FO - In the bakery State baking surface: 18 m² Number of spots: 6 pieces Hearth size: 1,800 x 1,600 mm -With gas - oil burners according to customer requirements - manual control - fully assembled - State: well the stove is technically and visually in good condition and is ready for use immediately. Delivery and installation available on request. We like to overtake even the oven for you.

Biomass Plant, 5 MWel, 50 Hz, yoc 2002, in operation Boiler • Technical data: - Fuel tank capacity: approx. 1 .300 m 3 - Exhaust gas volume 29,000 Nm3/h - Average combustion temperature of 900°C (850 for 2 s.) - Thermal power of the furnace 13 MW - 2 add. Burners 5 MW each - Average calorific value Hu 12,500 kJ/kg - Throughput capacity 3,991 kg/h - Boiler working pressure 41 bar - Superheated steam temperature 420°C - designed amount of steam 14 t/h - Fuels: RDF, wood chips, straw, remains of chipboard, choiceed waste Hours of operation of the entire plant appr. 120,000 hours Steam turbine - TWIN steam turbine KKK, type: CFR 3 / AFA 6 GTA - Generator AvK, type DIG 140 k/4W - Gearbox Renk, type: ELCO W-shape can be inspected in operation this week, - SGS can be ordered for inspection.

Used deck baking oven MIWE, type: Ideal R - In the bakery State baking surface: 18 m² Number of cookers: 5 units Hearth size: 1,800 x 2,000 mm -With gas burners -Oil burner according to customer requirements - computer control - hood with fan - completely assembled the furnace is located in the State of the bakery and is immediately ready for use. Delivery and installation available on request. We like to overtake even the oven for you. Request

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Manufacturer: Solar Turbines INC, San Diego USA Model: Taurus 60 with Solonox combustion, Packager: Turbomach Version: T 7301 Yoc package: 1998 Turbine engine: new engine installed in 2012, only few hours since installation Condition: fully serviced and ready for start. Capacity: 5200 kW Speed: 14.944 U/min continual Fuel: Natural Gas and Light Diesel (dual fuel) Fuel consumption: 122.469 kJ/kWh Burners: 12 Start system: electro.hydraulic, 90 kW Outlet temperature: 486°C Exhaust gas: 21.244 kg/s

Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Deck baking oven W & P, type: Matador MD 101 - In the bakery State - 5 floors - 2 thermal circuits (upper 2 burners and bottom 3 flock) - oil burner weishaupt - 1 stone slab broken but spare available - regular maintenance - last 2016 - in one piece (mounted) -in the bakery condition - condition: good baking surface: 9.6 m2 Hearth size: B T 1.60 x 1.20 m The furnace is located in the bakery. An application is possible in one piece and can be applied on request, like us.

Gas-heated stove Usable dimensions (stove wagon): Depth: 4,000 mm Width: 3,500 mm Height: 1,500 mm Temperature max. 1200 C Working temperature: 980 C Heating capacity: 810 kW divided into 6 burners of 135 kW Drives stove wagon: 2 x 0.75 kW Number of rule groups: 3 Control: Siemens S7 Please note that we use the ovens according to customer requirements (e.g. dimensions, temperature, type of heating).

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

Many thanks for your interest on our second hand machines, please find follow our offer: Like New Condition - fully rebuild in 2016 after never used manufacturer: Probat Type: GP 25 batch roaster output capacity: ca 25 kg/charge different: batch size approx. 25 kg Raw Coffee complete new electric (all control, drives and wires) Cube top of Roaster was redesigned. All electrical parts are NEW. Likewise, all gas components - safety valve, automatic ignition etc .. Sanding, new painting and chromming. New bearings screws etc.. Digital temperature meters and refurbished gas burners and all gas nozels, New motor. Power supply- 3x400Vac. Full Documentation exist for all - electricity and Gas safety. The machine was baught from the last owner in fully rebuild condition 2016 but never used. Is stored in the origin packaging from 2016! We offer this machine in 'as is' condit ...

GE LM2500+ For Sale (31.3 MW, 50 Hz): GE LM2500+ natural gas-fired and associated Aalborg HRSG. The GE LM2500+ has a nominal output of 30 MW. The OCGT originally produced steam for local combined heat and power (CHP”) demand, which no longer exists. Due to this, the HRSG is kept in dry preservation and the OCGT operates using the bypass stack, providing black start and short-term operating reserve capability. Open cycle GE LM2500+ GT driving a 36 MVA generator, which is a totally enclosed air-cooled (TEAC”) design rated at 11 kV. The boiler on this unit is currently in dry preservation. The LM2500+, a design based on the very successful heritage of the LM2500 gas turbine, rolled off the production line in December 1996. The LM2500+ was originally rated at 27.6 MW, for a nominal 37.5 percent thermal efficiency at ISO, no losses and 50 Hz. Since that time, its rating has continually  ...

Qty. 1 Second-hand billet homogenising furnace – still on foundation Mfc.: Pieco Servis Sp.zo.o. Built: 2004 Billet sizes: 7” & 8” x 7000 mm Material: Al alloys series 6060, 6063, 6061 Type of furnace: continuous furnace with a mechanical hearth Ingot size: Aluminum billets Ø 203 and 178; ingot length L = 7000 mm Type of heat treatment: Homegenising process Installed power: Heating: 955 kW Electrial: 50 kW Type of built-in burners: ThermJet Supply voltage: 400 V, 50 Hz Type of heating gas: GZ50 Gas pressure: 150 mbar Furnace performance: 1700 kg/hour 1000 Mg / 25 days (three-shift operation) Unit gas consumption: 27 m³/ Mg Furnace operating temp.: up to 600 °C

CNC Portal Plasma Cutting Machine + Autogen Manufacturer: Messer Type: Omnimat L 5600 Built: 1999 CNC control: Omnicom Track width: 5,600 mm Career length: 25 m Working range: 4 x 22 m 1 plasma torch with hypertherm HD3070 power source 2 car-gene burners 1 powder marker Suction table Filter system Donaldson

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Used multi-story continuous furnace W&P, type: Megador - 7 floors - Top and lower heat can be controlled independently of each other - Net band - Swarming - Touchscreen - WITHOUT boilers, burners and loading - Baking area 120 m2 The oven is out of service. Visit and test run are possible at short notice by arrangement.

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

CNC Portal Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P1 4000 Built: 2009 CNC Control: Vision55 2 autogenous burners 1 plasma burner with power source Kjellberg HiFocus 160i Track width: 4,000 mm Working width: 2,500 mm Track length 18 m (shortenable) without table without filter

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...